RESUMO
Sandwich d/f heterometallic complexes [(Ln(hfac)3)2M(acac)3] (Ln = La, Pr, Sm, Dy and M = Co; Ln = La and M = Ru) were prepared in strictly anhydrous conditions reacting the formally unsaturated fragment [Ln(hfac)3] and [M(acac)3] in a 2-to-1 molar ratio. These heterometallic complexes are highly sensitive to moisture. Spectroscopic observation revealed that on hydrolysis, these compounds yield dinuclear heterometallic compounds [Ln(hfac)3M(acac)3], prepared here for comparison purposes only. Quantum mechanical calculations supported, on the one hand, the hypothesis on the geometrical arrangement obtained from ATR-IR and NMR spectra and, on the other hand, helped to rationalize the spontaneous hydrolysis reaction.
RESUMO
This study validates a computational protocol to predict the stability of heterodinuclear complexes by varying ligands on both moieties and analyzing the reaction Gibbs free energy (ΔGr) values. To this purpose, a series of Eu-Al complexes with the general formula [Eu(LEu)3Al(LAl)3], where LEu is the ligand of europium and LAl is an oxygen donor ligand of aluminum, is used. The nature of the bridging bonds and thermochemical characteristics (ΔGr, enthalpy, and entropy) of the complexes were evaluated via DFT calculations. We demonstrated that both entropic and enthalpic effects play a relevant role in the stability. The analysis of the series allows us to identify three ΔGr ranges where heterodinuclear complexes are (i) stable and easy to characterize, (ii) fragile and difficult to characterize, and (iii) not observed (unreacted precursors are recovered). To rationalize the trend of the stability and correlate it with the chemical nature of the ligands, we investigated the condensed Fukui function on the Al fragment. Results suggest that to obtain stable heteronuclear complexes, it is necessary to consider ligands with small condensed Fukui function values. This corresponds to a less nucleophilic oxygen site, yet counterintuitively, it allows the ligand to delocalize the received electronic charge and stabilize the complex.
RESUMO
Rare-earth tris-diketonato [RE(dike)3pyterpy] metalloligands can be prepared reacting at room temperature [RE(dike)3dme] (dme = 1,2-dimethoxyethane; dike = tta with Htta = 2-thenoyltrifluoroacetone and RE = La, 1; Y, 2; Eu, 3; Dy, 4; or dike = hfac with Hhfac hexafluoroacetylacetone, and RE = Eu, 5; Tb, 6; Yb 7) with 4'-(4â´-pyridil)-2,2':6',2â³-terpyridine (pyterpy). The molecular structures of 1, 5, 6, and 7 have been studied through single-crystal X-ray diffraction showing mononuclear neutral complexes with the rare-earth ion in coordination number nine and with a muffin-like coordination geometry. [RE(tta)3pyterpy] promptly reacts with [M(tta)2dme] with formation of [Mpyterpy2][RE(tta)4]2 (M = Zn, RE = Y, 8; M = Co, RE = Dy, 9). Consistently, [Zn(hfac)2dme] reacts at room temperature with 2 equiv of pyterpy yielding [Znpyterpy2][hfac]2 10 that easily can be transformed by reaction with 2 equiv of [Eu(hfac)3] in [Znpyterpy2][Eu(hfac)4]2 11 that has been structurally characterized. Finally, 1, 2, 3, 5, and 7 metalloligands react at room temperature in few minutes with [PtCl(µ-Cl)PPh3]2 yielding the heterometallic molecular complexes [RE(dike)3pyterpyPtCl2PPh3] (dike = tta, RE = La, 12; Y, 13; Eu; 14; dike = hfac, RE = Eu, 15; Yb, 16).
