Ascorbic acid assisted photodegradation of methylcobalamin using corrective irrelevant absorption spectrophotometric assay: A kinetic study.

Photodegradation of drug substances leads to the formation of known and unknown degradation products. These unknown degradation products interfere and give erroneous results because of absorption on analytical wavelengths. This interference could be eliminated using the correction of irrelevant absorbancies. This study is based on the application of linear and non-linear correction of irrelevant absorption for the determination of methylcobalamin (MC) and hydroxocobalamin in the photolytic degradation assisted by ascorbic acid (AH2). MC follows first-order degradation kinetics and the rate of degradation (kobs) ranges from 1.99-2.34 × 10-2, min-1 at pH 2.0-12.0. The second-order rate constants (k2) for the photochemical interaction of MC and AH2 are in the range of 17.9-60.3 × 10-2 M-1, min-1 (acidic region) and 10.3-24.6 × 10-2 M-1, min-1 (alkaline region). The k2-pH profile was found to be bell-shaped and the maximum rate of degradation in the presence of AH2 is at pH 5.0 (60.3 × 10-2 M-1, min-1) due to the protonation of MC. However, in alkaline pH, the rate of photodegradation decreases due to the ionization form of AH2 which is AH- species.

Photolysis of tolfenamic acid in aqueous and organic solvents: a kinetic study.

Tolfenamic acid (TA) is a non-steroidal anti-inflammatory drug that was studied for its photodegradation in aqueous (pH 2.0-12.0) and organic solvents (acetonitrile, methanol, ethanol, 1-propanol, 1-butanol). TA follows first-order kinetics for its photodegradation, and the apparent first-order rate constants (k obs) are in the range of 0.65 (pH 12.0) to 6.94 × 10-2 (pH 3.0) min-1 in aqueous solution and 3.28 (1-butanol) to 7.69 × 10-4 (acetonitrile) min-1 in organic solvents. The rate-pH profile for TA photodegradation is an inverted V (∧) or V-top shape, indicating that the cationic form is more susceptible to acid hydrolysis than the anionic form of TA, which is less susceptible to alkaline hydrolysis. The fluorescence behavior of TA also exhibits a V-top-shaped curve, indicating maximum fluorescence intensity at pH 3.0. TA is highly stable at a pH range of 5.0-7.0, making it suitable for formulation development. In organic solvents, the photodegradation rate of TA increases with the solvent's dielectric constant and solvent acceptor number, indicating solute-solvent interactions. The values of k obs decreased with increased viscosity of the solvents due to diffusion-controlled processes. The correlation between k obs versus ionization potential and solvent density has also been established. A total of 17 photoproducts have been identified through LC-MS, of which nine have been reported for the first time. It has been confirmed through electron spin resonance (ESR) spectrometry that the excited singlet state of TA is converted into an excited triplet state through intersystem crossing, which results in an increased rate of photodegradation in acetonitrile.

Riboflavin (vitamin B2) sensitized photooxidation of ascorbic acid (vitamin C): A kinetic study.

Ascorbic acid (AH2) photoxidation sensitized by riboflavin (RF) has been studied between pH 2.0 and 12.0 in ambient air and anaerobic environment using UV and visible irradiation sources. The kinetics of AH2 degradation in aqueous medium along with RF is found to be first-order for its photodegradation. AH2 photolysis rate constants in aerobic and anaerobic conditions with RF (1.0-5.0 × 10-5 M) are 0.14-3.89 × 10-2 and 0.026-0.740 × 10-2 min-1, respectively. The rate constants (k2) of second-order kinetics for AH2 and RF photochemical interaction in aerobic and anaerobic conditions are in the range of 0.24-3.70 to 0.05-0.70 × 10-3 M-1 min-1, respectively, which manifests that increasing the RF concentration also increases the rate of photodegradation (photooxidation) of AH2. The k2 versus pH graph is bell-shaped which indicates that increasing the pH increases photolytic degradation rate of AH2 with RF. Increasing the pH results in the increased ionization of AH2 (ascorbyl anion, AH-) and redox potential which leads to the higher rates of photodegradation of AH2. Two-component spectrophotometric (243 and 266 nm, AH2 and RF, respectively) and high-performance liquid chromatography (HPLC) methods have been used to determine the concentration of AH2 and RF in pure and degraded solutions. The results obtained from these two methods are compared using a student t-test which showed no noteworthy difference between them.

