Antibacterial efficacy of copper-based metal-organic frameworks against Escherichia coli and Lactobacillus.

The widespread and excessive use of antimicrobial drugs has resulted in a concerning rise in bacterial resistance, leading to a risk of untreatable infections. The aim of this study was to formulate a robust and efficient antibacterial treatment to address this challenge. Previous work focused on the effectiveness of the Cu-BTC metal-organic framework (MOF; BTC stands for 1,3,5-benzenetricarboxylate) in combatting various bacterial strains. Herein, we compare the antibacterial properties of Cu-BTC with our newly designed Cu-GA MOF, consisting of copper ions bridged by deprotonated gallate ligands (H2gal2-), against Escherichia coli (E. coli) and Lactobacillus bacteria. Cu-GA was synthesized hydrothermally from copper salt and naturally derived gallic acid (H4gal) and characterized for antibacterial evaluation. The gradual breakdown of Cu(H2gal) resulted in a significant antibacterial effect that is due to the release of copper ions and gallate ligands from the framework. Both copper MOFs were nontoxic to bacteria at low concentrations and growth was completely inhibited at high concentrations when treated with Cu-BTC (1500 µg for E. coli and 1700 µg for Lactobacillus) and Cu-GA (2000 µg for both bacterial strains). Furthermore, our agarose gel electrophoresis results indicate that both MOFs could disrupt bacterial cell membranes, hindering the synthesis of DNA. These findings confirm the antibacterial properties of Cu-BTC and the successful internalization of Cu2+ ions and gallic acid by bacteria from the Cu-GA MOF framework, suggesting the potential for a sustained and effective therapeutic approach against pathogenic microorganisms.

Immobilization of Cyclodextrin glycosyltransferase onto three dimensional- hydrophobic and two dimensional- hydrophilic supports: A comparative study.

Cyclodextrin glycosyltransferase (CGTase) degrades starch into cyclodextrin via enzymatic activity. In this study, we immobilize CGTase from Thermoanaerobacter sp. on two supports, namely graphene nanoplatelets (GNP) consisting of short stacks of graphene nanoparticles and a calcium-based two-dimensional metal organic framework (Ca-TMA). The uptakes of CGTase on GNP and Ca-TMA reached 40 and 21 mg g-1 respectively, but immobilized CGTase on Ca-TMA showed a higher specific activity (38 U mg-1 ) than that on GNP (28 U mg-1 ). Analysis of secondary structures of CGTase, shows that immobilization reduces the proportion of ß-sheets in CGTase from 56% in the free to 49% and 51.3% for GNP and Ca-TMA respectively, α-helix from 38.5% to 18.1 and 37.5%, but led to increased ß-turns from 5.5 to 40% and 11.2% for GNP and Ca-TMA, respectively. Lower levels of conformational changes were observed over the more hydrophilic Ca-TMA compared to hydrophobic GNP, resulting in its better activity. Increased ß-turns were found to correlate with lower ß-CD production, while more ß-sheets and α-helix favored more ß-CD. Reusability studies revealed that GNP retains up to 74% of initial CGTase activity, while Ca-TMA dropped to 33% after eight consecutive uses. The results obtained in this work provide insight on the effect of support's surface properties on CGTase performance and can assist in developing robust CGTase-based biocatalysts for industrial application.

Bismuth-Based Metal-Organic Framework as a Chemiresistive Sensor for Acetone Gas Detection.

Analyzing acetone in the exhaled breath as a biomarker has proved to be a non-invasive method to detect diabetes in humans with good accuracy. In this work, a Bi-gallate MOF doped into a chitosan (CS) matrix containing an ionic liquid (IL) was fabricated to detect acetone gas with a low detection limit of 10 ppm at an operating temperature of 60 °C and 5 V operating bias. The sensor recorded the highest response to acetone in comparison to other test gases, proving its high selectivity along with long-term stability and repeatability. The sensor also exhibited ultra-fast response and recovery times of 15 ± 0.25 s and 3 ± 0.1 s, respectively. Moreover, the sensor membrane also exhibited flexibility and ease of fabrication, making it ideal to be employed as a real-time breath analyzer.

Cobalt Hydrogen-Bonded Organic Framework as a Visible Light-Driven Photocatalyst for CO2 Cycloaddition Reaction.

