RESUMO
PURPOSE: To optimize the biomechanical performance of S2AI screw fixation using a genetic algorithm (GA) and patient-specific finite element analysis integrating bone mechanical properties. METHODS: Patient-specific pelvic finite element models (FEM), including one normal and one osteoporotic model, were created from bi-planar multi-energy X-rays (BMEXs). The genetic algorithm (GA) optimized screw parameters based on bone mass quality (BM method) while a comparative optimization method maximized the screw corridor radius (GEO method). Biomechanical performance was evaluated through simulations, comparing both methods using pullout and toggle tests. RESULTS: The optimal screw trajectory using the BM method was more lateral and caudal with insertion angles ranging from 49° to 66° (sagittal plane) and 29° to 35° (transverse plane). In comparison, the GEO method had ranges of 44° to 54° and 24° to 30° respectively. Pullout forces (PF) using the BM method ranged from 5 to 18.4 kN, which were 2.4 times higher than the GEO method (2.1-7.7 kN). Toggle loading generated failure forces between 0.8 and 10.1 kN (BM method) and 0.9-2.9 kN (GEO method). The bone mass surrounding the screw representing the fitness score and PF of the osteoporotic case were correlated (R2 > 0.8). CONCLUSION: Our study proposed a patient-specific FEM to optimize the S2AI screw size and trajectory using a robust BM approach with GA. This approach considers surgical constraints and consistently improves fixation performance.
Assuntos
Algoritmos , Parafusos Ósseos , Análise de Elementos Finitos , Ílio , Humanos , Fenômenos Biomecânicos , Ílio/cirurgia , Sacro/cirurgia , Sacro/diagnóstico por imagem , Fusão Vertebral/métodos , Fusão Vertebral/instrumentação , Feminino , Osteoporose/cirurgia , Adulto , MasculinoRESUMO
Adolescent idiopathic scoliosis is a complex three-dimensional deformity of the spine, the moderate forms of which require treatment with an orthopedic brace. Existing brace design approaches rely mainly on empirical manual processes, vary considerably depending on the training and expertise of the orthotist, and do not always guarantee biomechanical effectiveness. To address these issues, we propose a new automated design method for creating bespoke nighttime braces requiring virtually no user input in the process. From standard biplanar radiographs and a surface topography torso scan, a personalized finite element model of the patient is created to simulate bracing and the resulting spine growth over the treatment period. Then, the topography of an automatically generated brace is modified and simulated over hundreds of iterations by a clinically driven optimization algorithm aiming to improve brace immediate and long-term effectiveness while respecting safety thresholds. This method was clinically tested on 17 patients prospectively recruited. The optimized braces showed a highly effective immediate correction of the thoracic and lumbar curves (70% and 90% respectively), with no modifications needed to fit the braces onto the patients. In addition, the simulated lumbar lordosis and thoracic apical rotation were improved by 5° ± 3° and 2° ± 3° respectively. Our approach distinguishes from traditional brace design as it relies solely on biomechanically validated models of the patient's digital twin and a design strategy that is entirely abstracted from empirical knowledge. It provides clinicians with an efficient way to create effective braces without relying on lengthy manual processes and variable orthotist expertise to ensure a proper correction of scoliosis.
Assuntos
Cifose , Lordose , Escoliose , Humanos , Adolescente , Escoliose/diagnóstico por imagem , Escoliose/terapia , Análise de Elementos Finitos , Coluna Vertebral , Cifose/terapiaRESUMO
INTRODUCTION: Adolescent Idiopathic Scoliosis (AIS) is a 3D deformity of the spine that affects 3% of the adolescent population. Conservative treatments like bracing aim to halt the progression of the curve to the surgical threshold. Computer-aided design and manufacturing (CAD/CAM) methods for brace design and manufacturing are becoming increasingly used. Linked to CAD/CAM and 3D radiographic reconstruction techniques, we developed a finite element model (FEM) enabling to simulate the brace effectiveness before its fabrication, as well as a semi-automatic design processes. The objective of this randomized controlled trial is to compare and validate such FEM semi-automatic algorithm used to design nighttime Providence-type braces. METHODS AND ANALYSIS: Fifty-eight patients with AIS aged between 10 to 16-years and skeletally immature will be recruited. At the delivery stage, all patients will receive both a Providence-type brace optimized by the semi-automatic algorithm leveraging a patient-specific FEM (Test) and a conventional Providence-type brace (Control), both designed using CAD/CAM methods. Biplanar radiographs will be taken for each patient with both braces in a randomized crossover approach to evaluate immediate correction. Patients will then be randomized to keep either the Test or Control brace as prescribed with a renewal if necessary, and will be followed over two years. The primary outcome will be the change in Cobb angle of the main curve after two years. Secondary outcomes will be brace failure rate, quality of life (QoL) and immediate in-brace correction. This is a single-centre study, double-blinded (participant and outcome assessor) randomized controlled trial (RCT). TRIAL REGISTRATION NUMBER: ClinicalTrials.gov: NCT05001568.