Analysis of Tolfenamic Acid using a Simple, Rapid, and Stabilityindicating Validated HPLC Method.

BACKGROUND: Tolfenamic acid (TA) belongs to the fenamates class of non-steroidal anti-inflammatory drugs. Insufficient information is available regarding the availa-bility of a reliable and validated stability-indicating method for the assay of TA. OBJECTIVE: A relatively simple, rapid, accurate, precise, economical, robust, and stability-indicating RP-HPLC method has been developed to determine TA in pure and tablet dosage forms. METHODS: The method was validated according to the ICH guideline, and parameters like linearity, range, selectivity, accuracy, precision, robustness, specificity, and solution stability were determined. TLC and FTIR spectrometry were used to ascertain the purity of TA. The specificity was determined with known impurities and after performing forced degradation, while the robustness was established by Plackett-Burman's experimental design. The mobile phase used for the analysis was acetonitrile and water (90:10, v/v) at pH 2.5. The detection of the active drug was made at 280 nm using a C18 column (tR = 4.3 min.). The method's ap-plicability was also checked for the yellow polymorphic form of TA. RESULTS: The results indicated that the method is highly accurate (99.39-100.80%), precise (<1.5% RSD), robust (<2% RSD), and statistically comparable to the British Pharmacopoeia method with better sensitivity and specificity. CONCLUSION: It was observed that the stress degradation studies do not affect the method's accuracy and specificity. Hence the proposed method can be used to assay TA and its tablet dosage form.

Pharmaceutical based cosmetic serums.

The growth and demand for cosmeceuticals (cosmetic products that have medicinal or drug-like benefits) have been enhanced for the last few decades. Lately, the newly invented dosage form, i.e., the pharmaceutical-based cosmetic serum has been developed and widely employed in various non-invasive cosmetic procedures. Many pharmaceutical-based cosmetic serums contain natural active components that claim to have a medical or drug-like effect on the skin, hair, and nails, including anti-aging, anti-wrinkle, anti-acne, hydrating, moisturizing, repairing, brightening and lightening skin, anti-hair fall, anti-fungal, and nail growth effect, etc. In comparison with other pharmaceutical-related cosmetic products (creams, gels, foams, and lotions, etc.), pharmaceutical-based cosmetic serums produce more rapid and incredible effects on the skin. This chapter provides detailed knowledge about the different marketed pharmaceutical-based cosmetic serums and their several types such as facial serums, hair serums, nail serums, under the eye serum, lip serum, hand, and foot serum, respectively. Moreover, some valuable procedures have also been discussed which provide prolong effects with desired results in the minimum duration of time after the few sessions of the serum treatment.

5-Deazaalloxazine as photosensitizer of singlet oxygen and potential redox-sensitive agent.

Flavins are a unique class of compounds that combine the features of singlet oxygen generators and redox-dependent fluorophores. From a broad family of flavin derivatives, deazaalloxazines are significantly underdeveloped from the point of view of photophysical properties. Herein, we report photophysics of 5-deazaalloxazine (1a) in water, acetonitrile, and some other solvents. In particular, triplet excited states of 1a in water and in acetonitrile were investigated using ultraviolet-visible (UV-Vis) transient absorption spectroscopy. The measured triplet lifetimes for 1a were all on the microsecond time scale (≈ 60 µs) in deoxygenated solutions. The quantum yield of S1 → T1 intersystem crossing for 1a in water was 0.43 based on T1 energy transfer from 1a to indicaxanthin (5) acting as acceptor and on comparative actinometric measurements using benzophenone (6). 1a was an efficient photosensitizer for singlet oxygen in aerated solutions, with quantum yields of singlet oxygen in methanol of about 0.76, compared to acetonitrile ~ 0.74, dichloromethane ~ 0.64 and 1,2-dichloroethane ~ 0.54. Significantly lower singlet oxygen quantum yields were obtained in water and deuterated water (Ð¤Δ ~ 0.42 and 0.44, respectively). Human red blood cells (RBC) were used as a cell model to study the antioxidant capacity in vitro and cytotoxic activity of 1a. Fluorescence-lifetime imaging microscopy (FLIM) data were analyzed by fluorescence lifetime parameters and distribution for different parts of the emission spectrum. Comparison of multidimensional fluorescent properties of RBC under physiological-like and oxidative-stress conditions in the presence and absence of 1a suggests its dual activity as probe and singlet-oxygen generator and opens up a pathway for using FLIM to analyze complex intracellular behavior of flavin-like compounds. These new data on structure-property relationship contribute to the body of information required for a rational design of flavin-based tools for future biological and biochemical applications.

