Harnessing solar power for enhanced photocatalytic degradation of coloured pollutants using novel Mg-doped-ZnFe2O4/S@g-C3N4 heterojunction: A facile hydrothermal synthesis approach.

The ability of heterogeneous photocatalysis to effectively remove organic pollutants from wastewater has shown great promise as a tool for environmental remediation. Pure zinc ferrites (ZnFe2O4) and magnesium-doped zinc ferrites (Mg@ZnFe2O4) with variable percentages of Mg (0.5, 1, 3, 5, 7, and 9 mol%) were synthesized via hydrothermal route and their photocatalytic activity was checked against methylene blue (MB) taken as a model dye. FTIR, XPS, BET, PL, XRD, TEM, and UV-Vis spectroscopy were used for the identification and morphological characterization of the prepared nanoparticles (NPs) and nanocomposites (NCs). The 7% Mg@ZnFe2O4 NPs demonstrated excellent degradation against MB under sunlight. The 7% Mg@ZnFe2O4 NPs were integrated with diverse contents (10, 50, 30, and 70 wt.%) of S@g-C3N4 to develop NCs with better activity. When the NCs were tested to degrade MB dye, it was revealed that the 7%Mg@ZnFe2O4/S@g-C3N4 NCs were more effective at utilizing solar energy than the other NPs and NCs. The synergistic effect of the interface formed between Mg@ZnFe2O4 and S@g-C3N4 was primarily responsible for the boosted photocatalytic capability of the NCs. The fabricated NCs may function as an effective new photocatalyst to remove organic dyes from wastewater.

Novel yellowish-green single-phased spinel Mg1-xBaxAl2O4:Mn2+ phosphor(s) for color rendering white-light-emitting diodes.

For white light-rendering research activities, interpretation by using colored emitting materials is an alternative approach. But there are issues in designing the white color emitting materials. Particularly, differences in thermal and decay properties of discrete red, green, and blue emitting materials led to the quest for the search of a single-phased material, able to emit primary colors for white light generation. The current study is an effort to design a simple, single-phase, and cost-effective material with the tunable emission of primary colors by a series of Mg1-xBaxAl2O4:Mn2+ nanopowders. Doping of manganese ion (Mn2+) in the presence of the larger barium cation (Ba2+) at tetrahedral-sites of the spinel magnesium aluminate (MgAl2O4) structure led to the creation of antisite defects. Doped samples were found to have lower bandgaps compared with MgAl2O4, and hybridization of 3d-orbitals of Mn2+ with O(2p), Mg(2s)/Al(2s3p) was found to be responsible for narrowing the bandgap. The distribution of cations at various sites at random results in a variety of electronic transitions between the valance band and oxygen vacancies as well as electron traps produced the antisite defects. The suggested compositions might be used in white light applications since they have three emission bands with centers at 516 nm (green), 464 nm (blue) and 622 nm (red) at an excitation wavelength of 380 nm. A detailed discussion to analyze the effects of the larger cationic radius of Ba2+ on the lattice strain, unit cell parameters, and cell volumes using X-ray diffraction analysis is presented.

Ultrasound-assisted synthesis of MSNs/PS nanocomposite membranes for effective removal of Cd2+ and Pb2+ ions from aqueous solutions.

Contamination of heavy metal (Cd2+ & Pb2+) ions in drinking water is producing major impacts on the environment and public health and is considered one of the greatest dangers to humanity. Membrane technology has been chosen over other processing methods due to its simplicity and high capacity for more effective removal of hazardous heavy metals. In the current study, amine, thiol, and bi-thiol functional groups were used to functionalize mesoporous silica nanoparticles (MSNs) to improve the efficiency of the silica nanoparticle. The morphology of the MSNs as well as the existence of amine and thiol on the surface of MSNs was demonstrated by a variety of characterization techniques, including FTIR, TEM, and SEM examination. The impact of surface-modified MSNs on the morphology, properties, and performance of polysulfone (PS) nanofiltration (NF) membranes was also evaluated. The membrane that incorporated amine with thiol-based MSNs (DiMP-MSNs/PS-NF membrane) had the highest pure water permeability (6.7 LMH bar-1). As a result of the functional groups, the surface-modified MSNs/PS nanofiltration are extremely effective at removing heavy metal ions from aqueous solutions. The surface-modified MSNs/PS nano-filtration membranes exhibit unprecedented Cd2+ and Pb2+ removal rates of approximately 82% and 99%, respectively. This research indicates the possible application of the surface-modified MSNs/PS nanofiltration membrane as a promising platform to remove heavy metal ions from polluted water.