RESUMO
A reaction in anhydrous toluene between the formally unsaturated fragment [Ln(hfac)3] (Ln3+ = Eu3+, Gd3+ and Er3+; Hhfac = hexafluoroacetylacetone) and [Al(qNO)3] (HqNO = 8-hydroxyquinoline N-oxide), here prepared for the first time from [Al(OtBu)3] and HqNO, affords the dinuclear heterometallic compounds [Ln(hfac)3Al(qNO)3] (Ln3+ = Eu3+, Gd3+ and Er3+) in high yields. The molecular structures of these new compounds revealed a dinuclear species with three phenolic oxygen atoms bridging the two metal atoms. While the europium and gadolinium complexes show the coordination number (CN) 9 for the lanthanide centre, in the complex featuring the smaller erbium ion, only two oxygens bridge the two metal atoms for a resulting CN of 8. The reaction of [Eu(hfac)3] with [Alq3] (Hq = 8-hydroxyquinoline) in the same conditions yields a heterometallic product of composition [Eu(hfac)3Alq3]. A recrystallization attempt from hot heptane in air produced single crystals of two different morphologies and compositions: [Eu2(hfac)6Al2q4(OH)2] and [Eu2(hfac)6(µ-Hq)2]. The latter compound can be directly prepared from [Eu(hfac)3] and Hq at room temperature. Quantum mechanical calculations confirm (i) the higher stability of [Eu(hfac)3Al(qNO)3] vs. the corresponding [Eu(hfac)3Alq3] and (ii) the preference of the Er complexes for the CN 8, justifying the different behaviour in terms of the Lewis acidity of the metal centre.
RESUMO
The "on-demand" capture and utilization of CO2 is effectively realized with a readily accessible dual function organic composite. The covalent and controlled derivatization of graphene oxide (GO) surface with naturally occurring arginine led to a "smart" material capable of capturing (chemisorption) CO2 from high-purity flue-gas as well as low-concentration streams (i. e. direct air capture) and concomitant chemical activation toward the incorporation into cyclic carbonates. The overall integrated CO2 capture and conversion (ICCC) strategy has been fully elucidated mechanistically via dedicated computational, spectroscopic and thermal analyses.
RESUMO
Among semiconductor metal oxides, that are an important class of sensing materials, titanium dioxide (TiO2) thin films are widely employed as sensors because of their high chemical and mechanical stability in harsh environments, non-toxicity, eco-compatibility, and photocatalytic properties. TiO2-based chemical oxygen demand (COD) sensors exploit the photocatalytic properties of TiO2 in inducing the oxidation of organic compounds to CO2. In this work, we discuss nanostructured TiO2 thin films grown via low-pressure metal organic chemical vapor deposition (MOCVD) on metallic AISI 316 mesh. To increase the surface sensing area, different inorganic acid-based chemical etching protocols have been developed, determining the optimal experimental conditions for adequate substrate roughness. Both chemically etched pristine meshes and the MOCVD-coated ones have been studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray (EDX) microanalysis, and X-ray photoelectron spectroscopy (XPS). We demonstrate that etching by HCl/H2SO4 at 55 °C provides the most suitable surface morphology. To investigate the behavior of the developed high surface area TiO2 thin films as COD sensors, photocatalytic degradation of functional model pollutants based on ISO 10678:2010 has been tested, showing for the best performing acid-etched mesh coated with polycrystalline TiO2 an increase of 60% in activity, and degrading 66 µmol of MB per square meter per hour.
RESUMO
The interest for heterometallic lanthanide-d or-p metal (Ln-M) complexes is growing because of a potential cooperative or synergistic effect related to the proximity of two different metals in the same molecular architecture affording special tunable physical properties. To exploit the potentiality of Ln-M complexes, suitable synthetic approaches, and the in-depth understanding of the effect of each building block on their properties are mandatory. Here, we report the study on a family of heterometallic luminescent complexes [Ln(hfac)3Al(L)3], Ln= Eu3+ and Tb3+. Using different L ligands, we investigated the effect of the steric and electronic properties of the Al(L)3 fragment, highlighting the general validity of the employed synthetic route. A marked difference in the light emission of [Eu(hfac)3Al(L)3] and [Tb(hfac)3Al(L)3] complexes has been observed. Thanks to photoluminescence experiments and Density Functional Theory calculations, Ln3+ emissions are explained with a model involving two non-interacting excitation paths through hfac or Al(L)3 ligands.
