A wearable, flexible sensor for real-time, home monitoring of sleep apnea.

A flexible sensor that can be attached to the body to collect vital data wirelessly enables real-time human healthcare management. One potential application for home-use healthcare devices is monitoring of sleep conditions to diagnose sleep apnea syndrome. Such data are not readily gathered using conventional tools, owing to the bulk and cost of instrumentation. In order to monitor respiration at home, it is necessary to improve sensing performance and long-term stability of the sensors without sacrificing wearability and comfortability. To build a platform for wireless home-use respiration monitoring, this study develops a mask-borne flexible humidity sensor using ZnIn2S4 nanosheets as a humidity-sensitive material with high sensitivity and stability for more than 150 h. As proof-of-concept, long-term wireless respiration monitoring is demonstrated during sleep to identify symptoms of sleep apnea in wearers.

A Multitasking Flexible Sensor via Reservoir Computing.

Natural disasters are reported globally, and one source of severe damage to cities is flooding caused by locally heavy rain. Sharing of local weather information can save lives. However, it is difficult to collect local weather information in real-time because such data collection requires bulky, expensive sensors. For local, real-time monitoring of heavy rain and wind, a sensor system should be simple and low-cost so that it can be attached to a variety of surfaces, including roofs, vehicles, and umbrellas. To develop simple, low-cost multitasking sensors located on nonplanar surfaces, a flexible rain sensor to monitor waterdrop volume and wind velocity is devised. To monitor both simultaneously, a laser-induced graphene-based superhydrophobic conductive film is introduced. Using the superhydrophobic surface, water dynamics are measured when waterdrops collide with the sensor surface, and obtained time-series data are processed using "reservoir computing" to extract the volume and velocity from a single sensor as multitasking electronics. As a proof-of-concept, it is shown that the sensor measures continuous, long-term volume and wind-change dynamics. The results demonstrate feasibility of multitasking electronics with reservoir computing to reduce sensor integration complexity with low power consumption for both sensor and signal processing.

Controlling the thermal conductivity of multilayer graphene by strain.

Straintronics is a new concept to enhance electronic device performances by strain for next-generation information sensors and energy-saving technologies. The lattice deformation in graphene can modulate the thermal conductivity because phonons are the main heat carriers. However, the device fabrication process affects graphene's heat transport properties due to its high stretchability. This study experimentally investigates the change in the thermal conductivity when biaxial tensile strain is applied to graphene. To eliminate non-strain factors, two mechanisms are considered: pressure-induced and electrostatic attraction-induced strain. Raman spectroscopy and atomic force microscopy precisely estimate the strain. The thermal conductivity of graphene decreases by approximately 70% with a strain of only 0.1%. Such thermal conductivity controllability paves the way for applying graphene as high-efficiency thermal switches and diodes in future thermal management devices.

Wireless and Flexible Skin Moisture and Temperature Sensor Sheets toward the Study of Thermoregulator Center.

A disorder in the thermoregulator center in a human body leads to some potential diseases such as fever and hyperthyroidism. To predict these diseases early, monitoring the health condition of the human body due to the influence of thermoregulation disorders is important. Although extensive works are performed on sweat-rate detection by constructing microfluidic channels, skin-moisture evaporation before sweating remains unknown. This work proposes a wireless and flexible sensor sheet to investigate the thermoregulatory responses of different people under cold stimulation and exercise by measuring the temperature and moisture variations on the finger skin. An integrated flexible sensor system consists of a ZnIn2 S4 nanosheet-based humidity sensor and carbon nanotube/SnO2 temperature sensor. The results exhibit distinct thermoregulation abilities of five volunteers. Interestingly, the sudden increase in finger moisture that results from the excitation by the sympathetic nerve is observed during the cold-stimulus test. Although further studies are required to predict the potential diseases resulted from thermoregulation disorders in human body, this study provides a possibility of continuous and real-time monitoring of thermoregulatory activities via skin moisture and temperature detection using a flexible sensor sheet.