Montmorillonite-based polymethacrylate composite monoliths as stationary phase materials for food and pharmaceutical analysis in capillary liquid and gas chromatography.

This work relates to the preparation of novel and promising stationary phases containing inorganic-organic composites for capillary liquid and gas chromatography. A naturally occurring montmorillonite was introduced to polymethacrylate monoliths, then used under different conditions of GC and HPLC at the same time. The performance of the columns was evaluated for the separation of alkane and alkylbenzene series in GC and capillary HPLC, respectively. While the bare monoliths failed to separate the model analytes, montmorillonite-based polymethacrylate allowed a full separation of the mixtures with Rs≥1.42. The columns were applied for the determination of myrcene and limonene isomers in the peel extracts of some fruits using GC, and for the analysis of active ingredients including aspirin, vitamin-C, caffeine, and ibuprofen extracted from common drugs using capillary HPLC. In GC, fast separation was achieved in 1.0 min with Rs of 6.53. The columns exhibited the best efficiency for myrcene with 20,900 plates/m. Using the capillary HPLC columns, the active ingredients were resolved in 10 min with Rs≥5.72. The efficiency values located between 12,800-21,700 plates/m in all cases. The developed methods were found to be linear in the range of 0.10-10.0 and 0.20-180 µg/mL for GC and HPLC, respectively. In comparison with commercial columns, the results in GC methods reveal that, despite their much shorter length, the prepared columns proved a faster separation with higher efficiency and comparable detection limits and chromatographic resolution. The prepared HPLC capillaries exposed lower run times and detection limits with comparable efficiency and resolution, and consume fewer samples and mobile phase solvents. The results demonstrate that the montmorillonite-based polymethacrylate composites are applicable as stationary phases for routine analysis and quality control of important fields such as food and pharmaceutical samples.

A New Zn(II) Metal Hybrid Material of 5-Nitrobenzimidazolium Organic Cation (C7H6N3O2)2[ZnCl4]: Elaboration, Structure, Hirshfeld Surface, Spectroscopic, Molecular Docking Analysis, Electric and Dielectric Properties.

The slow solvent evaporation approach was used to create a single crystal of (C7H6N3O2)2[ZnCl4] at room temperature. Our compound has been investigated by single-crystal XRD which declares that the complex crystallizes in the monoclinic crystallographic system with the P21/c as a space group. The molecular arrangement of the compound can be described by slightly distorted tetrahedral ZnCl42- anionic entities and 5-nitrobenzimidazolium as cations, linked together by different non-covalent interaction types (H-bonds, Cl…Cl, π…π and C-H…π). Hirshfeld's surface study allows us to identify that the dominant contacts in the crystal building are H…Cl/Cl…H contacts (37.3%). FT-IR method was used to identify the different groups in (C7H6N3O2)2[ZnCl4]. Furthermore, impedance spectroscopy analysis in 393 ≤ T ≤ 438 K shows that the temperature dependence of DC conductivity follows Arrhenius' law. The frequency-temperature dependence of AC conductivity for the studied sample shows one region (Ea = 2.75 eV). In order to determine modes of interactions of compound with double stranded DNA, molecular docking simulations were performed at molecular level.

The Coordination Behavior of Two New Complexes, [(C7H10NO2)CdCl3]n(I) and [(C7H9NO2)CuCl2] (II), Based on 2,6-Dimethanolpyridine; Elaboration of the Structure and Hirshfeld Surface, Optical, Spectroscopic and Thermal Analysis.

