RESUMO
The study introduces a novel C3-symmetric ß-diketone compound, BTA-D3, and its monomeric counterpart, D, with a focus on their synthetic procedure, photophysical properties and aggregation behavior. Both compounds exhibit characteristic absorption and weak fluorescence in solution, with BTA-D3 displaying higher absorption coefficients due to its larger number of diketone units. Density Functional Theory (DFT) calculations suggest increased co-planarity of diketone groups in BTA-D3. A significant finding is the Aggregation-Induced Emission (AIE) property of BTA-D3, as its fluorescence intensity increases dramatically when exposed to specific solvent ratios. The AIE behavior is attributed to intermolecular excitonic interaction between BTA-D3 molecules in self-organized aggregates. We also studied fluorescence anisotropy of BTA-D3 and D. Despite its larger size, BTA-D3 showed reduced anisotropy values because of efficient intramolecular energy migration among three diketone units. Furthermore, BTA-D3 demonstrates unique polymorphism, yielding different emission colors and structures depending on the solvent used. A unique approach is presented for promoting the growth of self-organized aggregate structures via solvent evaporation, leading to distinct fluorescence properties. This research contributes to the understanding of C3-symmetric structural molecules and provides insights into strategies for controlling molecular alignment to achieve diverse fluorescence coloration in molecular materials.
RESUMO
A family of (alkylsilyl)pyrene-1-carboxamides exhibits similar mechanofluorochromic responses upon grinding. However, their spontaneous fluorescence recovery processes are distinct despite their similarity in chemical structures and crystal packings. Fluorescence spectroscopy, crystallography, and nanomechanical tests revealed that the chromic direction is dominated by the packing motif, while the fluorescence recovery is driven by the intermolecular interactions and the reversibility of deformation.
RESUMO
Polydiacetylenes (PDAs) are conjugated polymers that have been widely exploited for their chromogenic and fluorogenic transitions upon exposure to external stimuli and biomolecules of interest. Herein, we propose a comparative study of the polymerization dynamics of two diacetylene derivatives, TzDA1 and TzDA2, in the form of aggregates in suspension prepared by reprecipitation method from organic solvents in water, varying the diacetylene concentration and solvent proportions, and sonication in water, varying the time and temperature. Both derivatives bear a tetrazine fluorophore, which serves both to increase the fluorescence quantum yield of the system and to track the polymerization by fluorescence quenching exclusively by the blue-PDA, and differ by the chain termination. It was shown that adding a butyl ester function in TzDA2 to a simple urethane (TzDA1) influences the polymerizability and kinetics of polymerization of the aggregates in suspension. In addition, we showed that also the preparation method and preparation conditions do have an influence on the polymerization dynamics, suggesting that a careful study of these properties should be carried out before investigating the applications of such objects.
RESUMO
We have prepared the first example of a porphyrin linked to an heptazine photoactive antenna. The two entities, linked with an alkyl spacer, demonstrate the activity of both active moieties. While they behave electrochemically independantly, on the other hand the spectroscopy shows the existence of energy transfer between both partners.
Assuntos
Porfirinas , Eletroquímica , Compostos Heterocíclicos com 3 Anéis , Porfirinas/química , Análise Espectral , TriazinasRESUMO
We synthesized two bichromophoric difluoroboron-ß-diketonates (DFB) connected in para and meta positions by using cyclohexane diamine as a chiral bridge (para and meta (R/S)-CyDFB). TD-DFT calculations revealed that the variation in connectivity of the DFB units leads to different spatial arrangements and a chirality inversion of the bichromophoric DFB. Higher gabs values were obtained in (R/S)-CyDFB connected in para as compared to meta position. Aggregation of para (R/S)-CyDFB in mixture of solvents increase the glum values as compared to its monomeric form. Ultrasonication and heating induced the formation of highly ordered nano-helical wires of para (R/S)-CyDFB that increased the glum values to 0.015. On the other hand, meta (R/S)-CyDFB failed to form highly ordered self-assembled wires due to hindered H-binding sites. These observations indicate that the chiroptical properties of DFB bi-chromophore system can be modulated with self-assembly and spatial arrangement of the chromophores.
