RESUMO
When COVID-19 was first announced back in 2019, there were vast number of attempts to halt the progression of the SARS-CoV-2 virus once and for all [...].
RESUMO
The aim of this study was to compare patients' satisfaction and quality of life (QoL) when using implant overdentures vs. conventional dentures. The QoL of Saudi patients who were provided mandibular implant-supported overdentures was assessed using a structured questionnaire. Overall satisfaction; ability to speak, eat, and chew food; comfort; esthetics; stability; and satisfaction of general oral health were measured. A total of 48.3% vs. 6.9% were, overall, very satisfied with their implant overdentures and conventional dentures, respectively. A total of 37.9% of the patients were very satisfied regarding speaking with their implant overdentures vs. 17.2% with conventional dentures. Furthermore, 41.4% were very comfortable with their implant overdentures vs. 5.2% were very comfortable using conventional dentures. However, only 15.5% were very satisfied with the esthetics of the conventional dentures compared to 43.1% being satisfied with implant overdentures. Only 1.7% were very satisfied with the stability of conventional dentures vs. 44.8% being satisfied using implant overdentures. About 8.6% of the candidates were very satisfied regarding chewing food with conventional dentures vs. 36.2% being very satisfied using implant overdentures. Approximately 10.3% were very satisfied with their general oral health using conventional dentures compared to 29.3% being very satisfied using implant overdentures. Mandibular implant overdentures had a strong impact on patients' quality of life over conventional complete dentures and should be considered the minimum standard of care provided to completely edentulous patients.
Assuntos
Revestimento de Dentadura , Qualidade de Vida , Prótese Total , Humanos , Mastigação , Satisfação do Paciente , Arábia SauditaRESUMO
OBJECTIVES: Achieving a natural smile while restoring anterior teeth is challenging. Selecting appropriate dimensions of teeth is important for aesthetics. This study aims to measure and analyse the dimensions of the maxillary anterior teeth and their relative width proportions in a Saudi subpopulation. METHODS: One hundred and eighty patients (112 men and 68 women) with intact maxillary anterior teeth (age range = 20-30 years) participated in this research. Maxillary impressions (Vinyl Polysiloxane) were created and poured. A digital caliper was used to record the length and width of maxillary anterior teeth in millimetres (mm) from the dental casts, and the casts were digitally photographed to calculate relative width ratios. RESULTS: The mean width for central incisor was 8.74 mm (men = 8.89 mm, women = 8.60 mm), lateral incisor 6.64 mm (men = 6.79 mm, women = 6.49 mm) and canine 7.82 mm (men = 8.01 mm women = 7.63 mm). The recorded mean lengths for these teeth were 9.84 mm (men = 10.04 mm, women = 9.64 mm), 8.09 mm (men = 8.30 mm, women = 7.89 mm) and 9.08 mm (men = 9.48 mm, women = 8.69 mm). The mean values of apparent width/width ratio measured on the cast photographs were 63.69 mm for the lateral incisor/central incisor and 78.35 mm for canine/lateral incisor. No statistically significant difference was found between the mean values of the apparent width/width ratio of the right and left sides and between men and women. CONCLUSIONS: This study showed a minor asymmetry between left and right side anterior teeth among the participants. The width to length ratio of the central and lateral incisors was similar for both genders, with minor differences in the canines. A squarish form of anterior teeth for the Saudi population with dimensional similarities to the Turkish population was found.
RESUMO
Sialic acid that presents on the surface of lung epithelial cells is considered as one of the main binding targets for many respiratory viruses, including influenza and the current coronavirus (SARS-CoV-2) through the viral surface protein hemagglutinin. Gold nanoparticles (Au NPs) are extensively used in the diagnostic field owing to a phenomenon known as 'surface plasmonic resonance' in which the scattered light is absorbed by these NPs and can be detected via UV-Vis spectrophotometry. Consequently, sialic acid conjugated Au NPs (SA-Au NPs) were utilized for their plasmonic effect against SARS-CoV-2, influenza B virus, and Middle-East respiratory syndrome-related coronavirus (MERS) in patients' swab samples. The SA-Au NPs system was prepared by a one-pot synthesis method, through which the NPs solution color changed from pale yellow to dark red wine color, indicting its successful preparation. In addition, the SA-Au NPs had an average particle size of 30 ± 1 nm, negative zeta potential (-30 ± 0.3 mV), and a UV absorbance of 525 nm. These NPs have proven their ability to change the color of the NPs solutions and patients' swabs that contain SARS-CoV-2, influenza B, and MERS viruses, suggesting a rapid and straightforward detection tool that would reduce the spread of these viral infections and accelerate the therapeutic intervention.
