Three-dimensional surface area analyses of developing maxillary second premolar root apices for age estimation using CBCT images.

Three-dimensional surface area analyses of developing root apices for age estimation in children and young adults have shown promising results. The current study aimed to apply this three-dimensional method to develop a regression model for estimating age in Malaysian children aged 7 to 14 using developing maxillary second premolars. A training sample of 155 cone-beam computed tomography scans (83 Malays and 72 Chinese) was analysed, and the formula was subsequently validated on an independent sample of 92 cone-beam computed tomography scans (45 Malays and 47 Chinese). The results showed a strong correlation (r = 94 %) between the chronological age as a dependent variable and the predictor variables, including root surface area of the apex, sex, ethnicity, and root development status (open/closed apices). For this model, the predictor variables accounted for 88.4 % of the variation in age except sex and ethnicity. A mean absolute error value of 0.42 indicated that this model can be reliably used for Malaysian children. In conclusion, this study recognises the method of three-dimensional surface area analyses as a valuable tool for age estimation in forensic and clinical practice. Further studies are highly recommended to assess its effectiveness across different demographic groups.

Dental age estimation of Malaysian Indian children and adolescents: applicability of Chaillet and Demirjian's modified method using artificial neural network.

BACKGROUND: Recognising the importance of dental age (DA) estimation in forensic investigations, a variety of methods abound in the literature due to population-specific attributes. A reference eight-tooth method developed by Chaillet and Demirjian estimated the DA of children and adolescents. AIM: This study aims to investigate the applicability of Chaillet and Demirjian's method among Malaysian Indians aged 5.00-17.99 years. SUBJECTS AND METHODS: Dental panoramic tomographs of Malaysian Indians aged 5.00-17.99 years were statistically analysed using paired t-test and artificial neural networks multilayer perceptron (ANN-MLP). RESULTS: A total of 1015 dental panoramic tomographs were analysed. Paired t-test analysis against the reference dental maturity scores revealed underestimation of DA in boys of 1.68 years and girls of 2.56 years indicating inaccurate age estimation. A population-specific prediction model with a new set of dental maturity scores was established on Chaillet and Demirjian's scores using ANN-MLP. The new dental maturity scores showed accurate estimation of DA with differences between CA and DA being 12 and 25 days for boys and girls, respectively. Furthermore, a new DA prediction formula was developed using regression analysis following the establishment of new dental scores based on ANN-MLP. CONCLUSION: A novel Malaysian Indian-specific prediction model that demonstrated accurate DA estimation was established.

Dental age estimation of Malaysian children: a comparison of two-dimensional versus three-dimensional imaging analyses of the developing root apices.

AIM: This study compared the effectiveness of the three-dimensional (3D) cone beam computed tomography (CBCT) method of age estimation developed by Asif et al. with two-dimensional Cameriere's method. SUBJECTS AND METHODS: CBCT images belonging to 129 Malaysian Chinese and Malay ethnic groups aged 7-14 years were investigated and analysed. RESULTS: The results indicated a strong correlation between chronological age and the predictor variables for both Cameriere's (r = 0.984) and Asif's (r = 0.988) methods of age estimation. Fisher Z test analysis indicated no statistically significant difference in the correlation values between the two methods. Mean absolute error (MAE) value of 0.613 was observed for Cameriere's and 0.290 was observed for Asif's method. CONCLUSIONS: The results indicated that the methods of age estimation from both Asif et al. and Cameriere et al. are applicable on Malaysian children. However, Asif et al.'s 3D CBCT method of age estimation resulted in greater accuracy and reliability in estimating chronological age.

Age estimation from developing third molars.

We investigated the development of third molars among Malaysians (including variations between jaws and genders) using Demirjian's method. Dental panoramic radiographs of 1224 subjects aged 8 to 24 years were examined, and the molars were assigned Demirjian et al.'s development grades (A-H). Results indicated that 18.8% had congenitally missing or extracted third molars. Development of molars begins earlier in females (also in the mandible), but by age 9, male children's molar development speeds up with more advanced grades in their middle teens than females. Grade C indicates the subject is a juvenile, while initiation of root development (Grade E), was observed from 13 years on. Grade H can occur in a child aged 18 years who technically is still a juvenile. We compared the development and growth patterns of the third molar from both the maxilla and the mandible.