RESUMO
The similar reactivity of lanthanides generally leads to statistically populated polynuclear complexes, making the rational design of ordered hetero-lanthanide compounds extremely challenging. Here we report on the site selectivity in hetero-lanthanide tetranuclear complexes afforded by the relatively simple ditopic pyterpyNO ligand (4'-(4-pyridil)-2,2':6',2"-terpyridine N-oxide). The sequential room temperature reaction of RE2 (tta)6 (pyterpyNO)2 (where RE=Y, (1); Eu, (2), Dy, (3) Htta=2-thenoyltrifluoroacetone) with La(tta)3 dme (dme=dimethoxyethane) yielded Y2 La2 (tta)12 (pyterpyNO)2 (4), Dy2 La2 (tta)12 (pyterpyNO)2 (5) and Eu2 La2 (tta)12 (pyterpyNO)2 (6). Single crystals X-ray diffraction studies showed that 4, 5 and 6 are isostructural, featuring a tetranuclear structure with two different metal coordination sites with coordination numbers 8 (CN8) and 9 (CN9). The two smaller cations are mainly bridged by the O-donor atoms of the NO groups of two pyterpyNO ligands (CN8), while the larger lanthanum centres are bound by a terpyridine unit (CN9). Size selectivity has been studied with structural and magnetic studies in the solid state and through 19 Fâ NMR and photoluminescence studies in solution, showing a direct dependence on the difference of ionic radii of the ions and yielding a 91 % selectivity for 4. Furthermore, 19 Fâ NMR, X-ray and PL studies pointed out that the nature of the product is independent from the synthetic route for compound Eu2 Y2 (tta)12 (pyterpyNO)2 (7), keeping the ion selectivity also for a self-assembly reaction. Unexpectedly, these studies have evidenced that selectivity is not exclusively governed by electrostatic interactions related to size dimensions.
RESUMO
To drive the synthesis of metallo-supramolecular assemblies (MSAs) and to fully exploit their functional properties, robust computational tools are crucial. The capability to model and to rationalize different parameters that can influence the outcome is mandatory. Here, we report a computational insight on the factors that can determine the relative stability of the supramolecular isomers helicate and mesocate in lanthanide-based quadruple-stranded assemblies. The considered MSAs have the general formula [Ln2L4]2- and possess a cavity suitable to allocate guests. The analysis was focused on three different factors: the ligand rigidity and the steric hindrance, the presence of a guest inside the cavity, and the guest dimension. Three different quantum mechanical calculation set-ups (in vacuum, with the solvent, and with the solvent and the dispersion correction) were considered. Comparison between theoretical and experimental outcomes suggests that all calculations correctly estimated the most stable isomer, while the inclusion of the dispersion correction is mandatory to reproduce the geometrical parameters. General guidelines can be drawn: less rigid and less bulky is the ligand and less stable is the helicate, and the presence of a guest can strongly affect the isomerism leading to an inversion of the stability by increasing the guest size when the ligand is flexible.
Assuntos
Elementos da Série dos Lantanídeos , Isomerismo , Ligantes , Teoria Quântica , SolventesRESUMO
Some metals belonging to groups IV and V show a high permeability to hydrogen and have been studied as possible alternatives to palladium in membranes for hydrogen purification/separation in order to increase their sustainability and decrease their costs. However, to date, very few alloys among those metals have been investigated, and no membrane studies based on 4-5 element alloys with low or zero Pd content and quasi-amorphous structure have been reported so far. In this work, new membranes based on ZrVTi- and ZrVTiPd alloys were tested for the first time for this application. The unprecedented deposition of micrometric-based multilayers was performed via high-power impulse magnetron sputtering onto porous alumina substrates. Dense Pd/ZrxVyTizPdw/Pd multilayers were obtained. The composition of the alloys, morphology and structure, hydrogen permeance, selectivity, and resistance to embrittlement were tested and analyzed depending on the deposition conditions, and the membrane with the enhanced performance was tuned. The environmental impact of these membranes was also investigated to ascertain the sustainability of these alloys relative to more common Pd77Ag23 and V93Pd7 thin-film membranes using a life cycle assessment analysis. The results showed that the partial substitution of Pd can efficiently lead to a decrease in the environmental impacts of the membranes.
RESUMO
The use of alkynyl gold(I) complexes covers different research fields, such as bioinorganic chemistry, catalysis, and material science, considering the luminescent properties of the complexes. Regarding this last application, we report here the synthesis of three novel dinuclear gold(I) complexes of the general formula [(diNHC)(Au-C≡CPh)2]: two Au-C≡CPh units are connected by a bridging di(N-heterocyclic carbene) ligand, which should favor the establishment of semi-supported aurophilic interactions. The complexes can be easily synthesized through mechanochemistry upon reacting the pristine dibromido complexes [(diNHC)(AuBr)2] with phenylacetylene and KOH. Interestingly, we were also able to isolate the monosubstituted complex [(diNHC)(Au-C≡CPh)(AuBr)]. The gold(I) species were fully characterized by multinuclear NMR spectroscopy and mass spectrometry. The emission properties were also evaluated, and the salient data are comparable to those of analogous compounds reported in the literature.