RESUMO
OBJECTIVE: In consideration of the current nursing shortage in Saudi Arabia, we aimed to investigate the association among perceptions of work environment, communication satisfaction, and intentions to quit nursing profession among nurses. In addition, we aimed to investigate the mediating effect of communication satisfaction on the association between nurses' perception of work environment and their intentions to quit nursing profession. METHODS: This predictive correlational study was conducted at one of the major hospitals in Saudi Arabia from January 2020 to March 2020. It included a convenience sample of 367 full-time registered nurses who completed three types of close-ended questionnaires. We used IBM SPSS version 24.0 to analyze the collected data. Regression analyses were used to test the study's hypotheses. All regression assumptions were assessed and confirmed. Significance for all tests was set at p ≤ .05. RESULTS: The findings indicated an affirmative association between work environment perception and communication satisfaction (b = .764, p < .05) among nurses. In addition, findings showed that work environment perception (b = -.187, p < .05) and communication satisfaction (b = -.226, p < .05) have negative impacts on the nurses' intentions to quit; indicating that as work environment perception or communication satisfaction increases, the intention to quit decreases among nurses. Further, a mediation effect of communication satisfaction on the relationship between work environment perception and intention to quit was confirmed. CONCLUSION: This study presents a novel conceptual framework developed based on the literature about the predisposing factors for nurses' intentions to quit nursing profession. Our results suggest that work environment perception and communication satisfaction among the most contributing factors for nurses resignation. Effective communication was established as a crucial factor for establishing attractive and healthy working environment. Nursing managers can benefit by applying these findings to develop appropriate strategies to inhibit the shortage of nurses in Saudi Arabia.
RESUMO
PURPOSE: To evaluate the flexural strength, elastic modulus, microhardness, and surface roughness of monolithic zirconia, lithium disilicate ceramics, and feldspathic ceramics after being exposed to different acidic solutions. MATERIALS AND METHODS: Rectangular specimens (n = 180) were prepared from three different ceramic materials: lithium disilicate, monolithic zirconia, and feldspathic porcelain. Initial Surface roughness of ninety specimens (n = 30/material) was evaluated using an optical noncontact profilometer. Thirty specimens of each material were immersed in one of the following solutions (n = 10/group): citric acid; acidic beverage; and artificial saliva, which served as the control. Post immersion surface roughness, flexural strength, and elastic modulus were determined using an optical noncontact profilometer and three-point bending test. Another thirty specimens of each material were immersed in the aqueous solutions (n = 10/group) following the same protocol and subjected to microhardness test using a Vickers diamond microhardness tester. A scanning electron microscope (SEM) was used to examine the surface characteristics changes. ANOVA and Post-hoc Tukey's Kramer tests were used for data analysis (α = 0.05). RESULTS: Immersion in different solutions did not affect the flexural strength and elastic modulus of lithium disilicate or zirconia. Microhardness and surface roughness were significantly affected in all groups (p < 0.05). For feldspathic porcelain groups, the flexural strength and elastic modulus were significantly decreased in the citric acid group (p = 0.045 and p = 0.019). Also, there were significant differences among all feldspathic porcelain groups (p = 0.001) in terms of microhardness and surface roughness values. CONCLUSIONS: The tested acidic agents significantly affected the flexural strength, elastic modulus, surface roughness, and microhardness of feldspathic porcelain. However, the flexural strength and elastic modulus of evaluated lithium disilicate and zirconia did not change significantly.
Assuntos
Cerâmica , Porcelana Dentária , Desenho Assistido por Computador , Resistência à Flexão , Teste de Materiais , Propriedades de Superfície , ZircônioRESUMO
AIM: This study aimed to investigate the influence of using dual-cure composite core materials for fiber post luting on the fracture resistance of endodontically treated maxillary central incisors. MATERIALS AND METHODS: Fifty sound and recently extracted maxillary central incisors were endodontically treated and distributed into five groups. In the control group, access cavities were restored with the composite resin. Experimental groups had the coronal structure trimmed 2 mm above the cementoenamel junction. Teeth were restored with fiber posts and different combinations of luting and core materials: RelyX Unicem for post luting and MultiCore for core buildup; MultiCore for post luting and core buildup; RelyX Unicem for post luting and LuxaCore for core buildup; or LuxaCore for post luting and core buildup. All teeth were restored with zirconium crowns and subjected to thermocycling (6000 cycles 5/55°C). Loading of the teeth was applied at 135° to the palatal surface, using a universal testing machine at a cross-speed of 0.5 mm/minute until failure. The mode of failure was analyzed under a digital microscope. RESULTS: The fracture resistance of the control group was significantly higher than the experimental groups (p < 0.05). There was no significant difference between the experimental groups (p > 0.05). All teeth demonstrated nonrestorable failures. CONCLUSION: With the presence of the ferrule effect and crown restoration, the selected materials for post luting and core buildup have no significant influence on the fracture resistance of the endodontically treated teeth. CLINICAL SIGNIFICANCE: The use of the same dual-cure composite core materials for fiber post luting and core buildup would simplify the clinical procedure without enhancement of the fracture resistance of the endodontically treated tooth.