Spectrum of Pathogens in Surgical Site Infections after Sarcoma Resection in the Peri-Pelvic and Pelvic Region. Distinct Location, Distinct Infection?

Background: Soft tissue sarcomas (STS) often occur in the peri-pelvic region (proximal thigh, groin, gluteal region). A common complication following resection of STS is surgical site infection (SSI). The peri-pelvic site appears to be particularly problematic. Surgical site infections are associated with a high proportion of gram-negative and anaerobic micro-organisms. To date, there are no published recommendations for peri-operative antibiotic prophylaxis in pelvic STS resection. Therefore, the aim of this study was to determine the rate of SSI and the spectrum of micro-organisms detected in this region. Methods: In this monocentric study, 366 patients were retrospectively evaluated. All of these patients had undergone surgery for STS in the peri-pelvic and pelvic regions. Surgical site infections were recorded, and the microbial spectrum was analyzed. Results: There were 85 (23.2%) patients with SSI, and 188 revisions were required in these patients (2.21 per case). Swabs were sterile in 20% of clinically infected cases. In total, 36.5% of infections were polymicrobial. The most common bacteria were coagulase-negative staphylococci in 31.5%, followed by Enterococcus species in 13.3% and Escherichia coli in 7.7%. In total, 30.8% of the bacteria were gram-negative and 25.9% were anaerobic. Conclusions: Our results demonstrate the uniqueness of the bacterial spectrum of SSI after STS resection in the peri-pelvic region. In the authors' opinion, recommendations regarding the peri-operative antibiotic prophylaxis need to be adapted for the typical microbial spectrum at this site.

Advances in implants and bone graft types for lumbar spinal fusion surgery.

The increasing prevalence of spinal disorders worldwide necessitates advanced treatments, particularly interbody fusion for severe cases that are unresponsive to non-surgical interventions. This procedure, especially 360° lumbar interbody fusion, employs an interbody cage, pedicle screw-and-rod instrumentation, and autologous bone graft (ABG) to enhance spinal stability and promote fusion. Despite significant advancements, a persistent 10% incidence of non-union continues to result in compromised patient outcomes and escalated healthcare costs. Innovations in lumbar stabilisation seek to mimic the properties of natural bone, with evolving implant materials like titanium (Ti) and polyetheretherketone (PEEK) and their composites offering new prospects. Additionally, biomimetic cages featuring precisely engineered porosities and interconnectivity have gained traction, as they enhance osteogenic differentiation, support osteogenesis, and alleviate stress-shielding. However, the limitations of ABG, such as harvesting morbidities and limited fusion capacity, have spurred the exploration of sophisticated solutions involving advanced bone graft substitutes. Currently, demineralised bone matrix and ceramics are in clinical use, forming the basis for future investigations into novel bone graft substitutes. Bioglass, a promising newcomer, is under investigation despite its observed rapid absorption and the potential for foreign body reactions in preclinical studies. Its clinical applicability remains under scrutiny, with ongoing research addressing challenges related to burst release and appropriate dosing. Conversely, the well-documented favourable osteogenic potential of growth factors remains encouraging, with current efforts focused on modulating their release dynamics to minimise complications. In this evidence-based narrative review, we provide a comprehensive overview of the evolving landscape of non-degradable spinal implants and bone graft substitutes, emphasising their applications in lumbar spinal fusion surgery. We highlight the necessity for continued research to improve clinical outcomes and enhance patient well-being.

Vitamin D Deficiency Is Frequent in Patients with Rapidly Destructive Osteoarthritis-Data from a Single-Center Analysis.

BACKGROUND: Rapidly destructive osteoarthritis (RDO) of the hip joint is characterised by the rapid destruction of the femoral head with or without acetabular involvement. There has been increasing interest in this disease over the past years; however, the entity is still poorly understood, and its pathophysiology remains unknown. Yet, there is ample evidence today that increased bone metabolism might play a role in the onset and progression of the disease. Vitamin D is of utmost importance to maintain a balanced bone metabolism. However, whether vitamin D deficiency is involved in disease development remains to be elucidated. Further, the vitamin D status of patients with RDO has not yet been analysed. For this reason, the objective of this study was to assess the vitamin D status of patients with RDO. Moreover, the aim was to clarify whether there is a difference in the vitamin D status of patients with RDO compared with patients with primary osteoarthritis (OA). METHODS: In this single-centre analysis, the 25(OH)D, PTH, and calcium levels of 29 patients who presented with RDO between 2020 and 2022 were assessed. RESULTS: Altogether, 97% of patients (28/29) were vitamin D deficient, a further 3% (1/29) were vitamin D insufficient, and not a single patient presented with a sufficient vitamin D status. Notably, the vitamin D levels of RDO patients (mean = 11.04 ng/mL) were significantly lower than the vitamin D levels of patients with OA (mean = 22.16 ng/mL, p = 0.001). CONCLUSION: In conclusion, we found a widespread and high rate of vitamin D deficiency in patients with RDO. Hence, we believe that 25(OH)D status should routinely be analysed in these patients.

