Status of antibiotic residues in milk and dairy products of Iran: a systematic review and meta-analysis.

Background: Today, antibiotics are widely used for treatment and feed additives to enhance livestock growth. Antibiotic residues may be found in food of animal origin for various reasons, including ignoring the withdrawal period after treatment, overuse for animals, and contamination of feed with treated animals in animal products. Among animal products, dairy products have a special place in the human diet, and antibiotic residues in them have caused a great deal of concern among consumers. Objective: This systematic review and meta-analysis aimed to evaluate and compare studies conducted in Iran on antibiotic residues in dairy products during 2000-2022. Methods: In this review, 52 eligible studies were collected by searching the Scientific Information Database (SID), Magiran, Google Scholar, Science-Direct, Scopus, and PubMed using the English or Persian keywords such as an antibiotic or antimicrobial residue, Beta-lactam residue, Tetracycline residue, Sulfonamide residue, Chloramphenicol residue, Aminoglycosides residue, Macrolide residue, Quinolones residue, Milk, Raw milk, Pasteurized milk, UHT milk, Powder milk, Cheese, Yogurt, Butter, Cream, Doogh, Kashk, Ice cream, and Iran. Results: According to the reviewed studies, the total prevalence of antibiotic residues in dairy products was 29% (95% CI: 15-43%). Among the seven evaluated antibiotic groups, most studies have been conducted on tetracycline, beta-lactam, and sulfonamide groups, with 16, 10, and 7 respectively, and the highest level of contamination with 663 ± 1540 µg/l is related to tetracycline. Most studies on antibiotic dairy product residues in Iran with 12, 11, and 8 studies are associated with East Azarbaijan province, then Tehran and Khorasan Razavi respectively, and no study has been conducted in 11 provinces of the country. According to the studies, Gilan, Qazvin and Razavi Khorasan provinces had the highest amount of antibiotic residue in milk with an average value of 56.415 ± 33.354, 45.955 ± 4.179 and 45.928 ± 33.027, respectively. Most of the methods used in the studies to measure antibiotic residues in milk were the Copan test kit and the HPLC method, which were used in 19 and 14 studies, respectively. Conclusions: Studies have shown that the prevalence of antibiotic residue in dairy products in Iran is high, so applying an effective strategy and developing the necessary standards in this field to control milk quality is a public health necessity. The findings of this study show that further evaluation of fermented dairy products, especially non-fermented ones such as butter and cream, is needed to prevent adverse health reactions.

Personalized nutrition with 3D-printed foods: A systematic review on the impact of different additives.

Three-dimensional (3D) printing is one of the world's top novel technologies in the food industry due to the production of food in different conditions and places (restaurants, homes, catering, schools, for dysphagia patients, and astronauts' food) and the production of personalized food. Nowadays, 3D printers are used in the main food industries, including meat, dairy, cereals, fruits, and vegetables, and have been able to produce successfully on a small scale. However, due to the expansion of this technology, it has challenges such as high-scale production, selection of printable food, formulation optimization, and food production according to the consumer's opinion. Food additives (gums, enzymes, proteins, starches, polyphenols, spices, probiotics, algae, edible insects, oils, salts, vitamins, flavors, and by-products) are one of the main components of the formulation that can be effective in food production according to the consumer's attitude. Food additives can have the highest impact on textural and sensory characteristics, which can be effective in improving consumer attitudes and reducing food neophobia. Most of the 3D-printed food cannot be printed without the presence of hydrocolloids, because the proper flow of the selected formulation is one of the key factors in improving the quality of the printed product. Functional additives such as probiotics can be useful for specific purposes and functional food production. Food personalization for specific diseases with 3D printing technology requires a change in the formulation, which is closely related to the selection of correct food additives. For example, the production of 3D-printed plant-based steaks is not possible without the presence of additives, or the production of food for dysphagia patients is possible in many cases by adding hydrocolloids. In general, additives can improve the textural, rheological, nutritional, and sensory characteristics of 3D printed foods; so, investigating the mechanism of the additives on all the characteristics of the printed product can provide a wide perspective for industrial production and future studies.