Assuntos
Complexos de Coordenação/química , Ouro/química , Luminescência , Acetileno/análogos & derivados , Acetileno/química , Dibrometo de Etileno/química , Hidróxidos/química , Ligantes , Espectroscopia de Ressonância Magnética , Espectrometria de Massas , Compostos de Potássio/químicaRESUMO
The molecular wheel [Cr10(OMe)20(O2CCMe3)10], abbreviated {Cr10}, with an unusual intermediate total spin S = 9 and non-negligible cluster anisotropy, D/kB = -0.045(2) K, is a rare case among wheels based on an even number of 3d-metals, which usually present an antiferromagnetic (AF) ground state (S = 0). Herein, we unveil the origin of such a behavior. Angular magnetometry measurements performed on a single crystal confirmed the axial anisotropic behavior of {Cr10}. For powder samples, the temperature dependence of the susceptibility plotted as χT(T) showed an overall ferromagnetic (FM) behavior down to 1.8 K, whereas the magnetization curve M(H) did not saturate at the expected 30 µB/fu for 10 FM coupled 3/2 spin Cr3+ ions, but to a much lower value, corresponding to S = 9. In addition, the X-ray magnetic circular dichroism (XMCD) measured at high magnetic field (170 kOe) and 7.5 K showed the polarization of the cluster moment up to 23 µB/fu. The magnetic results can be rationalized within a model, including the cluster anisotropy, in which the {Cr10} wheel is formed by two semiwheels, each with four Cr3+ spins FM coupled (JFM/kB = 2.0 K), separated by two Cr3+ ions AF coupled asymmetrically (J23/kB = J78/kB = -2.0 K; J34/kB = J89/kB = -0.25 K). Inelastic neutron scattering and heat capacity allowed us to confirm this model leading to the S = 9 ground state and first excited S = 8. Single-molecule magnet behavior with an activation energy of U/kB = 4.0(5) K in the absence of applied field was observed through ac susceptibility measurements down to 0.1 K. The intriguing magnetic behavior of {Cr10} arises from the detailed asymmetry in the molecule interactions produced by small-angle distortions in the angles of the Cr-O-Cr alkoxy bridges coupling the Cr3+ ions, as demonstrated by ab initio and density functional theory calculations, while the cluster anisotropy can be correlated to the single-ion anisotropies calculated for each Cr3+ ion in the wheel.
RESUMO
SPIDER is the 100 keV full-size Negative Ion Source prototype of the ITER Neutral Beam Injector, operating at Consorzio RFX in Padova, Italy. The largest Negative Ion Source in the world, SPIDER generates an RF driven plasma from which Deuterium or Hydrogen negative ions are produced and extracted. At the end of 2021, a scheduled long-term shutdown started to introduce major modifications and improvements aiming to solve issues and drawbacks identified during the first three years of SPIDER operations. The first action of the shutdown period was the disassembly and characterization of the SPIDER beam source after removal from the vacuum vessel and its placement inside the clean room. Each component was carefully assessed and catalogued, following a documented procedure. Some source components, i.e., the Plasma Grid, Extraction Grid and Bias Plate, revealed the presence of different and non-uniform red, white and green coatings that might be correlated to back-streaming positive ions impinging on grid surfaces, electrical discharges and caesium evaporation. Thus, several analyses have been carried out to understand the nature of such coatings, with the study still ongoing. The evidence of caesium evaporation and deposition on molybdenum-coated SPIDER components, such as the formation of oxides and hydroxides, is demonstrated through surface characterization analyses with the use of the Scanning Electron Microscope (SEM), X-ray Diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS).