Assuntos
Cifose , Escoliose , Humanos , Adolescente , Criança , Escoliose/diagnóstico por imagem , Escoliose/terapia , Coluna Vertebral , Radiografia , Tratamento Conservador/métodos , Resultado do Tratamento , Ensaios Clínicos Controlados Aleatórios como AssuntoRESUMO
BACKGROUND: Severe adolescent idiopathic scoliosis (AIS) can be treated with instrumented fusion, but the number of anchors needed for optimal correction is controversial. METHODS: We conducted a multicenter, randomized study that included patients undergoing spinal fusion for single thoracic curves between 45° and 65°, the most common form of operatively treated AIS. Of the 211 patients randomized, 108 were assigned to a high-density screw pattern and 103, to a low-density screw pattern. Surgeons were instructed to use ≥1.8 implants per spinal level fused for patients in the high-implant-density group or ≤1.4 implants per spinal level fused for patients in the low-implant-density group. The primary outcome measure was the percent correction of the coronal curve at the 2-year follow-up. The power analysis for this trial required 174 patients to show equivalence, defined as a 95% confidence interval (CI) within a ±10% correction margin with a probability of 90%. RESULTS: In the intention-to-treat analysis, the mean percent correction of the coronal curve was equivalent between the high-density and low-density groups at the 2-year follow-up (67.6% versus 65.7%; difference, -1.9% [95% CI: -6.1%, 2.2%]). In the per-protocol cohorts, the mean percent correction of the coronal curve was also equivalent between the 2 groups at the 2-year follow-up (65.0% versus 66.1%; difference, 1.1% [95% CI: -3.0%, 5.2%]). A total of 6 patients in the low-density group and 5 patients in the high-density group required reoperation (p = 1.0). CONCLUSIONS: In the setting of spinal fusion for primary thoracic AIS curves between 45° and 65°, the percent coronal curve correction obtained with use of a low-implant-density construct and that obtained with use of a high-implant-density construct were equivalent. LEVEL OF EVIDENCE: Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.
Assuntos
Cifose , Escoliose , Fusão Vertebral , Humanos , Adolescente , Escoliose/cirurgia , Resultado do Tratamento , Parafusos Ósseos , Cifose/cirurgia , Fusão Vertebral/métodos , Vértebras Torácicas/cirurgia , Estudos RetrospectivosRESUMO
The increasing prevalence of adult spinal deformity requires long spino-pelvic instrumentation, but pelvic fixation faces challenges due to distal forces and reduced bone quality. Bi-planar multi-energy X-rays (BMEX) were used to develop a patient-specific finite element model (FEM) for evaluating pelvic fixation. Calibration involved 10 patients, and an 81-year-old female test case was used for FEM customization and pullout simulation validation. Calibration yielded a root mean square error of 74.7 mg/cm3 for HU. The simulation accurately replicated the experimental pullout test with a force of 565 N, highlighting the method's potential for optimizing biomechanical performance for pelvic fixation.