RESUMO
Developing mechano-responsive fluorescent polymers that exhibit distinct responses to distinct mechanical stresses requires a careful design of the fluorophore in order to tune its interactions with the polymer. A series of mechanofluorochromic (MFC) polymer composites are prepared by dispersing difluoroboron diketonates complexes with various alkyl side-chain lengths (DFB-alkyl) in linear low-density polyethylene. Observation of the resulting polymer composites under a microscope reveals different aggregate sizes of the three DFB-alkyls, thus confirming the functionalization by alkyl side chains as a powerful approach to control the aggregation process in a polymer. Besides, the three polymer composite samples are shown to be sensitive to both stretching and scratching, thereby consisting in the first reported example of MFC polymer responding to these two distinct mechanical stimuli. To establish a structure-property relationship, the strategy consisted in applying controlled tensile or friction forces while simultaneously monitoring fluorescence changes. Interestingly, the intensity of the MFC response to both stretching and scratching depends on the alkyl chain length and thus on the aggregation properties of the fluorophore. According to a time-resolved fluorescence study, the emission is found to originate from different species following the type of applied stress (tensile or friction force).
Assuntos
Fenômenos Mecânicos , Polímeros , Corantes Fluorescentes/química , Polímeros/química , Estresse MecânicoRESUMO
An electroreductive access to gem-difluoroalkenes has been developed through the decarboxylative/defluorinative coupling of N-hydroxyphtalimides esters and α-trifluoromethyl alkenes. The electrolysis is performed under very simple reaction conditions in an undivided cell using cheap carbon graphite electrodes. This metal-free transformation features broad scope with good to excellent yields. Tertiary, secondary as well as primary alkyl radicals could be easily introduced. α-aminoacids L-aspartic and L-glutamic acid-derived redox active esters were good reactive partners furnishing potentially relevant gem-difluoroalkenes. In addition, it has been demonstrated that our electrosynthetic approach toward the synthesis of gem-difluoroalkenes could use an easily prepared Kratitsky salt as alkyl radical precursor via a deaminative/defluorinative carbofunctionalization of trifluoromethylstyrene.
Assuntos
Alcenos , Ésteres , Carbono , Catálise , OxirreduçãoRESUMO
The development of mechano-responsive fluorescent materials is essential for the design and construction of reliable and versatile sensors for mechanical stress. Herein, novel energy transfer-based systems with tetrazine fluorophore and a polydiacetylene (PDA) backbone are synthesized and studied comparatively to a simple polydiacetylene in the form of thin films. Their photopolymerization properties, energy transfer efficiencies and fluorescent response to nanoscale mechanical stimulation are assessed. It is pointed out that the self-assembling group on the PDA chain influences the geometrical arrangement of the chains and the film morphology and, as a consequence, the efficiency and kinetics of polymerization and the energy transfer efficiency. Moreover, we show that the strategy of introducing tetrazine fluorophore provides a new effective route of improving force detectability by fluorescence using polydiacetylenes as mechano-responsive units.
RESUMO
The phase diagram of the Langmuir film of diacetylene alcohol-henicosa-5,7-diyn-1-ol-is investigated by means of surface pressure versus surface area isotherms, Brewster angle microscopy, X-ray reflectivity, and grazing incident X-ray diffraction. Among the usual phases described in the generic phase diagram of small head group molecules, one observes an unexpected reversible transition from an ordered condensed phase to a disordered one upon increasing the surface pressure. We postulate that the origin of this unusual, unprecedented transition results from the competition between the interactions between the diacetylene blocks in the hydrophobic chain and the hydrogen bonds between head groups and water.
