RESUMO
A method is proposed for choosing unit cells for a group of crystals so that they all appear as nearly similar as possible to a selected cell. Related unit cells with varying cell parameters or indexed with different lattice centering can be accommodated.
RESUMO
Characterization of crystallographic lattices is an important tool in structure solution, crystallographic database searches and clustering of diffraction images in serial crystallography. Characterization of lattices by Niggli-reduced cells (based on the three shortest non-coplanar lattice vectors) or by Delaunay-reduced cells (based on four non-coplanar vectors summing to zero and all meeting at obtuse or right angles) is commonly performed. The Niggli cell derives from Minkowski reduction. The Delaunay cell derives from Selling reduction. All are related to the Wigner-Seitz (or Dirichlet, or Voronoi) cell of the lattice, which consists of the points at least as close to a chosen lattice point as they are to any other lattice point. The three non-coplanar lattice vectors chosen are here called the Niggli-reduced cell edges. Starting from a Niggli-reduced cell, the Dirichlet cell is characterized by the planes determined by 13 lattice half-edges: the midpoints of the three Niggli cell edges, the six Niggli cell face-diagonals and the four body-diagonals, but seven of the lengths are sufficient: three edge lengths, the three shorter of each pair of face-diagonal lengths, and the shortest body-diagonal length. These seven are sufficient to recover the Niggli-reduced cell.
RESUMO
Methods of generating random unit-cell data for testing software are discussed. Working within the space S 6 appears to be the most expeditious.
RESUMO
KAMO and BLEND provide particularly effective tools to automatically manage the merging of large numbers of data sets from serial crystallography. The requirement for manual intervention in the process can be reduced by extending BLEND to support additional clustering options such as the use of more accurate cell distance metrics and the use of reflection-intensity correlation coefficients to infer `distances' among sets of reflections. This increases the sensitivity to differences in unit-cell parameters and allows clustering to assemble nearly complete data sets on the basis of intensity or amplitude differences. If the data sets are already sufficiently complete to permit it, one applies KAMO once and clusters the data using intensities only. When starting from incomplete data sets, one applies KAMO twice, first using unit-cell parameters. In this step, either the simple cell vector distance of the original BLEND or the more sensitive NCDist is used. This step tends to find clusters of sufficient size such that, when merged, each cluster is sufficiently complete to allow reflection intensities or amplitudes to be compared. One then uses KAMO again using the correlation between reflections with a common hkl to merge clusters in a way that is sensitive to structural differences that may not have perturbed the unit-cell parameters sufficiently to make meaningful clusters. Many groups have developed effective clustering algorithms that use a measurable physical parameter from each diffraction still or wedge to cluster the data into categories which then can be merged, one hopes, to yield the electron density from a single protein form. Since these physical parameters are often largely independent of one another, it should be possible to greatly improve the efficacy of data-clustering software by using a multi-stage partitioning strategy. Here, one possible approach to multi-stage data clustering is demonstrated. The strategy is to use unit-cell clustering until the merged data are sufficiently complete and then to use intensity-based clustering. Using this strategy, it is demonstrated that it is possible to accurately cluster data sets from crystals that have subtle differences.
Assuntos
Algoritmos , Software , Análise por Conglomerados , Cristalografia por Raios X , Proteínas/químicaRESUMO
One often observes small but measurable differences in the diffraction data measured from different crystals of a single protein. These differences might reflect structural differences in the protein and may reveal the natural dynamism of the molecule in solution. Partitioning these mixed-state data into single-state clusters is a critical step that could extract information about the dynamic behavior of proteins from hundreds or thousands of single-crystal data sets. Mixed-state data can be obtained deliberately (through intentional perturbation) or inadvertently (while attempting to measure highly redundant single-crystal data). To the extent that different states adopt different molecular structures, one expects to observe differences in the crystals; each of the polystates will create a polymorph of the crystals. After mixed-state diffraction data have been measured, deliberately or inadvertently, the challenge is to sort the data into clusters that may represent relevant biological polystates. Here, this problem is addressed using a simple multi-factor clustering approach that classifies each data set using independent observables, thereby assigning each data set to the correct location in conformational space. This procedure is illustrated using two independent observables, unit-cell parameters and intensities, to cluster mixed-state data from chymotrypsinogen (ChTg) crystals. It is observed that the data populate an arc of the reaction trajectory as ChTg is converted into chymotrypsin.