A novel cobalt hydrogen-bonded organic framework (Co-HOF, C24H14CoN4O8) was synthesized from a mixed linker, that is, 2,5-pyridinedicarboxylic acid (PDC) and 2,2'-bipyridyl (BPY) linkers and cobalt ion through a simple, one-pot, low-cost, and scalable solvothermal method. The Co-HOF was fully characterized using several analytical and spectroscopic techniques including single-crystal X-ray diffraction, diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray, and X-ray photoelectron spectroscopy. The Co-HOF exhibits high thermal and chemical stabilities compared to previously reported HOF materials. Moreover, Co-HOF shows excellent photocatalytic activity under visible light irradiation due to its narrow band gap of 2.05 eV. The cycloaddition reaction of CO2 to variable epoxides was investigated to evaluate the photocatalytic performance of Co-HOF under visible light radiation and was found to produce the corresponding cyclic carbonates in yields up to 99.9%.

First Exclusive Stereo- and Regioselective Preparation of 5-Arylimino-1,3,4-Selenadiazole Derivatives: Synthesis, NMR analysis, and Computational Studies.

Isoselenocyanates are valuable coupling partners required for preparing key chemical intermediates and biologically active molecules in an accelerated and effective way. Likewise, (Z)-2-oxo-N-phenylpropanehydrazonoyl chlorides have been employed in numerous one-step heteroannulation reactions to assemble the structural core of several various kinds of heterocyclic compounds. Here, we describe the inverse electron demand 1,3-dipolar cycloaddition reaction of isoselenocyanates with a variety of substituted (Z)-2-oxo-N-phenylpropanehydrazonoyl chlorides to generate, regioselectively and stereoselectively, a series of 5-arylimino-1,3,4-selenadiazole derivatives comprising a multitude of functional groups on both aryl rings. The synthetic method features gentle room-temperature conditions, wide substrate scope, and good to high reaction yields. The selenadiazoles were separated by gravity filtration in all instances and chemical structures were validated by multinuclear NMR spectroscopy and high accuracy mass spectral measurements. First conclusive molecular structure elucidation of the observed 5-arylimino-selenadiazole regioisomer was verified by single-crystal X-ray diffraction analysis. Crystal-structure measurement was successfully carried out on (Z)-1-(4-(4-iodophenyl)-5-(p-tolylimino)-4,5-dihydro-1,3,4-selenadiazol-2-yl)ethan-1-one and (Z)-1-(5-((4-methoxyphenyl)imino)-4-(4-(methylthio)phenyl)-4,5-dihydro-1,3,4-selenadiazol-2-yl)ethan-1-one. Likewise, the (Z)-geometry of the hydrazonoyl chloride reactant was proven by X-ray diffraction studies. As representative examples, crystal-structure determination was carried out on (Z)-2-oxo-N-phenylpropanehydrazonoyl chloride and (Z)-N-(3,5-bis(trifluoromethyl)phenyl)-2-oxopropanehydrazonoyl chloride. Density functional theory calculations at the B3LYP-D4/def2-TZVP level were conducted to support the noted experimental findings and suggested mechanism.

Lanthanide(III) (Er/Ho) coordination polymers for a photocatalytic CO2 cycloaddition reaction.

Two new isostructural carboxylate-bridged lanthanide ribbons having the chemical formula [Ln2(4-ABA)6]n [4-ABA = 4-aminobenzoate, Ln: holmium (Ho) and erbium (Er)] were synthesized by a solvothermal method and fully characterized using multiple analytical, spectroscopic, and computational techniques. Single-crystal X-ray diffraction analysis reveals that both lanthanide coordination polymers (Ln-CPs) exhibit linear ribbon-like structures built up by dinuclear Ln2(4-ABA)6 units and bridged by carboxylate groups. Ln-CPs showed remarkably high thermal and chemical stabilities. Ho-CP and Er-CP exhibited similar band gaps of 3.21 eV and 3.22 eV, respectively, showing their photocatalytic ability under UV light. The photocatalytic activities of Ln-CPs were examined in the CO2 cycloaddition of epoxides to cyclic carbonates under solvent-free conditions, and full conversion (yields up to 99.9%) to the product was achieved. Ln-CP photocatalysts retained the same product yields over five consecutive cycles. Additionally, the experimental magnetic studies indicated that both Ln-CP crystals are antiferromagnetic at low T, which is confirmed by density functional theory calculations.

Enhancing Hydrogen Sulfide Detection at Room Temperature Using ZIF-67-Chitosan Membrane.