State-of-the-art nanosensors and kits for the detection of antibiotic residues in milk and dairy products.

Antibiotic resistance is increasingly seen as a future concern, but antibiotics are still commonly used in animals, leading to their accumulation in humans through the food chain and posing health risks. The development of nanomaterials has opened up possibilities for creating new sensing strategies to detect antibiotic residues, resulting in the emergence of innovative nanobiosensors with different benefits like rapidity, simplicity, accuracy, sensitivity, specificity, and precision. Therefore, this comprehensive review provides pertinent and current insights into nanomaterials-based electrochemical/optical sensors for the detection of antibitic residues (ANBr) across milk and dairy products. Here, we first discuss the commonly used ANBs in real products, the significance of ANBr, and also their binding/biological properties. Then, we provide an overview of the role of using different nanomaterials on the development of advanced nanobiosensors like fluorescence-based, colorimetric, surface-enhanced Raman scattering, surface plasmon resonance, and several important electrochemical nanobiosensors relying on different kinds of electrodes. The enhancement of ANB electrochemical behavior for detection is also outlined, along with a concise overview of the utilization of (bio)recognition units. Ultimately, this paper offers a perspective on the future concepts of this research field and commercialized nanomaterial-based sensors to help upgrade the sensing techniques for ANBr in dairy products.

Zeolitic imidazolate frameworks (ZIFs): Advanced nanostructured materials to enhance the functional performance of food packaging materials.

Zeolite imidazole framework (ZIF) materials are a class of metallic organic framework (MOF) materials that have several potential applications in the food and other industries. They consist of metal ions or clusters of metal ions coordinated with imidazole-based organic linkers, creating a three-dimensional solid structure with well-defined pores and channels. ZIFs possess several important features, including high porosity, tunable pore sizes, high surface areas, adjustable surface chemistries, and good stabilities. These characteristics make them highly versatile materials that can be used in a variety of applications, including smart and active food packaging. Based on their controllable compositions, dimensions, and pore sizes, the properties of ZIFs can be tailored for a diverse range of applications, including energy storage, sensing, separation, encapsulation, and catalysis. In this article, we focus on recent progress and potential applications of ZIFs in food packaging materials. Previous studies have shown that ZIFs can significantly improve the optical, mechanical, barrier, thermal, sustainability, and preservative properties of packaging materials. Moreover, ZIFs can be used as carriers to encapsulate, protect, and control the release of bioactive agents in packaging materials. ZIFs are capable of selectively adsorbing and releasing molecules based on their size, shape, and surface properties. These unique characteristics make them particularly suitable for smart or active food packaging applications. By selectively removing gases (such as oxygen, carbon dioxide, water, or ethylene) ZIFs can improve the shelf life and quality of packaged foods. In addition, they can be employed to control the growth of spoilage microorganisms and minimize oxidation reactions, thereby enhancing the freshness and extending the shelf life of foods. They may also be used to create sensors capable of detecting and indicating food spoilage. For instance, ZIFs that change color or release specific compounds when spoilage products are present can provide visual or chemical indications of food deterioration. This feature is especially valuable in ensuring the safety and quality of packaged food, as it enables consumers and retailers to easily identify spoiled products. ZIFs can be functionalized using various additives, including antioxidants, antimicrobials, pigments, and flavors, which can improve the preservative and sensory properties of packaged foods. Moreover, ZIF-based packaging materials offer sustainability benefits. Unlike traditional plastic packaging, ZIFs are biodegradable and can easily be disposed of without causing harm to the environment, thereby reducing the adverse effects of plastic waste materials. The application of ZIFs in smart/active food packaging offers exciting possibilities for enhancing the shelf life, quality, and safety of foods. With further research and development, ZIF-based packaging could become a sustainable alternative to plastic-based packaging in the food industry. An important aim of this review article is to stimulate further research on the development and application of ZIFs within food packaging materials.