Multimodal Wearable Sensor Sheet for Health-Related Chemical and Physical Monitoring.

Continuous multiple data health monitoring has high potential to detect abnormal conditions or early stages of diseases in the future. To monitor a continuous small vital signal, one of the promising architectures is an attachable flexible multimodal sensor system, which can detect multiple health conditions from the skin surface. Recent breakthroughs have realized continuous sweat chemicals or physical conditions using flexible sensors. However, multimodal sensor integration to monitor chemical and physical information simultaneously and precisely is still a challenge. In this study, we present a multimodal wearable sensor sheet, which allows us to monitor sweat glucose, electrocardiograms, and skin temperature. Furthermore, to prevent the accumulation of glucose on the sensor surface for precise monitoring, a fluidic channel is also integrated to refresh the sweat from the sensor surface, resulting in the precise measurement of chemical substances in real time. This multimodal and flexible sensor platform takes a significant step toward realizing wearable healthcare applications to diagnose the early stages of diseases in advance.

A Wearable Body Condition Sensor System with Wireless Feedback Alarm Functions.

Emerging feedback systems based on tracking body conditions can save human lives. In particular, vulnerable populations such as disabled people, elderly, and infants often require special care. For example, the high global mortality of infants primarily owing to sudden infant death syndrome while sleeping makes request for extraordinary attentions in neonatal intensive care units or daily lives. Here, a versatile laser-induced graphene (LIG)-based integrated flexible sensor system, which can wirelessly monitor the sleeping postures, respiration rate, and diaper moisture with feedback alarm notifications, is reported. A tilt sensor based on confining a liquid metal droplet inside a cavity can track at least 18 slanting orientations. A rapid and scalable laser direct writing method realizes LIG patterning in both the in-plane and out-of-plane configurations as well as the formation of nonstick conductive structures to the liquid metal. By rationally merging the LIG-based tilt, strain, and humidity sensors on a thin flexible film, the multimodal sensor device is applied to a diaper as a real-time feedback tracking system of the sleeping posture, respiration, and wetness toward secure and comfortable lives. User-friendly interfaces, which incorporate alarming functions, provide timely feedback for caregivers tending to vulnerable populations with limited self-care capabilities.

Highly stable Pd/HNb3O8-based flexible humidity sensor for perdurable wireless wearable applications.

Real-time, daily health monitoring can provide large amounts of patient data, which may greatly improve the likelihood of diagnosing health conditions at an early stage. One potential sensor is a flexible humidity sensor to monitor moisture and humidity information such as dehydration. However, achieving a durable functional nanomaterial-based flexible humidity sensor remains a challenge due to partial desorption of water molecules during the recovery process, especially at high humidities. In this work, we demonstrate a highly stable resistive-type Pd/HNb3O8 humidity sensor, which exhibits a perdurable performance for over 100 h of cycle tests under a 90% relative humidity (RH) without significant performance degradation. One notable advantage of the Pd/HNb3O8 humidity sensor is its ability to regulate hydroniums due to the strong reducibility of H atoms dissociated on the Pd surface. This feature realizes a high stability even at a high humidity (99.9% RH). Using this superior performance, the Pd/HNb3O8 humidity sensor realizes wireless monitoring of the changes in the fingertip humidity of an adult under different physiological states, demonstrating a facile and reliable path for dehydration diagnosis.

Multimodal Plant Healthcare Flexible Sensor System.

The rising global human population and increased environmental stresses require a higher plant productivity while balancing the ecosystem using advanced nanoelectronic technologies. Although multifunctional wearable devices have played distinct roles in human healthcare monitoring and disease diagnosis, probing potential physiological health issues in plants poses a formidable challenge due to their biological complexity. Herein an integrated multimodal flexible sensor system is proposed for plant growth management using stacked ZnIn2S4(ZIS) nanosheets as the kernel sensing media. The proposed ZIS-based flexible sensor can not only perceive light illumination at a fast response (∼4 ms) but also monitor the humidity with a perdurable steady performance that has yet to be reported elsewhere. First-principles calculations reveal that the tunneling effect dominates the current model associated with humidity response. This finding guides the investigation on the plant stomatal functions by measuring plant transpiration. Significantly, dehydration conditions are visually recorded during a monitoring period (>15 days). This work may contribute to plant-machine biointerfaces to precisely manage plant health status and judiciously utilize limited resources.