Developing new materials for energy and environment-related applications is a critical research field. In this context, organic and metal-organic framework (MOF) materials are a promising solution for sensing hazardous gases and saving energy. Herein, a flexible membrane of the zeolitic imidazole framework (ZIF-67) mixed with a conductivity-controlled chitosan polymer was fabricated for detecting hydrogen sulfide (H2S) gas at room temperature (RT). The developed sensing device remarkably enhances the detection signal of 15 ppm of H2S gas at RT (23 °C). The response recorded is significantly higher than previously reported values. The optimization of the membrane doping percentage achieved exemplary results with respect to long-term stability, repeatability, and selectivity of the target gas among an array of several gases. The fabricated gas sensor has a fast response and a recovery time of 39 s and 142 s, respectively, for 15 ppm of H2S gas at RT. While the developed sensing device operates at RT and uses low bias voltage (0.5 V), the requirement for an additional heating element has been eliminated and the necessity for external energy is minimized. These novel features of the developed sensing device could be utilized for the real-time detection of harmful gases for a healthy and clean environment.

First X-ray Crystal Structure Characterization, Computational Studies, and Improved Synthetic Route to the Bioactive 5-Arylimino-1,3,4-thiadiazole Derivatives.

N-arylcyanothioformamides are useful coupling components for building key chemical intermediates and biologically active molecules in an expedited and efficient manner. Similarly, substituted (Z)-2-oxo-N-phenylpropanehydrazonoyl chlorides have been utilized in numerous one-step heteroannulation reactions to assemble the structural core of several different types of heterocyclic compounds. Herein, we demonstrate the effectiveness of the reaction of N-arylcyanothioformamides with various substituted (Z)-2-oxo-N-phenylpropanehydrazonoyl chlorides to produce, stereoselectively and regioselectively, a range of 5-arylimino-1,3,4-thiadiazole derivatives decorated with a multitude of functional groups on both aromatic rings. The synthetic methodology features mild room-temperature conditions, large substrate scope, wide array of functional groups on both reactants, and good to high reaction yields. The products were isolated by gravity filtration in all cases and structures were confirmed by multinuclear NMR spectroscopy and high accuracy mass spectral analysis. Proof of molecular structure of the isolated 5-arylimino-1,3,4-thiadiazole regioisomer was obtained for the first time by single-crystal X-ray diffraction analysis. Crystal-structure determination was carried out on (Z)-1-(5-((3-fluorophenyl)imino)-4-(4-iodophenyl)-4,5-dihydro-1,3,4-thiadiazol-2-yl)ethan-1-one and (Z)-1-(4-phenyl-5-(p-tolylimino)-4,5-dihydro-1,3,4-thiadiazol-2-yl)ethan-1-one. Similarly, the tautomeric structures of the N-arylcyanothioformamides and (Z)-geometries of the 2-oxo-N-phenylpropanehydrazonoyl chloride coupling partners were proven by X-ray diffraction studies. As representative examples, crystal-structure determination was carried out on (4-ethoxyphenyl)carbamothioyl cyanide and (Z)-N-(2,3-difluorophenyl)-2-oxopropanehydrazonoyl chloride. Density functional theory calculations at the B3LYP-D4/def2-TZVP level were carried out to rationalize the observed experimental findings.

A new mode of luminescence in lanthanide oxalates metal-organic frameworks.

Two lanthanide metal-organic frameworks [Ln-MOFs, Ln = Eu(III), Tb(III)] composed of oxalic acid and Ln building units were hydrothermally synthesized and fully characterized by powder X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Furthermore, their magnetic susceptibility measurements were obtained using SQUID based vibrating sample magnetometer (MPMS 3, Quantum Design). Both Ln-MOFs exhibited highly efficient luminescent property. Solid-state photoluminescence (PL) measurements revealed phosphorescence emission bands of Eu-MOF and Tb-MOF centered at 618 nm (red emission) and 550 nm (green emission) upon excitation at 396 nm and 285 nm, respectively. Eu-MOF and Tb-MOF displayed a phosphorescence quantum yield of 53% and 40%, respectively. Time-resolved PL analyses showed very long lifetime values, at 600 and 1065 ± 1 µs for Eu-MOF and Tb-MOF, respectively. Calculations performed by density functional theory indicated a charge transfer form metal centres to the ligand which was in good agreement with the experimental studies. Therefore, this new mode of highly photoluminescent MOF materials is studied for the first time which paves the way for better understanding of these systems for potential applications.

