Cyclic Ether Derived Stable Solid Electrolyte Interphase on Bismuth Anodes for Ultrahigh-Rate Sodium-Ion Storage.

The bismuth anode has garnered significant attention due to its high theoretical Na-storage capacity (386 mAh g-1). There have been numerous research reports on the stable solid electrolyte interphase (SEI) facilitated by electrolytes utilizing ether solvents. In this contribution, cyclic tetrahydrofuran (THF) and 2-methyltetrahydrofuran (MeTHF) ethers are employed as solvents to investigate the sodium-ion storage properties of bismuth anodes. A series of detailed characterizations are utilized to analyze the impact of electrolyte solvation structure and SEI chemical composition on the kinetics of sodium-ion storage. The findings reveal that bismuth anodes in both THF and MeTHF-based electrolytes exhibit exceptional rate performance at low current densities, but in THF-based electrolytes, the reversible capacity is higher at high current densities (316.7 mAh g-1 in THF compared to 9.7 mAh g-1 in MeTHF at 50 A g-1). This stark difference is attributed to the formation of an inorganic-rich, thin, and uniform SEI derived from THF-based electrolyte. Although the SEI derived from MeTHF-based electrolyte also consists predominantly of inorganic components, it is thicker and contains more organic species compared to the THF-derived SEI, impeding charge transfer and ion diffusion. This study offers valuable insights into the utilization of cyclic ether electrolytes for Na-ion batteries.

Passivation Layers in Mg-Metal Batteries: Robust Interphases for Li-Metal Batteries.

In advanced batteries, interphases serve as the key component in stabilizing the electrolyte with reactive electrode materials far beyond thermodynamic equilibria. While an active interphase facilitates the transport of working ions, an inactive interphase obstructs ion flow, constituting the primary barrier to the realization of battery chemistries. Here, a successful transformation of a traditionally inactive passivating layer on Mg-metal anode, characteristic of Mg-metal batteries with typical carbonate electrolytes, into an active and robust interphase in the Li-metal scenario is presented. By further strategically designing magnesiated Li+ electrolytes, the in situ development of this resilient interphase on Li-metal anodes, imparting enduring stability to Li-metal batteries with nickel-rich cathodes is induced. It is identified that the strong affinity between Mg2+ and anions in magnesiated Li+ electrolytes assembles ionic clusters with a bias for reducibility, thereby catalyzing the creation of anion-derived interphases rich in inorganic constituents. The prevalence of ionic clusters induced by magnesiation of electrolytes has brought properties only available in high-concentration electrolytes, suggesting a fresh paradigm of tailing electrolytes for highly reversible LMBs.

Engineering High-Performance Li Metal Batteries through Dual-Gradient Porous Cu-CuZn Host.

Porous copper (Cu) current collectors show promise in stabilizing Li metal anodes (LMAs). However, insufficient lithiophilicity of pure Cu and limited porosity in three-dimensional (3D) porous Cu structures led to an inefficient Li-Cu composite preparation and poor electrochemical performance of Li-Cu composite anodes. Herein, we propose a porous Cu-CuZn (DG-CCZ) host for Li composite anodes to tackle these issues. This architecture features a pore size distribution and lithiophilic-lithiophobic characteristics designed in a gradient distribution from the inside to the outside of the anode structure. This dual-gradient porous Cu-CuZn exhibits exceptional capillary wettability to molten Li and provides a high porosity of up to 66.05%. This design promotes preferential Li deposition in the interior of the porous structure during battery operation, effectively inhibiting Li dendrite formation. Consequently, all cell systems achieve significantly improved cycling stability, including Li half-cells, Li-Li symmetric cells, and Li-LFP full cells. When paired synergistically with the double-coated LiFePO4 cathode, the pouch cell configured with multiple electrodes demonstrates an impressive discharge capacity of 159.3 mAh g-1 at 1C. We believe this study can inspire the design of future 3D Li anodes with enhanced Li utilization efficiency and facilitate the development of future high-energy Li metal batteries.

Ultrafast Coherent Hole Injection at the Interface between CuSCN and Polymer PM6 Using Femtosecond Mid-Infrared Spectroscopy.