Rapid and sensitive detection of tetracycline residue in food samples using Cr(III)-MOF fluorescent sensor.

As tetracycline antibiotics were used in the poultry sector, their residue in edible animal products may adversely affect food safety and human health. The development of selective and sensitive tetracycline sensors has garnered a lot of interest due to the complexity of food samples. Therefore, a fluorescent sensing probe based on chromium(III)-metal-organic framework was developed for the rapid detection of tetracycline. After the addition of tetracycline, blue emission at λem 410 nm was effectively quenched by the interaction between TC and Cr(III)-metal-organic framework material. Under optimized conditions (sensor concentration: 30 mg/L and pH: 10.0), the sensing probe showed a fast response time (1 min), and low detection limit (0.78 ng/mL) with a linear range (5-45 ng/mL). Interestingly, the Cr(III)-metal-organic framework was successfully applied to quantity tetracycline residue in chicken meat and egg samples with recoveries of 95.17-06.93%. To deduce, our work can provide a new strategy for the direct detection of tetracycline in food samples.

Analysis of polychlorinated biphenyls (PCBs) in edible oils using the QuEChERS/GC-MS method: A health risk assessment study.

Population growth has made it difficult to provide safe food; because various toxic substances such as polychlorinated biphenyls (PCBs) can contaminate food products such as edible oils which have very high-rate consumption worldwide. Aims of study are to determine the concentration of PCBs in edible oil samples and to evaluate the carcinogenic risk of PCBs in them among Iranian people by Monte Calo Simulation (MCS). After finding the location of high customer hyper market in Tehran, 42 samples of 7 various types of edible oils were collected; then PCBs content of them measured using the modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) extraction method and GC/MS technique. According to the findings the mean level of NDL-PCB in oil samples were ranged from 1.88 to 25.62 ng/g fat. Results of uncertainty analysis showed that among children the 95th percentile of Incremental Lifetime Cancer Risk (ILCR) were 7.80E-3, 5.37E-4, 5.37E-4, 2.00E-3, 1.59E-3, 13.9E-3 and 7.04E-4 for animal oil, corn oil, frying oil, olive oil, bran oil, sesame oil and sunflower oil, respectively. Also, the 95th percentile of ILCR among adults were 4.12E-2, 3.04E-3, 3.09E-3, 1.06E-2, 8.43E-3, 7.38E-3 and 3.74E-3 for animal oil, corn oil, frying oil, olive oil, bran oil, sesame oil and sunflower oil, respectively. The risk evaluation showed that in all edible oils the 95th percentile of simulated ILCR were more than 10-5, so it can be threatening health among both aging groups, although, the producers don't deliberately subject the users' lives to such danger, but high consumption rate and accumulation of PCBs in body tissues are contribute to increasing carcinogenic risk. Also, the 95th percentile of ILCR among adults were more than children, because the edible oil ingestion rate among adults was more than children.

Assessment of cheese frauds, and relevant detection methods: A systematic review.

Dairy products are widely consumed in the world due to their nutritional and functional characteristics. This group of food products are consumed by all age groups due to their health-giving properties. One of these products is cheese which has a high price compared to other dairy products. Because of this, it can be prone to fraud all over the world. Fraud in food products threatens the world's food safety and can cause serious damage to human health. There are many concerns among food authorities in the world about the fraud of food products. FDA, WHO, and the European Commission provide different legislations and definitions for fraud. The purpose of this review is to identify the most susceptible cheese type for fraud and effective methods for evaluating fraud in all types of cheeses. For this, we examined the Web of Science, Scopus, PubMed, and ScienceDirect databases. Mozzarella cheese had the largest share among all cheeses in terms of adulteration due to its many uses. Also, the methods used to evaluate different types of cheese frauds were PCR, Spectrometry, stable isotope, image analysis, electrophoretic, ELISA, sensors, sensory analysis, near-infrared and NMR. The methods that were most used in detecting fraud were PCR and spectrometry methods. Also, the least used method was sensory evaluation.

