Carbon Nanotube-Polyurethane Composite Sheets for Flexible Thermoelectric Materials.

Integration of single-wall carbon nanotubes (SWCNTs) in the form of fabriclike sheets or other preformed assemblies (films, fibers, etc.) simplifies their handling and allows for composites with higher nanotube contents, which is needed to better exploit their outstanding properties and achieve multifunctional materials with improved performance. Here, we show the development of p-type SWCNT-thermoplastic polyurethane (TPU) fabric materials with a wide range of SWCNT contents (from 5 to 90 wt %) by employing a one-step filtration method using a suspension of SWCNTs in a TPU solvent/nonsolvent mixture. The mechanical and thermoelectric (TE) properties of these SWCNT-TPU nanocomposites were tailored by varying the SWCNT/TPU wt % ratio, achieving significant advantages relative to the pristine SWCNT buckypaper (BP) sheets in terms of strength and stretchability. In particular, the SWCNT-TPU nanocomposite with a 50/50 wt % ratio composition (equivalent to 15 vol % of SWCNTs) shows a power factor (PF) of 57 µW m-1 K-2, slightly higher compared to the PF of the SWCNT BP prepared under the same conditions (54 µW m-1 K-2), while its mechanical properties significantly increased (e.g., ∼7-, 25-, and 250-fold improvements in stiffness, strength, and tensile toughness, respectively). These results represent a significant step toward the development of easy-to-process self-supporting and stretchable materials with robust mechanical properties for flexible thermoelectric devices.

Electrospun Nanofibrous Biocomposite of Royal Jelly/Chitosan/Polyvinyl Alcohol (RJ/CS/PVA) Gel as a Biological Dressing for P. aeruginosa-Infected Burn Wound.

Burn wounds are vulnerable to various infections due to damage to the tissue and changes in immune responses. Pseudomonas aeruginosa is a critical bacterium that can cause burn wound infections, which can be life-threatening and delay wound healing. Therefore, it is essential to develop an efficient strategy to prevent the spread of infection in burn wounds. The present study aims to investigate the effectiveness of electrospun nanofibers of royal jelly on a chitosan/polyvinyl alcohol polymer scaffold in repairing burn wounds infected with Pseudomonas aeruginosa. To achieve this, the researchers analyzed the morphology and physicochemical properties of the synthesized nanofibers using SEM, FTIR, BET, and TGA analyses. They also examined the antibacterial properties of the nanofibers using agar diffusion and spread plate techniques. In addition, hemolysis tests were carried out to assess biocompatibility. Finally, the ability of the nanofibers to repair burn wounds infected with Pseudomonas aeruginosa was evaluated using a laboratory mouse model. The study results showed that the synthesized nanofibers had desirable morphology and physicochemical properties and significant antibacterial effects in both in vitro and in vivo conditions. Also, loading RJ into the polymer scaffold significantly reduced erythrocyte lysis. The wound healing and contraction rates were significantly higher than the control groups, and tissue repair, re-epithelialization, and collagen synthesis occurred faster, preventing the spread of infection to deeper tissue areas. Based on these findings, the synthesized system has the potential to serve as a suitable substitute for some invasive treatments and chemical drugs to improve chronic wounds and manage infection control in burn injuries.

Molecular Epidemiology and Recycling of Staphylococcus aureus Resistant to Methicillin Among the Staff, Patients, and Surfaces in University Hospital in West Iran, Ilam.

