Synergistic Effect of Nano Strontium Titanate Coating and Ultraviolet C Photofunctionalization on Osteogenic Performance and Soft Tissue Sealing of poly(ether-ether-ketone).

This study aimed to evaluate the bioactivity of poly(ether ether ketone) (PEEK) after surface modification by persistent photoconductive strontium titanate (SrTiO3) magnetron sputtering and ultraviolet (UV) C irradiation. According to the different modifications, the PEEK specimens were randomly divided into five groups (n = 38/group): PEEK, Sr100-PEEK, Sr200-PEEK, UV/PEEK, and UV/Sr200-PEEK. Then, the specimens of Sr100-PEEK and Sr200-PEEK groups were, respectively, coated with 100 and 200 nm thickness photocatalyst SrTiO3 on the PEEK surface by magnetron sputtering. Subsequently, UV-C light photofunctionalized the specimens of PEEK and Sr200-PEEK groups to form UV/PEEK and UV/Sr200-PEEK groups. The specimens were characterized by a step meter, scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive X-ray spectroscopy (EDX), and a water contact angle meter. The release test of the Sr ion was performed by inductively coupled plasma mass spectrometry (ICP-MS). In vitro study, osteogenic activity (MC3T3-E1 osteoblast-like cells) and epithelial and connective tissue attachment (gingival epithelial cells GE1 and fibroblasts NIH3T3) were analyzed in five groups. Surface morphology of the specimens was changed after coating, and the Sr content on the Sr-PEEK surface was increased with increasing coating thickness. In addition, the contact angle was increased significantly after magnetron sputtering. After UV-C photofunctionalization, the content of surface elements changed and the contact angle was decreased. The release of Sr ion was sustained, and the final cumulative release amount did not exceed the safety limit. In vitro experiments showed that SrTiO3 improved the cell activity of MC3T3-E1 and UV-C irradiation further enhanced the osteogenic performance of PEEK. Besides, UV-C irradiation also significantly promoted the cell viability, development, and expression of adhesion proteins of GE1 and NIH3T3 on PEEK. The present investigation demonstrated that nano SrTiO3 coating with UV-C photofunctionalization synergistically enhanced the osteogenic properties and soft tissue sealing function of PEEK in vitro.

Evaluation of carbonate apatite as a bone substitute in rat extraction sockets from the perspective of mesenchymal stem cells.

Carbonate apatite (CO3Ap) is a major inorganic bone component and an effective bone substitute. To clarify the function of CO3Ap, we compared differences among CO3Ap, hydroxyapatite (HAp), and ß-tricalcium phosphate (ß-TCP) by focusing on mesenchymal stem cells (MSCs) that have a role in wound healing. For in vivo experiments, maxillary molars were removed and the bone substitute was inserted. MSC accumulation around extraction sockets was significantly promoted in CO3Ap and ß-TCP groups. For in vitro experiments, MSCs were cultured with bone substitutes. The differentiation potential and amount of calcium deposition were significantly lower in CO3Ap and HAp groups than in the ß-TCP group. Increases in insulin-like growth factor-I and vascular endothelial growth factor were found only in the CO3Ap group. CO3Ap-filled extraction sockets accumulated MSCs, and MSCs cultured in the presence of CO3Ap produced large amounts of growth factors. These results suggest that CO3Ap promotes healing of tooth extraction sockets.

Current surface modification strategies to improve the binding efficiency of emerging biomaterial polyetheretherketone (PEEK) with bone and soft tissue: A literature review.

PURPOSE: The aim of this study was to review the literature on current surface modification strategies used to improve the binding efficiency of an emerging biological material, polyetheretherketone (PEEK), with bone and soft tissues. STUDY SELECTION: This review was based on articles retrieved from PubMed, Google Scholar, Web of Science, and ScienceDirect databases. The main keywords used during the search were "polyetheretherketone (PEEK)," "implant," "surface modification," "biomaterials," "bone," "osseointegration," and "soft tissue." RESULTS: The suitability of PEEK surface modification strategies has been critically analyzed and summarized here. Many cell and in vivo experiments in small animals have shown that the use of advanced modification technologies with appropriate surface modification strategies can effectively improve the surface inertness of PEEK, thereby improving its binding efficiency with bone and soft tissues. CONCLUSIONS: Surface modifications of PEEK have revealed new possibilities for implant treatment; however, most results are based on in vitro or short-term in vivo evaluations in small animals. To achieve a broad application of PEEK in the field of oral implantology, more in vivo experiments and long-term clinical evaluations are needed to investigate the effects of various surface modifications on the tissue integration ability of PEEK to develop an ideal implant material.

