Effects of feeding an inoculated corn silage with or without a direct-fed microbial on dry matter intake, milk production, and nutrient digestibility of high-producing lactating Holstein cows.

This study evaluated the effects of inoculating corn silage and/or feeding a direct-fed microbial (PRO) on performance and nutrient digestibility of lactating dairy cows. At harvesting, corn silage was treated either with water (culated or not [CON]) or Lactococcus lactis and Lentilactobacillus buchneri (INC; SiloSolve FC) at 1.5 × 105 cfu/g of corn silage. Ten mini silos and one farm-scale silo bunker per treatment were prepared for the laboratory and the lactating dairy cow trial, respectively. Five mini silos per treatment were opened on days 2 or 90 post-ensiling for pH measurement, as well as chemical analysis and aerobic stability, respectively. The farm-scale silo bunkers were opened 77 d post-ensiling for the beginning of the lactating cow trial. Eighty lactating Holstein cows were assigned in a 2 × 2 factorial design to: (1) CON silage without PRO (CON-CON; n = 20), (2) CON silage with PRO at 14 g/head/d (CON-PRO; n = 20), (3) INC silage without PRO (INC-CON; n = 20), and (4) INC silage with PRO at 14 g/head/d (INC-PRO; n = 20). Concurrently with the feeding trial, eight cows per treatment were chosen for nutrient digestibility. The pH of the corn silage was not affected by the silage inoculant (P ≥ 0.29), but INC yielded greater concentration of acetic acid and longer aerobic stability (P < 0.01). Dairy cows fed INC had a lower mean total dry matter intake (DMI), milk protein content, and somatic cell counts vs. CON (P ≤ 0.02). On the other hand, milk and fat- and protein-corrected milk (FPCM) production efficiency, milk urea-N, DM, crude protein, and starch digestibility were greater for INC-fed cows (P ≤ 0.03). Feeding direct-fed microbials (DFM) improved mean body weight, milk yield, and FPCM, as well as milk protein and lactose yield (P ≤ 0.05), but reduced milk fat and protein content (P = 0.02). A silage inoculant × DFM interaction was observed for milk production efficiency, milk protein and lactose content, and somatic cell count (P ≤ 0.05). Dairy cows fed INC-CON had a greater milk production efficiency and milk lactose content (P ≤ 0.04), but INC-PRO had lower milk protein content and SCC (P ≤ 0.03). In summary, inoculating L. lactis and L. buchneri increased acetic acid content and aerobic stability of corn silage, reduced DMI, but improved milk production efficiency and nutrient digestibility of lactating Holstein dairy cows. On the other hand, feeding PRO improved milk, protein, and lactose yield. Additionally, combining the feeding of an inoculated corn silage with PRO reduced milk somatic cell count.

Effects of source and concentration of neutral detergent fiber from roughage in beef cattle diets: Comparison of methods to measure the effectiveness of fiber.