BACKGROUND: Staphylococcus aureus is a human pathogen causing nosocomial infections and increased hospitalization and mortality among human communities. Methicillin-resistant S. aureus strains are considered a severe threat in nosocomial infections and cause complications in the remedy process of bacterial infections. In this study, 137 samples were collected from different departments, staff, and patients in Ilam hospital. METHODS: Eighty-eight samples of these strains were examined to test antibiotic resistance and diffusion. MIC (minimum inhibitory concentration) and PCR (polymerase chain reaction) were performed on the samples resistant to oxacillin. 36 (40.9%) strains were MRSA, and 52 (59.1%) isolates were MSSA. 44.4% of MRSA strains with IV SCCmec type. RESULTS: Fourteen different spa types were found using spa typing, of which the most abundant types were t037, t030, and t701, and three new types, including t15471, t15474, and t17470, were identified among the strains. The molecular analysis by MLST showed that the strains are classified into 11 different sequence types. Sequence type 239 and clonal complexes of 329 and 22 were dominant. ST239- spat037-SCCmec III was also identified as the most frequent clone of MRSA. The most identified clones were MRSA ST239-spa t037-SCCmec III. CONCLUSION: The results show the spa-type distribution between samples of patients, personnel, and surfaces, demonstrating MRSA circulation between patients and the environment. The results show the need to control environmental health.

Biosynthesis of titanium dioxide nanoparticles using Hypericum perforatum and Origanum vulgare extracts and their main components, hypericin and carvacrol as promising antibacterial agents.

OBJECTIVE: To evaluate the anti-bacterial activities of titanium dioxide (TiO) nanoparticles of Origanum (O.) vulgare and Hypericum (H.) perforatum extracts, carvacrol and hypericin against Staphylococcus (S.) aureus. METHODS: In this study, TiOnanoparticles of O. vulgare and H. perforatum extracts, carvacrol and hypericin, were prepared and their antibacterial effects were evaluated against Staphylococcus (S.) aureus. In this study, scanning electron microscope, fourier transform infrared spectrometer, atomic force microscopy, dynamic light scattering and zeta potential were used to investigate the structure of synthesized drugs. RESULTS: Anti-bacterial activity of synthesized NPs was tested by minimum inhibitory concentration (MIC), minimum bactericidal concentration and disc diffusion method. MICs of TiO-NPs synthesized using O. vulgare, H. perforatum, carvacrol and hypericin and TiO were obtained 250, 62.5, 250, and 250, and 500 µg/mL, respectively. The MBCs for all of these were obtained 1000 µg/mL. CONCLUSION: Green-synthesized of TiO nanoparticles provides a promising approach to the use of O. vulgare and H. perforatum, carvacrol and hypericin as novel agents and safer antibacterial compounds, especially anti-S. aureus compounds.

Glass Fiber-Epoxy Composites with Boron Nitride Nanotubes for Enhancing Interlaminar Properties in Structures.

Hybrid composite materials are a class of materials where more than one type of reinforcement is integrated into a matrix to achieve superior properties. This typically involves nanoparticle fillers employed within traditional advanced composites with fiber reinforcements such as carbon or glass. The current study builds on previous investigations of boron nitride nanotube (BNNT) hybrid composites, specifically glass fiber (GF)-epoxy/BNNT composite laminates. GF is an effective and affordable primary reinforcement fiber in many applications, and boron nitride nanotubes (BNNTs) exhibit impressive mechanical properties comparable to carbon nanotubes (CNTs) with distinct functional properties, such as electrical insulation, which is desirable in manufacturing insulating composites when combined with GF. GF-epoxy/BNNT composite laminates, incorporating BNNT materials with different loadings (1 and 2 wt %) and purity, were manufactured using a hand layup technique and prepared for three-point bending, modified Charpy, dynamic mechanical analysis (DMA), and fracture toughness (mode I and mode II) measurements. A comprehensive microscopy study was also performed using scanning electron microscopy (SEM) showing prominent failure mechanism, nanotube dispersion, and their mode of reinforcement in different loading scenarios. Enhanced properties, including a 43% increase in mode II fracture toughness, were observed in hybrid composites with 1 wt % BNNT compared to the GF composites with neat epoxy, and the reinforcement mechanisms were discussed.

A comparative study of nano-fillers to improve toughness and modulus of polymer-derived ceramics.

