RESUMO
Over the past two decades, following the discovery of the important biological roles of carbon monoxide (CO), metal carbonyl complexes have been intensively studied as CO-releasing molecules (CORMs) for therapeutic applications. To improve the properties of "bare" low molecular weight CORMs, attention has been drawn to conjugating CORMs with macromolecular and inorganic scaffolds to produce CO-releasing materials (CORMAs) capable of storing and delivering large payloads of the gasotransmitter. A significant obstacle is to obtain CORMAs that retain the beneficial features of the parent CORMs. In the present work, a crystalline metal-organic framework (MOF) formulated as Mo(CO)3(4,4'-bipyridine)3/2 (Mobpy), with a structure based on Mo(CO)3 metallic nodes and bipyridine linkers, has been prepared in near quantitative yield by a straightforward reflux method, and found to exhibit CO-release properties that mimic those typically observed for molybdenum carbonyl CORMs. Mobpy was characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), FT-IR, FT-Raman and diffuse reflectance (DR) UV-vis spectroscopies, and 13C{1H} cross-polarization (CP) magic-angle spinning (MAS) NMR. The release of CO from Mobpy was studied by the deoxy-myoglobin (deoxy-Mb)/carbonmonoxy-myoglobin (MbCO) UV-vis assay. Mobpy liberates CO upon contact with a physiological buffer in the dark, leading to a maximum released amount of 1.3-1.5 mmol g-1, after 1.5 h at 37 °C, with half-lives of 0.5-1.0 h (time to transfer 0.5 equiv. of CO to Mb). In the solid-state and under open air, Mobpy undergoes complete decarbonylation over a period of 42 days, corresponding to a theoretical CO-release of 7.25 mmol g-1.
RESUMO
Inspired by the pharmacological interest generated by 6-substituted purine roscovitine for cancer treatment, 5-aminoimidazole-4-carboxamidine precursors containing a cyanamide unit were prepared by condensation of 5-amino-N-cyanoimidazole-4-carbimidoyl cyanides with a wide range of primary amines. When these amidine precursors were combined with acids, a fast cascade cyclization occurred at room temperature, affording new 6,8-diaminopurines with the N-3 and N-6 substituents changed relatively to the original positions they occupied in the amidine and imidazole moieties of precursors. The efficacy and wide scope of this method was well demonstrated by an easy and affordable synthesis of 22 6,8-diaminopurines decorated with a wide diversity of substituents at the N-3 and N-6 positions of the purine ring. Preliminary in silico and in vitro assessments of these 22 compounds were carried out and the results showed that 13 of these tested compounds not only exhibited IC50 values between 1.4 and 7.5 µM against the colorectal cancer cell line HCT116 but also showed better binding energies than known inhibitors in docking studies with different cancer-related target proteins. In addition, good harmonization observed between in silico and in vitro results strengthens and validates this preliminary evaluation, suggesting that these novel entities are good candidates for further studies as new anticancer agents.
Assuntos
Antineoplásicos , Estrutura Molecular , Relação Estrutura-Atividade , Antineoplásicos/química , Ciclização , Imidazóis/farmacologia , Purinas/farmacologia , Amidinas/farmacologia , Linhagem Celular Tumoral , Simulação de Acoplamento Molecular , Ensaios de Seleção de Medicamentos Antitumorais , Proliferação de CélulasRESUMO
A multistep and diversity-oriented synthetic route aiming at the A3 coupling/domino cyclization of o-ethynyl anilines, aldehydes and s-amines is described. The preparation of the corresponding precursors included a series of transformations, such as haloperoxidation and Sonogashira cross-coupling reactions, amine protection, desilylation and amine reduction. Some products of the multicomponent reaction underwent further detosylation and Suzuki coupling. The resulting library of structurally diverse compounds was evaluated against blood and liver stage malaria parasites, which revealed a promising lead with sub-micromolar activity against intra-erythrocytic forms of Plasmodium falciparum. The results from this hit-to-lead optimization are hereby reported for the first time.