Methods have been developed to measure the effectiveness of many roughages, but few evaluations have been conducted with tropical feeds. The objectives of this research were to determine the effectiveness of roughage sources based on bioassay and laboratory methods and identify the biological attributes of the diets that correlate with these methods. Six ruminally cannulated Nellore steers (408 ± 12 kg of BW) were randomly assigned to a 6 × 6 Latin square design within six diets: negative control diet (NC) with aNDF as 10% from corn silage (CS); positive control diet (PC) with aNDF as 20% from CS; and four diets containing 10% aNDF from CS and 10% aNDF from each of the following sources: sugarcane (SC), sugarcane bagasse (SCB), soybean hulls (SH), or low oil cottonseed hulls (LOCH). Physical effectiveness factor (pef, related to the physical characteristics of aNDF) and effectiveness factor (ef, related to the ruminal pH) were determined based on a linear model approach that uses a bioassay method in which CS aNDF was assumed to be the standard fiber source. Laboratory methods to estimate pef of roughage sources were based on the proportion of DM of roughage retained on a 1.18-mm sieve pef(>1.18 mm) or retained on the 8.0-mm Penn State Particle Separator screen pef(>8.0 mm). The pef calculated by the bioassay method (total chewing time and ruminal mat resistance) for CS, SCB, and SC were higher values (P < 0.05) compared with SH and LOCH. The pef(rumen mat) of SC and SCB were higher (P < 0.05) than that of CS, SH, and LOCH. The pef(rumen mat) of LOCH was 61% higher than SH. The ef(rumen pH) of SC and LOCH was higher (P < 0.05) than CS and SH. The pef(chewing, min/d), pef(chewing, min/kg of DM), pef(rumen mat), and ef(rumen pH) positively correlated with rumination time, total chewing time, and ruminal mat resistance (values from transit time in seconds). No correlation was observed (P > 0.05) between pef(>8.0 mm) and rumination time, chewing time, and ruminal pH. The pef calculated using the bioassay method as well as pef (>8.0 mm) were negatively correlated with rumen pH (P > 0.05). The values of the effectiveness of fiber sources obtained in this research can be used as a guideline for nutritionists aiming to replace roughage sources from tropical regions in beef cattle finishing diets. Under our conditions, the pef using the bioassay method or laboratory methods were not adequate in predicting ruminal pH.

Effects of source and concentration of neutral detergent fiber from roughage in beef cattle diets on feed intake, ingestive behavior, and ruminal kinetics.

The objectives of this research were to evaluate the effects of source and concentration of α-amylase-treated neutral detergent fiber (aNDF) from roughage on feed intake, ingestive behavior, and ruminal kinetics in beef cattle receiving high-concentrate diets. Six ruminally cannulated Nellore steers (408 ± 12 kg of body weight) were randomly assigned to a 6 × 6 Latin square design with six diets: 10% aNDF from corn silage (10CS); 20% aNDF from corn silage (20CS); or four diets containing 10% aNDF from corn silage and 10% aNDF from one of the following sources: sugarcane (SC), sugarcane bagasse (SCB), soybean hulls (SH), or low oil cottonseed hulls (LOCH). The parameters of passage and degradation kinetics were estimated based on a two-compartmental model with gamma- and exponential-distributed residence times. The nonlinear models were fitted by nonlinear least squares, and a linear mixed-effects model was fitted to all variables measured from the Latin square design that were related to intake, digestibility, digestion kinetic parameters, and residence times. Mean particle size (MPS) between roughage sources (CS, SCB, and SC) and coproducts (SH and LOCH) was affected (P < 0.05). Dry matter intake (DMI) was not affected (P > 0.05) by 20CS, SC, SH, or LOCH. Steers fed 20CS or LOCH diets had 16% and 20% greater DMI, respectively, (P < 0.05) than steers fed 10CS diet. Steers fed SCB consumed the least dry matter (DM). The SH and LOCH diets had lower MPS values (about 8.77 mm) in comparison to 20CS, SCB, and SC diets (about 13.08 mm) and, consequently, affected (P < 0.05) rumen content, ruminal in situ disappearance, nutrient digestibility, and solid fractional passage rate. Chewing time was affected (P < 0.05) by roughage sources and concentration. Lower values of distance travel inside the rumen (min/cm) were observed (P < 0.05) for the SCB and SC diets in comparison with any other diet. Except for SCB, there was no difference (P > 0.05) in rumen fill, among other treatments. Mean daily ruminal pH was not affected (P > 0.05) by 20CS, SCB, SC, and LOCH diets, and it ranged from 6.1 to 6.23. Total short-chain fatty acids concentration was affected (P < 0.05) by roughage source and concentration. Based on our results, we recommend that under Brazilian finishing diets, replacing roughage sources, except for SCB, based on aNDF concentration of the roughage in high-concentrate diets containing finely ground flint corn does not affect DMI.