Tracking the dynamics of ultrafast hole injection into copper thiocyanate (CuSCN) at the interface can be experimentally challenging. These challenges include restrictions in accessing the ultraviolet spectral range through transient electronic spectroscopy, where the absorption spectrum of CuSCN is located. Time-resolved vibrational spectroscopy solves this problem by tracking marker modes at specific frequencies and allowing direct access to dynamical information at the molecular level at donor-acceptor interfaces in real time. This study uses photoabsorber PM6 (poly[(2,6-(4,8-bis(5-(2-ethylhexyl-3-fluoro)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)-benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))]) as a model system to explore and decipher the hole transfer dynamics of CuSCN using femtosecond (fs) mid-infrared (IR) spectroscopy. The time-resolved results indicate that excited PM6 exhibits a sharp vibrational mode at 1599 cm-1 attributed to the carbonyl group, matching the predicted frequency position obtained from time-dependent density functional theory (DFT) calculations. The fs mid-IR spectroscopy demonstrates a fast formation (<168 fs) and blue spectral shift of the CN stretching vibration from 2118 cm-1 for CuSCN alone to 2180 cm-1 for PM6/CuSCN, confirming the hole transfer from PM6 to CuSCN. The short interfacial distance and high frontier orbital delocalization obtained from the interfacial DFT models support a coherent and ultrafast regime for hole transfer. These results provide direct evidence for hole injection at the interface of CuSCN for the first time using femtosecond mid-IR spectroscopy and serve as a new investigative approach for interfacial chemistry and solar cell communities.

Suppressing Dielectric Loss in MXene/Polymer Nanocomposites through Interfacial Interactions.

Although numerous polymer-based composites exhibit excellent dielectric permittivity, their dielectric performance in various applications is severely hampered by high dielectric loss induced by interfacial space charging and a leakage current. Herein, we demonstrate that embedding molten salt etched MXene into a poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE))/poly(methyl methacrylate) (PMMA) hybrid matrix induces strong interfacial interactions, forming a close-packed inner polymer layer and leading to significantly suppressed dielectric loss and markedly increased dielectric permittivity over a broad frequency range. The intensive molecular interaction caused by the dense electronegative functional terminations (-O and -Cl) in MXene results in restricted polymer chain movement and dense molecular arrangement, which reduce the transportation of the mobile charge carriers. Consequently, compared to the neat polymer, the dielectric constant of the composite with 2.8 wt % MXene filler increases from ∼52 to ∼180 and the dielectric loss remains at the same value (∼0.06) at 1 kHz. We demonstrate that the dielectric loss suppression is largely due to the formation of close-packed interfaces between the MXene and the polymer matrix.

Leveraging Intermolecular Charge Transfer for High-Speed Optical Wireless Communication.

Intermolecular charge transfer (CT) complexes have emerged as versatile platforms with customizable optical properties that play a pivotal role in achieving tunable photoresponsive materials. In this study, we introduce an innovative approach for enhancing the modulation bandwidth and net data rates in optical wireless communications (OWCs) by manipulating combinations of monomeric molecules within intermolecular CT complexes. Concurrently, we extensively investigate the intermolecular charge transfer mechanism through diverse steady-state and ultrafast time-resolved spectral techniques in the mid-infrared range complemented by theoretical calculations using density functional theory. These intermolecular CT complexes empower precise control over the -3 dB bandwidth and net data rates in OWC applications. The resulting color converters exhibit promising performance, achieving a net data rate of ∼100 Mb/s, outperforming conventional materials commonly used in the manufacture of OWC devices. This research underscores the substantial potential of engineering intermolecular charge transfer complexes as an ongoing progression and commercialization within the OWC. This carries profound implications for future initiatives in high-speed and secure data transmission, paving the way for promising endeavors in this area.

Highly Stable ZnS Anodes for Sodium-Ion Batteries Enabled by Structure and Electrolyte Engineering.

Zinc sulfide is a promising high-capacity anode for practical sodium-ion batteries, considering its high capacity and the low cost of zinc and sulfur sources. However, the pulverization of particulate zinc sulfide causes active mass collapse and penetration-induced short circuits of batteries. Herein, a zinc sulfide encapsulated in a nitrogen-doped carbon shell (ZnS@NC) was developed for high-performance anodes. The confinement effect of nitrogen-doped carbon stabilizes the active mass structure during cycling thanks to the robust chemically and electronically bonded connections between nitrogen-doped carbon and zinc sulfide nanoparticles. Furthermore, the cycling stability of the ZnS@NC anode is boosted by the robust inorganic-rich solid electrolyte interphase (SEI) formed in cyclic and linear ether-based electrolytes. The ZnS@NC anode displayed a reversible specific capacity of 584 mAh g-1, an excellent rate capability of 327 mAh g-1 at 70 A g-1, and a highly stable cycling performance over 10000 cycles. This work provides a practical and promising approach to designing stable conversion anodes for high-performance sodium-ion batteries.