RESUMO
OBJECTIVE: To develop a methodology to improve the representation of the mechanical properties of a vertebral finite element model (FEM) based on a new dual-energy (DE) imaging technology to improve pedicle screw fixation. METHODS: Bone-calibrated radiographs were generated with dual-energy imaging technology in order to estimate the mechanical properties of the trabecular bone. Properties were included in regions of interest in four vertebral FEMs representing heterogeneity and homogeneity, as a realistic and reference model, respectively. Biomechanical parameters were measured during screw pull-out testing to evaluate pedicle screw fixation. RESULTS: Simulations with property distributions deduced from dual-energy imaging characterization (heterogeneous models) induced an increase in biomechanical indicators versus with a homogeneous representation, implying different behaviors for the subject-specific models. CONCLUSION: The presented methodology allows a patient-specific representation of bone quality in a FEM using new DE imaging technology. Consideration of individualized bone distribution in a spinal FEM improves the perspective of orthopedic surgical planning over otherwise underestimated results using a homogeneous representation.
Assuntos
Procedimentos Ortopédicos , Parafusos Pediculares , Humanos , Coluna Vertebral , Osso EsponjosoRESUMO
Background: Artificial intelligence is a revolutionary technology that promises to assist clinicians in improving patient care. In radiology, deep learning (DL) is widely used in clinical decision aids due to its ability to analyze complex patterns and images. It allows for rapid, enhanced data, and imaging analysis, from diagnosis to outcome prediction. The purpose of this study was to evaluate the current literature and clinical utilization of DL in spine imaging. Methods: This study is a scoping review and utilized the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology to review the scientific literature from 2012 to 2021. A search in PubMed, Web of Science, Embased, and IEEE Xplore databases with syntax specific for DL and medical imaging in spine care applications was conducted to collect all original publications on the subject. Specific data was extracted from the available literature, including algorithm application, algorithms tested, database type and size, algorithm training method, and outcome of interest. Results: A total of 365 studies (total sample of 232,394 patients) were included and grouped into 4 general applications: diagnostic tools, clinical decision support tools, automated clinical/instrumentation assessment, and clinical outcome prediction. Notable disparities exist in the selected algorithms and the training across multiple disparate databases. The most frequently used algorithms were U-Net and ResNet. A DL model was developed and validated in 92% of included studies, while a pre-existing DL model was investigated in 8%. Of all developed models, only 15% of them have been externally validated. Conclusions: Based on this scoping review, DL in spine imaging is used in a broad range of clinical applications, particularly for diagnosing spinal conditions. There is a wide variety of DL algorithms, database characteristics, and training methods. Future studies should focus on external validation of existing models before bringing them into clinical use.
RESUMO
PURPOSE: To assess biomechanical differences between AIS instrumentations using concave vs. convex rod first. METHODS: Instrumentations of ten AIS patients were simulated first with major correction maneuvers using the concave rod then with convex rod. Correction maneuvers were concave/convex rod translation, followed by apical vertebral derotation and then convex/concave rod translation. The concave/convex rods were 5.5/5.5 and 6.0/5.5 mm diameter Co-Cr and contoured to 35°/15°, 55°/15°, 75°/15° and 85°/15°, respectively. RESULTS: Differences in simulated thoracic Cobb angle (MT), thoracic kyphosis (TK) and apical vertebral rotation (AVR) were less than 5° between the two techniques; mean bone-screw force difference was less then 15N (p > 0.1). Increasing differential contouring angle from 35°/15° to 85°/15°, the MT changed from 14 ± 7° to 15 ± 8°, AVR from 12 ± 4° to 6 ± 5°, TK from 23 ± 4° to 42 ± 4°, and bone-screw forces from 159 ± 88N to 329 ± 170N (P < 0.05). Increasing the concave rod diameter from 5.5 to 6 mm, the mean MT correction improvement for both techniques was less than 2°, the AVR correction was improved by 2°, the TK increased by 4° and bone-screw force increased by about 25N (p < 0.05). CONCLUSION: There was no significant difference in deformity corrections and bone-screw forces between the two techniques. Increasing differential contouring angle and rod diameter improved AVR and TK corrections with no significant effect on the MT Cobb angle. Although this study simplified the complexity of a generic surgical technique, the main effects of a limited number of identical steps were replicated for each case in a systematic manner to analyze the main first-order effects.