Accuracy of Positioning and Risk Factors for Malpositioning Custom-Made Femoral Stems in Total Hip Arthroplasty-A Retrospective Multicenter Analysis.

Total hip arthroplasty (THA) is commonly performed using off-the-shelf implants. In the case of a severe mismatch between the anatomy of the proximal femur and the geometry of the stem, the use of custom-made stems might become necessary. The goal of this study was to investigate the precision of the implantation of custom-made stems of one manufacturer (CTX stem, AQ Implants) and to determine risk factors for malpositioning. All patients receiving a custom-made CTX stem between 2014 and 2020 at six high-volume academic centers were retrospectively recruited. The achieved position of the stem, as determined by stem version, stem coronal angle, and implantation depth on radiographs, was compared to the plan. The influence of radiographic and demographic parameters on the position was investigated. The results revealed a high variability of the achieved implant position in relation to the preoperative plan. While the stem coronal angle only differed slightly from the intended position, the stem version and the implantation depth showed a high frequency and amount of deviation. Right stems showed significantly higher positions than planned. Surgeons must be aware of this potential problem when implanting custom-made stems.

Efficacy of post-operative partial weight-bearing after total knee arthroplasty - a prospective observational trial.

PURPOSE: There is little evidence proving the concept of partial weight-bearing to be efficient and feasible. Using insole pressure measurement systems, this study aimed to explore the compliance to prescribed weight-bearing restrictions after total knee arthroplasty (TKA). METHODS: 50 patients after TKA were recruited in a prospective manner. They were advised to limit weight-bearing of the affected limb to 200 N. True load was measured via insole force-sensors on day one after surgery (M1) and before discharge (M2). Compliance to the rehabilitation protocol was the primary outcome parameter. RESULTS: At M1 and M2 compliance to the rehabilitation protocol was 0% und 2%, respectively. 84% (M1) and 90% (M2) of patients overloaded the affected limb during every step. The affected limb was loaded with 50% ± 14% (M1) and 57% ± 17% (M2) of body weight. Patients older than 65 loaded the affected limb on average 17% (M1) and 34% (M2) more than their younger counterparts did. This difference was even more pronounced when walking stairs up (49% increase on average) and down (53% increase on average). CONCLUSION: Surgeons must take into consideration that the ability to maintain partial weight-bearing after TKA is highly dependent on the age of the patient and the achievable load reduction is determined by the patient's body weight.

The Impact of Total Knee Replacement with a Customized Cruciate-Retaining Implant Design on Patient-Reported and Functional Outcomes.

PURPOSE: To treat patients with tricompartimental knee osteoarthritis (OA), a customized cruciate-retaining total knee arthroplasty (CCR-TKA) system can be used, including both individualized instrumentation and implants. The objective of this monocentric cohort study was to analyze patient-reported and functional outcomes in a series of patients implanted with the second generation of this customized implant. METHODS: At our arthroplasty center, we prospectively recruited a cohort of patients with tricompartmental gonarthrosis to be treated with total knee replacement (TKA) using a customized cruciate-retaining (CCR) implant design. Inclusion criteria for patients comprised the presence of intact posterior cruciate and collateral ligaments and a knee deformity that was restricted to <15° varus, valgus, or flexion contracture. Patients were assessed for their range of motion (ROM), Knee Society Score (KSS), Western Ontario and McMaster University osteoarthritis index (WOMAC), and short form (SF)-12 physical and mental scores, preoperatively, at 3 and 6 months, as well as at 1, 2, 3, and 5 years of follow-up (FU) postoperatively. RESULTS: The average age of the patient population was 64 years (range: 40-81), the average BMI was 31 (range: 23-42), and in total, 28 female and 45 male patients were included. Implant survivorship was 97.5% (one septic loosening) at an average follow-up of 2.5 years. The KSS knee and function scores improved significantly (p < 0.001) from, respectively, 41 and 53 at the pre-operative visit, to 92 and 86, respectively, at the 5-year post-operative time point. The SF-12 Physical and Mental scores significantly (p < 0.001) improved from the pre-operative values of 28 and 50, to 50 and 53 at the 5-year FU, respectively. Patients experienced significant improvements in their overall knee range of motion, from 106° at the preoperative visit to 122°, on average, 5 years postoperatively. The total WOMAC score significantly (p < 0.001) improved from 49.1 preoperatively to 11.4 postoperatively at 5-year FU. CONCLUSIONS: Although there was no comparison to other implants within this study, patients reported high overall satisfaction and improvement in functional outcomes within the first year from surgery, which continued over the following years. These mid-term results are excellent compared with those reported in the current literature. Comparative long-term studies with this device are needed. Level of evidence 3b (individual case-control study).