Real-Time Tracking of Hot Carrier Injection at the Interface of FAPbBr3 Perovskite Using Femtosecond Mid-IR Spectroscopy.

One of the most effective approaches to optimizing the performance of perovskite solar cells is to fully understand the ultrafast carrier dynamics at the interfaces between absorber and transporting layers at both the molecular and atomic levels. Here, the injection dynamics of hot and relaxed charge carriers at the interface between the hybrid perovskite, formamidinium lead bromide (FAPbBr3), and the organic electron acceptor, IEICO-4F, are investigated and deciphered by using femtosecond (fs) mid-infrared (IR), transient absorption (TA), and fluorescence spectroscopies. The visible femtosecond-TA measurements reveal the generation of hot carriers and their transition to free carriers in the pure FAPbBr3 film. Meanwhile, the efficient extraction of hot carriers in the mixed FAPbBr3/IEICO-4F film is clearly evidenced by the complete disappearance of their spectral signature. More specifically, the time-resolved results reveal that hot carriers are injected from FAPbBr3 to IEICO-4F within 150 fs, while the transfer time for the relaxed carriers is about 205 fs. The time-resolved mid-IR experiments also demonstrate the ultrafast formation of two peaks at 2115 and 2233 cm-1, which can be attributed to the C≡N symmetrical and asymmetrical vibrational modes of anionic IEICO-4F, thus providing crystal clear evidence for the electron transfer process between the donor and acceptor units. Moreover, photoluminescence (PL) lifetime measurements reveal an approximately 10-fold decrease in the donor lifetime in the presence of IEICO-4F, thereby confirming the efficient electron injection from the perovskite to the acceptor unit. In addition, the efficient electron injection at the FAPbBr3/IEICO-4F interface and its impact on the C≡N bond character are experimentally evidenced and align with density functional theory (DFT) calculations. This work offers new insights into the electron injection process at the FAPbBr3/IEICO-4F interface, which is crucial for developing efficient optoelectronic devices.

Sustainable Dual-Ion Batteries beyond Li.

The limitations of resources used in current Li-ion batteries may hinder their widespread use in grid-scale energy storage systems, prompting the search for low-cost and resource-abundant alternatives. "Beyond-Li cation" batteries have emerged as promising contenders; however, they confront noteworthy challenges due to the scarcity of suitable host materials for these cations. In contrast, anions, the other crucial component in electrolytes, demonstrate reversible intercalation capacity in specific materials like graphite. The convergence of anion and cation storage has given rise to a new battery technology known as dual-ion batteries (DIBs). This comprehensive review presents the current status, advancements, and future prospects of sustainable DIBs beyond Li. Notably, most DIBs exhibit similar cathode reaction mechanisms involving anion intercalation, while the distinguishing factor lies in the cation types functioning at the anode. Accordingly, the review is organized into sections by various cation types, including Na-, K-, Mg-, Zn-, Ca-, Al-, NH4 + -, and proton-based DIBs. Moreover, a perspective on these novel DIBs is presented, along with proposed protocols for investigating DIBs and promising future research directions. It is envisioned that this review will inspire fresh concepts, ideas, and research directions, while raising important questions to further tailor and understand sustainable DIBs, ultimately facilitating their practical realization.

Anisotropic Superconducting Nb2 CTx MXene Processed by Atomic Exchange at the Wafer Scale.

Superconductivty has recently been induced in MXenes through surface modification. However, the previous reports have mostly been based on powders or cold-pressed pellets, with no known reports on the intrinsic superconsucting properties of MXenes at the nanoale. Here, it is developed a high-temperature atomic exchange process in NH3 atmosphere which induces superconductivity in either singleflakes or thin films of Nb2 CTx MXene. The exchange process between nitrogen atoms and fluorine, carbon, and oxygen atoms in the MXene lattice and related structural adjustments are studied using both experiments and density functional theory. Using either single-flake or thin-film devices, an anisotropic magnetic response of the 2D superconducting transformation has been successfully revealed. The anisotropic superconductivity is further demonstrated using superconducting thin films uniformly deposited over a 4 in. wafers, which opens up the possibility of scalable MXene-based superconducting devices.