RESUMO
STUDY DESIGN: Computer simulation of adolescent idiopathic scoliosis instrumentation. OBJECTIVE: To test the hypothesis that different screw densities would result in different apical vertebral rotation (AVR) corrections and bone-screw forces in adolescent idiopathic scoliosis instrumentation. SUMMARY OF BACKGROUND DATA: The "Minimize Implants Maximize Outcomes" Clinical Trial revealed that the use of more versus fewer screws resulted in similar coronal plane correction for Lenke 1A curves. However, the biomechanical impact of screw density on transverse plane correction is still unclear. Further investigation is needed to determine if and how transverse plane correction is correlated with screw density. PATIENTS AND METHODS: We simulated apical vertebral derotation after segmental translation using patient-specific computer models of 30 patients from the "Minimize Implants Maximize Outcomes" Trial. For each case, 10 alternative screw patterns were tested with overall densities ranging between 1.2 and 2 screws per level fused, and local density at the 3 apical levels ranging between 0.7 and 2 (total: 600 simulations). Main thoracic (MT) Cobb angle, thoracic kyphosis (TK), AVR, and bone-screw forces were computed and compared. RESULTS: The presenting MT (62 ± 11°; range: 45° to 86°), TK (27 ± 20°; -5° to 81°), and AVR (14±7°; -2° to 25°) were corrected through segmental translation to 22 ± 7° (10° to 41°), 26 ± 5° (18° to 45°), and 14 ± 7° (-4° to 26°). After apical vertebral derotation, they became 16 ± 8° (1° to 41°), 24 ± 4° (13° to 40°), and 4 ± 5° (-12° to 18°). There was no significant difference in MT among screw patterns; higher screw density had lower bone-screw forces ( P < 0.05). The apical vertebral derotation maneuver reduced AVR by an average of 70%, positively correlated with apical screw density ( r = 0.825, P < 0.05). There was no significant difference in TK. CONCLUSION: Screw density had no significant effect on 3-dimensional correction through the primary segmental translation maneuver. Transverse plane correction through subsequent apical vertebral derotation was positively correlated with screw density at the apical levels ( r = 0.825, P < 0.05). Bone-screw forces were negatively correlated with overall screw density ( P < 0.05).
Assuntos
Cifose , Parafusos Pediculares , Escoliose , Fusão Vertebral , Humanos , Adolescente , Escoliose/diagnóstico por imagem , Escoliose/cirurgia , Simulação por Computador , Vértebras Torácicas/diagnóstico por imagem , Vértebras Torácicas/cirurgia , Resultado do Tratamento , Fusão Vertebral/métodos , Cifose/diagnóstico por imagem , Cifose/cirurgiaRESUMO
PURPOSE: To biomechanically evaluate 3D corrective forces and deformity correction attributable to key parameters of rod contouring in posterior spinal fusion (PSF) for adolescent idiopathic scoliosis (AIS). METHODS: Computerised patient-specific biomechanical models of six AIS cases were used to simulate PSF and evaluate the effects of 5.5-mm cobalt-chrome rod contouring angle (concave-convex angles: 30°-15°, 45°-15° and 60°-15°), length (spanning 4 and 7 vertebrae), and apex location (T7, T9). 3D correction and bone-implant forces were computed and analysed. RESULTS: By increasing the concave rod contour from 30° to 60°, thoracic kyphosis (TK) increased from 18° ± 2° (15°-19°) to 24° ± 2° (22°-26°), apical vertebra rotation (AVR) correction increased from 41% (SD8%) to 66% (SD18%) whilst the main thoracic curve (MT) correction decreased from 68% (SD6%) to 56% (SD8%). With a contouring length of 4 vs. 7 vertebrae, the resulting TK, AVR and MT corrections were 22° ± 1° (19°-26°) vs. 19° ± 10° (15°-22°), 57% (SD18%) vs. 50% (SD26%) and 59% (SD1%) vs. 69% (SD35%), respectively. With the rod contouring apex at T7 (vs. T9), AVR corrections were 69% (SD19%) vs. 44% (SD9%), with no significant difference in TK and MT corrections, and with comparatively 67% of screw pull-out forces. Corrective forces were more evenly shared with fixation on 7 vs. 4 vertebrae. CONCLUSION: Rod contouring of a greater angulation, over a shorter portion of the rod, and more centred at the apex of the main thoracic curve apex improved AVR correction and allowed greater restoration of TK, but resulted in significantly higher screw pull-out forces and came at the expense of less coronal plane correction.