Custom Made Monoflange Acetabular Components for the Treatment of Paprosky Type III Defects.

PURPOSE: Patient-specific, flanged acetabular components are used for the treatment of Paprosky type III defects during revision total hip arthroplasty (THA). This monocentric retrospective cohort study analyzes the outcome of patients treated with custom made monoflanged acetabular components (CMACs) with intra- and extramedullary iliac fixation. METHODS: 14 patients were included who underwent revision THA with CMACs for the treatment of Paprosky type III defects. Mechanism of THA failure was infection in 4 and aseptic loosening in 10 patients. Seven patients underwent no previous revision, the other seven patients underwent three or more previous revisions. RESULTS: At a mean follow-up of 35.4 months (14-94), the revision rate of the implant was 28.3%. Additionally, one perioperative dislocation and one superficial wound infection occurred. At one year postoperatively, we found a significant improvement of the Western Ontario and McMaster Universities Arthritis Index (WOMAC) score (p = 0.015). Postoperative radiographic analysis revealed good hip joint reconstruction with a mean leg length discrepancy of 3 mm (-8-20), a mean lateralization of the horizontal hip center of rotation of 8 mm (-8-35), and a mean proximalization of the vertical hip center of rotation of 6 mm (13-26). Radiolucency lines were present in 30%. CONCLUSION: CMACs can be considered an option for the treatment of acetabular bone loss in revision THA. Iliac intra- and extramedullary fixation allows soft tissue-adjusted hip joint reconstruction and improves hip function. However, failure rates are high, with periprosthetic infection being the main threat to successful outcome.

Patient-specific cruciate-retaining total knee replacement with individualized implants and instruments (iTotal™ CR G2).

OBJECTIVE: Treatment of tricompartimental osteoarthritis (OA) using customized instruments and implants for cruciate-retaining total knee arthroplasty. Use of patient-specific instruments and implants (ConforMIS iTotalTM CR G2) together with a 3D-planning protocol (iView®). Retropatellar resurfacing is optional. INDICATIONS: Symptomatic tricompartmental OA of the knee (Kellgren-Lawrence stage IV) with preserved posterior cruciate ligament (PCL) after unsuccessful conservative or joint-preserving surgical treatment. CONTRAINDICATIONS: Knee ligament instabilities of the posterior cruciate or collateral ligaments. Infection. Relative contraindication: knee deformities >15° (varus, valgus, flexion); prior partial knee replacement. SURGICAL TECHNIQUE: Midline or parapatellar medial skin incision, medial arthrotomy; distal femoral resection with patient-specific cutting block; tibial resection using either a cutting jig for the anatomic slope or a fixed 5° slope. Balancing the knee in extension and flexion gap using patient-specific spacer. The final tibial preparation achieved with gap-balanced placement of the femoral cutting jigs. Kinematic testing using anatomic trial components. Final implant components are cemented in extension. Wound layers are sutured. Drainage is optional. POSTOPERATIVE MANAGEMENT: Sterile wound dressing; compressive bandage. No limitation of the active and passive range of motion. Optional partial weight bearing during the first 2 weeks, then transition to full weight bearing. Follow-up directly after surgery, at 12 and 52 weeks, then every 1-2 years. RESULTS: Overall 60 patients with tricompartmental knee OA and preserved PCL were treated. Mean age was 66 (range 45-76) years. Minimum follow-up was 12 months. There was 1 septic revision after a low-grade infection, 1 reoperation to replace the patellar due to patellar osteoarthritis and 3 manipulations under anesthesia (MUAs) to increase range of motion. Radiographic analyses demonstrated an ideal implant fit with less than 2 mm subsidence or overhang. The WOMAC score improved from 154.8 points preoperatively to 83.5 points at 1 year and 59.3 points at 2 years postoperatively. The EuroQol-5D Score also improved from 11.1 points preoperatively to 7.7 points at 1 year postoperatively.