Multifunctional food packaging materials: Lactoferrin loaded Cr-MOF in films-based gelatin/κ-carrageenan for food packaging applications.

In this study, antimicrobial biocomposite films based on gelatin-κ-carrageenan (Gκ) with 1, 2 and 4 % lactoferrin (L) loaded chromium-based metal-organic frameworks (L@Cr-MOFs) nanoparticles were synthesized by casting methods. The addition of L loaded Cr-MOFs into Gκ based films increased elongation at break from 2.19 to 14.92 % and decreased the tensile strength from 65.1 to 31.22 MPa. L@Cr-MOFs addition reduced swelling index (from 105 to 70.8 %), water solubility (from 61.3 to 34.63 %) and water vapor permeability (from 2.46 to 2.19 × 10-11 g. m/m2. s). When the additional amount was 4 wt%, the Gκ/L@Cr-MOFs films showed antibacterial effects against Escherichia coli and Staphylococcus aureus with the inhibition zone of 19.7 mm and 20.2 mm, respectively. In addition, strawberries preservation trial shown that the Gκ/L@Cr-MOFs films delayed the growth of spoilage molds on the surface of fruits. This research indicated that Gκ/L@Cr-MOFs are promising active packaging materials for the preservation of perishable fruits.

Metal-Organic Framework Fluorescence Sensors for Rapid and Accurate Detection of Melamine in Milk Powder.

In this research, a simple, label-free, and ultra-sensitive fluorescent platform based on a metal-organic framework (MOF) has been developed to detect melamine in milk powder. This fluorescence sensor was fabricated from sensitized terbium (Tb)@NH2-MIL-253 (Al) MOF using a hydrothermal method that involved combining the green emission of Tb (λem = 545 nm) with the blue emission of NH2-MIL-253(Al) MOF (λem = 430 nm) under a single excitation wavelength (λex = 335 nm). The fluorescence sensor was then used under optimized conditions (pH = 9.0; sensor concentration = 30 mg/L; response time = 30 s) to quantify melamine in milk powder. The accuracy, sensitivity, and reproducibility of this sensor were established compared to the high-performance liquid chromatography (HPLC) method. The linear range and lower limit of detection (LLOD, computed with 3σ/S) of the sensor were between 40-396.45 nM (equal to 25 µg/kg-0.25 mg/kg) and 40 nM (equal to 25 µg/kg), respectively, which is much less than the maximum residual level (MRL) for the detection of melamine in infant formula (1 mg/kg) and other foods/feeds (2.5 mg/kg). Additionally, the results had good agreement with the HPLC outcomes, suggesting that the NH2-MIL-253(Al) MOF sensing probe has great precision and repeatability. To conclude, the new fluorescence sensor developed in this study can accurately and sensitively detect melamine in food samples, which may be useful for screening for adulteration of milk powders and other foods.

Value-added utilization of fruit and vegetable processing by-products for the manufacture of biodegradable food packaging films.

Currently, the demand for eco-friendly packaging materials to replace plastic is increasing. Edible or biodegradable packaging films prepared from natural compounds such as proteins, polysaccharides, and lipids have emerged as alternatives to non-biodegradable packaging materials. Fruit and vegetable waste has potential as a bioplastic material promoting environmental sustainability. In this regard, the use of underutilized compounds, such as by-products of fruit and vegetable processing in the production of biodegradable packaging films, is attracting more and more attention due to the availability of raw materials, cheapness, abundance, environmental friendliness, suitable physical properties, unique sensory and nutritional properties, and increased physical properties and functionality. The food industry, such as oil, juice, jam, or sugar production, contributes significantly to food waste generation. The agricultural/food processing by-products such as husks, seeds, offal, leaves, and gums from the production and processing of food contain high amounts of fibrous and plant proteins such as starch, cellulose, and pectin. As a result, food waste can be reused for recycling and high-value-added purposes, reducing environmental pollution and enabling sustainable green development. The present review discusses the use of fruit and vegetable by-products for producing biopolymers as an alternative to synthetic plastic polymers and the application of these biopolymers as value-added functional packaging films and coatings.

