Implications of Anion Structure on Physicochemical Properties of DBU-Based Protic Ionic Liquids.

Protic ionic liquids (PILs) are potential candidates as electrolyte components in energy storage devices. When replacing flammable and volatile organic solvents, PILs are expected to improve the safety and performance of electrochemical devices. Considering their technical application, a challenging task is the understanding of the key factors governing their intermolecular interactions and physicochemical properties. The present work intends to investigate the effects of the structural features on the properties of a promising PIL based on the 1,8-diazabicyclo[5.4.0]undec-7-ene (DBUH+) cation and the (trifluoromethanesulfonyl)(nonafluorobutanesulfonyl)imide (IM14-) anion, the latter being a remarkably large anion with an uneven distribution of the C-F pool between the two sides of the sulfonylimide moieties. For comparison purposes, the experimental investigations were extended to PILs composed of the same DBU-based cation and the trifluoromethanesulfonate (TFO-) or bis(trifluoromethanesulfonyl)imide (TFSI-) anion. The combined use of multiple NMR methods, thermal analyses, density, viscosity, and conductivity measurements provides a deep characterization of the PILs, unveiling peculiar behaviors in DBUH-IM14, which cannot be predicted solely on the basis of differences between aqueous pKa values of the protonated base and the acid (ΔpKa). Interestingly, the thermal and electrochemical properties of DBUH-IM14 turn out to be markedly governed by the size and asymmetric nature of the anion. This observation highlights that the structural features of the precursors are an important tool to tailor the PIL's properties according to the specific application.

Composite Electrolyte & Electrode Membranes for Electrochemical Energy Storage & Conversion Devices.

 [...].

Influence of Carbonate-Based Additives on the Electrochemical Performance of Si NW Anodes Cycled in an Ionic Liquid Electrolyte.

Addition of electrolyte additives (ethylene or vinylene carbonate) is shown to dramatically improve the cycling stability and capacity retention (1600 mAh g-1) of Si nanowires (NWs) in a safe ionic liquid (IL) electrolyte (0.1LiTFSI-0.6PYR13FSI-0.3PYR13TFSI). We show, using postmortem SEM and TEM, a distinct difference in morphologies of the active material after cycling in the presence or absence of the additives. The difference in performance is shown by postmortem XPS analysis to arise from a notable increase in irreversible silicate formation in the absence of the carbonate additives. The composition of the solid electrolyte interphase (SEI) formed at the active material surface was further analyzed using XPS as a function of the IL components revealing that the SEI was primarily made up of N-, F-, and S-containing compounds from the degradation of the TFSI and FSI anions.

Magnetic Resonance Imaging and Molecular Dynamics Characterization of Ionic Liquid in Poly(ethylene oxide)-Based Polymer Electrolytes.

Ternary systems consisting of polymers, lithium salts, and ionic liquids (ILs) are promising materials for the development of next-generation lithium batteries. The ternary systems combine the advantages of polymer-salt and IL-salt systems, thus providing media with high ionic conductivity and solid-like mechanical properties. In this work, we apply nuclear magnetic resonance 1H microimaging [magnetic resonance imaging (MRI)] techniques and molecular dynamics (MD) simulations to study the translational and rotational dynamics of the N-butyl-N-methylpyrrolidinium (PYR14) cation in poly(ethylene oxide) (PEO) matrices containing the lithium bis(trifluoromethanesulfonyl) imide salt (LiTFSI) and the PYR14TFSI IL. The analysis of diffusion-weighted images in PEO/LiTFSI/PYR14TFSI samples with varying mole ratios (10:1:x, with x = 1, 2, 3, and 4) shows, in a wide range of temperatures, a spatially heterogeneous distribution of PYR14 diffusion coefficients. Their weight-averaged values increase with IL content but remain well below the values estimated for the neat IL. The analysis of T2 (spin-spin relaxation) parametric images shows that the PEO matrix significantly hinders PYR14 rotational freedom, which is only partially restored by increasing the IL content. The MD simulations, performed on IL-filled cavities within the PEO matrix, reveal that PYR14 diffusion is mainly affected by Li/TFSI coordination within the IL phase. In agreement with MRI experiments, increasing the IL content increases the PYR14 diffusion coefficients. Finally, the analysis of MD trajectories suggests that Li diffusion mostly develops within the IL phase, although a fraction of Li cations is strongly coordinated by PEO oxygen atoms.

Structural features of selected protic ionic liquids based on a super-strong base.