Assuntos
Antimaláricos , Antimaláricos/farmacologia , Indóis , Aldeídos , Aminas , Compostos de Anilina , Ciclização , CatáliseRESUMO
Metal-organic frameworks (MOFs) are versatile compounds with emergent applications in the fabrication of biosensors for amyloid diseases. They hold great potential in biospecimen protection and unprecedented probing capabilities for optical and redox receptors. In this Review, we summarize the main methodologies employed in the fabrication of MOF-based sensors for amyloid diseases and collect all available data in the literature related to their performance (detection range, limit of detection, recovery, time of analysis, among other parameters). Nowadays, MOF sensors have evolved to a point where they can, in some cases, outperform technologies employed in the detection of several amyloid biomarkers (amyloid ß peptide, α-synuclein, insulin, procalcitonin, and prolactin) present in biological fluids, such as cerebrospinal fluid and blood. A special emphasis has been given by researchers on Alzheimer's disease monitoring to the detriment of other amyloidosis that are underexploited despite their societal relevance (e.g., Parkinson's disease). There are still important obstacles to overcome in order to selectively detect the various peptide isoforms and soluble amyloid species associated with Alzheimer's disease. Furthermore, MOF contrast agents for imaging peptide soluble oligomers in living humans are also scarce (if not nonexistent), and action in this direction is unquestionably required to clarify the contentious link between the amyloidogenic species and the disease, guiding research toward the most promising therapeutic strategies.
Assuntos
Doença de Alzheimer , Amiloidose , Estruturas Metalorgânicas , Doença de Parkinson , Humanos , Doença de Alzheimer/diagnóstico , Peptídeos beta-Amiloides/líquido cefalorraquidiano , Estruturas Metalorgânicas/química , Doença de Parkinson/diagnóstico , Amiloidose/diagnósticoRESUMO
The development of convenient, non-complicated, and cost-efficient processing techniques for packing low-density MOF powders for industry implementation is essential nowadays. To increase MOFs' availability in industrial settings, we propose the synthesis of a novel 3D Tb-MOF (1) and a simple and non-expensive method for its immobilization in the form of pellets and membranes in polymethacrylate (PMMA) and polysulphone (PSF). The photoluminescent properties of the processed materials were investigated. To simulate industrial conditions, stability towards temperature and humidity have been explored in the pelletized material. Water-adsorption studies have been carried out in bulk and processed materials, and because of the considerable capacity to adsorb water, proton-conduction studies have been investigated for 1.
RESUMO
Due to the fast, emerging development of antibiotic-resistant bacteria, the need for novel, efficient routes to battle these pathogens is crucial; in this scenario, metal-organic frameworks (MOFs) are promising materials for combating them effectively. Herein, a novel Cu-MOF-namely 1-that displays the formula [Cu3L2(DMF)2]n (DMF = N,N-dimethylformamide) is described, synthesized by the combination of copper(II) and 3,4-dihydroxybenzoic acid (H3L)-both having well-known antibacterial properties. The resulting three-dimensional structure motivated us to study the antibacterial activity, adsorptive capacity and processability of the MOF in the form of pellets and membranes as a proof-of-concept to evaluate its future application in devices.
Assuntos
Antibacterianos , Cobre , Cobre/química , Ligantes , Adsorção , Antibacterianos/farmacologiaRESUMO
Herein, we describe and study a new family of isostructural multifunctional metal-organic frameworks (MOFs) with the formula {[Ln5L6(OH)3(DMF)3]·5H2O}n (where (H2L) is 3-amino-4-hydroxybenzoic acid ligand) for magnetism and photoluminescence. Interestingly, three of the materials (Dy-, Er-, and Yb-based MOFs) present single-molecule magnet (SMM) behavior derived from the magnetic anisotropy of the lanthanide ions as a consequence of the adequate electronic distribution of the coordination environment. Additionally, photoluminescence properties of the ligand in combination with Eu and Tb counterparts were studied, including the heterometallic Eu-Tb mixed MOF that shows potential as ratiometric luminescent thermometers. Finally, the porous nature of the framework allowed showing the CO2 sorption capacity.
