Method for assessing coating uniformity of angioplasty balloons coated with poly(lactic-co-glycolic acid) nanoparticles loaded with quercetin.

In this study, we aim to quantify coating uniformity and correlate fluorescence intensity to drug loading for drug-coated angioplasty balloons (DCB) coated with 5, 10, 15, or 20 layers of poly(lactic-co-glycolic acid) nanoparticles (NPs) entrapped with quercetin. Uniformity was quantified from histograms and horizontal line profiles of microscopic fluorescent images acquired with sample specific parameters, and cracks in the coating were measured and counted. The fluorescence of images acquired with global parameters was correlated with quercetin loading measured via gravimetric/HPLC analysis. More layers on DCBs may be associated with less uniform coatings, as indicated by differences in histogram standard deviations. The line profile percent deviation from average for each sample was <20%. Cracks were present on all balloons, but their length was not significantly different between samples. The 5-layer DCBs had the fewest cracks, whereas the 15-layer DCBs had the most cracks. A strong positive correlation (R = 0.896) was identified between fluorescence intensity and drug loading. A relationship between the number of layers and coating uniformity seems to exist, but further investigations are required for confirmation. Fluorescence intensity appears to strongly predict drug loading, demonstrating that fluorescent imaging may be a viable alternative to drug release studies.

Modulation of Methoxyfenozide Release from Lignin Nanoparticles Made of Lignin Grafted with PCL by ROP and Acylation Grafting Methods.

An efficient and sustainable agriculture calls for the development of novel agrochemical delivery systems able to release agrochemicals in a controlled manner. This study investigated the controlled release of the insecticide methoxyfenozide (MFZ) from lignin (LN) nanoparticles (LNPs). LN-grafted poly(ε-caprolactone) (LN-g-PCL) polymers were synthesized using two grafting methods, ring-opening polymerization (ROP)(LN-g-PCLp) and acylation reaction (LN-g-PCLa), creating polymers capable of self-assembling into nanoparticles of different properties, without surfactants. The LN-g-PCLp polymers exhibited a degree of polymerization (DP) from 22 to 101, demonstrating enhanced thermal stability after LN incorporation. LNPs loaded with MFZ exhibited a spherical core-shell structure with a hydrophilic LN outer layer and hydrophobic PCL core, with sizes affected by grafting methods and DP. LNPs controlled MFZ release, displaying variation in release profiles depending on the grafting methodology used, LN-g-PCLp DP, and temperature variations (23 to 30 °C). LNPs formulated with LN-g-PCLa showed a cumulative release of MFZ of 36.78 ± 1.23% over 196 h. Comparatively, increasing the DP of the LN-g-PCLp polymers, a reduction of the LNPs release rate from 92.39 ± 1.46% to 70.59 ± 2.40% was achieved within the same time frame. These findings contribute to identifying ways to modulate the controlled release of agrochemicals by incorporating them in renewable-based LNPs.