Does vitamin D deficiency predict tumour malignancy in patients with bone tumours? Data from a multi-center cohort analysis.

Vitamin D deficiency is a global health concern that is estimated to afflict over one billion people globally. The major role of vitamin D is that of a regulator of calcium and phosphate metabolism, thus, being essential for proper bone mineralisation. Concomitantly, vitamin D is known to exert numerous extra-skeletal actions. For example, it has become evident that vitamin D has direct anti-proliferative, pro-differentiation and pro-apoptotic actions on cancer cells. Hence, vitamin D deficiency has been associated with increased cancer risk and worse prognosis in several malignancies. We have recently demonstrated that vitamin D deficiency promotes secondary cancer growth in bone. These findings were partly attributable to an increase in bone remodelling but also through direct effects of vitamin D on cancer cells. To date, very little is known about vitamin D status of patients with bone tumours in general. Thus, the objective of this study was to assess vitamin D status of patients with diverse bone tumours. Moreover, the aim was to elucidate whether or not there is an association between pre-diagnostic vitamin D status and tumour malignancy in patients with bone tumours. In a multi-center analysis, 25(OH)D, PTH and calcium levels of 225 patients that presented with various bone tumours between 2017 and 2018 were assessed. Collectively, 76% of all patients had insufficient vitamin D levels with a total mean 25(OH)D level of 21.43 ng/ml (53.58 nmol/L). In particular, 52% (117/225) of patients were identified as vitamin D deficient and further 24% of patients (55/225) were vitamin D insufficient. Notably, patients diagnosed with malignant bone tumours had significantly lower 25(OH)D levels than patients diagnosed with benign bone tumours [19.3 vs. 22.75 ng/ml (48.25 vs. 56.86 nmol/L); p = 0.04). In conclusion, we found a widespread and distressing rate of vitamin D deficiency and insufficiency in patients with bone tumours. However, especially for patients with bone tumours sufficient vitamin D levels seem to be of great importance. Thus, we believe that 25(OH)D status should routinely be monitored in these patients. Collectively, there should be an increased awareness for physicians to assess and if necessary correct vitamin D status of patients with bone tumours in general or of those at great risk of developing bone tumours.

Accurate implant fit and leg alignment after cruciate-retaining patient-specific total knee arthroplasty.

BACKGROUND: For improved outcomes in total knee arthroplasty (TKA) correct implant fitting and positioning are crucial. In order to facilitate a best possible implant fitting and positioning patient-specific systems have been developed. However, whether or not these systems allow for better implant fitting and positioning has yet to be elucidated. For this reason, the aim was to analyse the novel patient-specific cruciate retaining knee replacement system iTotal™ CR G2 that utilizes custom-made implants and instruments for its ability to facilitate accurate implant fitting and positioning including correction of the hip-knee-ankle angle (HKA). METHODS: We assessed radiographic results of 106 patients who were treated with the second generation of a patient-specific cruciate retaining knee arthroplasty using iTotal™ CR G2 (ConforMIS Inc.) for tricompartmental knee osteoarthritis (OA) using custom-made implants and instruments. The implant fit and positioning as well as the correction of the mechanical axis (hip-knee-ankle angle, HKA) and restoration of the joint line were determined using pre- and postoperative radiographic analyses. RESULTS: On average, HKA was corrected from 174.4° ± 4.6° preoperatively to 178.8° ± 2.2° postoperatively and the coronal femoro-tibial angle was adjusted on average 4.4°. The measured preoperative tibial slope was 5.3° ± 2.2° (mean +/- SD) and the average postoperative tibial slope was 4.7° ± 1.1° on lateral views. The joint line was well preserved with an average modified Insall-Salvati index of 1.66 ± 0.16 pre- and 1.67 ± 0.16 postoperatively. The overall accuracy of fit of implant components was decent with a measured medial overhang of more than 1 mm (1.33 mm ± 0.32 mm) in 4 cases only. Further, a lateral overhang of more than 1 mm (1.8 mm ± 0.63) (measured in the anterior-posterior radiographs) was observed in 11 cases, with none of the 106 patients showing femoral notching. CONCLUSION: The patient-specific iTotal™ CR G2 total knee replacement system facilitated a proper fitting and positioning of the implant components. Moreover, a good restoration of the leg axis towards neutral alignment was achieved as planned. Nonetheless, further clinical follow-up studies are necessary to validate our findings and to determine the long-term impact of using this patient- specific system.