Peptide Gel Electrolytes for Stabilized Zn Metal Anodes.

The rechargeable aqueous Zn ion battery (AZIB) is considered a promising candidate for future energy storage applications due to its intrinsic safety features and low cost. However, Zn dendrites and side reactions (e.g., corrosion, hydrogen evolution reaction, and inactive side product (Zn hydroxide sulfate) formation) at the Zn metal anode have been serious obstacles to realizing a satisfactory AZIB performance. The application of gel electrolytes is a common strategy for suppressing these problems, but the normally used highly cross-linked polymer matrix (e.g., polyacrylamide (PAM)) brings additional difficulties for battery assembly and recycling. Herein, we have developed a gel electrolyte for Zn metal anode stabilization, where a peptide matrix, a highly biocompatible material, is used for gel construction. Various experiments and simulations elucidate the sulfate anion-assisted self-assembly gel formation and its effect in stabilizing Zn metal anodes. Unlike polymer gel electrolytes, the peptide gel electrolyte can reversibly transform between gel and liquid states, thus facilitating the gel-involved battery assembly and recycling. Furthermore, the peptide gel electrolyte provides fast Zn ion diffusion (comparable to conventional liquid electrolyte) while suppressing side reactions and dendrite growth, thus achieving highly stable Zn metal anodes as validated in various cell configurations. We believe that our concept of gel electrolyte design will inspire more future directions for Zn metal anode protection based on gel electrolyte design.

High-performance van der Waals antiferroelectric CuCrP2S6-based memristors.

Layered thio- and seleno-phosphate ferroelectrics, such as CuInP2S6, are promising building blocks for next-generation nonvolatile memory devices. However, because of the low Curie point, the CuInP2S6-based memory devices suffer from poor thermal stability (<42 °C). Here, exploiting the electric field-driven phase transition in the rarely studied antiferroelectric CuCrP2S6 crystals, we develop a nonvolatile memristor showing a sizable resistive-switching ratio of ~ 1000, high switching endurance up to 20,000 cycles, low cycle-to-cycle variation, and robust thermal stability up to 120 °C. The resistive switching is attributed to the ferroelectric polarization-modulated thermal emission accompanied by the Fowler-Nordheim tunneling across the interfaces. First-principles calculations reveal that the good device performances are associated with the exceptionally strong ferroelectric polarization in CuCrP2S6 crystal. Furthermore, the typical biological synaptic learning rules, such as long-term potentiation/depression and spike amplitude/spike time-dependent plasticity, are also demonstrated. The results highlight the great application potential of van der Waals antiferroelectrics in high-performance synaptic devices for neuromorphic computing.

Highly Reversible Zn Anodes Achieved by Enhancing Ion-Transport Kinetics and Modulating Zn (002) Deposition.

Uncontrolled dendrite growth and water-related side reactions in mild electrolytes are the main causes of poor cycling stability of zinc anodes, resulting in the deterioration of aqueous zinc-based batteries. Herein, a multifunctional fluorapatite (Ca5(PO4)3F) aerogel (FAG) interface layer is proposed to realize highly stable zinc anodes via the integrated regulation of Zn2+ migration kinetics and Zn (002) orientation deposition. Owing to the well-defined aerogel nanochannels and the rich Zn2+ adsorption sites resulting from the ion exchange between Ca2+ and Zn2+, the FAG interface layer could significantly accelerate the Zn2+ migration and effectively homogenize the Zn2+ flux and nucleation sites, thus promoting rapid and uniform Zn2+ migration at the electrode/electrolyte interface. Additionally, during the cycling process, the F atoms from FAG promote the in situ generation of ZnF2, which facilitates the manipulation of the preferred Zn (002) orientation deposition, thus efficiently suppressing dendrite growth and side reactions by combining with the above synergistic effects. Consequently, the FAG-modified Zn anode displays a stable cycle life of over 4000 h at 1 mA cm-2 and exhibits highly reversible Zn plating/stripping behavior. Meanwhile, the Zn||MnO2 full cells exhibit improved cycle stability over 2000 cycles compared with that of the bare Zn, highlighting the virtues of the FAG protective layer for highly reversible Zn anodes. Our work brings the insight in to stabilize Zn anodes and power the commercial applications of aqueous zinc-based batteries.

Discovery of a three-proton insertion mechanism in α-molybdenum trioxide leading to enhanced charge storage capacity.