Brittleness is a major limitation of polymer-derived ceramics (PDCs). Different concentrations of three nanofillers (carbon nanotubes, Si3N4 and Al2O3 nanoparticles) were evaluated to improve both toughness and modulus of a commercial polysilazane (PSZ) PDC. The PSZs were thermally cross-linked and pyrolyzed under isostatic pressure in nitrogen. A combination of mechanical, chemical, density, and microscopy characterizations was used to determine the effects of these fillers. Si3N4 and Al2O3 nanoparticles (that were found to be active fillers) were more effective than nanotubes and improved the elastic modulus, hardness, and fracture toughness (JIC) of the PDC by ~ 1.5 ×, ~ 3 ×, and ~ 2.5 ×, respectively. Nanotubes were also effective in maintaining the integrity of the samples during pyrolysis. The modulus and hardness of PDCs correlated positively with their apparent density; this can provide a fast way to assess future PDCs. The improvement in fracture toughness was attributed to crack deflection and bridging observed in the micro-indentation cracks in the modified PDCs. The specific toughness of the modified PDCs was 4 × higher than that of high-purity alumina, and its specific modulus reached that of commercially available technical ceramics. These PDCs can also easily take different shapes and therefore are of interest in protective armor, propulsion, thermal protection, device packaging and biomaterial systems.

Encapsulation of Satureja khuzistanica jamzad essential oil in chitosan nanoparticles with enhanced antibacterial and anticancer activities.

Satureja khuzistanica jamzad (SKJ), which is a member of Lamiaceae, has various proven effects such as antispasmodic and anti-inflammatory, anti-diabetic, antioxidant, and antifungal properties. However, the use of essential oil of plants is limited due to their inherent instability in the environment. Encapsulation with nanoparticles in the nanogel forms is one of their stabilization methods. The aim of this study was to synthesize nano-gel based on chitosan (CS) and extracts of SKJ essential oil, and to evaluate the antibacterial and anticancer activities. SKJ essential oil was extracted using water distillation method. Then, it was loaded on CS particles using two-step process as following: droplets formation and freezing. The Dynamic Light Scattering (DLS), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Zeta potential determination were used to evaluate the physical and chemical properties of CS-SKJ nanogel, which its result was acceptable. After confirmation of the loaded essential oil rate and releasing amount, the antibacterial effects were evaluated on five Gram-positive bacteria and five Gram-negative bacteria using microbroth dilution method. The encapsulation efficiency, size, polydispersity index, and zeta potential of nanoparticles were characterized were 30.74%, 571.00 nm, 0.451 and -67.2 mV, respectively. The results were significant not only on Gram-positive bacteria, but also on Gram-negative bacteria. The MIC range was between 7.8 and 500 µg/ml. The CS-SKJ nanogel has acceptable anticancer activities on KB and A549 tumor cell lines. the IC50 range was between 5.6 and 6.71 µg/ml. The results indicate that both CS particles and SKJ alone, and CS-SKJ nanogel could be considered as the outlook to produce new antimicrobial and anticancer drugs.

First Report on the Characteristics of Methicillin-Resistant Staphylococcus Capitis Isolates and an NRCS-A-clone Related Isolate Obtained from Iranian Children.

BACKGROUND: Methicillin-resistant staphylococcus capitis (MRSC) NRCS-A clone (Multi- resistant and vancomycin-non susceptible) has been recently described as an emerging cause of nosocomial bacteremia, especially in neonatal intensive-care units (NICUs). OBJECTIVE: The objective of this study was to evaluate the antibiotic and antiseptic resistance patterns, biofilm-producing ability and the prevalence of SCCmec and ACME types among MRSC isolates as well as to check the possible presence of NRCS-A clone at Tehran's Children's Medical Center, Iran. METHODS: A total of 256 coagulase-negative Staphylococcal isolates were collected, of which 10 S. capitis isolates were obtained and tested for susceptibility against 13 antimicrobial and 3 antiseptic agents, as well as biofilm production. The presence of 15 distinct resistance genes, staphylococcal cassette chromosome mec (SCCmec), and arginine catabolic mobile elements (ACMEs) were tracked. RESULTS: Seven out of 10 S. capitis isolates were MRSC (MIC90 van=8µg/mL) and resistant to trimethoprim/sulfamethoxazole, produced biofilm, (3 as strong biofilm producers) and carried ACME types I and II. Despite the identification of mec and ccr complexes in some isolates, all the SCCmec cassettes were untypeable (UT). CONCLUSION: According to the studied features, only one isolate belonged to the NRSC-A clone. The results indicate that MRSC with high antibiotic resistance and unknown SCCmec might become a serious problem in the future for the treatment of patients, particularly children.