Assuntos
Proteínas , Modelos Moleculares , Conformação Molecular , Estrutura MolecularRESUMO
The transformations from the primitive cells of the centered Bravais lattices to the corresponding centered cells have conventionally been listed as three-by-three matrices that transform three-space lattice vectors. Using those three-by-three matrices when working in the six-dimensional space of lattices represented as Selling scalars as used in Delone (Delaunay) reduction, one could transform to the three-space representation, apply the three-by-three matrices and then back-transform to the six-space representation, but it is much simpler to have the equivalent six-by-six matrices and apply them directly. The general form of the transformation from the three-space matrix to the corresponding matrix operating on Selling scalars (expressed in space S6) is derived, and the particular S6matrices for the centered Delone types are listed. (Note: in his later publications, Boris Delaunay used the Russian version of his surname, Delone.).
RESUMO
In macromolecular crystallography, higher flux, smaller beams, and faster detectors open the door to experiments with very large numbers of very small samples that can reveal polymorphs and dynamics but require re-engineering of approaches to the clustering of images both at synchrotrons and XFELs (X-ray free electron lasers). The need for the management of orders of magnitude more images and limitations of file systems favor a transition from simple one-file-per-image systems such as CBF to image container systems such as HDF5. This further increases the load on computers and networks and requires a re-examination of the presentation of metadata. In this paper, we discuss three important components of this problem-improved approaches to the clustering of images to better support experiments on polymorphs and dynamics, recent and upcoming changes in metadata for Eiger images, and software to rapidly validate images in the revised Eiger format.
RESUMO
Algorithms for quantifying the differences between two lattices are used for Bravais lattice determination, database lookup for unit cells to select candidates for molecular replacement, and recently for clustering to group together images from serial crystallography. It is particularly desirable for the differences between lattices to be computed as a perturbation-stable metric, i.e. as distances that satisfy the triangle inequality, so that standard tree-based nearest-neighbor algorithms can be used, and for which small changes in the lattices involved produce small changes in the distances computed. A perturbation-stable metric space related to the reduction algorithm of Selling and to the Bravais lattice determination methods of Delone is described. Two ways of representing the space, as six-dimensional real vectors or equivalently as three-dimensional complex vectors, are presented and applications of these metrics are discussed. (Note: in his later publications, Boris Delaunay used the Russian version of his surname, Delone.).
RESUMO
The unit-cell reduction described by Selling and used by Delone (whose early publications were under the spelling Delaunay) is explained in a simple form. The transformations needed to implement the reduction are listed. The simplicity of this reduction contrasts with the complexity of Niggli reduction.
RESUMO
Many problems in crystallography and other fields can be treated as nearest-neighbor problems. The neartree data structure provides a flexible way to organize and retrieve metric data. In some cases, it can provide near-optimal performance. NearTree is a software tool that constructs neartrees and provides a number of different query tools.
RESUMO
Ambiguities in the article by Andrews & Bernstein [J. Appl. Cryst. (2014), 47, 346-359] are clarified.[This corrects the article DOI: 10.1107/S1600576713031002.].
RESUMO
Niggli reduction can be viewed as a series of operations in a six-dimensional space derived from the metric tensor. An implicit embedding of the space of Niggli-reduced cells in a higher-dimensional space to facilitate calculation of distances between cells is described. This distance metric is used to create a program, BGAOL, for Bravais lattice determination. Results from BGAOL are compared with results from other metric based Bravais lattice determination algorithms. This embedding depends on understanding the boundary polytopes of the Niggli-reduced cone N in the six-dimensional space G6. This article describes an investigation of the boundary polytopes of the Niggli-reduced cone N in the six-dimensional space G6 by algebraic analysis and organized random probing of regions near one-, two-, three-, four-, five-, six-, seven- and eightfold boundary polytope intersections. The discussion of valid boundary polytopes is limited to those avoiding the mathematically interesting but crystallographically impossible cases of zero-length cell edges. Combinations of boundary polytopes without a valid intersection in the closure of the Niggli cone or with an intersection that would force a cell edge to zero or without neighboring probe points are eliminated. In all, 216 boundary polytopes are found. There are 15 five-dimensional boundary polytopes of the full G6 Niggli cone N .
RESUMO
A database of lattices using the G6 representation of the Niggli-reduced cell as the search key provides a more robust and complete search than older techniques. Searching is implemented by finding the distance from the probe cell to other cells using a topological embedding of the Niggli reduction in G6, so that all cells representing similar lattices will be found. The embedding provides the first fully linear measure of distances between unit cells. Comparison of results with those from older cell-based search algorithms suggests significant value in the new approach.