Thienopyrimidine-based agents bearing diphenylurea: Design, synthesis, and evaluation of antiproliferative and antiangiogenic activity.

An important role has been considered for the vascular endothelial growth factor receptor 2 (VEGFR-2) in the angiogenesis process, so that its inhibition is an important scientific way for cancer treatment. In this work, new thienopyrimidine derivatives were synthesized and evaluated. Compared with sorafenib, the majority of the target compounds had antiproliferative activity against the PC3, HepG2, MCF7, SW480, and HUVEC cell lines, especially 9h with IC50 values of 4.5-15.1 µM, confirming the noticeable cytotoxic effects on the listed cell lines (PC3, HepG2, SW480, and HUVEC). Analyses by flow cytometry on SW480 and HUVEC cells revealed that 9n, 9k, 9h, and 9q led to apoptotic cell death. The result of the chick chorioallantoic membrane assay showed that 9h effectively reduced the number of corresponding blood vessels. Finally, the inhibitory effect on VEGFR-2 phosphorylation was considered as the outcome of Western blot analysis of compound 9h.

The role of additives on acrylamide formation in food products: a systematic review.

Acrylamide (AA) is a toxic substance formed in many carbohydrate-rich food products, whose formation can be reduced by adding some additives. Furthermore, the type of food consumed determines the AA intake. According to the compiled information, the first route causing AA formation is the Maillard reaction. Some interventions, such as reducing AA precursors in raw materials, (i.e., asparagine), reducing sugars, or decreasing temperature and processing time can be applied to limit AA formation in food products. The L-asparaginase is more widely used in potato products. Also, coatings loaded with proteins, enzymes, and phenolic compounds are new techniques for reducing AA content. Enzymes have a reducing effect on AA formation by acting on asparagine; proteins by competing with amino acids to participate in Maillard, and phenolic compounds through their radical scavenging activity. On the other hand, some synthetic and natural additives increase the formation of AA. Due to the high exposure to AA and its toxic effects, it is essential to recognize suitable food additives to reduce the health risks for consumers. In this sense, this study focuses on different additives that are proven to be effective in the reduction or formation of AA in food products.

New perspectives on electrospun nanofiber applications in smart and active food packaging materials.

Packaging plays a critical role in determining the quality, safety, and shelf-life of many food products. There have been several innovations in the development of more effective food packaging materials recently. Polymer nanofibers are finding increasing attention as additives in packaging materials because of their ability to control their pore size, surface energy, barrier properties, antimicrobial activity, and mechanical strength. Electrospinning is a widely used processing method for fabricating nanofibers from food grade polymers. This review describes recent advances in the development of electrospun nanofibers for application in active and smart packaging materials. Moreover, it highlights the impact of these nanofibers on the physicochemical properties of packaging materials, as well as the application of nanofiber-loaded packaging materials to foods, such as dairy, meat, fruit, and vegetable products.

Electrospinning is a flexible method for smart and active packaging fabrication.Nanofibers can improve mechanical, barrier, and optical properties of packaging.Electrospun fibers can control the release of functional agents to food products.Incorporation of additives in nanofibers makes respond to environmental changes.Application of nanofibers result in improved controlling of food properties.

Recent progresses in the delivery of ß-carotene: From nano/microencapsulation to bioaccessibility.