Biocompatibility, Cytotoxicity, Antimicrobial and Epigenetic Effects of Novel Chitosan-Based Quercetin Nanohydrogel in Human Cancer Cells.

BACKGROUND: Previous studies have reported that quercetin (Q) has a potential antibacterial and anticancer activity. However, its application is limited by many important factors including high hydrophobicity and low absorption. METHODOLOGY: In the current study, we synthesized and characterized (Patent) a novel chitosan-based quercetin nanohydrogel (ChiNH/Q). Encapsulation efficiency was confirmed by UV/VIS spectrophotometer. Physicochemical characterization of ChiNH/Q was assessed by PDI, DLS, SEM, FTIR, and XRD. The toxicity of the ChiNH/Q against five strains of the pathogen and HepG2 cells was examined. Moreover, the quantification of ChiNH/Q on genomic global DNA methylation and expression of DNMTs (DNMT1/3A/3B) in HepG2 cancer cells were evaluated by ELISA and real-time PCR, respectively. RESULTS: Under the SEM-based images, the hydrodynamic size of the ChiNH/Q was 743.6 nm. The changes in the PDI were 0.507, and zeta potential was obtained as 12.1 mV for ChiNH/Q. The FTIR peak of ChiNH/Q showed the peak at 627 cm-1 corresponded to tensile vibrational of NH2-groups related to Q, and it is the indication of Q loading in the formulation. Moreover, XRD data have detected the encapsulation of ChiNH/Q. The ChiNH/Q showed a potent antimicrobial inhibitory effect and exerted cytotoxic effects against HepG2 cancer cells with IC50 values of 100 µg/mL. Moreover, our data have shown that ChiNH/Q effectively reduced (65%) the average expression level of all the three DNMTs (p<0.05) and significantly increased (1.01%) the 5-methylated cytosine (5-mC) levels in HepG2 cells. CONCLUSION: Our results showed for the first time the bioavailability and potentiality of ChiNH/Q as a potent antimicrobial and anticancer agent against cancer cells. Our result provided evidence that ChiNH/Q could effectively reduce cellular DNMT expression levels and increase genomic global DNA methylation in HepG2 cancer cells. Our results suggest a potential clinical application of nanoparticles as antimicrobial and anticancer agents in combination cancer therapy.

Mentha piperita essential oils loaded in a chitosan nanogel with inhibitory effect on biofilm formation against S. mutans on the dental surface.