RESUMO
PURPOSE: Vertebral body tethering (VBT) is a fusionless spinal growth modulation technique, which shows promise for pediatric idiopathic scoliosis (IS) curve correction. This technique, mainly used for thoracic curves, is increasingly being used to treat lumbar curves in order to preserve spine flexibility. It remains necessary to adequately define the cord tension to be applied during the operation and the instrumented levels to biomechanically predict correction over time for the lumbar spine. METHODS: Twelve pediatric patients with lumbar IS, treated with lumbar-only or lumbar and thoracic VBT, were selected for this study. Three independent variables were tested alternately using a patient-specific finite element model (FEM), which includes an algorithm modeling vertebra growth and spine curve changes due to growth modulation for 24 months post-operatively according to the Hueter-Volkmann principle. Parameters included cable tensioning (150N/250N), upper instrumented level (actual UIV, UIV-1) and lower instrumented level (actual LIV, LIV + 1). Each FEM was personalized using 3D radiographic reconstruction and flexibility supine radiographs. RESULT: An increase in cord tension (from 150 to 250N) had significant effects on main thoracic and thoraco-lumbar/lumbar Cobb angles, as well as on lumbar lordosis, after surgery (supplementary average correction of 3° and 8°, and increase of 1.4°, respectively) and after 24 months (4°, 10° and 1.1°) (p < 0.05). Adding a level to the actual UIV or LIV did not improve correction. CONCLUSION: This parametric study showed that cord tension is the most important biomechanical parameter on the simulated immediate and 2-year increase in lumbar curve correction. Our preliminary model suggests that it is not advantageous to add additional instrumented levels. LEVEL OF EVIDENCE: This computational study uses a retrospective validation cohort (level of evidence 3).
Assuntos
Escoliose , Corpo Vertebral , Animais , Humanos , Criança , Estudos Retrospectivos , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Escoliose/diagnóstico por imagem , Escoliose/cirurgia , Vértebras Torácicas/diagnóstico por imagem , Vértebras Torácicas/cirurgiaRESUMO
Adolescent idiopathic scoliosis (AIS) is a spine deformity whose progression during growth is affected by asymmetrical loads acting on the spine. The conservative brace treatment aims to limit the deformity's progression until the end of skeletal growth. This study's objective was to develop a patient-specific finite element model (FEM) simulating immediate in-brace (IB) correction and subsequent growth modulation over 2 years of treatment. Thirty-five retrospective AIS cases with documented correction over 2 years were analyzed. For each case, a patient-specific FEM was built and IB correction was simulated. Vertebral growth and its modulation were modeled using simulated pressures on epiphyseal vertebral growth plates, including a compliance factor representing the recorded brace wear. The simulated Cobb angles, thoracic kyphosis, lumbar lordosis, and apical vertebral rotation were compared with the actual measurements immediately IB and out-of-brace (OOB) at the 2-year follow-up. Treatment outcomes according to simulated compliance scenarios of no brace-wear versus full brace-wear were also computed. The average immediate IB difference between the simulated and actual Cobb angle was 4.9° (main thoracic [MT]) and 3.7° (thoraco-lumbar/lumbar [TL/L]). Two-year OOB, it was 5.6° (MT) and 5.4° (TL/L). The no brace-wear and full brace-wear compliance scenarios resulted respectively in 15/35 (43%) and 31/35 (89%) simulated spine deformities progressing by <5° over 2 years of treatment. Clinical significance: the FEM's ability to simulate the final correction with an accuracy on the order of the radiological measurements' interoperator reproducibility, combined with its sensitivity to brace-wear compliance, provides confidence in the model's predictions for a comparative context of use like improving a brace's design before its application.