Protic ionic liquids (PIL) were prepared from a super-strong base 1,7-diazabicyclo[5.4.0]undec-7-ene (DBU) and super-strong acids, trifluoromethane sulfonic acid (TfOH), and (trifluoromethanesulfonyl)-(nonafluorobutylsulfonyl)imide, (IM14H), ([DBUH][TfO] and [DBUH][IM14], respectively; the latter for the first time) and their chemical and physical properties and structural features have been explored using a synergy of experimental and computational tools. The short range order in neat DBU, as well as the long range structural correlations induced by charge correlation and hydrogen bonding interactions in the ionic liquids, have been explored under ambient conditions, where these compounds are proposed for a variety of applications. Similar to other [DBUH]-based PILs, the probed ones behave as good ionic liquids. Molecular dynamics-rationalised X-ray diffraction patterns show the major role played by hydrogen bonding in affecting morphology in these systems. Additionally, we find further evidence for the existence of fluorous domains in [DBUH][IM14], thus potentially extending the range of applications for these PILs.

A More Sustainable and Cheaper One-Pot Route for the Synthesis of Hydrophobic Ionic Liquids for Electrolyte Applications.

An innovative one-pot synthetic process that uses water as the only processing solvent was used to obtain ionic liquids (ILs) in a yield of approximately 95 mol % and purity greater than 99.3 wt % (<2 ppm each of lithium, bromide and moisture) in a processing time of 1 h. Since no heating is needed for carrying out the reaction and no purification through sorbents is required, energy, time and chemicals can be saved to minimize waste production. The physicochemical and electrochemical validation, including tests in batteries, reported herein shows that the above-mentioned ILs have properties analogous to those of ILs prepared by standard reported procedures and show high performance without any further purification step through sorbents. These characteristics, in combination with low cost, easy execution and scale-up, sustainability and versatility, make the one-pot process even more appealing, especially for industrial-scale applications.

Ionic Liquid-Based Electrolyte Membranes for Medium-High Temperature Lithium Polymer Batteries.

Li⁺-conducting polyethylene oxide-based membranes incorporating N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide are used as electrolyte separators for all-solid-state lithium polymer batteries operating at medium-high temperatures. The incorporation of the ionic liquid remarkably improves the thermal, ion-transport and interfacial properties of the polymer electrolyte, which, in combination with the wide electrochemical stability even at medium-high temperatures, allows high current rates without any appreciable lithium anode degradation. Battery tests carried out at 80 °C have shown excellent cycling performance and capacity retention, even at high rates, which are never tackled by ionic liquid-free polymer electrolytes. No dendrite growth onto the lithium metal anode was observed.

From Nanoscale to Microscale: Crossover in the Diffusion Dynamics within Two Pyrrolidinium-Based Ionic Liquids.

Knowledge of the ion motion in room temperature ionic liquids (RTILs) is critical for their applications in a number of fields, from lithium batteries to dye-sensitized solar cells. Experiments on a limited number of RTILs have shown that on macroscopic time scales the ions typically undergo conventional, Gaussian diffusion. On shorter time scales, however, non-Gaussian behavior has been observed, similar to supercooled fluids, concentrated colloidal suspensions, and more complex systems. Here we characterize the diffusive motion of ionic liquids based on the N-butyl-N-methylpyrrolidinium (PYR14) cation and bis(trifluoro methanesulfonyl)imide (TFSI) or bis(fluorosulfonyl)imide (FSI) anions. A combination of pulsed gradient spin-echo (PGSE) NMR experiments and molecular dynamics (MD) simulations demonstrates a crossover from subdiffusive behavior to conventional Gaussian diffusion at ∼10 ns. The deconvolution of molecular displacements into a continuous spectrum of diffusivities shows that the short-time behavior is related to the effects of molecular caging. For PYR14FSI, we identify the change of short-range ion-counterion associations as one possible mechanism triggering long-range displacements.

Mesoscopic organization in ionic liquids.

We discuss some published results and provide new observations concerning the high level of structural complexity that lies behind the nanoscale correlations in ionic liquids (ILs) and their mixtures with molecular liquids. It turns out that this organization is a consequence of the hierarchical construction on both spatial (from ångström to several nanometer) and temporal (from fraction of picosecond to hundreds of nanosecond) scales, which requires joint use of experimental and computational tools.

Pyrrolidinium-based ionic liquids doped with lithium salts: how does Li(+) coordination affect its diffusivity?