The α-molybdenum trioxide has attracted much attention for proton storage owing to its easily modified bilayer structure, fast proton insertion kinetics, and high theoretical specific capacity. However, the fundamental science of the proton insertion mechanism in α-molybdenum trioxide has not been fully understood. Herein, we uncover a three-proton intercalation mechanism in α-molybdenum trioxide using a specially designed phosphoric acid based liquid crystalline electrolyte. The semiconductor-to-metal transition behavior and the expansion of the lattice interlayers of α-molybdenum trioxide after trapping one mole of protons are verified experimentally and theoretically. Further investigation of the morphology of α-molybdenum trioxide indicates its fracture behavior upon the proton intercalation process, which creates diffusion channels for hydronium ions. Notably, the observation of an additional redox behavior at low potential endows α-molybdenum trioxide with an improved specific discharge capacity of 362 mAh g-1.

Optimized Charge Storage in Aza-Based Covalent Organic Frameworks by Tuning Electrolyte Proton Activity.

Proton activity in electrolytes plays a crucial role in deciding the electrochemical performance of aqueous batteries. On the one hand, it can influence the capacity and rate performance of host materials because of the high redox activity of protons. On the other hand, it can also cause a severe hydrogen evolution reaction (HER) when the protons are aggregated near the electrode/electrolyte interface. The HER dramatically limits the potential window and the cycling stability of the electrodes. Therefore, it is critical to clarify the impact of electrolyte proton activity on the battery macro-electrochemical performance. In this work, using an aza-based covalent organic framework (COF) as a representative host material, we studied the effect of electrolyte proton activity on the potential window, storage capacity, rate performance, and cycle stability in various electrolytes. A tradeoff relationship between proton redox reactions and the HER in the COF host is revealed by utilizing various in situ and ex situ characterizations. Moreover, the origin of proton activity in near-neutral electrolytes is discussed in detail and is confirmed to be related to the hydrated water molecules in the first solvation shell. A detailed analysis of the charge storage process in the COFs is presented. These understandings can be of importance for utilizing the electrolyte proton activity to build high-energy aqueous batteries.

TADF-Based X-ray Screens with Simultaneously Efficient Singlet and Triplet Energy Transfer for High Spatial Imaging Resolution.

X-ray imaging scintillators play a crucial role in medical examinations and safety inspections, making them an essential technology in our modern lives. However, commercially available high-performance scintillators are fabricated exclusively from ceramic materials that require harsh preparation conditions and are costly to produce. Organic scintillators have emerged as a promising alternative due to their transparency and ease of fabrication at a low cost. Unfortunately, organic scintillators suffer from inefficient exciton utilization efficiency, leading to poor performance in X-ray imaging screens and hindering their commercialization. In this study, we explore the use of thermally activated delayed fluorescence (TADF) chromophores (4CzIPN-I and 4CzTPN) to enhance the absorption of ionizing radiation in X-ray imaging screens by an order of magnitude. By leveraging the unique features of TADF chromophores through simultaneously singlet-singlet and triplet-triplet efficient energy transfers at the interface between two different TADF systems, we demonstrate an impressive X-ray sensitivity and radioluminescence intensity. Our time-resolved experiments and density functional theory (DFT) calculations provide further evidence for the effectiveness of this approach. The resulting X-ray imaging screens based on this efficient interfacial energy transfer process in TADF systems exhibit outstanding X-ray imaging resolution of 20 line pairs/mm, the highest resolution reported thus far for organic scintillators. This resolution is at least two times higher than that achieved by commonly used commercial inorganic scintillators in the X-ray imaging market. These findings introduce a new component for greatly improving the performance of organic X-ray imaging scintillators, supporting a wide range of emerging X-ray applications with exceptional spatial resolution.

A Laser-Induced Mo2 CTx MXene Hybrid Anode for High-Performance Li-Ion Batteries.