Temperature Control of Yellow Photoluminescence from SiO2-Coated ZnO Nanocrystals.

In this study, we aimed to elucidate the effects of temperature on the photoluminescence from ZnO-SiO2 nanocomposite and to describe the preparation of SiO2-coated ZnO nanocrystals using a chemical precipitation method, as confirmed by Fourier transform infrared (FTIR) and powder X-ray diffraction analysis (XRD) techniques. Analyses using high-resolution transmission microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), and electrophoretic light scattering (ELS) techniques showed that the new nanocomposite has an average size of 70 nm and 90% silica. Diffuse reflectance spectroscopy (DRS), photoluminescence (PL), and photoluminescence-excitation (PLE) measurements at different temperatures revealed two emission bands at 385 and 590 nm when the nanomaterials were excited at 325 nm. The UV and yellow emission bands were attributed to the radiative recombination and surface defects. The variable-temperature, time-resolved photoluminescence (VT-TRPL) measurements in the presence of SiO2 revealed the increase in the exciton lifetime values and the interplay of the thermally induced nonradiative recombination transfer of the excited-state population of the yellow emission via deep centers (DC). The results pave the way for more applications in photocatalysis and biomedical technology.

Visible-Light-Driven Photocatalytic Coupling of Neat Benzylamine over a Bi-Ellagate Metal-Organic Framework.

Selective aerobic oxidation of benzylamine to N,N-benzylidenebenzylamine was achieved using a bismuth ellagate (Bi-ellagate) metal-organic framework (MOF) under simulated visible light irradiation. The bismuth ellagate photocatalyst was characterized using several spectroscopic techniques: powder X-ray diffraction (PXRD), diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and nitrogen sorption measurements. Product formation was confirmed using 1H-NMR, 13C-NMR, and FTIR. The photocatalytic performance of Bi-ellagate was studied for the first time, which exhibits a band gap value of 2.62 eV, endowing it with a high photocatalytic activity under visible light irradiation. The reaction product, N,N-benzylidenebenzylamine, was selectively obtained with a high conversion yield of ∼96% under solvent-free conditions compared to other control experiments. The Bi-ellagate photocatalyst was recovered and reused four times without any significant loss in its activity, which provides an eco-friendly, low-cost, recyclable, and efficient photocatalyst for potential photocatalytic applications.

Metal-organic frameworks for advanced transducer based gas sensors: review and perspectives.

The development of gas sensing devices to detect environmentally toxic, hazardous, and volatile organic compounds (VOCs) has witnessed a surge of immense interest over the past few decades, motivated mainly by the significant progress in technological advancements in the gas sensing field. A great deal of research has been dedicated to developing robust, cost-effective, and miniaturized gas sensing platforms with high efficiency. Compared to conventional metal-oxide based gas sensing materials, metal-organic frameworks (MOFs) have garnered tremendous attention in a variety of fields, including the gas sensing field, due to their fascinating features such as high adsorption sites for gas molecules, high porosity, tunable morphologies, structural diversities, and ability of room temperature (RT) sensing. This review summarizes the current advancement in various pristine MOF materials and their composites for different electrical transducer-based gas sensing applications. The review begins with a discussion on the overview of gas sensors, the significance of MOFs, and their scope in the gas sensing field. Next, gas sensing applications are divided into four categories based on different advanced transducers: chemiresistive, capacitive, quartz crystal microbalance (QCM), and organic field-effect transistor (OFET) based gas sensors. Their fundamental concepts, gas sensing ability towards various gases, sensing mechanisms, and their advantages and disadvantages are discussed. Finally, this review is concluded with a summary, existing challenges, and future perspectives.

Iodine-DMSO mediated conversion of N-arylcyanothioformamides to N-arylcyanoformamides and the unexpected formation of 2-cyanobenzothiazoles.

Cyanoformamides are ubiquitous as useful components for assembling key intermediates and bioactive molecules. The development of an efficient and simple approach to this motif is a challenge. Herein, we demonstrate the effectiveness of the I2-DMSO oxidative system in the preparation of N-arylcyanoformamides from N-arylcyanothioformamides. The synthetic method features mild conditions, broad substrate scope, and high reaction efficiency. Furthermore, this method provides an excellent entry to exclusively afford 2-cyanobenzothiazoles which are useful substrates to access new luciferin analogs. The structures of all new products were elucidated by multinuclear NMR spectroscopy and high accuracy mass spectral analysis. Crystal-structure determination by means of single-crystal X-ray diffraction was carried out on (4-bromophenyl)carbamoyl cyanide, 5,6-dimethoxybenzo[d]thiazole-2-carbonitrile, 5-(benzyloxy)benzo[d]oxazole-2-carbonitrile, 4,7-dimethoxybenzo[d]thiazole-2-carbonitrile, and (5-iodo-2,4-dimethoxyphenyl)carbamoyl cyanide, a key intermediate with mechanistic implications.