Distribution of mandibular trabeculae bone volume fraction in relation to different MOP intervals for accelerating orthodontic tooth movement.

OBJECTIVES: To investigate the effect of micro-osteoperforation (MOP) on the horizontal and vertical distribution of mandibular trabeculae bone volume fraction in relation to different MOP intervals during canine retraction. MATERIALS AND METHODS: This single-center, single-blinded, prospective randomized split-mouth clinical trial included 30 healthy participants aged 18 years and older, randomized into three groups of different MOP intervals (4, 8, and 12-weekly). Cone beam computed tomography images were taken to assess the bone volume fraction (bone volume over total volume or BV/TV). RESULTS: BV/TV was significantly reduced (mean difference: 9.79%, standard deviation [SD]: 11.89%; 95% confidence interval [CI]: 4.77, 14.81%; P < .01) and canine retraction increased (mean difference: -1.25 mm/4 mo, SD: 0.79 mm; 95% CI: -1.59, -0.92 mm; P < .01) with MOP, compared to control sites. MOP significantly changed the vertical and horizontal patterns of trabeculae bone with lower values nearer to intervention sites. Only the 4-weekly MOP interval group showed significant decrease in BV/TV (mean difference: 14.73%, SD: 12.88%; 95% CI: 3.96, 25.50%; P = .01) despite significant increase in canine retraction rate for all interval groups. With the use of MOP, BV/TV was found to be inversely correlated to the rate of canine retraction (r = -0.425; P = .04). CONCLUSIONS: Mandibular trabecular alveolar bone volume fraction was reduced and rate of orthodontic tooth movement increased with MOP, especially in the 4-weekly interval. However, this effect was limited to the immediate interdental region of MOP.

Three-dimensional assessment of the extraction sockets, augmented with platelet-rich fibrin and calcium sulfate: A clinical pilot study.

OBJECTIVES: This clinical study assessed and compared the linear and volumetric changes of extraction sockets grafted with a combination of Platelet-Rich Fibrin (PRF) and Calcium Sulfate (CS) (PRF-CS), and extraction sockets grafted with a combination of PRF and xenograft (X) (PRF-X). METHODS: Five single maxillary premolar extraction sockets received PRF-CS grafts and five single maxillary premolar sockets received PRF-X grafts. Linear (horizontal and vertical) measurements were accomplished using Cone Beam Computed Tomography (CBCT) images and volumetric changes were assessed using MIMICS software. Soft tissue level changes were measured using Stonecast models. All measurements were recorded at baseline (before extraction) and at 5-months post-extraction. RESULTS: Significant reduction in vertical and horizontal dimensions were observed in both groups except for distal bone height (DBH = 0.44 ±â€¯0.45 mm, p = 0.09) and palatal bone height (PBH = 0.39 ±â€¯0.34 mm, p = 0.06) in PRF-X group. PRF-CS group demonstrated mean horizontal shrinkage of 1.27 ±â€¯0.82 mm (p = 0.02), when compared with PRF-X group (1.40 ±â€¯0.85 mm, p = 0.02). Vertical resorption for mesial bone height (MBH = 0.56 ±â€¯0.25 mm, p = 0.008), buccal bone height (BBH = 1.62 ±â€¯0.91 mm, p = 0.01) and palatal bone height (PBH = 1.39 ±â€¯0.87 mm, p = 0.02) in PRF-CS group was more than resorption in PRF-X group (MBH = 0.28 ±â€¯0.14 mm, p = 0.01, BBH = 0.63 ±â€¯0.39 mm, p = 0.02 and PBH = 0.39 ±â€¯0.34 mm, p = 0.06). Volumetric bone resorption was significant within both groups (PRF-CS = 168.33 ±â€¯63.68 mm3, p = 0.004; PRF-X = 102.88 ±â€¯32.93 mm3, p = 0.002), though not significant (p = 0.08) when compared between groups. In PRF-X group, the distal soft tissue level (DSH = 1.00 ±â€¯0.50 mm, p = 0.03) demonstrated almost 2 times more reduction when compared with PRF-CS group (DSH = 1.00 ±â€¯1.00 mm, 0.08). The reduction of the buccal soft tissue level was pronounced in PRF-CS group (BSH = 2.00 ±â€¯2.00 mm, p = 0.06) when compared with PRF-X group (BSH = 1.00 ±â€¯1.50 mm, p = 0.05). CONCLUSIONS: PRF-CS grafted sites showed no significant difference with PRF-X grafted sites in linear and volumetric dimensional changes and might show clinical benefits for socket augmentation. The study is officially registered with ClinicalTrials.gov Registration (NCT03851289).