MXenes, a fast-growing family of two-dimensional (2D) transition metal carbides/nitrides, are promising for electronics and energy storage applications. Mo2 CTx MXene, in particular, has demonstrated a higher capacity than other MXenes as an anode for Li-ion batteries. Yet, such enhanced capacity is accompanied by slow kinetics and poor cycling stability. Herein, it is revealed that the unstable cycling performance of Mo2 CTx is attributed to the partial oxidation into MoOx with structural degradation. A laser-induced Mo2 CTx /Mo2 C (LS-Mo2 CTx ) hybrid anode has been developed, of which the Mo2 C nanodots boost redox kinetics, and the laser-reduced oxygen content prevents the structural degradation caused by oxidation. Meanwhile, the strong connections between the laser-induced Mo2 C nanodots and Mo2 CTx nanosheets enhance conductivity and stabilize the structure during charge-discharge cycling. The as-prepared LS-Mo2 CTx anode exhibits an enhanced capacity of 340 mAh g-1 vs 83 mAh g-1 (for pristine) and an improved cycling stability (capacity retention of 106.2% vs 80.6% for pristine) over 1000 cycles. The laser-induced synthesis approach underlines the potential of MXene-based hybrid materials for high-performance energy storage applications.

Structure and Interface Engineering of Ultrahigh-Rate 3D Bismuth Anodes for Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) have attracted tremendous attention as promising low-cost energy storage devices in future grid-scale energy management applications. Bismuth is a promising anode for SIBs due to its high theoretical capacity (386 mAh g-1 ). Nevertheless, the huge volume variation of Bi anode during (de)sodiation processes can cause the pulverization of Bi particulates and rupture of solid electrolyte interphase (SEI), resulting in quick capacity decay. It is demonstrated that rigid carbon framework and robust SEI are two essentials for stable Bi anodes. A lignin-derived carbonlayer wrapped tightly around the bismuth nanospheres provides a stable conductive pathway, while the delicate selection of linear and cyclic ether-based electrolytes enable robust and stable SEI films. These two merits enable the long-term cycling process of the LC-Bi anode. The LC-Bi composite delivers outstanding sodium-ion storage performance with an ultra-long cycle life of 10 000 cycles at a high current density of 5 A g-1 and an excellent rate capability of 94% capacity retention at an ultrahigh current density of 100 A g-1 . Herein, the underlying origins of performance improvement of Bi anode are elucidated, which provides a rational design strategy for Bi anodes in practical SIBs.

Large-Area Metal-Semiconductor Heterojunctions Realized via MXene-Induced Two-Dimensional Surface Polarization.

Direct MXene deposition on large-area 2D semiconductor surfaces can provide design versatility for the fabrication of MXene-based electronic devices (MXetronics). However, it is challenging to deposit highly uniform wafer-scale hydrophilic MXene films (e.g., Ti3C2Tx) on hydrophobic 2D semiconductor channel materials (e.g., MoS2). Here, we demonstrate a modified drop-casting (MDC) process for the deposition of MXene on MoS2 without any pretreatment, which typically degrades the quality of either MXene or MoS2. Different from the traditional drop-casting method, which usually forms rough and thick films at the micrometer scale, our MDC method can form an ultrathin Ti3C2Tx film (ca. 10 nm) based on a MXene-introduced MoS2 surface polarization phenomenon. In addition, our MDC process does not require any pretreatment, unlike MXene spray-coating that usually requires a hydrophilic pretreatment of the substrate surface before deposition. This process offers a significant advantage for Ti3C2Tx film deposition on UV-ozone- or O2-plasma-sensitive surfaces. Using the MDC process, we fabricated wafer-scale n-type Ti3C2Tx-MoS2 van der Waals heterojunction transistors, achieving an average effective electron mobility of ∼40 cm2·V-1·s-1, on/off current ratios exceeding 104, and subthreshold swings of under 200 mV·dec-1. The proposed MDC process can considerably enhance the applications of MXenes, especially the design of MXene/semiconductor nanoelectronics.

Singlet Fission-Based High-Resolution X-Ray Imaging Scintillation Screens.

X-ray imaging technology is critical to numerous different walks of daily life, ranging from medical radiography and security screening all the way to high-energy physics. Although several organic chromophores are fabricated and tested as X-ray imaging scintillators, they generally show poor scintillation performance due to their weak X-ray absorption cross-section and inefficient exciton utilization efficiency. Here, a singlet fission-based high-performance organic X-ray imaging scintillator with near unity exciton utilization efficiency is presented. Interestingly, it is found that the X-ray sensitivity and imaging resolution of the singlet fission-based scintillator are dramatically improved by an efficient energy transfer from a thermally activated delayed fluorescence (TADF) sensitizer, in which both singlet and triplet excitons can be efficiently harnessed. The fabricated singlet fission-based scintillator exhibits a high X-ray imaging resolution of 27.5 line pairs per millimeter (lp mm-1 ), which exceeds that of most commercial scintillators, demonstrating its high potential use in medical radiography and security inspection.