RESUMO
A series of acetyl pyrenes and pyrenyl ynones with and without tert-butyl groups showed distinct mechanofluorochromism (MFC). Four pairs of polymorphic solids were found out of six compounds and interestingly, each of them showed hypsochromic, bathochromic or off-to-on MFC. The MFC properties were rationalized by categorizing the packing schemes into herringbone, sandwich, beta and gamma motifs depending on the relative contributions of Câ â â C (or π-π) against Câ â â H contacts. The bulky tert-butyl and trimethylsilyl groups served not only to reduce the number of aggregation patterns but also to prohibit the complete back reactions in solid state. Our results suggest that the simple pyrene derivatives may be promising candidates for a novel group of mechanically-sensitive materials.
RESUMO
A new family of chiral chimeric photo-organocatalysts derived from phosphoric acid were synthesized and their spectroscopic and electrochemical properties were investigated. Then, the ability of these photo-activable molecules to catalyse an asymmetric tandem electrophilic ß-amination of enecarbamates was evaluated.
RESUMO
Mechanoresponsive luminescence (MRL) materials promise smart devices for sensing, optoelectronics and security. We present here the first report on the MRL activity of two ReI complexes, opening up new opportunities for applications in these fields. Both complexes exhibit marked solid-state luminescence enhancement (SLE). Furthermore, the pristine microcrystalline powders emit in the yellow-green region, and grinding led to an amorphous phase with concomitant emission redshift and shrinking of the photoluminescence (PL) quantum yields and lifetimes. Quantum chemical calculations revealed the existence of two low-lying triplet excited states with very similar energy levels, that is, 3 IL and 3 MLCT, having, respectively, almost pure intraligand (IL) and metal-to-ligand charge-transfer (MLCT) character. Transition between these states could be promoted by rotation around the pyridyltriazole-phenylbenzoxazole bond. In the microcrystals, in which rotations are hindered, the 3 IL state induces the prominent PL emission at short wavelengths. Upon grinding, rotation is facilitated and the transition to the 3 MLCT state results in a larger proportion of long-wavelength PL. FTIR and variable-temperature PL spectroscopy showed that the opening of the vibrational modes favours non-radiative deactivation of the triplet states in the amorphous phase. In solution, PL only arises from the 3 MLCT state. The same mechanism accounts for the spectroscopic differences observed when passing from crystals to amorphous powders, and then to solutions, thereby clarifying the link between SLE and MRL for these complexes.
RESUMO
Chiral phosphoric acid based organocatalysis and visible-light photocatalysis have both emerged as promising technologies for the sustainable production of fine chemicals. In this context, we have envisioned the design and the synthesis of a new class of chimeric catalytic entities that would feature both catalytic capabilities. Given their multitask nature, such catalysts would be particularly attractive for the development of new catalytic transformations, tandem processes in particular. Toward this goal, several BINOL-based chiral phosphoric acid backbones presenting one or two visible-light-sensitive thioxanthone moieties have been prepared and studied. The utility of these new photoactive chiral organocatalysts is then demonstrated in the enantioselective tandem three-component electrophilic amination of enecarbamates. Of note, the C1-symmetric organo/photocatalyst has shown a better catalytic activity than those presenting a C2 symmetry.
RESUMO
We have prepared several 2,5,8-trialkoxyheptazines starting from the soluble precursor 2,5,8-tris(3,5-diethylpyrazolyl)-heptazine. We present their synthesis along with their promising spectroscopic and electrochemical properties, which demonstrate large band gaps and high reduction potentials altogether. Subsequently, we provide a short assessment of the promising ability of one of these molecules to perform catalytic oxidation test-reactions.