Mentha piperita essential oils (MPEO) were loaded into chitosan nanogel to use as antibiofilm agent against Streptococcus mutans and to protect its dental plaque. Chitosan nanoparticles (CsNPs) were prepared by sol-gel method using linking bridge of tripolyphosphate (TPP). Physiological properties of MPEO-CNs were assessed by FTIR, SEM/EDX, DLS and zeta potential. Release kinetics, MIC and MBC were determined for MPEO-CNs. Expression of biofilm-associated genes including 8 genes: grfB, C and D, brpA, spaP, gbpB, relA and vicR was investigated at the presence of sub-MIC of MPEO-CNs. Most abundant bioactive compounds of MPEO were l-menthol (45.05%) and l-menthal (17.53%). SEM/EDX exhibited successful entrapment of MPEO into CsNPs followed by the changes in abundance of elemental peaks. A signal at 1737 cm-1 on chitosan spectrum was attributed to the carboxylic (CO) groups overlapped by MPEO incorporation. A new signal at 2361 cm-1 was assigned to electrostatic interactions of amine groups in chitosan with phosphoric units of TPP within the MPEO-chitosan. MPEO incorporation into porous nanogel decreased monodispersity of the nanoparticles and then raises z-average. Maximum release of MPEO was about 50% during 360 h in a hydroalcoholic solvent at ambient temperature. The adherence of bacterial cells showed high sensitivity to the nanoformulation of MPEO compared with unloaded chitosan-nanogel. Antibiofilm inhibition of S. mutans occurred in 50 and 400 µg/mL for MPEO-CNs and unloaded-nanogel, respectively. Among biofilm synthesis genes, gtfB, gtfC, gtfD were slightly affected by MPEO-CNs treatment, while gbpB, spaP, brpA, relA, and vicR genes underwent significant down-regulation in the presence of both unloaded-nanogel and MPEO-loaded-nanogel. This study demonstrated that the MPEO-CNs promised an efficient nanoformulation with the greatest inhibitory action against some glycosyltransferase genes (gtfB, C and D) as important enzymes involved in extracellular polymers. Finally, the results concluded that MPEO-CNs have a potential use as antibiofilm agent in toothpaste or mouth washing formulations.

The synergistic effect of hydroalcoholic extracts of Origanum vulgare, Hypericum perforatum and their active components carvacrol and hypericin against Staphylococcus aureus.

AIM: This study was designed to evaluate the synergistic activities of hydroalcoholic extracts of medicinal plants Origanum vulgare and Hypericum perforatum and their active components, carvacrol and hypericin against Staphylococcus aureus. METHODS: The synergistic effects of the plants, as well as carvacrol and hypericin, were examined using a checkered method against S. aureus (ATCC 12600). RESULTS: A fractional inhibitory concentration of 0.5 was obtained for combination of O. vulgare and H. perforatum and 0.49 for combination of the active ingredients carvacrol and hypericin, both of which indicated a synergistic effect. CONCLUSION: This preliminary evaluation demonstrated a synergistic property of O. vulgare and H. perforatum extracts in treating S. aureus infection. This study indicates that combination of the plants, as well as combination of carvacrol and hypericin, might be used as a new antibacterial strategy against S. aureus.

Phytochemical Profiles and Antibacterial Activities of Hydroalcoholic Extracts of Origanum vulgare and Hypericum perforatum and Carvacrol and Hypericin as a Promising Anti-Staphylococcus aureus.

OBJECTIVES: Staphylococcus aureus, a Gram-positive bacteria, is ranked second among the causes of hospital infections and is one of the three main causes of food poisoning. In recent times, the spread of antibiotic resistance in S. aureus has become very worrisome. Therefore, research for new effective drugs is important. The present study aims to investigate the phytochemical profiles and antibacterial effects of hydroalcoholic extracts of Origanum vulgare (Lamiaceae family) and Hypericum perforatum (Clusiaceae family) and their active compounds on S. aureus (ATCC 12600) in vitro. METHODS: The identification of phytochemical compounds in both plants was performed by Highperformance liquid chromatography (HPLC), headspace-solid-phase microextraction (HS-SPME) and Fourier-transform infrared spectroscopy (FTIR). To investigate microbial susceptibility, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and disc diffusion method (DAD) were used. Finally, the results of the study were compared with methicillin. RESULTS: Of the 42 combinations of O. vulgare, carvacrol (48%) and of the 38 combinations of H. perforatum, hypericin (46.2%) were the most abundant. The MIC, MBC and DAD of O. vulgare and H. perforatum, carvacrol, hypericin and methicillin were 625, 625, 312.5, 78.12 and 384 µg/mL, 10000, 10000, 2500, 2500 and 384 µg/mL, and 15.66 ± 4.49, 12.66 ± 0.47 and 22 ± 0.81 mm, respectively. CONCLUSION: Due to the significant effects of O. vulgare and H. perforatum and their active components against S. aureus, it is expected that in the future, hypericin, carvacrol and their derivatives can be used as effective antibacterial agents against S. aureus.