RESUMO
The importance of choline chloride (ChCl) is recognized due to its widespread use in the formulation of deep eutectic solvents. The controlled addition of water in deep eutectic solvents has been proposed to overcome some of the major drawbacks of these solvents, namely their high hygroscopicities and viscosities. Recently, aqueous solutions of ChCl at specific mole ratios have been presented as a novel, low viscous deep eutectic solvent. Nevertheless, these proposals are suggested without any information about the solid-liquid phase diagram of this system or the deviations from the thermodynamic ideality of its precursors. This work contributes significantly to this matter as the phase behavior of pure ChCl and (ChCl + H2O) binary mixtures was investigated by calorimetric and analytical techniques. The thermal behavior and stability of ChCl were studied by polarized light optical microscopy and differential scanning calorimetry, confirming the existence of a solid-solid transition at 352.2 ± 0.6 K. Additionally, heat capacity measurements of pure ChCl (covering both ChCl solid phases) and aqueous solutions of ChCl (xChCl < 0.4) were performed using a heat-flow differential scanning microcalorimeter or a high-precision heat capacity drop calorimeter, allowing the estimation of a heat capacity change of (ChCl) ≈ 39.3 ± 10 J K-1 mol-1, between the hypothetical liquid and the observed crystalline phase at 298.15 K. The solid-liquid phase diagram of the ChCl + water mixture was investigated in the whole concentration range by differential scanning calorimetry and the analytical shake-flask method. The phase diagram obtained for the mixture shows an eutectic temperature of 204 K, at a mole fraction of choline chloride close to xChCl = 0.2, and a shift of the solid-solid transition of ChCl-water mixtures of 10 K below the value observed for pure choline chloride, suggesting the appearance of a new crystalline structure of ChCl in the presence of water, as confirmed by X-ray diffraction. The liquid phase presents significant negative deviations to ideality for water while COSMO-RS predicts a near ideal behaviour for ChCl.
RESUMO
One novel three-dimensional (3-D) copper(I)-thioarsenate(III) [Ni(en)3]Cu4As4S9 (1, en = ethylenediamine) has been solvothermally prepared with the utilization of the in situ formation of [Ni(en)3]2+ complex as structure-directing agent (SDA). 1 contains cubane-like [Cu8S12]16- clusters and rare tetrameric [As4S9]6- units, which are interconnected to generate the first example of a 3-D anionic framework [Cu4As4S9]n2n-, topologically identical to pyrite, and having large channels filled by [Ni(en)3]2+ complex cations. 1 is a potential wide-band-gap semiconductor with an energy gap of 1.91 eV that exhibits selectively photocatalytic degradation of methylene blue under visible-light irradiation. The density functional theory calculation, photocurrent response, and magnetic properties of 1 were also investigated.
RESUMO
Bisphosphonates, used for a long time in osteoporosis management, are currently the target of intensive research, from pre-formulation studies to more advanced stages of clinical practice. This review presents an overview of the contributions of this family of compounds to human health, starting with the chemistry and clinical uses of bisphosphonates. Following this, their pharmacology is described, highlighting administration-borne handicaps and undesirable effects. The last three sections of the review describe the research efforts that seek to curb delivery-related issues and expand bisphosphonate use. Innovative routes and strategies of administration, such as nano-encapsulation for oral intake or injectable cements for local or in-bone delivery are presented, as well as the latest results of case studies or preclinical studies proposing new therapeutic indications for the clinically approved bisphosphonates. Finally, a selection of anti-infectious bisphosphonate new drug candidates is shown, with focus on the molecules reported in the last two decades.