Revision arthroplasty with rotating hinge systems for total knee arthroplasty instability.

OBJECTIVE: Restoring stability after total knee arthroplasty (TKA) and improving joint function using a cemented rotating hinge system. INDICATIONS: Ligament instability and/or osseous defects (including Anderson Orthopaedic Research Institute [AORI] classification type II defects) after primary TKA or TKA revision surgery. CONTRAINDICATIONS: Distal femoral or proximal tibial bowing requiring implant systems that provide femoral or tibial offset stems. Persistent periprosthetic infection. Poor therapeutic compliance. AORI type III defects. SURGICAL TECHNIQUE: Medial arthrotomy. Femoral and tibial component removal with small saw blades and chisels. Intramedullary alignment for the tibial and femoral cuts. Debridement and removal of membranes and cement remnants. Reconstruction of joint line and correct TKA alignment. Trial reduction. Cement fixation. POSTOPERATIVE MANAGEMENT: Unrestricted range of motion, partial weight bearing for 4 weeks. RESULTS: Between 2012 and 2013, 18 patients suffering from ligament insufficiency after TKA were revised using the described system and included in a prospective study protocol. The mean follow-up was 37 months (range 30-46 months). There was a significant improvement of the Oxford Knee Score (OKS) from 19 (range 7-29) preoperatively to 29 (range 10-45) postoperatively (p = 0.004). The Knee Society Score (KSS) knee assessment subscore improved from 35 (range 9-70) to 67 (range 35-97) (p = 0.002) and the pain score from 7 (range 0-50) to 24 (range 0-50) (p = 0.008).

Revision of unicompartmental knee arthroplasty using the in situ referencing technique.

OBJECTIVE: Revision of unicompartmental knee arthroplasty (UKA) to total knee arthroplasty (TKA) with the in situ referencing technique aiming to preserve as much ligament function and epi-metaphyseal bone stock as possible. INDICATIONS: Aseptic loosening, progression of osteoarthritis, periprosthetic fracture, periprosthetic infection, arthrofibrosis, polyethylene wear, malalignment, instability, femoro-tibial impingement. CONTRAINDICATIONS: Unexplained pain, localized or systemic active infection (anywhere). SURGICAL TECHNIQUE: Referencing for the tibia and the femur cuts is performed prior to implant removal. The tibial cutting jig and the initial tibial resection level is set in a way that the sawblade just fits under the tibial implant. In case too much bone needs to be removed to achieve flush implant sitting on both the medial and lateral tibia, a step cut needs to be performed to build up the medial defect with an augment. Prior to femoral component removal, rotational alignment is determined and intramedullary referencing for the distal femur osteotomy is performed. Level of constraint and additional tibial stem fixation is chosen according to the amount of bone resected and according to ligament stability. POSTOPERATIVE MANAGEMENT: Sterile dressings and elastic compression bandaging. No limitation of active/passive range of motion. Full weight-bearing or partial weight-bearing for 2 weeks postoperatively in the presence of bone or soft tissue defects. RESULTS: Between 2008 and 2019, 84 patients underwent revision of unicompartmental knee arthroplasty. The mean follow-up was 64 months (range 3-132 months). Implant survival after revision of UKA to TKA was 92% (95% CI = 82-97%) at 5 years of follow-up and 86% (95% CI = 69-93%) at 10 years of follow-up. The mean Oxford knee score was 20.1 (6-39, SD ± 6.5) preoperatively and 30.2 (3-48, SD ± 11.3) postoperatively. The mean visual analogue scale was 6.9 (range 1-10, SD ± 1.8) preoperatively and 3.9 (range 0-9, SD ± 2.6) postoperatively.

Total Hip Arthroplasty After Spinal Fusion Surgery. / Hüftendoprothetik nach Wirbelsäulenfusion.

Given the close functional connection between the hip and the spine, their simultaneous degenerative pathology is a common problem seen in orthopedic patients and has been termed the "hip spine syndrome". Demographic change and an increasing number of operations have led to more patients who have undergone both total hip arthroplasty and spondylodesis especially of the lumbar spine. Studies have shown significant dislocation rates in this cohort of as high as almost 30%. Biomechanical studies and considerations show that spinal surgery directly influences the functional acetabular position and, consequently, the position of the acetabular cup, making the correct implantation challenging for the hip surgeon. Spinal fusion affects not only the biomechanics of the spine but also of the hip joint and, for that reason, must accordingly be taken into account when planning total hip arthroplasty.