Synergistic Effect of Carbonate Apatite and Autogenous Bone on Osteogenesis.

Bone augmentation using artificial bone is an important option in dental defect prostheses. A bone substitute using carbonate apatite (CO3Ap), an inorganic component of bone, was reported to have promising bone formation and bone replacement ability. However, the osteoinductivity of artificial bone is less than autogenous bone (AB). In this study, CO3Ap with AB is demonstrated as a clinically effective bone substitute. For in vitro experiments, an osteoclast-like cell (RAW-D) was cultured in the presence of AB, CO3Ap, or both (Mix), and the number of osteoclasts was evaluated. Osteoblasts were also cultured under the same conditions, and the number of adherent cells was evaluated. For in vivo experiments, a few holes were created in the rat tibia and AB, CO3Ap, or Mix were added. At 0, 14, and 21 days, the tissue morphology of the wound area was observed, and the thickness of the cortical bone was measured. In vitro, Mix did not increase the number of osteoclasts or osteoblasts. However, in vivo, the rate of bone replacement remarkably increased with Mix on dome-shape. A bone-grafting material combining osteoinductive AB with abundant artificial bone is expected to be clinically easy to use and able to form bone.

Oral Health-Related Quality of Life Changes after Clinical Remounting of Existing Dentures.

The clinical remount is an accurate and efficient way to reset the occlusion of delivered removable dentures if major occlusal correction is required. Although previous studies have reported that clinical remounting of existing dentures enhances patients' oral function, little subjective feedback is available. This retrospective study reports short-term changes in oral-health-related quality of life (OHRQoL) and masticatory function after clinical remounting of existing dentures. Three time points were defined: before adjustment (T0), immediately after adjustment (T1), and 1 week after adjustment (T2). The medical records of seven patients were analyzed. The mean age of participants was 77.71 years, and the mean service period of their prostheses was 9.43 months. The mean scores of the OHIP-EDENT-J questionnaire at the respective time points were 35, 21.14, and 22.14. The mean readings of masticatory function at the respective time points were 76.71, 89.29, and 111.86. Significant differences in the OHIP-EDENT-J were found between T0 and T1, and T0 and T2; and in masticatory function between T1 and T2, and T0 and T2. The results indicated that after rebalancing of the occlusion of the existing dentures, the patient-reported OHRQoL was improved immediately and maintained at least for a short time, and masticatory function was enhanced over a 1-week period.

Therapeutic Effect of Benidipine on Medication-Related Osteonecrosis of the Jaw.

Medication-related osteonecrosis of the jaw (MRONJ) is an intractable disease that is typically observed in patients with osteoporosis or tumors that have been treated with either bisphosphonate (BP) or antiangiogenic medicine. The mechanism of MRONJ pathogenesis remains unclear, and no effective definitive treatment modalities have been reported to date. Previous reports have indicated that a single injection of benidipine, an antihypertensive calcium channel blocker, in the vicinity of a tooth extraction socket promotes wound healing in healthy rats. The present study was conducted to elucidate the possibility of using benidipine to promote the healing of MRONJ-like lesions. In this study, benidipine was administered near the site of MRONJ symptom onset in a model rat, which was then sacrificed two weeks after benidipine injection, and analyzed using histological sections and CT images. The analysis showed that in the benidipine groups, necrotic bone was reduced, and soft tissue continuity was recovered. Furthermore, the distance between epithelial edges, length of necrotic bone exposed in the oral cavity, necrotic bone area, and necrotic bone ratio were significantly smaller in the benidipine group. These results suggest that a single injection of benidipine in the vicinity of MRONJ-like lesions can promote osteonecrotic extraction socket healing.

Hypothetical Model of How a Clinical Remount Procedure Benefits Patients with Existing Dentures: A Narrative Literature Review.

The clinical remount procedure, which involves remounting the dentures on an articulator with interocclusal records, can effectively reduce occlusal discrepancies. This procedure can be applied not only to new dentures but also to those already in service; however, research in this field is still scarce. This narrative review aims to establish a hypothetical mechanism and possible indications and contraindications for this technique as a basis for further research. Current studies have revealed a high prevalence of malocclusion in delivered dentures. Performing a clinical remount on these existing dentures would enhance the oral function of the denture wearer and would enable effective and accurate correction of the accumulated errors in the jaw relationship in a stable working environment. This technique should be performed if a patient has poor masticatory function or occlusion-related complaints. However, performing a clinical remount on dentures with an excessive anterior-posterior discrepancy between the centric relation and the maximal intercuspal position or on dentures with extremely low occlusal vertical dimension, is considered less effective. The clinical remount procedure remains an essential skill both for fabricating quality dentures and maintaining those already in service.