Assuntos
Conservadores da Densidade Óssea/farmacologia , Doenças Ósseas/tratamento farmacológico , Difosfonatos/farmacologia , Animais , Conservadores da Densidade Óssea/administração & dosagem , Conservadores da Densidade Óssea/química , Conservadores da Densidade Óssea/uso terapêutico , Osso e Ossos/efeitos dos fármacos , Osso e Ossos/metabolismo , Difosfonatos/administração & dosagem , Difosfonatos/química , Difosfonatos/uso terapêutico , Composição de Medicamentos , Sistemas de Liberação de Medicamentos , HumanosRESUMO
Crystalline polyoxovanadates (POVs) are a subclass of polyoxometalates with significance in chemical, physical and materials sciences. Recent studies revealed that the condensation of vanadate and borate fragments may yield a whole new class of POVs. These novel vanadoborates are typically prepared by high-temperature solid-state, boric acid flux or low-temperature hydrothermal techniques. The different connections of [VOx] (x = 4, 5, 6) and [BOx] (x = 3, 4) polyhedral units ultimately result in a fascinating variety of vanadoborate anionic clusters, which can be at the genesis of a myriad of one-dimensional (1-D), two-dimensional (2-D) and three-dimensional (3-D) polymeric architectures by way of either self-condensation or by forming covalent bonds with other metal ions or unsaturated metal complexes. This review summarizes, in a systematic structural approach, the most striking advances in the syntheses, structural features, and some properties of crystalline vanadoborates based on different [VxBy] and [VxByPz] clusters. It intends to provide meaningful and helpful guidance for the future preparation of new and functional vanadoborates.
RESUMO
Melanoma is the most dangerous form of skin cancer, with an abrupt growth of its incidence over the last years. It is extremely resistant to traditional treatments such as chemotherapy and radiotherapy, but therapies for this cancer are gaining attention. Photodynamic therapy (PDT) is considered an effective modality to treat several types of skin cancers and can offer the possibility to treat one of the most aggressive ones: melanoma. In this work, the effect of PDT on a melanotic cell line (B16F10 cells) was assessed by exposing cultured cells to 5,10,15-tris(pentafluorophenyl)-20-(4-pyridyl)porphyrin (PS1) and to its chlorin (PS2) and isobacteriochlorin (PS3) corresponding derivatives and red LED light (λ = 660 ± 20 nm). The PDT effect in the cells' viability was measured using the MTT assay. The cell apoptosis was quantified by flow cytometry, and the subcellular localization of the photosensitizer was determined by fluorescence microscopy. In addition, the ability of PS2 to generate superoxide radicals was qualitatively assessed by tyrosine nitration. The results show that the efficiency of the PDT process is dependent on the structure of the PS and on their ability to produce singlet oxygen. Besides that, the photoactivation efficiency is highly dependent on the cellular sublocalization of the PS and on its cellular uptake and singlet oxygen production. We also found that the resistant cell line B16F10 has distinctive chlorin, isobacteriochlorin, or porphyrin-specific resistance profiles. Furthermore, it is shown that the highly fluorescent chlorin derivative PS2 can also be considered in imaging diagnostics.
Assuntos
Melanoma/tratamento farmacológico , Fotoquimioterapia , Fármacos Fotossensibilizantes/administração & dosagem , Porfirinas/administração & dosagem , Neoplasias Cutâneas/tratamento farmacológico , Animais , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Camundongos , Fármacos Fotossensibilizantes/química , Fármacos Fotossensibilizantes/efeitos da radiação , Porfirinas/química , Porfirinas/efeitos da radiação , Oxigênio Singlete/metabolismoRESUMO
Osteoporosis, Paget's disease and osteosarcoma are a few examples of bone tissue disorders that affect millions of people worldwide. These conditions can strictly limit the lifestyle of patients and may even lead to their demise. To prevent this or, at least, try to manage the situation, there are several treatments available on the market. Notwithstanding, research has been driven by the possibility to improve the existing therapies, as well as to find new approaches that could better respond to these diseases. In this Review the path is shown through which, in recent years, coordination compounds have been prepared and manufactured to be applied in the management of bone tissue disorders. Starting with the design and preparation of the coordination compounds with various dimensionalities, two approaches have been used: (1)â they are prepared as three-dimensional cages that can act as delivery systems for therapeutic substances, or (2)â they are constructed/prepared from compounds with intrinsic therapeutic properties. Following this, several strategies have been explored to manufacture the effective delivery to the patients. The versatility of coordination compounds has allowed their use in the preparation of drug tablets, coatings for titanium implants, or even scaffolds for bone tissue engineering. In the end, it becomes clear that these compounds can be a valuable approach to reach a better treatment for bone tissue disorders. Nonetheless, along the road, a few bumps have appeared concerning the therapeutic profile, such as the effect of the structural arrangement or particle size.