Assuntos
Cifose , Escoliose , Humanos , Adolescente , Escoliose/terapia , Estudos Retrospectivos , Análise de Elementos Finitos , Reprodutibilidade dos Testes , Cifose/terapia , Resultado do Tratamento , BraquetesRESUMO
INTRODUCTION: Simulation-based research has played an important role in improving care for communicable diseases. Unfortunately, few studies have attempted to quantify the level of contamination in these simulation activities. We aim to assess the feasibility and provide validity evidence for using integrated density values and area of contamination (AOC) to differentiate various levels of simulated contamination. METHODS: An increasing number of simulated contamination spots using fluorescent marker were applied on a manikin chest to simulate a contaminated healthcare provider. An ultraviolet light was used to illuminate the manikin to highlight the simulated contamination. Images of increasing contamination levels were captured using a camera with different exposure settings. Image processing software was used to measure 2 outcomes: (1) natural logarithm of integrated density; and (2) AOC. Mixed-effects linear regression models were used to assess the effect of contamination levels and exposure settings on both outcome measures. A standardized "proof-of-concept" exercise was set up to calibrate and formalize the process for human subjects. RESULTS: A total of 140 images were included in the analyses. Dose-response relationships were observed between contamination levels and both outcome measures. For each increment in the number of contaminated simulation spots (ie, simulated contaminated area increased by 38.5 mm 2 ), on average, log-integrated density increased by 0.009 (95% confidence interval, 0.006-0.012; P < 0.001) and measured AOC increased by 37.8 mm 2 (95% confidence interval, 36.7-38.8 mm 2 ; P < 0.001), which is very close to actual value (38.5 mm 2 ). The "proof-of-concept" demonstration further verified results. CONCLUSIONS: Integrated density and AOC measured by image processing can differentiate various levels of simulated, fluorescent contamination. The AOC measured highly agrees with the actual value. This method should be optimized and used in the future research to detect simulated contamination deposited on healthcare providers.
Assuntos
Pessoal de Saúde , Humanos , Simulação por ComputadorRESUMO
STUDY DESIGN: Assessment of different proximal instrumentation stiffness features to minimize the mechanical proximal junctional failure-related risks through computer-based biomechanical models. OBJECTIVE: To biomechanically assess variations of proximal instrumentation and loads acting on the spine and construct to minimize proximal junctional failure (PJF) risks. The use of less-stiff fixation such as hooks or tensioned bands, compared to pedicle screws, at the proximal instrumentation level are considered to allow for a gradual transition in stiffness with the adjacent levels, but the impact of such flexible fixation on the loads balance and complications such as PJF remain uncertain. METHODS: Six patients with adult spine deformity who underwent posterior spinal instrumentation were used to numerically model and simulate the surgical steps, erected posture, and flexion functional loading in patient-specific multibody analyses. Three types of upper-level fixation (pedicle screws (PS), supralaminar hooks (SH), and sublaminar bands (SB) with tensions of 50, 250, and 350 N) and rod stiffness (CoCr/6 mm, CoCr/5.5 mm, Ti/5.5 mm) were simulated. The loads acting on the spine and implants of the 90 simulated configurations were analyzed using Kruskal-Wallis statistical tests. RESULTS: Simulated high-tensioned bands decreased the sagittal moment at the adjacent level proximal to the instrumentation (1.3 Nm at 250 N; 2.5 Nm at 350 N) compared to screws alone (PS) (15.6 Nm). At one level above, the high-tensioned SB increased the sagittal moment (17.7 Nm-SB vs. 15.5 Nm-PS) and bending moment on the rods (5.4 Nm and 5.7 Nm vs. 0.6 Nm) (p < 0.05). SB with 50 N tension yielded smaller changes in load transition compared to higher tension, with moments of 8.1 Nm and 16.8 Nm one and two levels above the instrumentation. The sagittal moment at the upper implant-vertebra connection decreased with the rod stiffness (1.0 Nm for CoCr/6 mm vs. 0.7 Nm for Ti/5.5 mm; p < 0.05). CONCLUSION: Simulated sublaminar bands with lower tension produced smaller changes in the load transition across proximal junctional levels. Decreasing the rod stiffness further modified these changes, with a decrease in loads associated with bone failure, however, lower stiffness did increase the rod breakage risk. LEVEL OF EVIDENCE: N/A.