Oral Function Rehabilitation with the Simplified Lauritzen Clinical Remount Technique in a Patient with Bimaxillary Alveolar Exostoses: A Case Report.

This case report describes a 70 year-old man with IVA lung cancer who required oral function rehabilitation by fabricating dentures with a simplified clinical remount technique. A pair of dentures were fabricated for a 70-year-old man with stage IVA lung cancer. Due to severe bimaxillary exostoses, the dentures could not properly extend and achieve a peripheral seal. The treatment philosophy was to stabilize the dentures and achieve proper function with optimized occlusion. The simplified Lauritzen clinical remount technique was performed at the time of denture delivery and 3 months later. After the second clinical remount procedure, the patient was able to eat meals with the dentures and maintained in a stable condition. Compared with the original technique, the simplified Lauritzen clinical remount omits the facebow transfer and keeps the condylar guidance setting and the Bennett angle unchanged during the adjustment. The prostheses are mounted to a type 3, non-arcon type articulator with anterior stop screws attached to the bilateral condylar parts. With the aid of anterior stop screws, the eccentric movement of dentures can be differentiated on a millimeter scale and balanced easily. It is effective to use occlusal-optimized dentures and the clinical remount technique, especially in difficult cases.

Effect of carbonate apatite as a bone substitute on oral mucosal healing in a rat extraction socket: in vitro and in vivo analyses using carbonate apatite.

BACKGROUND: Low bone quantity and quality are serious problems that affect the prognosis of implants in the cosmetic field. Therefore, artificial bone substitutes are frequently used. However, whether there is a difference in the effect of either bone substitute on soft tissue healing is unclear given their greatly different absorbability. In this study, we used hydroxyapatite (HAp) and carbonate apatite (CO3Ap) as bone substitutes to analyze the epithelial and connective tissue healing after tooth extraction. METHODS: In vitro, oral mucosa-derived epithelial cells (OECs) collected from 4-day-old Wistar rats were seeded on HAp or CO3Ap and evaluated for adhesion, proliferation, migration, apoptosis, and morphology. Fibroblasts (FBs) were also analyzed for their ability to express collagen. In vivo, the extraction of maxillary right first (M1) and second molars (M2) of 6-week-old male Wistar rats was performed, followed by insertion of HAp or CO3Ap granules into the M1 and M2 sites. The oral mucosal healing process was then evaluated histochemically after 7 and 14 days. RESULTS: In vitro, high collagen expression by FBs in the CO3Ap group was observed and the surface analysis showed spreading of the FBs on the CO3Ap surface. However, the activity of OECs was suppressed on CO3Ap. Two weeks after CO3Ap implantation, soft tissue healing was observed, and recovery of the connective tissue was observed on the remaining CO3Ap. CONCLUSIONS: Our results suggest that the formation of soft tissues, including connective tissue, was promoted by CO3Ap in the extraction socket within a short period.

Replacement Process of Carbonate Apatite by Alveolar Bone in a Rat Extraction Socket.

The objective of this study was to investigate a bone graft substitute containing carbonate apatite (CO3Ap) to analyze bone replacement and the state of bone formation in vitro and in vivo compared with autogenous bone (AB) or control. An osteoclast precursor cell line was cultured with AB or CO3Ap, and morphological analysis using scanning electron microscopy and a tartrate-resistant acid phosphatase activity assay were performed. The right maxillary first and second molars of Wistar rats were extracted and compensated by AB or CO3Ap granules. Following implantation, the bone formation state was evaluated after 3, 5, 7, 14, and 28 days of surgery by micro-computed tomography and immunohistostaining. The osteoclast-like cell morphology was typical with many cell protrusions in the AB and CO3Ap groups. Additionally, the number of osteoclast-like cells formed in the culture increased in each group; however, there was no significant difference between the AB and CO3Ap groups. Five days after tooth extraction, osteoclasts were observed near CO3Ap. The bone thickness in the CO3Ap group was significantly increased than that in the control group and the bone formation in the CO3Ap group increased by the same level as that in the AB group. CO3Ap is gradually absorbed by osteoclasts in the extraction socket and is easily replaced by alveolar bone. The process of bone replacement by osteoclasts is similar to that of autologous bone. By observing the process of bone replacement in more detail, it may be possible to gain a better understanding of the bone formation and control the amount of bone after surgery.