RESUMO
Mononuclear rare-earth tris-ß-diketonato complexes RE(tta)3dme [RE = Y (1), La (2), Dy (3), or Eu (4); Htta = 2-thenoylacetone; dme = 1,2-dimethoxyethane] react cleanly at room temperature in a 1:1 molar ratio with the heteroditopic divergent ligand 4'-(4-pyridyl)-2,2':6',2â³-terpyridine N-oxide (pyterpyNO) to yield RE2(tta)6(pyterpyNO)n, where n = 2 for RE = Y (5), Dy (6), or Eu (7) and n = 3 for RE = La (8). The crystal structure of 5 revealed a dinuclear compound with two pyterpyNO's bridging through the oxygen atom in a hypodentate mode leaving the terpyridine moieties uncoordinated. Using a metal:pyterpyNO molar ratio of 2 for RE = Y (9), Dy (10), or Eu (11), it was possible to isolate the molecular complexes RE4(tta)12(pyterpyNO)2, while using a 5:3 molar ratio, the product La5(tta)12(pyterpyNO)3 (12) can be obtained. 89Y nuclear magnetic resonance spectroscopy revealed two different yttrium centers at room temperature for 9. An X-ray diffraction study of 10 showed a symmetrical tetranuclear structure resulting from the coordination of two Dy(tta)3 fragments to the two hypodentate terpyridines of the dinuclear unit and presenting two different coordination sites for metals with coordination numbers of 8 and 9. Magnetic studies of 6 and 10 revealed the presence of an antiferromagnetic interaction between the two Dy(III) atoms bound by the NO bridges. These compounds displayed a slow relaxing magnetization through Orbach (6) and Raman (10) processes in the absence of an applied magnetic field; the rate increased upon application of a 1 kOe field. 7 and 11 showed a bright red emission typical of Eu3+. The two complexes have similar emission properties mainly determined by the employed ß-diketonato ligands.
RESUMO
Two homometallic Coordination Polymers (CPs) with composition [Ln(hfac)3bipy]n (Ln3+ = Eu3+, 1, and Tb3+, 2; hfac = hexafluoroacetylacetonato, bipy = 4,4'-bipyridine) were used to develop a family of ratiometric luminescent thermometers containing Eu3+ and Tb3+ as red and green emitters, respectively. The thermometric properties of pure CPs and of their mixtures having an Eu3+/Tb3+ molar ratio of 1:1, 1:3, 1:5, and 1:10 (samples: Eu1Tb1, Eu1Tb3, Eu1Tb5, and Eu1Tb10) were studied in the 83-383 K temperature range. Irrespective of the chemical composition, we observed similar thermometric responses characterized by broad applicative temperature ranges (from 100 to 165 K wide), and high relative thermal sensitivity values (Sr), up to 2.40% K-1, in the physiological temperature range (298-318 K). All samples showed emissions endowed with peculiar and continuous color variation from green (83 K) to red (383 K) that can be exploited to develop a colorimetric temperature indicator. At fixed temperature, the color of the emitted light can be tuned by varying composition and excitation wavelength.
RESUMO
A series of Gd3+ complexes (Gd1-Gd3) with the general formula GdL3(EtOH)2, where L is a ß-diketone ligand with polycyclic aromatic hydrocarbon substituents of increasing size (1-3), was studied by combining time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy and DFT calculations to rationalize the anomalous spectroscopic behavior of the bulkiest complex (Gd3) through the series. Its faint phosphorescence band is observed only at 80 K and it is strongly red-shifted (â¼200 nm) from the intense fluorescence band. Moreover, the TR-EPR spectral analysis found that triplet levels of 3/Gd3 are effectively populated and have smaller |D| values than those of the other compounds. The combined use of zero-field splitting and spin density delocalization calculations, together with spin population analysis, allows us to explain both the large red shift and the low intensity of the phosphorescence band observed for Gd3. The large red shift is determined by the higher delocalization degree of the wavefunction, which implies a larger energy gap between the excited S1 and T1 states. The low intensity of the phosphorescence is due to the presence of C-H groups which favor non-radiative decay. These groups are present in all complexes; nevertheless, they have a relevant spin density only in Gd3. The spin population analysis on NaL models, in which Na+ is coordinated to a deprotonated ligand, mimicking the coordinative environment of the complex, confirms the outcomes on the free ligands.
RESUMO
ZnO is a worldwide used activator for a rubber vulcanization process, which promotes fast curing kinetics and high cross-linking densities of rubber nanocomposites (NCs). However, its extended use together with leaching phenomena occurring during the production and life cycle of rubber products, especially tires, entails potential environmental risks, as ecotoxicity toward aquatic organisms. Pushed by this issue, a novel activator was developed, which introduces highly dispersed and active zinc species in the vulcanization process, reducing the amount of employed ZnO and keeping high the curing efficiency. The activator is constituted by Zn(II) single sites, anchored on the surface of SiO2 nanoparticles (NPs) through the coordination with functionalizing amino silane groups. It behaves as a double-function material, acting at the same time as a rubber reinforcing filler and a curing activator. The higher availability and reactivity of the single-site Zn(II) centers toward curative agents impart faster kinetics and higher efficiency to the vulcanization process of silica/isoprene NCs, compared to conventionally used ZnO activators. Moreover, the NCs show a high cross-linking degree and improved dynamic mechanical properties, despite the remarkably lower amount of zinc employed than that normally used for rubber composites in tires. Finally, the structural stability of Zn(II) single sites during the curing reactions and in the final materials may represent a turning point toward the elimination of zinc leaching phenomena.