Two novel complexes, [(C7H10NO2)CdCl3]n(I) and [(C7H9NO2)CuCl2],havebeen synthesized and characterized. Single crystal X-ray diffraction revealed that in compound (I), 2,6-dimethanol pyridinium acts as a monodentate ligand through the O atom of the hydroxyl group. Contrarily, the 2,6-dimethanol pyridine ligand interacts tridentately with the Cu(II) ion via the nitrogen atoms and the two oxygen (O, O') atoms of the two hydroxyl groups. The structure's intermolecular interactions were studied using contact enrichment ratios and Hirshfeld surfaces. Following metal coordination, numerous hydrogen connections between entities and parallel displacement stacking interactions between pyridine rings dictate the crystal packing of both compounds. The aromatic cycles generate layers in the crystal for both substances. Powder XRD measurements confirmed the crystalline sample phase purity. SEM confirmed the surface homogeneity, whereas EDX semi-quantitative analysis corroborated the composition. IR spectroscopy identified vibrational absorption bands, while optical UV-visible absorption spectroscopy investigated optical properties. The thermal stability of the two materials was tested using TG-DTA.

Fabrication of Polysulfone-Surface Functionalized Mesoporous Silica Nanocomposite Membranes for Removal of Heavy Metal Ions from Wastewater.

Membranes are an efficient way to treat emulsified heavy metal-based wastewater, but they generally come with a trade-off between permeability and selectivity. In this research, the amine and sulphonic groups on the inner and outer surface of mesoporous silica nanoparticles (MSNs) were first modified by a chemical approach. Then, MSNs with amine and sulphonic groups were utilized as new inorganic nanofiller to fabricate mixed matrix polysulfone (PSU) nanocomposite membranes using the classical phase inversion approach. The resultant nanoparticles and membranes were characterized by their physico-chemical characteristics as well as determination of pure water permeability along with cadmium and zinc ion removal. Embedding nanoparticles resulted in a significant rise in the water permeability as a result of changes in the surface properties and porosity of the membrane. Furthermore, the efficiency of developed membranes to remove cadmium and zinc was significantly improved by more than 90% due to the presence of functional groups on nanoparticles. The functionalized-MSNs/PSU nanocomposite membrane has the potential to be an effective industrial effluent removal membrane.

Poly(oligo(ethylene glycol) methyl ether methacrylate) Capped pH-Responsive Poly(2-(diethylamino)ethyl methacrylate) Brushes Grafted on Mesoporous Silica Nanoparticles as Nanocarrier.

In this paper, a new pH-responsive nanosystem based on mesoporous silica nanoparticles (MSNs) was developed for cancer therapy. Poly(2-(diethylamino) ethyl methacrylate) (PDEAEMA) was grafted on their outer surface and acts as a gatekeeper, followed by subsequent modification of the polymer by cysteine (MSN-PDEAEMA-Cys) and poly(oligo(ethylene glycol) methyl ether methacrylate) (MSN-PDEAEMA-Cys-POEGMEMA). The physicochemical properties of these nanocarriers were characterized using scanning and transmission electron microscopies (SEM and TEM), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and dynamic light scattering (DLS). The synthesized nanoparticles were well-dispersed with a diameter of ca. 200 nm. The obtained XPS results confirm the successful modification of MSN-PDEAEMA with Cys and POEGMEMA by increasing the peak intensity of C-O and C=O groups at 286.5 and 288.5 eV, respectively. An anti-cancer drug, doxorubicin (DOX), was encapsulated into the fabricated nanoplatform. The DOX release amount at physiological pH of 7.4 was limited (10%), while an accumulation drug release of ca. 35% was accomplished after 30 h in acidic media. The MTT cell line was used to assess the cytotoxicity of the unloaded and DOX-loaded fabricated nanoplatforms. Upon loading of DOX on these nanomaterials, they showed significant toxicity to human liver cancer cells. These results suggest that the prepared nano-structured materials showed good biocompatibility as well, and they can serve as nanocarriers for the delivery of anti-cancer drugs.