We present the characterization of LiX-doped room-temperature ionic liquids (ILs) based on the N-butyl-N-methyl pyrrolidinium (PYR14) cation with two fluorinated anions: (trifluoromethanesulfonyl)-(nonafluorobutanesulfonyl)imide (X═IM14) and bis(pentafluoroethanesulfonyl)imide (X═BETI). The new data are also compared with previous results on PYR14TFSI (bis(trifluoromethanesulfonyl)imide). Their local organization has been investigated via NMR nuclear Overhauser effect (NOE) experiments for {(1)H-(19)F} and {(1)H-(7)Li} that give us details on PYR14(+)/X(-) and PYR14(+)/Li(+) contacts. We confirm the presence of [Li(X)2](-) coordinated species in all systems. The long-range, intermolecular NOEs have been detected and provide information on the ions' organization beyond the first solvation sphere. The ionic conductivity, viscosity and self-diffusion coefficients of the ionic mixtures have also been measured. The activation energies for the diffusion of the individual ions and for the fluidity are compared with those for the pure ILs. Finally, density functional calculations on [Li(BETI)2](-), [Li(IM14)2](-), and [Li(TFSI)2](-) complexes demonstrate that the minimum energy structures for all systems correspond to a tetrahedral coordination of the Li-ion by four oxygen atoms of the anions. Assuming very simple key steps for the Li(+) diffusion process (i.e., the concerted breaking and formation of Li-O bonds or the rearrangement around a tetrahedrally coordinated Li(+)), we calculate activation barriers that agree well with the experimental results (approximately 46 kJ/mol, in all systems).

Mesoscopic structural organization in triphilic room temperature ionic liquids.

Room temperature ionic liquids are one of the most exciting classes of materials in the last decade. The interest for these low melting, ionic compounds stems from both their technological impact and the stimulating plethora of structural and dynamic peculiarities in the mesoscopic space-time scales. It is nowadays well-established that they are characterised by an enhanced degree of mesoscopic order originating from their inherent amphiphilicity. In this contribution we highlight the existence of a further degree of mesoscopic complexity when dealing with RTILs bearing a medium length fluorous tail: such triphilic materials (they simultaneously contain polar, hydrophobic and fluorophilic moieties that mutually segregate from each other) turn out to be highly structurally compartmentalised at the mesoscopic level, thus paving the way to new smart applications for this new class of RTILs.

Blending ionic liquids: how physico-chemical properties change.

Ionic liquids offer the opportunity of tailoring their properties by changing the chemical structure of the cation and anion. Blending of two or more liquids adds a further dimension to this "chemical space". Here we present the results of a study of three binary and one ternary mixture of the ionic liquids formed by the N-butyl-N-methylpyrrolidinium cation with bis(trifluoromethanesulfonyl) imide, bis(pentafluoroethanesulfonyl) imide and (trifluoromethanesulfonyl)(nonafluorobutanesulfonyl) imide. We have collected viscosity and NMR-based data on ionxion correlations (NOE) and diffusion (DOSY). We also attempt to establish a quantitative correlation between mixture and the corresponding pure liquid properties. We find that the binary mixture containing the two very different anions has an intriguing and somewhat anomalous behaviour.

Structural organization and transport properties of novel pyrrolidinium-based ionic liquids with perfluoroalkyl sulfonylimide anions.

Room-temperature ionic liquids (RTILs) based on the N-butyl-N-methyl pyrrolidinium cation (PYR(14)(+)) combined with three different fluorinated anions have been prepared and characterized by NMR, conductivity, and rheological measurements. The anions are (trifluoromethanesulfonyl)(nonafluorobutanesulfonyl)imide (IM(14)(-)), bis(pentafluoroethanesulfonyl)imide (BETI(-)), and bis(trifluoromethanesulfonyl)imide (TFSI(-)). Intermolecular anion-cation nuclear Overhauser enhancements (NOEs) have been experimentally observed in all titled compounds. These findings indicate the formation of long-lived aggregates in the bulk liquids. The NOE patterns show marked selectivity and can be rationalized assuming that the perfluorinated moieties of the anions tend to adopt a preferential orientation with respect to the cations, with possible formation of mesoscopic fluorous domains. Self-diffusion coefficients D for the anion and the cation have been measured by DOSY NMR. Diffusion data show similar but not identical values for cation and anion, consistent with local ordering at the molecular level. The observed trend in diffusion coefficients, D(cation) > D(anion) for all compounds, is compatible with a higher degree of intermolecular organization of the anions. This nanoscale organization is connected to rather strong deviations of the experimental conductivities from those estimated from the ion diffusion coefficients through the Nernst-Einstein relationship. The measured viscosities and ion diffusion coefficients in PYR(14)IM(14) and in PYR(14)TFSI have similar temperature dependencies, leading to very close values of the activation energies for these processes. Ab initio density functional calculations on models of a PYR(14)TFSI ion pair lead to the identification of several local minima, whose structure and energy can be qualitatively related to the experimental NOE signals and activation energies.

Nanoscale organization in piperidinium-based room temperature ionic liquids.

Here we report on the complex nature of the phase diagram of N-alkyl-N-methylpiperidinium bis(trifluoromethanesulfonyl)imide ionic liquids using several complementary techniques and on their structural order in the molten state using small-wide angle x-ray scattering. The latter study indicates that the piperidinium aliphatic alkyl chains tend to aggregate, forming alkyl domains embedded into polar regions, similar to what we recently highlighted in the case of other ionic liquids.