Navigating the liquid biopsy Minimal Residual Disease (MRD) in non-small cell lung cancer: Making the invisible visible.

Liquid biopsy has gained increasing interest in the growing era of precision medicine as minimally invasive technique. Recent findings demonstrated that detecting minimal or molecular residual disease (MRD) in NSCLC is a challenging matter of debate that need multidisciplinary competencies, avoiding the overtreatment risk along with achieving a significant survival improvement. This review aims to provide practical consideration for solving data interpretation questions about MRD in NSCLC thanks to the close cooperation between biologists and oncology clinicians. We discussed with a translational approach the critical point of view from benchside, bedside and bunchside to facilitate the future applicability of liquid biopsy in this setting. Herein, we defined the clinical significance of MRD, focusing on relevant practical consideration about advantages and disadvantages, speculating on future clinical trial design and standardization of MRD technology.

Nanosponges-based Drug Delivery System for the Cosmeceutical Applications of Stabilized Ascorbic Acid.

BACKGROUND: L-Ascorbic acid (AA) is a highly unstable compound, thus, limiting its use in pharmaceutical and cosmetic products, particularly at higher concentrations. OBJECTIVE: This study aimed to stabilize the highly sensitive molecule (AA) by encapsulating it in ß- cyclodextrin nanosponges (ß-CD NS) that can be used further in preparing cosmeceuticals products with higher AA concentrations and enhanced stability. METHODS: The NS has been synthesized by the melting method. The AA was encapsulated in ß-CD NS by the freeze-drying process. The prepared NS were characterized by FTIR spectrometry, SEM, Atomic Force Microscopy (AFM), zeta sizer, Differential Scanning Calorimetry (DSC), and the physical flow characteristics were also studied. The in vitro drug release was carried out on the Franz apparatus using a combination of two methods: sample & separate and dialysis membrane. The assay was performed using a validated spectrometric method. RESULTS: The entrapment efficiency of AA in ß-CD NS indicated a good loading capacity (83.57±6.35%). The FTIR, SEM, AFM, and DSC results confirmed the encapsulation of AA in ß-CD NS. The particle size, polydispersity index, and zeta potential results ascertained the formation of stabilized monodisperse nanoparticles. The physical flow characteristics showed good flow properties. Around 84% AA has been released from the NS in 4 h following the Korsmeyer-Peppas model. The AA-loaded NS remained stable for nine months when stored at 30±2°C/65±5% RH. CONCLUSION: It is concluded that the prepared NS can protect the highly sensitive AA from degradation and provide an extended-release of the vitamin. The prepared AA-loaded ß-CD NS can be used to formulate other cosmeceutical dosage forms with better stability and effect.

PROTACs: The Future of Leukemia Therapeutics.

The fight to find effective, long-lasting treatments for cancer has led many researchers to consider protein degrading entities. Recent developments in PROteolysis TArgeting Chimeras (PROTACs) have signified their potential as possible cancer therapies. PROTACs are small molecule, protein degraders that function by hijacking the built-in Ubiquitin-Proteasome pathway. This review mainly focuses on the general design and functioning of PROTACs as well as current advancements in the development of PROTACs as anticancer therapies. Particular emphasis is given to PROTACs designed against various types of Leukemia/Blood malignancies.

Screening Programs for Hearing Assessment in Newborns and Children.