Fabrication of High Content Carbon Nanotube-Polyurethane Sheets with Tailorable Properties.

We have fabricated carbon nanotube (CNT)-polyurethane (TPU) sheets via a one-step filtration method that uses a TPU solvent/nonsolvent combination. This solution method allows for control of the composition and processing conditions, significantly reducing both the filtration time and the need for large volumes of solvent to debundle the CNTs. Through an appropriate selection of the solvents and tuning the solvent/nonsolvent ratio, it is possible to enhance the interaction between the CNTs and the polymer chains in solution and improve the CNT exfoliation in the nanocomposites. The composition of the nanocomposites, which defines the characteristics of the material and its mechanical properties, can be precisely controlled. The highest improvements in tensile properties were achieved at a CNT:TPU weight ratio around 35:65 with a Young's modulus of 1270 MPa, stress at 50% strain of 35 MPa, and strength of 41 MPa, corresponding to ∼10-fold improvement in modulus and ∼7-fold improvement in stress at 50% strain, while maintaining a high failure strain. At the same composition, CNTs with higher aspect ratio produce nanocomposites with greater improvements (e.g., strength of 99 MPa). Electrical conductivity also shows a maximum near the same composition, where it can exceed the values achieved for the pristine nanotube buckypaper. The trend in mechanical and electrical properties was understood in terms of the CNT-TPU interfacial interactions and morphological changes occurring in the nanocomposite sheets as a function of increasing the TPU content. The availability of such a simple method and the understanding of the structure-property relationships are expected to be broadly applicable in the nanocomposites field.

INVESTIGATION ON CHEMICAL COMPOSITION, ANTIMICROBIAL, ANTIOXIDANT, AND CYTOTOXIC PROPERTIES OF ESSENTIAL OIL FROM DRACOCEPHALUM KOTSCHYI BOISS.

BACKGROUND: Dracocephalum kotschyi Boiss is a herb with wide-spread applications. Lorestan traditional healers have applied it for the treatment of rheumatoid diseases and stomach disorders. MATERIALS AND METHODS: Hydrodistillation process was used for essential oil extraction, the extracted essential oil was then analyzed through combination of capillary GC-FID, GC-MS and RI. The in vitro antimicrobial, antioxidant and cytotoxic activities of this essential oil were examined. Results indicate that the essential oil has a broad range of anti-microbial activity against all of the tested microorganisms. RESULTS: The 50% of cytotoxic concentrations was 26.4 µg/ml and 4266.7 µg/ml for Hela cells and human lymphocytes, respectively. The oil cytotoxicity against the human tumor cell line was far higher than the amount required for human healthy cells. Conversely, the essential oil's IC50 value of 49.2 µg/ml in the DPPH assay, could be regarded as its strong antioxidant potential. CONCLUSION: According to the data obtained, it can be concluded that D. kotschyi essential oil could be applied as a safe antibacterial and antioxidant agent for food and pharmaceutical purposes.

Influence of the reaction stoichiometry on the mechanical and thermal properties of SWCNT-modified epoxy composites.

Previous studies suggest that carbon nanotubes (CNTs) have a considerable influence on the curing behavior and crosslink density of epoxy resins. This invariably has an important effect on different thermal and mechanical properties of the epoxy network. This work focuses on the important role of the epoxy/hardener mixing ratio on the mechanical and thermal properties of a high temperature aerospace-grade epoxy (MY0510 Araldite as an epoxy and 4,4'-diaminodiphenylsulfone as an aromatic hardener) modified with single-walled carbon nanotubes (SWCNTs). The effects of three different stoichiometries (stoichiometric and off-stoichiometric) on various mechanical and thermal properties (fracture toughness, tensile properties, glass transition temperature) of the epoxy resin and its SWCNT-modified composites were obtained. The results were also supported by Raman spectroscopy and scanning electron microscopy (SEM). For the neat resin, it was found that an epoxy/hardener molar ratio of 1:0.8 provides the best overall properties. In contrast, the pattern in property changes with the reaction stoichiometry was considerably different for composites reinforced with unfunctionalized SWCNTs and reduced SWCNTs. A comparison among composites suggests that a 1:1 molar ratio considerably outperforms the other two ratios examined in this work (1:0.8 and 1:1.1). This composition at 0.2 wt% SWCNT loading provides the highest overall mechanical properties by improving fracture toughness, ultimate tensile strength and ultimate tensile strain of the epoxy resin by 40%, 34%, 54%, respectively.