Assuntos
Vértebras Lombares , Parafusos Pediculares , Humanos , Adulto , Vértebras Lombares/cirurgia , Vértebras Torácicas/cirurgia , Simulação por Computador , Amplitude de Movimento ArticularRESUMO
STUDY DESIGN: Assessment of sagittal lordosis distribution on mechanical proximal junctional failure-related risks through computer-based biomechanical models. OBJECTIVE: To biomechanically assess how lordosis distribution influences radiographical and biomechanical indices related to Proximal Junctional Failure (PJF). The "optimal" patient-specific targets to restore the sagittal balance in posterior spinal fusion are still not known. Among these, the effect of the lumbar lordosis correction strategy on complications such as PJF remain uncertain. METHODS: In this computational biomechanical study, five adult spinal deformity patients who underwent posterior spinal fixation were retrospectively reviewed. Their surgery, first erect posture and flexion movement were simulated with a patient-specific multibody model. Three pedicle subtraction osteotomy (PSO) levels (L3, L4, and L5) were simulated, with consistent global lordosis for a given patient and pelvic tilt adjusted accordingly to the actual surgery. Computed loads on the anterior spine and instrumentation were analyzed and compared using Kruskal-Wallis statistical tests and Spearman correlations. RESULTS: In these models, no significant correlations were found between the lordosis distribution index (LDI), PSO level and biomechanical PJF-related indices. However, increasing the sagittal vertical axis (SVA) and thoracolumbar junction angle (TLJ) and decreasing the sacral slope (SS) increased the bending moment sustained by the rods at the proximal instrumented level (r = 0.52, 0.57, - 0.56, respectively, p < 0.05). There was a negative correlation between SS and the bending moment held by the adjacent proximal segment (r = - 0.71, p < 0.05). CONCLUSION: Based on these biomechanical simulations, there was no correlation between the lordosis distribution and PJF-associated biomechanical factors. However, increasing SS and flattening the TLJ, as postural adjustment strategies required by a more distal PSO, did decrease such PJF-related factors. Sagittal restoration and PJF risks remain multifactorial, and the use of patient-specific biomechanical models may help to better understand the complex interrelated mechanisms.
Assuntos
Cifose , Lordose , Adulto , Humanos , Lordose/diagnóstico por imagem , Lordose/cirurgia , Estudos Retrospectivos , Cifose/cirurgia , Sacro , ReoperaçãoRESUMO
PURPOSE: Anterior Vertebral Body Tethering (AVBT), a fusionless surgical technique based on growth modulation, aims to correct pediatric scoliosis over time. However, medium-term curvature changes of the non-instrumented distal lumbar curve remains difficult to predict. The objective was to biomechanically analyze the level below the LIV to evaluate whether adding-on or compensatory lumbar curve after AVBT can be predicted by intervertebral disc (ID) wedging and force asymmetry. METHODS: 33 retrospective scoliotic cases instrumented with AVBT were used to computationally simulate their surgery and 2-year post-operative growth modulation using a finite element model. The cohort was divided into two subgroups according to the lumbar curvature evolution over 2 years: (1) correction > 10° (C); (2) maintaining ± 10° (M). The lumbar Cobb angle and residual ID wedging angle under LIV were measured. Simulated pressures and moments at the superior endplate of LIV + 1 were post-processed. These parameters were correlated at 2 years postoperatively. FINDINGS: On average, the LIV + 1 simulated moment was 538 Nmm for subgroup C, 155 Nmm for subgroup M with lumbar Cobb angle > 20° and 34 Nmm for angle < 20° whereas the ID angle was 1° for C and 0° for M. INTERPRETATION: On average, a positive moment on the LIV + 1 superior growth plate led to correction of the lumbar curvature, whereas a null moment kept it stable, and a parallel immediate postoperative ID under LIV contributed to its correction or preservation. Nevertheless, the significant interindividual variability suggested that other parameters are involved in the distal non-instrumented curvature evolution. LEVEL OF EVIDENCE: IV.