Osseous evidence behind micro-osteoperforation technique in accelerating orthodontic tooth movement: A 3-month study.

INTRODUCTION: The study aimed to investigate the effects of micro-osteoperforations (MOPs) on the mandibular bone volume/tissue volume (BV/TV) ratio changes and the rate of orthodontic tooth movement using cone-beam computed tomography images. Another objective was to evaluate the effects of MOP frequency intervals (4 weeks, 8 weeks, and 12 weeks) on the BV/TV ratio and rate of tooth movement. METHODS: In 24 participants, 140-200 g of force was applied for mandibular canine retraction. Three MOPs were made according to the scheduled intervals of the 3 different groups: group 1 (MOP 4 weeks), group 2 (MOP 8 weeks), and group 3 (MOP 12 weeks) directly at the mandibular buccal cortical bone of extracted first premolars sites. Cone-beam computed tomography scans were obtained at the 12th week after MOP application. Computed tomography Analyzer software (version 1.11.0.0; Skyscan, Kontich, Belgium) was used to compute the trabecular alveolar BV/TV ratio. RESULTS: A significant difference was observed in the rate of canine movement between control and MOP. Paired t test analysis showed a significant difference (P = 0.001) in the mean BV/TV ratio between control and MOP sides in all the frequency intervals groups. However, the difference was significant only in group 1 (P = 0.014). A strong negative correlation (r = -0.86) was observed between the rate of canine tooth movement and the BV/TV ratio at the MOP side for group 1 and all frequency intervals together (r = -0.42). CONCLUSIONS: The rate of orthodontic tooth movement can be accelerated by the MOP technique with frequently repeated MOPs throughout the treatment.

A novel method of age estimation in children using three-dimensional surface area analyses of maxillary canine apices.

The study aimed to develop a novel and reliable age estimation method using three-dimensional surface area analyses of maxillary canine apices among Malaysian children using CBCT data. A validated regression equation for age estimation was derived and correlation between chronological age and the surface areas of the developing maxillary canine's apices were investigated. Variations based on ethnicities, gender and status of root development were also investigated in terms of fit to the age estimation model. CBCT images of the patients ranging in age from 7 to 14 years were included in the study. Training sample of 191 intact permanent maxillary canines was selected from 191 CBCT images belonging to 100 Malays and 91 Chinese. Moreover, an independent validation sample of 96 permanent maxillary canines was selected from 96 CBCT images belonging to 48 Malays and 48 Chinese. Three-dimensional image modeling and surface area analyses of the developing canine's apices were performed using Mimics and 3-Matics software. A strong correlation (r = 0.978) was observed between chronological age and surface area of the developing maxillary canine's apices. 95.6% of the variation in age can be explained by surface area of canine's apices, gender and status of the root development (open/closed apices). However, ethnicity did not contributed to the fit of age estimation model. Female showed advanced development as compared to male. Mean absolute error values indicated that this newly developed 3D surface area analyses of canine apex can be used as a reliable method for age estimation among Malaysian children.