Assessment of the Soft-Tissue Seal at the Interface between the Base of the Fixed Denture Pontic and the Oral Mucosa.

Fixed dentures (bridges) are often selected as a treatment option for a defective prosthesis. In this study, we assess the contact condition between the base of the pontic and oral mucosa, and examine the effect of prosthetic preparation and material biocompatibility. The molars were removed and replaced with experimental implants with a free-end type bridge superstructure after one week. In Experiment 1, we assessed different types of prosthetic pre-treatment: (1) the untreated control group (Con: mucosa recovering from the tooth extraction); (2) the laser irradiation group (Las: mucosa recovering after the damage caused by a CO2 laser); and (3) the tooth extraction group (Ext: mucosa recovering immediately after the teeth extraction). In Experiment 2, five materials (titanium, zirconia, porcelain, gold-platinum alloy, and self-curing resin) were placed at the base of the bridge pontic. Four weeks after the placement of the bridge, the mucosa adjacent to the pontic base was histologically analyzed. In Experiment 1, the Con and Las groups exhibited no formation of an epithelial sealing structure on the pontic base. In the Ext group, adherent epithelium was observed. In Experiment 2, the sealing properties at the pontic interface were superior for titanium and the zirconia compared with those made of porcelain or gold-platinum alloy. In the resin group, a clear delay in epithelial healing was observed.

Soft Tissue Interface with Various Kinds of Implant Abutment Materials.

Various materials, such as titanium, zirconia and platinum-gold (Pt-Au) alloy, have been utilized for dental implant trans-mucosal parts. However, biological understanding of soft tissue reaction toward these materials is limited. The aim of this study was to compare the response of cell lines and soft tissue to titanium, zirconia and Pt-Au substrata. The surface hydroxyl groups and protein adsorption capacities of the substrata were measured. Next, gingival epithelial-like cells (Sa3) and fibroblastic cells (NIH3T3) were cultured on the materials, and initial cell attachment was measured. Immuno-fluorescent staining of cell adhesion molecules and cytoskeletal proteins was also performed. In the rat model, experimental implants constructed from various materials were inserted into the maxillary tooth extraction socket and the soft tissue was examined histologically and immunohistochemically. No significant differences among the materials were observed regarding the amount of surface hydroxyl groups and protein adsorption capacity. Significantly fewer cells of Sa3 and NIH3T3 adhered to the Pt-Au alloy compared to the other materials. The expression of cell adhesion molecules and a well-developed cytoskeleton was observed, both Sa3 and NIH3T3 on each material. In an animal model, soft tissue with supracrestal tissue attachment was observed around each material. Laminin-5 immuno-reactivity was seen in epithelia on both titanium and zirconia, but only in the bottom of epithelia on Pt-Au alloy. In conclusion, both titanium and zirconia, but not Pt-Au alloy, displayed excellent cell adhesion properties.

The need for polishing and occlusal adjustment of zirconia prostheses for wear on antagonist teeth.

The attrition of enamel when opposed by ceramics is of great concern. The purpose of this study was to evaluate enamel wear against high translucent zirconia (Zr), lithium disilicate (LD), gold (Au), and enamel (E) with different surface and contact conditions. The materials were divided into two groups: polished and ground (n=8 each). Two-body wear tests were performed against human enamel with vertical and horizontal, horizontal, and vertical repetitive movements as experiments 1 to 3 respectively. The surface roughness of all materials except Zr changed throughout the experiments. In experiment 1, Zr and Au showed less antagonist wear when polished than when ground. In experiment 2, polished groups showed less antagonist wear than ground groups in all materials. In experiment 3, Zr and LD exerted greater antagonist wear than E, regardless of Ra. These findings confirm the importance of polishing and occlusal adjustment of zirconia.

Relationship between Maximum Tongue Pressure Value and Age, Occlusal Status, or Body Mass Index among the Community-Dwelling Elderly.