RESUMO
A combined Tof-SIMS, XPS and STM characterization has been performed to study the deposition of a sulphur-functionalized nitronyl nitroxide radical on Au(111) clearly demonstrating the chemisorption of intact molecules. Continuous -wave EPR characterization showed that the radical molecules maintain their paramagnetic character. Pulsed EPR measurements allowed to determine the decoherence time of the nanostructure at 80 K, which turned out to be comparable to the one measured in frozen solution and longer than previously reported for many radicals and other paramagnetic molecules at much lower temperatures. Furthermore, we conducted a state-of-the-art ab initio molecular dynamics study, suggesting different possible scenarios for chemisorption geometries and predicting the energetically favoured geometry. Calculation of the magnetic properties indicates a partial non-innocent role of the gold surface in determining the magnetic interactions between radicals in packed structures. This suggests that the observed EPR spectrum is to be attributed to low-density domains of disordered radicals interacting via dipolar interactions.
RESUMO
A theoretical protocol combining density functional theory (DFT) and multireference (CAS) calculations is proposed for a Eu3+ complex. In the complex, electronic levels of the central Eu3+ ion are correctly calculated at the CASPT2 level of theory, and the effect of introducing different numbers of states in the configuration interaction matrices is highlighted as well as the shortcomings of DFT methods in the treatment of systems with high spin multiplicity and strong spin-orbit coupling effects. For the 5D0 state energy calculation, the inclusion of states with different multiplicity and the number of states considered for each multiplicity are crucial parameters, even if their relative weight is different. Indeed, the addition of triplet and singlets is important, while the number of states is relevant only for the quintets. The herein proposed protocol enables a rigorous, full ab initio treatment of Eu3+ complex, which can be easily extended to other Ln3+ ions.
RESUMO
A family of homodinuclear Ln3+ (Ln3+ = Gd3+, Eu3+) luminescent complexes with the general formula [Ln2(ß-diketonato)6(N-oxide)y] has been developed to study the effect of the ß-diketonato and N-oxide ligands on their thermometric properties. The investigated complexes are [Ln2(tta)6(pyrzMO)2] (Ln = Eu (1·C7H8), Gd (5)), [Ln2(dbm)6(pyrzMO)2] (Ln = Eu (2), Gd (6)), [Ln2(bta)6(pyrzMO)2] (Ln = Eu (3), Gd (7)), [Ln2(hfac)6(pyrzMO)3] (Ln = Eu (4), Gd (8)) (pyrzMO = pyrazine N-oxide, Htta = thenoyltrifluoroacetone, Hdbm = dibenzoylmethane, Hbta = benzoyltrifluoroacetone, Hhfac = hexafluoroacetylacetone, C7H8 = toluene), and their 4,4'-bipyridine N-oxide (bipyMO) analogues. Europium complexes emit a bright red light under UV radiation at room temperature, whose intensity displays a strong temperature (T) dependence between 223 and 373 K. This remarkable variation is exploited to develop a series of luminescent thermometers by using the integrated intensity of the 5D0 â 7F2 europium transition as the thermometric parameter (Δ). The effect of different ß-diketonato and N-oxide ligands is investigated with particular regard to the shape of thermometer calibration (Δ vs T) and relative thermal sensitivity curves: i.e.. the change in Δ per degree of temperature variation usually indicated as Sr (% K-1). The thermometric properties are determined by the presence of two nonradiative deactivation channels, back energy transfer (BEnT) from Eu3+ to the ligand triplet levels and ligand to metal charge transfer (LMCT). In the complexes bearing tta and dbm ligands, whose triplet energy is ca. 20000 cm-1, both deactivation channels are active in the same temperature range, and both contribute to determine the thermometric properties. Conversely, with bta and hfac ligands the response of the europium luminescence to temperature variation is ruled by LMCT channels since the high triplet energy (>21400 cm-1) makes BEnT ineffective in the investigated temperature range.