Objective In this study, we aimed to assess the incidence of hearing loss in the pediatric population through otoacoustic emission (OAE) and brainstem evoked response audiometry (BERA) and to analyze the possible etiological factors responsible for it. Material and methods A retrospective observational study was conducted in the Otolaryngology (ENT) and Gynecology and Obstetrics Departments at the Jinnah Postgraduate Medical Centre and National Institute of Child Health in Karachi, Pakistan between July 2019 and October 2019. The convenient sampling technique was used to select the patients. The final sample size consisting of newborns and children was 108. Initially, screening procedures were undertaken for newborns to detect permanent or fluctuating, bilateral or unilateral, and sensory or conductive hearing loss, averaging 30-40 dB or more in the frequency region, which indicated potential issues related to speech recognition (approximately 500-4,000 Hz). The screening of newborns involved the use of non-invasive, objective physiologic measures that included OAEs and/or auditory brainstem response (ABR). The children with hearing impairment then underwent BERA; thereafter, further investigations were performed to confirm the defects found on BERA testing. Results Of the 108 cases, 96 had normal hearing on OAE screening, and 12 were found to have hearing loss on the OAE test. Further testing was carried out on BERA for 12 cases that had been detected to have hearing loss on OAE, and BERA showed normal hearing for five cases whereas seven were found to have hearing loss. Of the seven patients with hearing loss on the BERA test, five were diagnosed with cochlear deafness, and two had retrocochlear deafness. Conclusion Our present study concludes that in order to avoid any hearing problems in infants, OAE hearing screening and diagnostic BERA screening programs should be carried out in all the hospitals of Pakistan to assess newborn hearing at an early age.

Development and validation of a spectrofluorimetric method for the analysis of tolfenamic acid in pure and tablet dosage form.

Tolfenamic acid (TA) is commonly used in humans and animals because of its anti-inflammatory, antipyretic, and analgesic effects. So far, no study has been carried out to develop a validated spectrofluorimetric method for determination of TA. Therefore, the present study aimed to develop and validate a simple, accurate, rapid, economical, and precise spectrofluorimetric method to assay TA in its pure and dosage forms, and also in degraded solutions. The fluorimetric method had higher sensitivity compared with the spectrophotometric and high-performance liquid chromatography methods and could determine the drug at the microgram level. Optimum pH of TA for maximum fluorescence intensity was 3, and its two pKa values were calculated as 1.95 and 4.05. The proposed method was validated according to the guidelines of the International Council for Harmonisation, and parameters such as linearity, range, accuracy, precision, sensitivity, robustness, specificity, and solution stability were tested. Stress-induced degradation studies on TA did not affect the accuracy and precision of the proposed method. The results obtained indicated that the method was linear over the concentration range 0.2-0.9 × 10-3 M with good accuracy, precision, and robustness for assay of TA in its pure and its tablet dosage forms and was comparable statistically with the British Pharmacopoeia method.

Photolysis of thiochrome in aqueous solution: A kinetic study.

The photolysis of thiochrome (THC), an oxidation product of thiamine (vitamin B1) (THE), used for its fluorimetric assay, has been studied in the pH range 7.0-12.0. THC undergoes photooxidation to oxodihydrothiochrome (ODTHC) which is oxidized to a non-fluorescent compound (OP1) on UV irradiation. The kinetics of the consecutive first-order reactions: THC→k1ODTHC→k2OP1, has been evaluated and the values of first-order rate constants, k1 (0.58-4.20 × 10-5, s-1) and k2 (0.05-2.03 × 10-5, s-1), at pH 7.0-12.0 have been determined. The rates of degradation of THC and ODTHC are enhanced with pH and the second-order rate constants k1' and k2' for the OH- ion-catalyzed reaction are in the range of 0.002-58.3 M-1 s-1. The quantum yields of the photolysis of THC and ODTHC in the pH range 7.0-12.0 have been determined. THC, ODTHC and OP1 have been identified by chromatographic, spectrometric and fluorimetric methods. THC and ODTHC have similar fluorescence characteristics and emit at 450 and 445 nm, respectively. THC, ODTHC and OP1 with distinct absorption maxima (370, 344 and 290 nm, respectively) have been determined by a newly developed and validated multicomponent spectrometric method during the photolysis reactions. The on-line formation of THC by the photooxidation of THE may lead to the degradation of THC and give erroneous results in the fluorimetric assay of THE. A scheme for the photolysis reactions of THC in aqueous solution is presented.