Hexagonal Layer Manganese Metal-Organic Framework for Photocatalytic CO2 Cycloaddition Reaction.

A novel manganese metal-organic framework (Mn-MOF) termed UAEU-50 assembled from a benzenedicarboxylate linker (BDC) and trinuclear manganese clusters was synthesized and fully characterized using different spectroscopic and analytic techniques (e.g., X-ray powder diffraction, UV-vis diffuse reflectance spectroscopy, thermogravimetric analysis, scanning electron microscopy, and energy-dispersive X-ray spectroscopy). UAEU-50 adopted a hexagonal layer structure and exhibited superior thermal stability and robust chemical stability. Photocatalytic activities of UAEU-50 were investigated using the cycloaddition of CO2 to different epoxides, forming cyclic carbonates. Impressively, UAEU-50 can transform up to 90% photocatalytic CO2 conversion to cyclic carbonates in the visible-light region at ambient conditions.

Flexible Cu3(HHTP)2 MOF Membranes for Gas Sensing Application at Room Temperature.

Mixed matrix membranes (MMMs), possessing high porosity, have received extensive attention for gas sensing applications. However, those with high flexibility and significant sensitivity are rare. In this work, we report on the fabrication of a novel membrane, using Cu3(HHTP)2 MOF (Cu-MOF) embedded in a polymer matrix. A solution comprising a homogenous suspension of poly-vinyl alcohol (PVA) and ionic liquid (IL), and Cu-MOF solid particles, was cast onto a petri dish to obtain a flexible membrane (215 µm in thickness). The sensor membrane (Cu-MOF/PVA/IL), characterized for its structure and morphology, was assessed for its performance in sensing against various test gases. A detection limit of 1 ppm at 23 °C (room temperature) for H2S was achieved, with a response time of 12 s. Moreover, (Cu-MOF/PVA/IL) sensor exhibited excellent repeatability, long-term stability, and selectivity towards H2S gas. The other characteristics of the (Cu-MOF/PVA/IL) sensor include high flexibility, low cost, low-power consumption, and easy fabrication technique, which nominate this sensor as a potential candidate for use in practical industrial applications.

Challenges and Recent Advances in Enzyme-Mediated Wastewater Remediation-A Review.

Different classes of artificial pollutants, collectively called emerging pollutants, are detected in various water bodies, including lakes, rivers, and seas. Multiple studies have shown the devastating effects these emerging pollutants can have on human and aquatic life. The main reason for these emerging pollutants in the aquatic environment is their incomplete removal in the existing wastewater treatment plants (WWTPs). Several additional treatments that could potentially supplement existing WWTPs to eliminate these pollutants include a range of physicochemical and biological methods. The use of enzymes, specifically, oxidoreductases, are increasingly being studied for their ability to degrade different classes of organic compounds. These enzymes have been immobilized on different supports to promote their adoption as a cost-effective and recyclable remediation approach. Unfortunately, some of these techniques have shown a negative effect on the enzyme, including denaturation and loss of catalytic activity. This review focuses on the major challenges facing researchers working on the immobilization of peroxidases and the recent progress that has been made in this area. It focuses on four major areas: (1) stability of enzymes upon immobilization, enzyme engineering, and evolution; (2) recyclability and reusability, including immobilization on membranes and solid supports; (3) cost associated with enzyme-based remediation; and (4) scaling-up and bioreactors.

A Highly Sensitive and Flexible Metal-Organic Framework Polymer-Based H2S Gas Sensor.