Very Thin, Macroscale, Flexible, Tactile Pressure Sensor Sheet.

In artificial intelligence and deep learning applications, data collection from a variety of objects is of great interest. One way to support such data collection is to use very thin, mechanically flexible sensor sheets, which can cover an object without altering the original shape. This study proposes a thin, macroscale, flexible, tactile pressure sensor array fabricated by a simple process for economical device applications. Using laser-induced graphene, a transfer process, and a printing method, a relatively stable, reliable, macroscale, thin (∼300 µm), flexible, tactile pressure sensor is realized. The detectable pressure range is about tens to hundreds of kPa. Then, as a proof-of-concept, the uniformity, sensitivity, repeatability, object mapping, finger pressure distribution, and pressure mapping are demonstrated under bending conditions. Although many flexible, tactile pressure sensors have been reported, the proposed structure has the potential for macroscale, thin, flexible, tactile pressure sensor sheets because of the simple and easy fabrication process.

Wrist flexible heart pulse sensor integrated with a soft pump and a pneumatic balloon membrane.

To monitor health and diagnose disease in the early stage, future healthcare standards will likely include the continuous monitoring of various vital data. One approach to collect such information is a wearable and flexible device, which detects information from the skin surface. An important dataset is heart pulse information. Herein a method to monitor the detailed pulse signal from a wrist stably and reliably is proposed. Specifically, a soft pneumatic balloon operated by a soft pump applies the appropriate pressure over a tactile sensor onto the radial artery of the wrist to detect detailed heart pulse waves. The soft pump, pneumatic balloon, and flexible tactile pressure sensor are characterized as a fundamental study. Additionally, a proof-of-concept of this integrated device platform is demonstrated by monitoring the heart pulse from a wrist with and without the soft pump functions.

Highly Precise Multifunctional Thermal Management-Based Flexible Sensing Sheets.

Elaborate manipulation of heat transfer renders proper operation of diverse thermal-related technologies. However, accurate implementation of thermal-based or transduction sensing on a thin flexible film over unusual surfaces remains challenging. Herein, efficient thermal management realizes highly accurate flexible multifunctional sensor sheets using a low thermal conductive medium as a thermal barrier. An approximately 50-fold enhancement in the thermal sensing accuracy, which is nearly independent of the changes in the external surroundings, is achieved. Such rational control of heat convection and conduction allows to not only dynamically monitor air flow, but also sight the large-scale air flow distribution on curved surfaces using a flexible thermal flow sensor array. Additionally, accurate wearable skin temperature monitoring independent of the sudden surrounding variations is achieved. This work addresses the formidable challenge of untethered heat transfer induced imprecise thermal related sensing, which universally exists in skin-inspired Internet of Things (IoT) applications.

Graphene and Carbon Nanotube Heterojunction Transistors with Individual Gate Control.

Heterogeneously integrated nanomaterial devices show interesting characteristics for transistors and sensors due to their band diagram or steep material junctions. If these junctions and band alignments can be tuned by an electrical input bias, the device platform not only could be expanded but also could be used to explore fundamental characteristics. However, most reports on hetero-nanomaterial junctions use a global back-gate voltage, which makes it difficult to control band alignment at an interface. To explore device junctions, this study reports a laterally integrated heterojunction of graphene and a carbon nanotube (CNT) network film with individual gate electrodes to tune the band alignment corresponding to the Fermi level shift of graphene in contact with the semiconducting CNT network film. By developing the fabrication process, multiple gate structures are designed to apply a gate bias to CNTs and graphene separately. The threshold voltage shift of the CNT transistor depends on the gate voltage of graphene. Based on the thermionic emission theory, the barrier height between graphene and CNTs for both the conduction and valence band sides varies from 70 to 85 meV, with a linear change as a function of the applied gate voltage to graphene. Although the current Fermi level shift is small, this device platform may realize the exploration of fundamental properties and device concepts.