Assuntos
Doenças Ósseas , Complexos de Coordenação , Titânio , Doenças Ósseas/terapia , Complexos de Coordenação/uso terapêutico , Humanos , Próteses e Implantes , Engenharia Tecidual , CicatrizaçãoRESUMO
The present review focuses on the use of Metal-Organic Frameworks, (MOFs) highlighting the most recent developments in the biological field. This review assesses, in the first instance, the cytotoxicity of MOFs (particularly those used for various biological applications described throughout this review), and shows that for standard MOFs based on metals already present in active molecules of the human body, toxicity is not a significant limitation. Here we underline the MIL-, UiO- and ZIF-series of MOFs which remain until now the most used materials in drug delivery of active pharmaceutical ingredients (APIs), such as antitumourals or retroviral drugs (with high loading and slow release time). Porosity remains undoubtedly the most studied key property of MOFs, that allows the protection of active biomolecules such as enzymes or the development of antimicrobial materials. Emphasis is given on the usage of MOFs for the detection of biomarkers in biological fluids such as urine and blood (detection of cystinuria, identification of penicillin anaphylaxis, urea, bilirubin, biomarkers related to human intoxication, tumoural indicators, among several others), for which a number of simple devices (such as paper strips) were developed. Despite the remarkable and promising results presented in recent years, the literature remains scarce (mostly non-existent) in terms of direct comparison of these novel technologies with the solutions presently available in the market. Action on this side may make the difference in the next years concerning research on MOFs, to see if some of these materials may reach the end-user as new and more efficient treatments or detection approaches.
Assuntos
Antirretrovirais/química , Antineoplásicos/química , Corantes/química , Portadores de Fármacos/química , Estruturas Metalorgânicas/química , Animais , Antirretrovirais/farmacologia , Antineoplásicos/farmacologia , Biomarcadores/sangue , Biomarcadores/urina , Liberação Controlada de Fármacos , Humanos , Conformação Molecular , Imagem Molecular , Fotoquimioterapia , PorosidadeRESUMO
[Gd(H4nmp)(H2O)2]Cl·2H2O (1) converts into [Gd2(H3nmp)2]·xH2O (2) (x = 1 to 4) with a notable increase in proton conductivity. 1 is a charged layered material counter balanced by chloride ions, with proton conductivity values of 1.23 × 10-5 S cm-1 at 98% relative humidity (RH) and 40 °C. At 98% RH and 94 °C the observed conductivity is 0.51 S cm-1, being to date one of the highest values ever reported for a proton-conducting coordination polymer. This increase is observed during a structural transformation into 2 that occurs at high temperature and RH. While this remarkable conductivity is observed only after transformation and by maintaining high humidity conditions, as-synthesized 2 also shows a conductivity value of 3.79 × 10-2 S cm-1 at 94 °C and 98% RH, still ranked as one of the highest reported values. Moreover, it is shown that the key factor for high proton conduction is the unusual dynamic structural transformation with water insertion and release of chloride ions.
RESUMO
Bisphosphonates (BPs), well-known medicinal compounds used for osteoporosis management, are currently the target of intensive research, from basic pre-formulation studies to more advanced stages of clinical practice. The high demand by the pharmaceutical industry inherently requires an easy, efficient and quick preparation of BPs. Current synthetic procedures are, however, still far from ideal. This work presents a comprehensive compilation of reports on the synthesis of the commercially available bisphosphonates that are pharmaceutical active ingredients. Current limitations to the conventional synthesis are assessed, and paths towards their improvement are described, either through the use of alternative solvents and/or by selecting appropriate ratios of the reactants. Innovative processes, such as microwave-assisted synthesis, are presented as more environmental-friendly and effective methods. The main advantages and setbacks of all syntheses are provided as a way to clarify and promote the development of simpler and improved procedures. Only in this way one will be able to efficiently respond to the future high demand of BPs, mostly due to the increase in life span in occidental countries.