Multicomponent spectrometric analysis of drugs and their preparations.

Pharmaceutical preparations may contain a single ingredient or multi-ingredients as well as excipients. In multicomponent systems, specific analytical methods are required to determine the concentrations of individual components in the presence of interfering substances. Ultraviolet and visible spectrometric methods have widely been developed for the analysis of drugs in mixtures and pharmaceutical preparations. These methods are based on ultraviolet and visible multicomponent analysis and chemometrics (multivariate data analysis). The commonly used chemometric methods include principal component analysis (PCA); regression involving classical least squares (CLS), partial least squares (PLS), inverse least squares (ILS), principal component regression (PCR), multiple linear regression (MLR), artificial neural networks (ANNs); soft independent modeling of class anthology (SIMCA), PLS-discriminant analysis (DA); and functional data analysis (FDA). In this chapter, the applications of multicomponent ultraviolet and visible, derivative, infrared and mass spectrometric and spectrofluorimetric methods to the analysis of multi-ingredient pharmaceutical preparations, biological samples and the kinetics of drug degradation have been reviewed. Chemometric methods provide an efficient solution to calibration problems in the analysis of spectral data for the simultaneous determination of drugs in multicomponent systems. These methods facilitate the assessment of product quality and enhance the efficiency of quality control systems.

Photolysis of carboxymethylflavin in aqueous and organic solvent: a kinetic study.

This is the first study on the photolysis of carboxymethylflavin (CMF), an intermediate in the photolysis of riboflavin (RF). CMF is photodegraded by removal of side-chain to lumichrome (LC) in acid solution and to LC and lumiflavin (LF) in alkaline solution. It also undergoes alkaline hydrolysis to 1,2-dihydro-1-methyl-2-keto-3-quinoxaline carboxylic acid (KA) and 1,2,3,4-tetrahydro-1-methyl-2,3-dioxoquinoxaline (DQ) by cleavage of isoalloxazine ring. CMF degrades to LC in organic solvents. The formation of LC in acid solution and organic solvents takes place by second-order reaction and those of LC, LF, KA and DQ in alkaline solution by first-order reactions. The values of second-order rate constants for the photolysis of CMF at pH 2.0 to 7.0 are in the range of 1.13 to 2.45 M-1 s-1 and those of first-order rate constants (k obs) at pH 8.0-12.0 from 1.53 to 4.18 × 10-4 s-1 and for the formation of photoproducts from 0.37 to 16.6 × 10-5 s-1. The photolysis of CMF is enhanced, with pH, in the alkaline region since the excited state is sensitive to alkaline hydrolysis. The photolysis and fluorescence quantum yields of CMF in aqueous and organic solvents have been reported. CMF and photoproducts have been assayed spectrofluorimetrically. The mode of CMF photolysis is discussed.

Multicomponent spectrofluorimetric method for the assay of carboxymethylflavin and its hydrolytic products: kinetic applications.

The simultaneous assay of carboxymethylflavin (CMF), an intermediate in the photolysis of riboflavin, and its hydrolytic side-chain cleavage products, lumichrome (LC) (acid solution) and LC and lumiflavin (LF) as well as isoalloxazine ring cleavage products, 1,2-dihydro-1-methyl-2-keto-3-quinoxaline carboxylic acid (KA) and 1,2,3,4-tetrahydro-1-methyl-2,3-dioxo-quinoxaline (DQ) (alkaline solution) has been carried out by a multicomponent spectrofluorimetric method. The method is based on the adjustment of pH of the degraded solutions to 2.0 and extraction of LC and LF with chloroform. The chloroform extract is evaporated to dryness under reduced pressure, the residue dissolved in pH 6.5 citro-phosphate buffer and LC and LF determined at their fluorescence maxima at 478 and 530 nm, respectively. The pH of the aqueous phase is re-adjusted to 6.5 and the solution used for the determination of CMF, KA and DQ at the wavelengths of 530, 443 and 420 nm, respectively. The proposed method has been validated according to ICH guidelines. The calibration curves for CMF and its hydrolytic products are linear in the concentration range of 0.5-5.0 × 10-6  M. The mean recovery ranges from 99.0-102.0% with relative standard deviation (RSD) of 0.19-0.99%. The limit of detection (LOD) and the limit of quantification (LOQ) are in the range of 1.17-1.78 × 10-7  M and 3.55-5.40 × 10-7  M, respectively. The uniformity of molar balance of CMF and degradation products during hydrolytic reactions indicates the accuracy of the proposed method for the spectrofluorimetric assay of the compounds. It has been applied to study the kinetics of hydrolytic reactions of CMF.