Folic Acid-Terminated Poly(2-Diethyl Amino Ethyl Methacrylate) Brush-Gated Magnetic Mesoporous Nanoparticles as a Smart Drug Delivery System.

Currently, chemotherapy is an important method for the treatment of various cancers. Nevertheless, it has many limitations, such as poor tumour selectivity and multi-drug resistance. It is necessary to improve this treatment method by incorporating a targeted drug delivery system aimed to reduce side effects and drug resistance. The present work aims to develop pH-sensitive nanocarriers containing magnetic mesoporous silica nanoparticles (MMSNs) coated with pH-responsive polymers for tumour-targeted drug delivery via the folate receptor. 2-Diethyl amino ethyl methacrylate (DEAEMA) was successfully grafted on MMSNs via surface initiated ARGET atom transfer radical polymerization (ATRP), with an average particle size of 180 nm. The end groups of poly (2-(diethylamino)ethyl methacrylate) (PDEAEMA) brushes were converted to amines, followed by a covalent bond with folic acid (FA) as a targeting agent. FA conjugated to the nanoparticle surface was confirmed by X-ray photoelectron spectroscopy (XPS). pH-Responsive behavior of PDEAEMA brushes was investigated by Dynamic Light Scattering (DLS). The nanoparticles average diameters ranged from ca. 350 nm in basic media to ca. 650 in acidic solution. Multifunctional pH-sensitive magnetic mesoporous nanoparticles were loaded with an anti-cancer drug (Doxorubicin) to investigate their capacity and long-circulation time. In a cumulative release pattern, doxorubicin (DOX) release from nano-systems was ca. 20% when the particle exposed to acidic media, compared to ca. 5% in basic media. The nano-systems have excellent biocompatibility and are minimally toxic when exposed to MCF-7, and -MCF-7 ADR cells.

Hybrid Mesoporous Silica Nanoparticles Grafted with 2-(tert-butylamino)ethyl Methacrylate-b-poly(ethylene Glycol) Methyl Ether Methacrylate Diblock Brushes as Drug Nanocarrier.

This paper introduces the synthesis of well-defined 2-(tert-butylamino)ethyl methacrylate-b-poly(ethylene glycol) methyl ether methacrylate diblock copolymer, which has been grafted onto mesoporous silica nanoparticles (PTBAEMA-b-PEGMEMA-MSNs) via atom transfer radical polymerization (ATRP). The ATRP initiators were first attached to the MSN surfaces, followed by the ATRP of 2-(tert-butylamino)ethyl methacrylate (PTBAEMA). CuBr2/bipy and ascorbic acid were employed as the catalyst and reducing agent, respectively, to grow a second polymer, poly(ethylene glycol) methyl ether methacrylate (PEGMEMA). The surface structures of these fabricated nanomaterials were then analyzed using Fourier Transform Infrared (FTIR) spectroscopy. The results of Thermogravimetric Analysis (TGA) show that ATRP could provide a high surface grafting density for polymers. Dynamic Light Scattering (DLS) was conducted to investigate the pH-responsive behavior of the diblock copolymer chains on the nanoparticle surface. In addition, multifunctional pH-sensitive PTBAEMA-b-PEGMEMA-MSNs were loaded with doxycycline (Doxy) to study their capacities and long-circulation time.

Retrograde nephrostomy access for percutaneous nephrolithotomy: a simple and safe technique.