All-Solution-Based Heterogeneous Material Formation for p-n Junction Diodes.

All-solution-based devices have potential as the next class of macroscale and multifunctional electronics on versatile amorphous substrates. Different methods and materials have been studied to control the formation of p-type and n-type semiconducting materials because forming active materials for transistors and sensors remains a challenge. This study proposes an approach for solution-based devices in which a p-n junction diode is fabricated using a solution-based InZnO thin film for the n-type semiconductor and a carbon nanotube network film for the p-type semiconductor. Additionally, the barrier height (∼160 meV) is extracted and a p-n junction diode on a plastic film is demonstrated. Although the performance requires further improvements by modifying the interfaces, this printing method may be an interesting approach for all-printed electronics, which can replace conventional Si electronics.

Photoresponse of graphene field-effect-transistor with n-type Si depletion layer gate.

Graphene/semiconductor Schottky junctions are an emerging field for high-performance optoelectronic devices. This study investigates not only the steady state but also the transient photoresponse of graphene field-effect transistor (G-FET) of which gate bias is applied through the Schottky barrier formed at an n-type Si/graphene interface with a thin oxide layer, where the oxide thickness is sufficiently thin for tunneling of the charge carrier. To analyze the photoresponse, we formulate the charge accumulation process at the n-Si/graphene interface, where the tunneling process through the SiOx layer to graphene occurs along with recombination of the accumulated holes and the electrons in the graphene at the surface states on the SiOx layer. Numerical calculations show good qualitative agreement with the experimentally obtained results for the photoresponse of G-FET.

Wearable, Flexible, and Multifunctional Healthcare Device with an ISFET Chemical Sensor for Simultaneous Sweat pH and Skin Temperature Monitoring.

Real-time daily healthcare monitoring may increase the chances of predicting and diagnosing diseases in their early stages which, currently, occurs most frequently during medical check-ups. Next-generation noninvasive healthcare devices, such as flexible multifunctional sensor sheets designed to be worn on skin, are considered to be highly suitable candidates for continuous real-time health monitoring. For healthcare applications, acquiring data on the chemical state of the body, alongside physical characteristics such as body temperature and activity, are extremely important for predicting and identifying potential health conditions. To record these data, in this study, we developed a wearable, flexible sweat chemical sensor sheet for pH measurement, consisting of an ion-sensitive field-effect transistor (ISFET) integrated with a flexible temperature sensor: we intend to use this device as the foundation of a fully integrated, wearable healthcare patch in the future. After characterizing the performance, mechanical flexibility, and stability of the sensor, real-time measurements of sweat pH and skin temperature are successfully conducted through skin contact. This flexible integrated device has the potential to be developed into a chemical sensor for sweat for applications in healthcare and sports.

Direct measurement of optical trapping force gradient on polystyrene microspheres using a carbon nanotube mechanical resonator.

Optical tweezers based on optical radiation pressure are widely used to manipulate nanoscale to microscale particles. This study demonstrates direct measurement of the optical force gradient distribution acting on a polystyrene (PS) microsphere using a carbon nanotube (CNT) mechanical resonator, where a PS microsphere with 3 µm diameter is welded at the CNT tip using laser heating. With the CNT mechanical resonator with PS microsphere, we measured the distribution of optical force gradient with resolution near the thermal noise limit of 0.02 pN/µm in vacuum, in which condition enables us to high accuracy measurement using the CNT mechanical resonator because of reduced mechanical damping from surrounding fluid. The obtained force gradient and the force gradient distribution agree well with theoretical values calculated using Lorenz-Mie theory.