Multicomponent spectrofluorimetric method for the assay of formylmethylflavin and its hydrolytic products: Kinetic applications.

A multicomponent spectrofluorimetric method has been developed for the simultaneous assay of formylmethylflavin (FMF), an intermediate product in the photolysis of riboflavin (vitamin B2), and its side-chain hydrolytic products, lumichrome (LC) in acidic solution and LC and lumiflavin (LF) in the alkaline solution as well as its ring cleavage products, 1,2-dihydro-1-methyl-2-keto-3-quinoxaline carboxylic acid (KA) and 1,2,3,4-tetrahydro-1-methyl-2,3-dioxo-quinoxaline (DQ) in alkaline solution. The assay method also takes into account an oxidation product of FMF, i.e. carboxymethylflavin (CMF), in both acid and alkaline solutions. The method involves adjustment of the pH of hydrolysed solution to 2.0 to convert FMF to its protonated form, extraction of LC (acid solution) or LC and LF (alkaline solution) with chloroform and their simultaneous assay by fluorescence measurement at 478 and 530 nm, respectively. The aqueous phase is readjusted to pH 6.5, extracted with chloroform to remove undegraded FMF and used for the assay of CMF, KA and DQ at 530, 443 and 420 nm, respectively. The chloroform extract is used for the assay of FMF at 530 nm. The proposed method has been validated and applied to the study of the kinetics of a hydrolysis reaction of FMF at pH 11.0. The calibration curves for FMF and degradation products are linear in the range of 0.1-1.0 × 10-6 M. The limit of detection (LOD) and limit of quantification (LOQ) range from 2.54-5.75 × 10-8 M and 0.78-1.74 × 10-7 M, respectively, for these compounds. The mean recovery ranges from 99.3-102.1% with a RSD of 0.14-0.35%. Judging from the molar balance of FMF and the hydrolytic products, uniformity of analytical data during the reactions and linearity of kinetic plot, the method gives accurate results for the assay of FMF and all of its degradation products. It can be conveniently used for the assay of these compounds and for the kinetics and stability studies of FMF.

Stability-indicating spectrofluorimetric method for the assay of riboflavin and photoproducts: Kinetic applications.

A stability-indicating spectrofluorimetric method has been developed for the simultaneous assay of riboflavin (RF) and photoproducts, formylmethylflavin (FMF), lumichrome (LC) and lumiflavin (LF) in aqueous solution. The method is based on the extraction of LC formed in acid solution and LC and LF formed in alkaline solution with chloroform at pH 2.0 and their assay by fluorescence measurements at 478 and 530 nm, respectively. The aqueous phase, on readjustment of the pH to 6.5, is used to extract FMF with chloroform and its assay is carried out at 530 nm. The aqueous phase is then used for the assay of RF at 530 nm. The proposed method gives more accurate results for the assay of RF compared to those of the United States Pharmacopeia (USP) spectrofluorimetric method which does not take into account the presence of RF photoproducts having similar fluorescence characteristics. The proposed method along with the USP method has been applied to the study of the kinetics of photolysis of RF, assay of stored commercial vitamin preparations and their radiated samples. The results show that the USP method does not distinguish between the fluorescence of RF and its photoproducts, and, therefore, gives erroneous results with about 11% excess in the quantity of the vitamin compared to that of the proposed method. This is due to the interference of the fluorescence of photoproducts in the assay of RF. The method has been validated for various analytical parameters according to the guideline of the International Council for Harmonization (ICH).

Photochemical interaction of ascorbic acid and nicotinamide in aqueous solution: A kinetic study.