We report the fabrication of a novel metal-organic framework (MOF)-polymer mixed-matrix flexible membrane for the detection of hydrogen sulfide (H2S) gas at room temperature. This high-performance gas sensor is based on MOF-5 microparticles embedded on a conductivity-controlled chitosan (CS) organic membrane. The conductivity of the organic membrane is controlled by blending it with a glycerol ionic liquid (IL) at different concentrations. The sensor showed a remarkable detection sensitivity for H2S gas at a concentrations level as low as 1 ppm at room temperature. The MOF-5/CS/IL gas sensor demonstrates a highly desirable detection selectivity, fast response time (<8 s), recovery time of less than 30 s, and outstanding sensing stability averaging at 97% detection with 50 ppm of H2S gas. This composite having high sensitivity, low-power consumption, and flexibility holds great promise for addressing current challenges pertinent to environmental sustainability.

Photocatalytic reduction of 4-nitroaniline in aqueous solution using BiOCl/BiOBr/rGO ternary heterojunction under simulated UV-visible light irradiation.

BiOCl/BiOBr/rGO ternary heterojunctions were synthesized and characterized, and their photocatalytic activities were examined. Three different rGO mass ratios were incorporated into BiOCl75%BiOBr25%; 1% rGO, 3% rGO, and 5% rGO, respectively. The successful incorporation of rGO into the composites was confirmed using powder X-ray diffraction (PXRD). Furthermore, calculated band gap, elemental composition, and composites' morphology were investigated using UV-visible (UV-Vis) diffuse reflectance spectroscopy (DRS), energy-dispersive X-ray spectroscopy (EDX), and scanning electron microscopy (SEM), respectively. The photocatalytic activities of the ternary heterojunctions were evaluated toward the photocatalytic reduction of 4-nitroaniline (4-NA) in aqueous solution. Experimental results reveal that rGO incorporation enhances the activity of the prepared heterojunction photocatalysts, where photocatalyst containing 5% rGO exhibited the highest activity achieving rate of 0.84 min-1.

Enzyme-Loaded Flower-Shaped Nanomaterials: A Versatile Platform with Biosensing, Biocatalytic, and Environmental Promise.

As a result of their unique structural and multifunctional characteristics, organic-inorganic hybrid nanoflowers (hNFs), a newly developed class of flower-like, well-structured and well-oriented materials has gained significant attention. The structural attributes along with the surface-engineered functional entities of hNFs, e.g., their size, shape, surface orientation, structural integrity, stability under reactive environments, enzyme stabilizing capability, and organic-inorganic ratio, all significantly contribute to and determine their applications. Although hNFs are still in their infancy and in the early stage of robust development, the recent hike in biotechnology at large and nanotechnology in particular is making hNFs a versatile platform for constructing enzyme-loaded/immobilized structures for different applications. For instance, detection- and sensing-based applications, environmental- and sustainability-based applications, and biocatalytic and biotransformation applications are of supreme interest. Considering the above points, herein we reviewed current advances in multifunctional hNFs, with particular emphasis on (1) critical factors, (2) different metal/non-metal-based synthesizing processes (i.e., (i) copper-based hNFs, (ii) calcium-based hNFs, (iii) manganese-based hNFs, (iv) zinc-based hNFs, (v) cobalt-based hNFs, (vi) iron-based hNFs, (vii) multi-metal-based hNFs, and (viii) non-metal-based hNFs), and (3) their applications. Moreover, the interfacial mechanism involved in hNF development is also discussed considering the following three critical points: (1) the combination of metal ions and organic matter, (2) petal formation, and (3) the generation of hNFs. In summary, the literature given herein could be used to engineer hNFs for multipurpose applications in the biosensing, biocatalysis, and other environmental sectors.

Photocatalytic Activities of FeNbO4/NH2-MIL-125(Ti) Composites toward the Cycloaddition of CO2 to Propylene Oxide.

Photocatalytic utilization of CO2 in the production of value-added chemicals has presented a recent green alternative for CO2 fixation. In this regard, three FeNbO4/NH2-MIL-125(Ti) composites of different mole ratios were synthesized, characterized using Powder X-ray diffraction (PXRD), UV-vis diffuse reflectance spectroscopy (UV-Vis DRS), Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX). PXRD patterns confirm the co-existence of the parent components in the prepared composites. Moreover, the surface area increased as the mole percent of NH2-MIL-125(Ti) in the composites increased due to the large surface area of NH2-MIL-125(Ti). Prepared composites were investigated for the photocatalytic insertion of CO2 into propylene oxide. FeNbO4(75%)/NH2-MIL-125(Ti)(25%) showed the highest percent yield of 52% compared to the other two composites. Results demonstrate the cooperative mechanism between FeNbO4 and NH2-MIL-125(Ti) and that the reaction proceeded photocatalytically.