Efficient Skin Temperature Sensor and Stable Gel-Less Sticky ECG Sensor for a Wearable Flexible Healthcare Patch.

Wearable, flexible healthcare devices, which can monitor health data to predict and diagnose disease in advance, benefit society. Toward this future, various flexible and stretchable sensors as well as other components are demonstrated by arranging materials, structures, and processes. Although there are many sensor demonstrations, the fundamental characteristics such as the dependence of a temperature sensor on film thickness and the impact of adhesive for an electrocardiogram (ECG) sensor are yet to be explored in detail. In this study, the effect of film thickness for skin temperature measurements, adhesive force, and reliability of gel-less ECG sensors as well as an integrated real-time demonstration is reported. Depending on the ambient conditions, film thickness strongly affects the precision of skin temperature measurements, resulting in a thin flexible film suitable for a temperature sensor in wearable device applications. Furthermore, by arranging the material composition, stable gel-less sticky ECG electrodes are realized. Finally, real-time simultaneous skin temperature and ECG signal recordings are demonstrated by attaching an optimized device onto a volunteer's chest.

Resonance Control of a Graphene Drum Resonator in a Nonlinear Regime by a Standing Wave of Light.

We demonstrate the control of resonance characteristics of a drum-type graphene mechanical resonator in a nonlinear oscillation regime using the photothermal effect, which is induced by a standing wave of light between graphene and a substrate. Unlike the resonance characteristics of a conventional Duffing-type nonlinearity, those of the nonlinear oscillation regime are modulated by the standing wave of light with a contribution of the scattered light of an actuation laser, despite a slight variation of amplitude. Numerical calculations conducted with a combination of equations of heat and motion with the Duffing-type nonlinearity explain this modulation: the photothermal effect delays the modulation of graphene stress or tension.

Oscillation control of carbon nanotube mechanical resonator by electrostatic interaction induced retardation.

Despite the superb intrinsic properties of carbon nanotube mechanical resonators, the quality factors at room temperature are 1,000 or less, even in vacuum, which is much lower than that of mechanical resonators fabricated using a top-down approach. This study demonstrates the improvement of the quality factor and the control of nonlinearity of the mechanical resonance of the cantilevered nanotube by electrostatic interaction. The apparent quality factor of the nanotube supported by insulator is improved drastically from approximately 630 to 3200 at room temperature. Results show that retardation of the electrostatic force induced by the contact resistance between the nanotube and the insulator support improves the quality factor. Finite element method calculation reveals that the nonuniform pileup charge on the insulator support strongly influences the nonlinearity of the resonance.

Printed multifunctional flexible device with an integrated motion sensor for health care monitoring.

Real-time health care monitoring may enable prediction and prevention of disease or improve treatment by diagnosing illnesses in the early stages. Wearable, comfortable, sensing devices are required to allow continuous monitoring of a person's health; other important considerations for this technology are device flexibility, low-cost components and processing, and multifunctionality. To address these criteria, we present a flexible, multifunctional printed health care sensor equipped with a three-axis acceleration sensor to monitor physical movement and motion. Because the device is designed to be attached directly onto the skin, it has a modular design with two detachable components: One device component is nondisposable, whereas the other one is disposable and designed to be worn in contact with the skin. The design of this disposable sensing sheet takes into account hygiene concerns and low-cost materials and fabrication methods as well as features integrated, printed sensors to monitor for temperature, acceleration, electrocardiograms, and a kirigami structure, which allows for stretching on skin. The reusable component of the device contains more expensive device components, features an ultraviolet light sensor that is controlled by carbon nanotube thin-film transistors, and has a mechanically flexible and stable liquid metal contact for connection to the disposable sensing sheet. After characterizing the electrical properties of the transistors and flexible sensors, we demonstrate a proof-of-concept device that is capable of health care monitoring combined with detection of physical activity, showing that this device provides an excellent platform for the development of commercially viable, wearable health care monitors.