Background and objectives: In an aging society, the maintenance of the oral function of the elderly is of importance for the delay or prevention of frailty and long-term care. In the present study, we focused on the maximum tongue pressure (MTP) value and analyzed the relationship between MTP and age, occlusal status, or body mass index (BMI). Materials and Methods: This one-center observatory study was conducted using a cohort consisting of 205 community-dwelling outpatients over 65 years old. The MTP values of all subjects were measured using a commercially available tongue pressure measurement device and statistically analyzed. In addition, the correlation between MTP value and BMI was analyzed. Results: The MTP value decreased with age, especially in subjects classified as Eichner B and C. The difference in occlusal status did not show any statistically significant influence on MTP value. The correlation between BMI and MTP value was indicated in the tested groups other than an age of 65-74 and Eichner A groups. Conclusions: Although MTP value decreased with age, the difference in occlusal status did not have an impact on MTP value. The correlation between BMI and MTP value was not shown in the youngest group or a group with sufficient occlusal units. The results presented in the present study may imply that, even if MTP is low, younger age and/or better occlusal status compensate for the inferior MTP value in the cohort studied.

Localization of Integrin Beta-4 Subunit at Soft Tissue-Titanium or Zirconia Interface.

Currently, along with titanium (Ti), zirconia is widely used as an abutment material for dental implants because it makes it possible to avoid gingival discoloration; however, the epithelial sealing capability of zirconia remains unknown. The purpose of the present study is to elucidate the localization of integrin ß4 subunit (Inß4), one of the main proteins in the attachment structure between gingival junctional epithelial (JE) cells and substrata. Maxillary first molars were extracted from rats, and implants were placed with Ti or zirconia transgingival parts; then, the localization of Inß4 was observed. Morphological and functional changes in rat oral epithelial cells (OECs) cultured on a culture dish (Dish) and Ti and zirconia plates were also evaluated with Inß4 immunofluorescence histochemistry and Western blotting. After four weeks of implant placement, the morphology of the peri-implant epithelium (PIE) and the localization of Inß4 around the Ti and zirconia transgingival parts were similar. However, both exhibited markedly shorter Inß4-positive bands in the PIE than in the JE around natural teeth. Decreased expression levels of Inß4 were observed in OECs cultured on Ti and zirconia plates compared with those cultured on Dish. In conclusion, although inferior to natural teeth, zirconia implants are thought to have epithelial sealing properties comparable to those of titanium.

Effect of Calcium Chloride Hydrothermal Treatment of Titanium on Protein, Cellular, and Bacterial Adhesion Properties.

Topographical modification of the dental implant surface is one of the main topics for the improvement of the material, however, the roughened surface has some risks for peri-implantitis. A hydrothermal treatment (HT) of titanium with calcium chloride solution was reported to improve osseointegration and soft tissue sealing without changing the surface topography; however, its mechanism is unclear. We herewith investigated the interaction between extracellular matrix (ECM) protein and HT titanium. Furthermore, we also clarified the bacterial interaction. We employed two kinds of HT, HT with water (DW-HT) and HT with calcium chloride solution (Ca-HT). As a result, the adsorptions of both laminin-332 and osteopontin onto the Ca-HT surface were enhanced. In contrast, the adsorption of albumin, which was reported to have no cell adhesion capacity, was not influenced by Ca-HT. Osteoblast adhesion onto Ca-HT was also enhanced. Although Ca-HT was reported to enhance both epithelial cell attachment strength and in vivo peri-implant epithelial bonding, the number of epithelial cell attachment was not increased even after HT. Ca-HT had no impact in the adhesion of Streptococcus gordonii. These results suggest that Ca-HT enhances cell adhesion onto titanium without increasing bacterial adhesion, and the improvement of ECM protein adsorption is supposed to contribute to cell adhesion.

Effect of titanium or zirconia implant abutments on epithelial attachments after ultrasonic cleaning.

Zirconia is widely employed as a material during dental implant work because of its superior esthetics. This study sought to evaluate the impact of titanium or zirconia implant abutments on epithelial attachments after ultrasonic cleaning. These implants were inserted into the extraction socket of rat maxillary first molars. Then, the length of the horseradish peroxidase (HRP) reaction was measured. In addition, titanium and zirconia disks were cleaned using an ultrasonic scaler, surface morphology changes were observed, and the number of epithelial cell attachments to the surface was measured. Ultimately, the surfaces of the titanium disks were easier to damage than those of the zirconia ones. There was no difference in the number of epithelial cell attachments between the two materials with the ultrasonic cleaning. The length of the HRP reaction was shorter on the zirconia implant abutment surface than on the titanium one after mechanical cleaning. In conclusion, zirconia is harder than titanium and a better choice for use in the epithelial tissue attachment. Zirconia is more suitable as a material for implant abutments than titanium.