RESUMO
Aiming to develop a library of organic mechanofluorochromic (MFC) materials, solid-state emission properties of pyrene-derivatives with amidophosphonate groups (diethyl 1-(pyrene-1-carboxamido)alkylphosphonates, alkyl: methyl, isopropyl, phenyl) were investigated. All of these compounds were found to show strong blue fluorescence, and blue-to-green emission shift was identified upon grinding. Monomer and several excimer emissive species were identified by steady-state and time-resolved fluorescence investigations. The characteristic green-to-blue thermal back reaction was observed even at room temperature without additives, which would be related to the flexibility of side groups for molecular rearrangement. We here demonstrated that the pyrene-derived compounds can be attractive platforms to host MFC properties.
RESUMO
We investigate the transition between different regimes of lubrication and directly observe the thickness of nanometric lubrication films with a sensitivity of a single molecular layer at a multi-asperity interface through fluorescence microscopy. We redefine specific film thickness as the ratio of the lubricant film thickness and the surface roughness measured only at those regions of the interface where the gap is "minimal." This novel definition of specific film thickness successfully captures the transition from full elastohydrodynamic lubrication to mixed and boundary lubrication. The transition can be triggered by increasing the surface roughness and is accurately predicted by using the new film thickness definition. We find that when the liquid carries part of the load, its apparent viscosity is greatly increased by confinement, and show how the transition between different lubrication regimes is well described by the viscosity increase and subsequent glass transition in the film.
RESUMO
An OFF to ON mechano-responsive fluorescent polydiacetylene derivative has been prepared by photopolymerisation of a diacetylene covalently linked to a tetrazine fluorophore. This system has been studied at the nanoscale and shows a fluorescence emission intensity that increases with the intensity of the mechanical stimulation in the 20-200 nN range.
RESUMO
A series of organic dyes derived from s-tetrazine have been synthesized, and their photophysical and electrochemical properties are systematically investigated. Testing these compounds as photoredox catalysts in a model oxidative C-S bond cleavage of thioethers has led us to identify new classes of active s-tetrazines. Moreover, some of them can be formed in situ from commercially available 3,6-dichlorotetrazine, making this photocatalyzed C-S bond functionalization simple and highly practical.
RESUMO
In order to improve the remarkable performance of a mononuclear tricarbonyl rhenium(i) complex (ReL1) that exhibits rare aggregation-induced phosphorescence enhancement (AIPE) behavior, two new complexes (ReL3 and ReL4) were prepared and investigated. They incorporate a 2-pyridyl-1,2,4-triazole (pyta) ligand connected to a 2-phenylbenzoxazole (PBO) moiety. Complex ReL3 differs from ReL1 by the presence of a bulky tert-butyl substituent, and ReL4 is an isomer where the PBO group is linked to the pyta ligand by its phenyl group. Theoretical calculations were in congruence with electrochemical and spectroscopic properties in solutions. Both new compounds exhibited strong AIPE and much better solid-state emission efficiency than ReL1, with photoluminescence quantum yields up to 55% for ReL4. Crystallographic data indicate that this increase in emission efficiency is due to optimum packing that prevents quenching. This work shows that minor structural changes may have major effects upon the solid-state spectroscopic properties and it provides a rational basis for accessing AIPE-active strongly emissive rhenium(i) complexes.
RESUMO
Mechanofluorochromic nanoparticles have been prepared from a difluoroboron ß-diketonate complex, and their behavior has been investigated at the nanoscale using atomic force microscopy (AFM) coupled with fluorescence spectroscopy. Two types of nanoparticles were observed, associated with green and yellow emission, reflecting the crystalline polymorphism of this material. While the green-emitting nanoparticles are mechanically insensitive under our conditions, the yellow-emitting ones display a marked hypsochromic shift upon shearing with the AFM tip. At the macroscopic level, the grinding of the bulk material is attributed to the amorphization of the crystalline powder. On the contrary, the marked mechanofluorochromism observed at the nanoscale is attributed to a crystal-to-crystal phase transition. This specific behavior at the nanolevel is extremely promising for applications such as nanoprobes of local mechanical stress.