This study aimed at illustrating our experience with the retrograde nephrostomy access technique for percutaneous nephrolithotomy (PCNL).This retrospective study was conducted between June 1997 and September 2018 for 648 patients who underwent PCNL with retrograde nephrostomy access. Included in the study were the patient demographic, operative time, site of the access, fluoroscopic exposure time, stone clearance rate, additional procedures and complications. A total of 648 patients aged between 25 and 70 years had renal stones and were included in this study. Retrograde nephrostomy access was achieved through the upper calyx in 252 patients (38.9%), middle calyx in 348 patients (53.7%) and lower calyx in 48 patients (7.4%). Among those patients, 108 (16.7%) required supracostal access. The average time for the retrograde access and PCNL was 14.4 min and 40 min, respectively. The average fluoroscopic exposure time for the retrograde access was 3.2 min. There were 12 failures (1.9%) as a result of severe hydronephrosis. Complete stone clearance was achieved in 91.8%. Small stone fragments (4 mm or less) were detected in 7.4%. Median hospital stay was 3.5 days (range 3-7). Complications occurred in 39 patients (6%). Eight patients (1.2%) developed significant postoperative hemorrhage that was controlled by transfusion and angioembolization. There were no recorded cases of colonic injuries, pneumothorax or hemothorax, demonstrating that the retrograde access technique is safe and reliable. It provides control over both ends of the wire eliminating the risk of accidental wire displacement. Radiation exposure is minimal. There are low failure and complication rates.

Incidence of prostate cancer among patients with prostate-related urinary symptoms: A single institution series in 10 years.

PURPOSE: The aim of the study is to correlate between the value of digital rectal examination (DRE), serum prostate-specific antigen (PSA), and transrectal ultrasound (TRUS) as predictors for diagnosing prostate cancer in patients with voiding symptoms. MATERIALS AND METHODS: A total of 1610 male patients seen over a period of 10 years in a single institution had prostate-related voiding problems. Routine studies including DRE and serum PSA were done to all patients. TRUS and TRUS biopsy were performed for patients with suspected prostatic cancer based on abnormal DRE findings and/or serum PSA levels. RESULTS: TRUS biopsy revealed prostate cancer in 206 out of 1610 patients with prostate-related voiding problems (13%), 40% had abnormal PSA and 28% had abnormal DRE. Combined abnormal PSA and DRE revealed cancer in 63% of patients. This percentage increased to 90% when TRUS was also abnormal, but dropped to 54% when TRUS was normal. CONCLUSIONS: DRE together with serum PSA and TRUS have the highest predictable values for diagnosis of prostate cancer among patients with voiding symptoms. In the absence of abnormal TRUS, PSA and DRE together are more predictable than either alone. Serum PSA alone is more predictable than DRE. Random prostate biopsies should be performed in the presence of high serum PSA, and/or abnormal findings by DRE in male patients with urinary symptoms suggestive of the prostate disease.

Percutaneous retropelvic endopyelotomy for treatment of ureteropelvic junction obstruction.

PURPOSE: A new minimally invasive approach for endopyelotomy for the treatment of ureteropelvic junction obstruction (UPJO) is described. The results are compared with those of other lines of treatment. MATERIALS AND METHODS: A total of 39 patients with UPJO underwent percutaneous retropelvic endopyelotomy. Retrograde percutaneous renal access, using the Lawson catheter and deflecting guidewire, was done for creation of the nephrostomy tract. Using holmium laser through a 28-Fr nephroscope, a small window was made in the posterolateral surface of the renal pelvis. The nephroscope was advanced from the renal pelvis to the retropelvic space through that window. Crossing vessels were easily detected and were either coagulated or avoided. The window incision was extended distally, and the narrow ureteropelvic junction (UPJ) was incised using holmium laser. RESULTS: The entire procedure was done in the supine position within 1 h. The presence of secondary stones, hugely dilated renal pelvis, high insertion of the UPJ, and whether UPJO was primary or secondary, did not alter the results. The only factor that affected the results was split function of the obstructed renal unit. The success rate was 100% when the split function exceeded 35%. When the split function was <35%, the success rate dropped to 56%. CONCLUSION: Percutaneous retropelvic endopyelotomy is a promising approach for the treatment of UPJO that gave favorable results. The use of the nephroscope provided a wide visual field. The wide-field facilitated detection of crossing blood vessels with no incident of vascular injury. It also facilitated endopyelotomy with high precision. Ureteral injury was not a risk factor.

Colorimetric Aptasensor of Vitamin D3: A Novel Approach to Eliminate Residual Adhesion between Aptamers and Gold Nanoparticles.