Vitamin D Deficiency in Patients With Idiopathic and Traumatic Osteochondritis Dissecans of the Talus.

BACKGROUND: Low vitamin D levels are common in patients with foot and ankle disorders. We have previously demonstrated that juveniles diagnosed with osteochondritis dissecans (OCD) have a high prevalence of vitamin D deficiency. Moreover, there is evidence that OCD might be related to vitamin D deficiency in general. However, whether or not hypovitaminosis D is associated with OCD of the talus has yet to be elucidated. METHODS: The aim of this study was to determine serum vitamin D levels [25(OH)D] of patients diagnosed with traumatic and idiopathic OCD of the talus. The vitamin D status of patients was measured and correlated to age, sex, season, etiology, laterality, degree of disease, and nicotine abuse. Moreover, parathyroid hormone and serum calcium levels of patients were obtained to assess for severe vitamin D deficiency and secondary hyperparathyroidism. Between January 2015 and December 2017, 65 patients with a mean age of 38.9 years and a total of 68 lesions were identified. RESULTS: In total, 75.4% of patients had low vitamin D levels with a mean overall 25(OH)D level of 24.2 ng/mL. Specifically, 35.4% of patients were vitamin D deficient; another 40% were vitamin D insufficient, and only 24.6% of patients presented with sufficient vitamin D levels. Statistical analysis showed no significant difference comparing vitamin D levels of patients with idiopathic OCD to patients with traumatic OCD. CONCLUSION: We could not find any significant differences in the vitamin D status of patients with OCD of the talus compared with patients with foot and ankle disorders in general. However, we found that vitamin D deficiency was frequent in patients presenting with traumatic and idiopathic OCD of the talus. We believe it might be beneficial to routinely assess and treat the vitamin D status of patients. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

The Mayo conservative hip: complication analysis and management of the first 41 cases performed at a University level 1 department.

BACKGROUND: To prevent bone loss in hip arthroplasty, several short stem systems have been developed, including the Mayo conservative hip system. While there is a plethora of data confirming inherent advantages of these systems, only little is known about potential complications, especially when surgeons start to use these systems. METHODS: In this study, we present a retrospective analysis of the patients' outcome, complications and the complication management of the first 41 Mayo conservative hips performed in 37 patients. For this reason, functional scores, radiographic analyses, peri- and postoperative complications were assessed at an average follow-up of 35 months. RESULTS: The overall HHS improved from 61.2 pre-operatively to 85.6 post-operatively. The German Extra Short Musculoskeletal Function Assessment Questionnaire (XSFMA-D) improved from 30.3 pre-operatively to 12.2 post-operatively. The most common complication was an intraoperative non-displaced fracture of the proximal femur observed in 5 cases (12.1%). Diabetes, higher BMI and older ages were shown to be risk factors for these intra-operative periprosthetic fractures (p < 0.01). Radiographic analysis revealed a good offset reconstruction in all cases. CONCLUSION: In our series, a high complication rate with 12.1% of non-displaced proximal femoral fractures was observed using the Mayo conservative hip. This may be attributed to the flat learning curve of the system or the inherent patient characteristics of the presented cohort.

[Total knee arthroplasty. Patient-specific instruments and implants]. / Totalendoprothetischer Kniegelenksersatz. Patientenspezifische Instrumente und Implantate.

This article describes the concept and surgical technique of patient-specific total knee arthroplasty. Patient-specific implants and instruments are designed and fabricated based on computed tomography (CT) data of the leg. The disposable patient-specific drill guides and cutting-jigs are manufactured taking into consideration the anatomical and biomechanical axes of the knee joint and mediating the efficient pre-navigation of the osseous saw-cuts, without the need for additional navigation or balancing aids. The surgical plan is made on the basis of the CT data. The implantation technique comprises the following steps: distal femoral resection, tibial resection, balancing and femur preparation, tibia preparation, optional patellar resurfacing, trialling of the test components, and implantation of the final components. By using this patient-specific implant system, which includes not only personalized, single-use instruments, but also individualized implants, the surgeon is able to provide endoprosthetic treatment that broadly restores the patient's own knee anatomy and knee kinematics. Preliminary studies have proven the concept and data on this technology are promising so far; however, like a new implant, they are usually limited. In particular, comparative long-term clinical data are still to come.