Effect of reconstruction parameters on cone beam CT trabecular bone microstructure quantification in sheep.

BACKGROUND: Cone Beam Computed Tomography (CBCT) is a reliable radiographic modality to assess trabecular bone microarchitecture. The aim of this study was to determine the effect of CBCT image reconstruction parameters, namely, the threshold value and reconstruction voxel size, on trabecular bone microstructure assessment. METHODS: Five sectioned maxilla of adult Dorper male sheep were scanned using a CBCT system with a resolution of 76 µm3 (Kodak 9000). The CBCT images were reconstructed using different reconstruction parameters and analysed. The effect of reconstruction voxel size (76, 100 and 200 µm3) and threshold values (±15% from the global threshold value) on trabecular bone microstructure measurement was assessed using image analysis software (CT analyser version 1.15). RESULTS: There was no significant difference in trabecular bone microstructure measurement between the reconstruction voxel sizes, but a significant difference (Tb.N = 0.03, Tb.Sp = 0.04, Tb.Th = 0.01, BV/TV = 0.00) was apparent when the global threshold value was decreased by 15%. CONCLUSIONS: Trabecular bone microstructure measurements are not compromised by changing the CBCT reconstruction voxel size. However, measurements can be affected when applying a threshold value of less than 15% of the recommended global value.

Enhancing the three-dimensional visualization of a foreign object using Mimics software.

A patient was referred to the Oral and Maxillofacial Imaging Division and the attending dental specialist suspected a foreign object at the anterior region of the maxilla. The region was scanned using Kodak 9000 3D cone-beam computed tomography (CBCT) extraoral imaging system (Carestream Health, Inc.) to determine the type and morphometric characteristic of foreign object. The CBCT images failed to determine the identity and nature of the foreign object. CBCT images were then exported to the Materialise Interactive Medical Image Control System (Mimics) software to evaluate whether this software can help in enhancing the visualization of the foreign object in the maxillofacial region. The findings showed that there was an improved visualization of the foreign body and the type of the object could be determined with certainty. The object was identified as an endodontic file and was clearly visible when visualized as a reconstructed 3D model in Mimics software. Although the identification of abnormalities has been dramatically improved using 3D scans, the visualization can be further enhanced using image processing software like Mimics.

Three-dimensional image analysis of developing mandibular third molars apices for age estimation: A study using CBCT data enhanced with Mimics & 3-Matics software.

Three-dimensional imaging has improved the method of analysis in many forensic science investigations. The study aimed to derive regression equation for age estimation by investigating the relationship between chronological age and surface area of the developing mandibular 3rd molars apices. Furthermore, other predictor variables: ethnicity (Malay and Chinese), gender and status of the root development completion (open/closed apices) were also investigated in terms of fit to the age estimation model. One hundred and twenty eight training and 55 validation samples of intact mandibular 3rd molars were selected from 183 CBCT scans. The samples comprised of 93 Malays and 90 Chinese, ranging in age from 13 to 24 years. Three-dimensional image modeling and surface area analysis of the developing mandibular 3rd molars apices were performed using Mimics and 3-Matics software. Multiple linear regression analysis was used to derive age estimation model using chronological age as a dependent variable and surface area of the apices, ethnicity, gender and status of the root development completion (open/closed apices) as predictor variables. A strong inverse correlation (r = 0.95, SD = 1.144) was observed between chronological age and all the predictor variables. The results showed that 89.6% of the variation in age can be explained by the predictor variables. Mean absolute error (MAE) value of 0.8223 was observed when the derived regression equation was tested on the independent validation sample. In conclusion, three-dimensional surface area analysis of the developing mandibular 3rd molars apices can be used as a reliable method for age estimation.

Dental age estimation in Malaysian adults based on volumetric analysis of pulp/tooth ratio using CBCT data.