Assuntos
Escoliose , Fusão Vertebral , Humanos , Criança , Vértebras Lombares/cirurgia , Estudos Retrospectivos , Corpo Vertebral , Fusão Vertebral/métodos , Radiografia , Escoliose/cirurgia , Escoliose/diagnóstico por imagemRESUMO
BACKGROUND: Knee osteoarthritis (KOA) is increasingly prevalent in North American society. The significant societal burden it represents makes it essential to promote and target new treatments in earlier phases of the disease. Among others, subchondroplasty is a newly documented technique using calcium phosphate injection targeting the osteochondral lesions preceding KOA, also known as Bone Marrow Lesions (BMLs). This article aimed to review the existing literature on clinical and radiological outcomes of subchondroplasty in the treatment of BMLs in KOA. METHOD: A systematic review was performed using PubMed, Embase, Medline and Cochrane Database of Systematic Reviews. Studies on calcium phosphate injections into BMLs for KOA and its clinical and radiological outcomes were screened and reviewed by independent evaluators. RESULTS: After screening, ten articles were included, totaling 540 patients. Follow-up ranged from 6 months to 7 years. Overall, the procedure showed significant functional and quality of life improvement, as well as pain relief, as shown by Patients-Reported Outcomes Measures (PROMs). There were very few complications reported, the most important being leakage of calcium phosphate outside the targeted site. Conversion rate to total knee arthroplasty (TKA) ranged from 14 % to 30 % at 2 years post-procedure. Long term radiological outcomes have been poorly documented. CONCLUSIONS: Subchondroplasty is a promising avenue for the treatment of KOA. However, quality evidence is still required before any real conclusions and practical management guidelines can be drawn. Prospective, randomized studies with a control group and a rigorous assessment of long-term clinical and radiological outcomes are recommended.
Assuntos
Doenças Ósseas , Doenças das Cartilagens , Osteoartrite do Joelho , Humanos , Medula Óssea/diagnóstico por imagem , Medula Óssea/patologia , Qualidade de Vida , Estudos Prospectivos , Osteoartrite do Joelho/diagnóstico por imagem , Osteoartrite do Joelho/cirurgia , Osteoartrite do Joelho/patologia , Doenças das Cartilagens/cirurgia , Fosfatos de Cálcio/uso terapêuticoRESUMO
Background and Aim: The SplashGuard CG (SG) is a barrier enclosure developed to protect healthcare workers from SARS-CoV-2 transmission during aerosol-generating procedures. Our objective was to evaluate the protection provided by the SG against aerosolized particles (AP), using a pediatric simulation model of spontaneous ventilation (SV) and noninvasive ventilation (NIV). Methods: An aerosol generator was connected to the airways of a pediatric high-fidelity manikin with a breathing simulator. AP concentrations were measured both in SV and NIV in the following conditions: with and without SG, inside and outside the SG, with and without suction applied to the device. Results: In the SV simulated setting, AP peaks were lower with SG: 0.1 × 105 particles/L compared to without: 1.6 × 105, only when the ports were closed and suction applied. In the NIV simulated setting, AP peaks outside the SG were lower than without SG (20.5 × 105 particles/L), whatever the situation, without suction (14.4 × 105particles/L), with suction and ports open or closed: 10.3 and 0.7 × 105 particles/L. In SV and NIV simulated settings, the AP peaks measured within the SG were much higher than the AP peaks measured without SG, even when suction was applied to the device. Conclusions: The SG seems to decrease peak AP exposure in the 2 ventilation contexts, but only with closed port and suction in SV. However, high concentrations of AP remain inside even with suction and SG should be used cautiously.
Assuntos
Partículas e Gotas Aerossolizadas , COVID-19 , Humanos , Criança , SARS-CoV-2 , COVID-19/prevenção & controle , Aerossóis e Gotículas Respiratórios , SucçãoRESUMO
This review presents the state of the art according to the current evidence on nonoperative treatment for adolescent idiopathic scoliosis, focusing on bracing. The definition of braces for the treatment of adolescent idiopathic scoliosis and a short history are provided. The analysis includes biomechanics, types, existing classifications, indications for treatment, time of brace wear and weaning, adherence, three-dimensional modeling, use of ultrasound imaging for bracing, management of treatment, issue of immediate in-brace correction, and documentation of the outcomes usually assessed for brace treatment, including the quality-of-life issues. According to the current evidence, there are two randomized control trials in favor of bracing. There are insufficient data on the superiority of one brace over another, although it is possible to classify and grade braces for efficacy from nonrigid to rigid and very rigid. Nevertheless, there is consensus on patients' management on the need for teamwork focusing on adherence to treatment, acceptability, and family and patient involvement.