Effects of Different Divalent Cation Hydrothermal Treatments of Titanium Implant Surfaces for Epithelial Tissue Sealing.

The improvement of peri-implant epithelium (PIE) adhesion to titanium (Ti) may promote Ti dental implant stability. This study aims to investigate whether there is a positive effect of Ti hydrothermally treated (HT) with calcium chloride (CaCl2), zinc chloride (ZnCl2), and strontium chloride (SrCl2) on promoting PIE sealing. We analyzed the response of a rat oral epithelial cell (OEC) culture and performed an in vivo study in which the maxillary right first molars of rats were extracted and replaced with calcium (Ca)-HT, zinc (Zn)-HT, strontium (Sr)-HT, or non-treated control (Cont) implants. The OEC adhesion on Ca-HT and Zn-HT Ti plates had a higher expression of adhesion proteins than cells on the Cont and Sr-HT Ti plates. Additionally, the implant PIE of the Ca-HT and Zn-HT groups revealed better expression of immunoreactive laminin-332 (Ln-322) at 2 weeks after implantation. The Ca-HT and Zn-HT groups also showed better attachment at the implant-PIE interface, which inhibited horseradish peroxidase penetration. These results demonstrated that the divalent cations of Ca (Ca2+) and Zn (Zn2+)-HT improve the integration of epithelium around the implant, which may facilitate the creation of a soft barrier around the implant to protect it from foreign body penetration.

Preventive effect of fluvastatin on the development of medication-related osteonecrosis of the jaw.

Medication-related osteonecrosis of the jaw (MRONJ) occurs in patients undergoing oral surgery while medicated with bisphosphonate, denosumab or anti-angiogenic agents. We employed a MRONJ-like rat model to investigate whether injecting fluvastatin at extraction sites prevents MRONJ-like lesion. A MRONJ-like model was created by treating rats with zoledronate and dexamethasone, extracting teeth, and immediately injecting fluvastatin at the extraction site. The experimental group comprised three subgroups treated with low (0.1 mg/kg; FS-L), medium (1.0 mg/kg; FS-M) and high concentrations (10 mg/kg; FS-H) of fluvastatin. Necrotic bone exposure was significantly lower in the FS-M (p = 0.028) and FS-H (p = 0.041) groups than in the MRONJ group. The distance between the edges of the epithelial surfaces was significantly shorter in the FS-M (p = 0.042) and FS-H (p = 0.041) groups. The area of necrotic bone and the necrotic bone ratio were significantly smaller in the FS-H group (p = 0.041 and p = 0.042 respectively). Bone volume fraction calculated on µ-CT images was significantly larger in the FS-H group than in the MRONJ group (p = 0.021). Our findings suggest that a single local injection of fluvastatin following tooth extraction can potentially reduce the chance of developing MRONJ-like lesion in rats.

The impact of surface alteration on epithelial tissue attachment after the mechanical cleaning of titanium or zirconia surface.

OBJECTIVE: Mechanical plaque removal may alter the surface morphology of the gingival penetration part of the implant. We applied an air-powered abrasive system (AP), titanium curette (TC), stainless curette (SC), ultrasound scaler (US), and titanium brush (TB) which are commonly used to remove plaque, to titanium or zirconia and the changes in surface morphology and the epithelial attach against substrata. MATERIALS AND METHODS: (a) The morphological changes of titanium and zirconia after mechanical cleaning were assessed by scanning electron microscopy and a roughness analyser. (b) Oral epithelial cells of rats were inoculated on the surface of the materials after mechanical cleaning, and the adherence of epithelial cells was observed. (c) The maxillary first molars were extracted from the rats and replaced by experimental titanium or zirconia implants. The length of the immunoreactive laminin-332 band was observed at the implant-peri-implant epithelium interface. RESULTS: (a) The surface roughness increased in experimental groups except the AP group. (b) Among the experimental groups, the AP group showed the highest number of attached cells. (c) The length of the immunoreactive laminin-332 band was longer in the control group than those in all five experimental groups. Among the experimental groups, the AP group showed the longest band. CONCLUSION: All mechanical cleaning methods increased the surface roughness of the materials except AP. AP did not cause distinct implant surface alterations. Surface alteration caused by mechanical cleaning may evoke inferior for epithelial attachment and reduce resistance against foreign infiltration.