Forensic odontology plays an important role in human identification and dental age estimation is an integral part of this process. The aim of the study was to investigate the association between chronological age and pulp/tooth volume ratio in a Malaysian population (Malays and Chinese) from cone-beam computed tomography (CBCT) scans, enhanced with Mimics software. Three hundred CBCT scans of 153 males and 147 females, aged between 16 and 65 years were divided into 5 age groups. Volumetric analysis of the pulp/tooth ratio was performed in maxillary left canines, maxillary right canines and maxillary right central incisors. Simple linear regression and Pearson correlation analysis indicated the strongest coefficient of correlation (R) values for maxillary right central incisors (0.83) followed by maxillary right canines (0.74) and maxillary left canines (0.73). Fisher's Z test indicated that dental age estimation is gender independent. The derived regression equations were further validated on an independent group of 126 teeth. The results indicated mean absolute error (MAE) values of 6.48 and 8.58 years for maxillary right central incisors and maxillary canines respectively. It was also noticed that MAE values were higher among the age groups ranging from 46 to 65 years. This study showed that a volumetric change in the pulp cavity with age is a valuable assessment method for dental age estimation among Malaysian population.

Dental age estimation employing CBCT scans enhanced with Mimics software: Comparison of two different approaches using pulp/tooth volumetric analysis.

The methods of dental age estimation and identification of unknown deceased individuals are evolving with the introduction of advanced innovative imaging technologies in forensic investigations. However, assessing small structures like root canal volumes can be challenging in spite of using highly advanced technology. The aim of the study was to investigate which amongst the two methods of volumetric analysis of maxillary central incisors displayed higher strength of correlation between chronological age and pulp/tooth volume ratio for Malaysian adults. Volumetric analysis of pulp cavity/tooth ratio was employed in Method 1 and pulp chamber/crown ratio (up to cemento-enamel junction) was analysed in Method 2. The images were acquired employing CBCT scans and enhanced by manipulating them with the Mimics software. These scans belonged to 56 males and 54 females and their ages ranged from 16 to 65 years. Pearson correlation and regression analysis indicated that both methods used for volumetric measurements had strong correlation between chronological age and pulp/tooth volume ratio. However, Method 2 gave higher coefficient of determination value (R2 = 0.78) when compared to Method 1 (R2 = 0.64). Moreover, manipulation in Method 2 was less time consuming and revealed higher inter-examiner reliability (0.982) as no manual intervention during 'multiple slice editing phase' of the software was required. In conclusion, this study showed that volumetric analysis of pulp cavity/tooth ratio is a valuable gender independent technique and the Method 2 regression equation should be recommended for dental age estimation.

A comparative study between xerographic, computer-assisted overlay generation and animated-superimposition methods in bite mark analyses.

This study was to compare the suitability and precision of xerographic and computer-assisted methods for bite mark investigations. Eleven subjects were asked to bite on their forearm and the bite marks were photographically recorded. Alginate impressions of the subjects' dentition were taken and their casts were made using dental stone. The overlays generated by xerographic method were obtained by photocopying the subjects' casts and the incisal edge outlines were then transferred on a transparent sheet. The bite mark images were imported into Adobe Photoshop® software and printed to life-size. The bite mark analyses using xerographically generated overlays were done by comparing an overlay to the corresponding printed bite mark images manually. In computer-assisted method, the subjects' casts were scanned into Adobe Photoshop®. The bite mark analyses using computer-assisted overlay generation were done by matching an overlay and the corresponding bite mark images digitally using Adobe Photoshop®. Another comparison method was superimposing the cast images with corresponding bite mark images employing the Adobe Photoshop® CS6 and GIF-Animator©. A score with a range of 0-3 was given during analysis to each precision-determining criterion and the score was increased with better matching. The Kruskal Wallis H test showed significant difference between the three sets of data (H=18.761, p<0.05). In conclusion, bite mark analysis using the computer-assisted animated-superimposition method was the most accurate, followed by the computer-assisted overlay generation and lastly the xerographic method. The superior precision contributed by digital method is discernible despite the human skin being a poor recording medium of bite marks.