Beta-carotene (BC) as an efficient pro-vitamin is effective in improving vision, immune system and cognitive function as well as preventing coronary diseases and cancer. However, besides its poor chemical stability, the high lipophilic nature of BC reduces its dispersibility and consequently bioavailability which limits its application into food, pharmaceutical and nutraceuticals. Different carriers with vesicular or particulate structures have been studied and utilized for promoting BC solubility, dispersibility, and protection against diverse operational or environmental stresses and also controlling BC release and subsequent bioaccessibility. The current study, therefore reviews different micro/nanocarriers reported on BC encapsulation with special focusing on its bioavailability. Liposomal structures have been successfully used for enhancing BC stability and bioavailability. Besides, emulsion-based carriers including Pickering emulsions, nanoemulsions and microemulsions have been widely evaluated for BC encapsulation and protection. In addition, lipid-based nanoparticles and nanostructural carriers have also been applied successfully for this context. Moreover, gel structures including emulgels, hydrogels and oleogels are studied in some researches. Most of these delivery systems led to higher hydro-solubility and dispersibility of BC which consequently increased its bioavailability; thereupon could promote its application into food, cosmetic and nutraceutical products. However, for remarkable incorporation of BC and other bioactive compounds into edible products, the safety and toxicological aspects of these delivery system especially those designed in nano scale should be addressed in the further researches.

Smart Biopolymer-Based Nanocomposite Materials Containing pH-Sensing Colorimetric Indicators for Food Freshness Monitoring.

Nanocomposite biopolymer materials containing colorimetric pH-responsive indicators were prepared from gelatin and chitosan nanofibers. Plant-based extracts from barberry and saffron, which both contained anthocyanins, were used as pH indicators. Incorporation of the anthocyanins into the biopolymer films increased their mechanical, water-barrier, and light-screening properties. Infrared spectroscopy and scanning electron microscopy analysis indicated that a uniform biopolymer matrix was formed, with the anthocyanins distributed evenly throughout them. The anthocyanins in the composite films changed color in response to alterations in pH or ammonia gas levels, which was used to monitor changes in the freshness of packaged fish during storage. The anthocyanins also exhibited antioxidant and antimicrobial activity, which meant that they could also be used to slow down the degradation of the fish. Thus, natural anthocyanins could be used as both freshness indicators and preservatives in biopolymer-based nanocomposite packaging materials. These novel materials may therefore be useful alternatives to synthetic plastics for some food packaging applications, thereby improving the environmental friendliness and sustainability of the food supply.

Mitigation of potentially toxic elements in food products by probiotic bacteria: A comprehensive review.

Potentially toxic elements (PTEs) as non-degradable elements (especially carcinogenic types for humans such as lead (Pb), cadmium (Cd), mercury (Hg), and arsenic (As)) are widely distributed in the environment. They are one of the most concerned pollutants that can be absorbed and accumulated in the human body, primarily via contaminated water and foods. Acute or chronic poisoning of humans to PTEs can pose some serious risks for human health even at low concentrations. In this context, some methods are introduced to eliminate or reduce their concentration. While the biological treatment by bacterial strains, particularly probiotic bacteria, is considered as an effective method for reducing or eliminating of them. The consumption of probiotics as nonpathogenic microorganisms at regular and adequate dose offer some beneficial health impacts, it can also be applied to remove PTEs in both alive and non-alive states. This review aimed to provide an overview regarding the efficacy of different types of probiotic bacteria for PTEs removal from various environments such as food, water, in vitro, and in vivo conditions.

Influence of cooking process on the content of water-soluble B vitamins in rice marketed in Iran.

The aim of this study was to analyze the effect of cooking method on thiamin (B1), riboflavin (B2), and pyridoxine (B6) vitamin content of rice samples consumed in Iran by using high-performance liquid chromatography technique. The amount of B1, B2, and B6 obtained ranged from 2.98 to 15.89, 1.15 to 22.19, and 0.96 to 4.44 µg/g, respectively, for the boiling method. In the traditional method, these vitamins had a concentration between 4.09 and 29.55, 4.87 and 16.19, and 1.52 and 12.18 µg/g, respectively. However, limit of detection (LOD) values for B1, B2, and B6 vitamins were 0.159, 0.090, and 0.041 µg/ml, respectively. Multivariate methods and heatmap visualization were applied to estimate the correlation among the type and amount of vitamins and cooking methods. According to heatmap findings, B1 and B6 vitamins and the cooking method had the closest accessions, representing that this variable had similar trends. Nevertheless, it can be concluded that the traditional cooking method can maintain more vitamins in rice samples.