Large-scale production of PMMA/SWCNT composites based on SWCNT modified with PMMA.

In this work, a two-step method consisting of in situ polymerization of polymethyl methacrylate (PMMA) in the presence of single-walled carbon nanotubes (SWCNT), followed by the redispersion of the resulting compound in dimethylformamide (DMF), was used to fabricate SWCNT modified with PMMA (SWCNT-PMMA). Raman spectroscopy revealed that PMMA was merely wrapped around the SWCNT when raw SWCNT or purified SWCNT were used as the starting material. However, PMMA was covalently bonded to SWCNT when acid treated SWCNT (SWCNT-COOH) was used as the starting material. SWCNT-PMMA compounds were further diluted in pure PMMA by conventional melt compounding at large scale (several kilograms) to obtain transparent composites containing 0.09 wt % SWCNT. The micro- and nano-dispersion of the SWCNT in the composites were analyzed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The thermal and mechanical properties of the composites were determined by thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), tensile testing, and Charpy impact testing. At the the low SWCNT loading studied, the tensile properties remain unchanged, whereas the impact strength improves by 20%.

Toughening of epoxy matrices with reduced single-walled carbon nanotubes.

Reduced single-walled carbon nanotubes (r-SWCNT) are shown to react readily at room temperature under inert atmosphere conditions with epoxide moieties, such as those in triglycidyl p-amino phenol (TGAP), to produce a soft covalently bonded interface around the SWCNT. The soft interface is compatible with the SWCNT-free cross-linked cured matrix and acts as a toughener for the composite. Incorporation of 0.2 wt % r-SWCNT enhances the ultimate tensile strength, toughness and fracture toughness by 32, 118, and 40%, respectively, without change in modulus. A toughening rate (dK(IC)/dwt(f)) of 200 MPa m(0.5) is obtained. The toughening mechanism is elucidated through dynamic mechanical analyses, Raman spectroscopy and imaging, and stress-strain curve analyses. The method is scalable and applicable to epoxy resins and systems used commercially.

Solvent-free preparation of high-toughness epoxy--SWNT composite materials.

Multicomponent nanocomposite materials based on a high-performance epoxy system and single-walled carbon nanotubes (SWNTs) have been prepared. The noncovalent wrapping of nitric acid-treated SWNTs with a PEO-based amphiphilic block copolymer leads to a highly disaggregated filler with a boosted miscibility in the epoxy matrix, allowing its dispersion without organic solvents. Although direct dispersion of acid-treated SWNTs results in modestly improved epoxy matrix mechanical properties, the incorporation of wrapped SWNTs produces a huge increase in toughness (276% improvement at 0.5 wt % loading) and impact strength (193% at 0.5 wt % loading) with no detrimental effect on the elastic properties. A synergistic effect between SWNTs and the block copolymer is revealed on the basis of tensile and impact strength results. Atomic force microscopy has been applied, obtaining stiffness mappings that identify nanostructure features responsible of the dynamic mechanical behavior. The electrical percolation threshold is greatly reduced, from 0.31 to 0.03 wt % SWNTs when block copolymer-wrapped SWNTs are used, and all the measured conductivity values increased up to a maximum of 7 orders of magnitude with respect to the baseline matrix (1 wt % wrapped-SWNTs loading). This approach provides an efficient way to disperse barely dispersible SWNTs without solvents into an epoxy matrix, and to generate substantial improvements with small amounts of SWNTs.