The photodegradation of ascorbic acid (AH2) in the presence of nicotinamide (NA) at pH 2.0-12.0 has been studied using a 30 W UV radiation source. The reaction follows first-order kinetics and the values of apparent first-order rate constants (kobs) at 1 × 10-3 M NA concentration range from 1.17 (pH 2.0) to 3.61 × 10-3 min-1 (pH 12.0). The values of these rate constants (k0) in the absence of NA range from 0.50 (pH 2.0) to 1.75 × 10-3 min-1 (pH 12.0), indicating that the values of kobs for the photodegradation of AH2 in the presence of NA are about 2 fold compared to those of the AH2 alone. The second-order rate constants (k') for the photochemical interaction of AH2 and NA are in the range of 0.67 (pH 2.0) and 1.86 × 10-3 M-1 min-1 (pH 12.0). The k'-pH profile shows a gradual increase in the rate as a function of pH. This is due to the ionization of AH2 to give ascorbyl anions (AH-) which are more susceptible to photodegradation compared to the neutral molecule (AH2). NA appears to undergo photochemical interaction with AH2 during the reaction by acting as an electron acceptor to enhance its rate of photodegradation. The concentrations of AH2 and NA in degraded solutions have been determined by a two-component spectrometric method at 243 and 261 nm (pH 2.0) with a precision of ±2%. The method has been validated and the results are comparable to the HPLC method.

Metal ion mediated photolysis reactions of riboflavin: A kinetic study.

The effect of metal ion complexation on the photolysis of riboflavin (RF) using various metal ions (Ag+, Ni2+, Co2+, Fe2+, Ca2+, Cd2+, Cu2+, Mn2+, Pb2+, Mg2+, Zn2+, Fe3+) has been studied. Ultraviolet and visible spectral and fluorimetric evidence has been obtained to confirm the formation of metal-RF complexes. The kinetics of photolysis of RF in metal-RF complexes at pH7.0 has been evaluated. The apparent first-order rate constant (kobs) for the photolysis of RF and the formation of lumichrome (LC) and lumiflavin (LF) (0.001M phosphate buffer) and LC, LF and cyclodehydroriboflavin (CDRF) (0.2-0.4M phosphate buffer) have been determined. The values of kobs indicate that the rate of photolysis of RF is promoted by divalent and trivalent metal ions. The second-order rate constants (k' ) for the interaction of metal ions with RF are in the order: Zn2+>Mg2+>Pb2+>Mn2+>Cu2+>Cd2+>Fe2+>Ca2+>Fe3+>Co2+>Ni2+>Ag+. In phosphate buffer (0.2-0.4M), an increase in the metal ion concentration leads to a decrease in the formation of LC compared to that of CDRF by different pathways. The photoproducts of RF have been identified and RF and the photoproducts have simultaneously been assayed by a multicomponent spectrometric method. The mode of photolysis of RF in metal-RF complexes has been discussed.

Effect of solvent polarity on the extraction of components of pharmaceutical plastic containers.

A study of the extraction of polymeric material and dyes from the pharmaceutical plastic containers using various organic solvents was conducted to evaluate the effect of polarity on the extraction process. The plastic containers used included semi-opaque, opaque, transparent and amber colored and the solvent used were acetonitrile, methanol, ethanol, acetone, dichloroethane, chloroform and water. The determination of extractable material was carried out by gravimetric and spectrometric methods. The yield of extractable materials from containers in 60 h was 0.10-1.29% (w/w) and the first-order rate constant (kobs) for the extraction of polymeric material ranged from 0.52-1.50 × 10-3 min-1 and for the dyes 6.43- 6.74 x10-3min-1. The values of (kobs) were found to be an inverse function of solvent dielectric constant and decreased linearly with the solvent acceptor number. The extractable polymeric materials exhibited absorption in the 200-400 nm region and the dyes in the 300-500nm region. The rates of extraction of polymeric material and dyes from plastic containers were dependent on the solvent dielectric constant. The solvents of low polarity were more effective in the extraction of material indicating that the extracted material were of low polarity or have non-polar character. The dyes were soluble in acetone and chloroform. No plastic material was found to be extracted from the containers in aqueous solution.