Titanium dioxide nanoparticles as multifunctional surface-active materials for smart/active nanocomposite packaging films.

Environmental issues such as plastic packaging and high demand for fresh and safe food has increased the interest for developing smart/active food packaging films with colloidal nanoparticles (NPs). Titanium dioxide nanoparticles (TNPs) are cost effective and stable metal oxide NPs which could be used as a functional nano-filler for biodegradable food packaging due to their excellent biocompatibility, photo catalyzing, and antimicrobial properties. This article has comprehensively reviewed the functional properties and advantages of TNPs-containing smart/active films. The advantage of adding TNPs for ameliorating food packaging materials such as their physical, mechanical, moisture/light barrier, optical, thermal resistance, microstructure and chemical properties as well as, antibacterial, and photocatalytic properties are discussed. Also, the practical and migration properties of administrating TNPs in food packaging material are investigated. The ethylene decomposition activity of TNPs containing active films, could be used for increasing the shelf life of fruits/vegetables after harvesting. TNPs are safe with negligible migration rates which could be used for fabrication of multifunctional smart/active packaging films due to their antimicrobial properties and ethylene gas scavenging activities.

Derivatization of γ-Amino Butyric Acid Analogues for Their Determination in the Biological Samples and Pharmaceutical Preparations: A Comprehensive Review.

γ-Aminobutyric acid (GABA) plays an important role in regulating neuronal excitability. Four structurally related drugs to GABA including pregabalin (PGB), gabapentin (GBP), vigabatrin (VGB), and baclofen are used for the treatment of central nervous system disorders. These drugs are small aliphatic molecules having neither fluorescent nor strong absorbance in the ultraviolet/visible region; therefore, direct determination of these analytes by optical methods is difficult. Additionally, their high boiling point makes gas chromatography impossible. Accordingly, the amine or acid moiety in these drugs is derivatized in order to improve their selectivity and sensitivity during determination in the biological samples. This review focuses on derivatization based methods and their different reactions for determination of PGB, GBP, VGB, and baclofen in the biological samples and pharmaceutical preparations reported between 1980 and 2020. High-performance liquid chromatography methods coupled with different detectors are a commonly used methods for determination of GABA analogs after derivatization. These methods cover 38.89% of all developed methods for determination of GABA analogs.

Application of Nanotechnology to Improve the Performance of Biodegradable Biopolymer-Based Packaging Materials.

There is great interest in developing biodegradable biopolymer-based packaging materials whose functional performance is enhanced by incorporating active compounds into them, such as light blockers, plasticizers, crosslinkers, diffusion blockers, antimicrobials, antioxidants, and sensors. However, many of these compounds are volatile, chemically unstable, water-insoluble, matrix incompatible, or have adverse effects on film properties, which makes them difficult to directly incorporate into the packaging materials. These challenges can often be overcome by encapsulating the active compounds within food-grade nanoparticles, which are then introduced into the packaging materials. The presence of these nanoencapsulated active compounds in biopolymer-based coatings or films can greatly improve their functional performance. For example, anthocyanins can be used as light-blockers to retard oxidation reactions, or they can be used as pH/gas/temperature sensors to produce smart indicators to monitor the freshness of packaged foods. Encapsulated botanical extracts (like essential oils) can be used to increase the shelf life of foods due to their antimicrobial and antioxidant activities. The resistance of packaging materials to external factors can be improved by incorporating plasticizers (glycerol, sorbitol), crosslinkers (glutaraldehyde, tannic acid), and fillers (nanoparticles or nanofibers). Nanoenabled delivery systems can also be designed to control the release of active ingredients (such as antimicrobials or antioxidants) into the packaged food over time, which may extend their efficacy. This article reviews the different kinds of nanocarriers available for loading active compounds into these types of packaging materials and then discusses their impact on the optical, mechanical, thermal, barrier, antioxidant, and antimicrobial properties of the packaging materials. Furthermore, it highlights the different kinds of bioactive compounds that can be incorporated into biopolymer-based packaging.