Colorimetric aptasensors based on gold nanoparticles (AuNPs) commonly feature ssDNA probes nonspecifically adsorbed to surface gold particles. A major limitation of this versatile method is the incomplete dissociation of the adsorbed nontarget binding segments of the aptamer sequence upon target binding. This results in weak or nonexistent sensor performance by preventing the particles from aggregating when the optimized salt concentration is added. Rather than removing the nonbinding nucleotides flanking the binding region of the aptamer, proposed herein is an alternative strategy, simply introducing a centrifugation and resuspension step after target recognition that eliminates residual binding between the aptamer and the surface of the particles. The performance of two different vitamin D3 (VTD3) aptamers were tested. The method enhanced the performance of the sensor that used the higher detection limit (1 µM) aptamer by fourfold. The superiority of the proposed method became apparent in a nonworking colorimetric sensor became a highly sensitive sensor with a one nanomolar detection level and excellent discrimination against potential interfering molecules including VTD2 when the centrifugation and resuspension process was implemented. The level of VTD3 in human blood was determined colorimetrically after extraction with n-hexane. The results were in agreement with those obtained by HPLC. The proposed method could be applied to aptamers targeting small molecules with no need to reprocess the SELEX-isolated sequence by knowing the binding region and removing the flanking primers.

Patterns and determinants of stress among consultant physicians working in Saudi Arabia.

BACKGROUND: Physicians experience several work-related stressors that have been mounting up in recent decades. This study aimed to examine perceived stress and its risk factors and consequences among consultant physicians in Saudi Arabia. METHODS: A cross-sectional study was conducted from November 2014 to March 2015 among physicians who were assigned rank of consultant. The stress level was assessed using perceived stress scale (PSS). RESULTS: A total of 582 consultants participated. The average age was 46.9±7.9 years, 71% were males, 56% were Saudi, 15% were smokers, and 68% slept ≤6 hours per night. The median PSS score was 17 (interquartile range of 14-21), which represented 44% of maximum possible PSS score. The upper tertile of PSS score (represents a high stress level) was significantly associated with being younger, female, and Saudi. The majority (85%) considered job environment to be stressful and ~50% attributed that to a high workload and a noncooperative administration. In the year preceding this study, half of consultants frequently contemplated or even worked toward changing their medical institutes or even moving to work outside Saudi Arabia because of perception of a stressful working environment. Over the previous year, encountering life stressors, considering job environment as stressful and experiencing passive suicidal ideation, were significantly associated with higher levels of stress. In multivariate analysis, the following factors were independently associated with stress: female gender (odds ratio [OR]=2.41, 95% CI 1.58-3.70) and perceived stressful working environment (OR=3.66, 95% CI 1.87-7.17). CONCLUSION: Consultant physicians in Saudi Arabia experience moderate to high levels of perceived stress that are relatively comparable to physicians worldwide. A significant association was found between stress levels and both female gender and perception of a stressful working environment. Further studies are required to assess physician-based interventions and organization-directed approaches to management of stress among physicians.

Iron supported on bioinspired green silica for water remediation.

Iron has been used previously in water decontamination, either unsupported or supported on clays, polymers, carbons or ceramics such as silica. However, the reported synthesis procedures are tedious, lengthy (involving various steps), and either utilise or produce toxic chemicals. Herein, the use of a simple, rapid, bio-inspired green synthesis method is reported to prepare, for the first time, a family of iron supported on green nanosilica materials (Fe@GN) to create new technological solutions for water remediation. In particular, Fe@GN were employed for the removal of arsenate ions as a model for potentially toxic elements in aqueous solution. Several characterization techniques were used to study the physical, structural and chemical properties of the new Fe@GN. When evaluated as an adsorption platform for the removal of arsenate ions, Fe@GN exhibited high adsorption capacity (69 mg of As per g of Fe@GN) with superior kinetics (reaching ∼35 mg As per g sorbent per hr) - threefold higher than the highest removal rates reported to date. Moreover, a method was developed to regenerate the Fe@GN allowing for a full recovery and reuse of the adsorbent in subsequent extractions; strongly highlighting the potential technological benefits of these new green materials.