Assuntos
Difosfonatos , Osteoporose/tratamento farmacológico , Difosfonatos/síntese química , Difosfonatos/química , Difosfonatos/uso terapêutico , Humanos , Micro-Ondas , SolventesRESUMO
A new indium telluride, [Mn4.78In2.22(ea)12]n[In9.79Mn0.21Te17]n (where Hea = ethanolamine), containing unprecedented nonsupertetrahedral [In9.79Mn0.21Te21] units is the first example of a two-dimensional indium telluride framework templated by a rare high-nuclearity wheel-shaped heterometallic [Mn4.78In2.22(ea)12]4.22+ cluster. The photocurrent response and magnetic properties were investigated.
RESUMO
In this work, we used the rigid tetrapodal organic linker, [1,1'-biphenyl]-3,3',5,5'-tetrayltetrakis(phosphonic acid) (H8btp), for the preparation of two lanthanide-organic framework families of compounds: layered [Ln7(H5btp)4(H5.5btp)2(H6btp)2(H2O)12]â23.5H2OâMeOH [where Ln3+ = Eu3+ (1Eu) and Gd3+ (1Gd)], prepared using microwave-irradiation followed by slow evaporation; 3D [Ln4(H3btp)(H4btp)(H5btp)(H2O)8]â3H2O [where Ln3+ = Ce3+ (2Ce), Pr3+ (2Pr), and Nd3+ (2Nd)], obtained from conventional hydro(solvo)thermal synthesis. It is shown that in this system, by carefully selecting the synthetic method and the metal centers, one can increase the dimensionality of the materials, also increasing structural robustness (particularly to the release of the various solvent molecules). Compound 1 is composed of 2D layers stacked on top of each other and maintained by weak π-π interactions, with each layer formed by discrete 1D organic cylinders stacked in a typical brick-wall-like fashion, with water molecules occupying the free space in-between cylinders. Compound 2, on the other hand, is a 3D structure with small channels filled with crystallization water molecules. A full solid-state characterization of 1 and 2 is presented (FT-IR spectroscopy, SEM microscopy, thermogravimetric studies, powder X-ray diffraction and thermodiffractometry). The photoluminescence of 1Eu was investigated.
Assuntos
Complexos de Coordenação/síntese química , Organofosfonatos/síntese química , Complexos de Coordenação/química , Conformação Molecular , Estrutura Molecular , Organofosfonatos/química , Difração de Pó , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
This work reports the synthesis and multifunctionality of 2D layered coordination polymers formulated as [Ln2(H3nmp)2]·xH2O (1, where Ln = Sm3+, Eu3+, Tb3+, Dy3+, Ho3+, Er3+ and Y3+) (x = 1 to 4). We describe detailed synthesis of the materials using various methods [typical hydrothermal reaction (HT), microwave-assisted synthesis (MWAS) and one-pot method (OP)], while discussing the various crystal morphologies which can be fine tuned by varying systematically the conditions. We further explore the multifunctionality of this material by studying its heterogeneous catalytic activity in the ring opening of styrene oxide, its photoluminescence behaviour and its cytotoxicity. A conversion of 88%/100% yield at 4 h/24 h reaction respectively, with excellent selectivity towards 2-methoxy-2-phenylethanol product (100%) was observed. Photoluminescence properties of the optically-active [Eu2(H3nmp)2]·xH2O (1Eu) and the mixed-lanthanide [(Gd0.95Eu0.5)2(H3nmp)2]·xH2O (1GdEu), on the other hand, show potential use for UV-to-visible light converters, with lifetimes of 2.31 ± 0.01 and 2.61 ± 0.01 ms at ambient temperature for 1Eu and 1GdEu samples. Preliminary cytotoxic studies showed no effects on metabolic activity of both in vitro human epithelial kidney (HK-2) and human hepatocellular carcinoma (HepG2) cell lines. A reduction of NR uptake was, however, observed indicating some cytotoxic effect on lysosomal activity.