RESUMO
Cerium oxide nanoparticles possess unique properties that make them promising candidates in various fields, including cancer treatment. Among the proposed synthesis methods for CNPs, biosynthesis using natural extracts, offers an eco-friendly and convenient approach for producing CNPs, particularly for biomedical applications. In this study, a novel method of biosynthesis using the aqueous extract of Eucalyptus camaldulensis leaves was used to synthesize CNPs. Scanning electron microscopy and Transmission electron microscopy (TEM) techniques revealed that the synthesized CNPs exhibit a flower-like morphology. The particle size of CNPs obtained using Powder X-ray diffraction peaks and TEM as 13.43 and 39.25 nm. Energy-dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy confirmed the effect of biomolecules during the synthesis process and the formation of CNPs. The cytotoxicity of biosynthesized samples was evaluated using the MTT method demonstrating the potential of these samples to inhibit MCF-7 cancerous cells. The viability of the MCF-7 cell line conducted by live/dead imaging assay confirmed the MTT cytotoxicity method and indicated their potential to inhibit cancerous cells. Furthermore, the successful uptake of CNPs by MCF-7 cancer cells, as demonstrated by confocal microscopy, provides evidence that the intracellular pathway contributes to the anticancer activity of the CNPs. In general, results indicate that the biosynthesized CNPs exhibit significant cytotoxicity against the MCF-7 cancerous cell line, attributed to their high surface area.
Assuntos
Cério , Eucalyptus , Extratos Vegetais , Folhas de Planta , Humanos , Eucalyptus/química , Células MCF-7 , Folhas de Planta/química , Extratos Vegetais/farmacologia , Extratos Vegetais/química , Cério/química , Cério/farmacologia , Neoplasias da Mama/tratamento farmacológico , Neoplasias da Mama/patologia , Neoplasias da Mama/metabolismo , Sobrevivência Celular/efeitos dos fármacos , Feminino , Nanopartículas/química , Espectroscopia de Infravermelho com Transformada de Fourier , Antineoplásicos/farmacologia , Antineoplásicos/química , Tamanho da PartículaRESUMO
Phytosomes consist of a phytochemical bound to the hydrophilic choline head of a phospholipid. Their use in food products is gaining interest. However, literature on the use of food-grade solvents, crude plant extracts as opposed to pure compounds, and unrefined phospholipids to prepare phytosomes is limited. Furthermore, studies on compound stability are lacking. This study aimed to develop nano-phytosome vesicles prepared from inexpensive food-grade ingredients to improve the stability of polyphenolic compounds. Cyclopia subternata extract (CSE) was selected as a source of phenolic compounds. It contains substantial quantities of C-glucosyl xanthones, benzophenones, and dihydrochalcones, compounds largely neglected to date. The effect of process conditions on the complexation of CSE polyphenols with minimally refined food-grade fat-free soybean lecithin (PC) was studied. The PC:CSE ratio, sonication time, and reaction temperature were varied. This resulted in phytosomes ranging in vesicle size (113.7-312.7 nm), polydispersity index (0.31-0.48), and zeta potential (-55.0 to -38.9 mV). Variation was also observed in the yield (93.5%-96.0%), encapsulation efficiency (3.7%-79.0%), and loading capacity (LC, 1.3%-14.7%). Vesicle size and LC could be tailored by adjusting the sonication time and PC:CSE ratio, respectively. Chemical interaction between the lipid and the phenolic compounds was confirmed with nuclear magnetic resonance. Phytosomal formulation protected the compounds against degradation when freeze-dried samples were stored at 25 and 40°C for 6 months at low relative humidity. The study provided valuable information on the importance of specific process parameters in producing food-grade phytosomes with improved phenolic stability.
RESUMO
Crystalline carriers such as dextrose, sucrose, galactose, mannitol, sorbitol, and isomalt have been reported to increase the solubility, and dissolution rates of poorly soluble drugs when employed as carriers in solid dispersions (SDs). However, synthetic polymers dominate the preparation of drugs: excipient SDs have been created in recent years, but these polymer-based SDs exhibit the major drawback of recrystallisation upon storage. Also, the use of high-molecular-weight polymers with increased chain lengths brings forth problems such as increased viscosity and unnecessary bulkiness in the resulting dosage form. An ideal SD carrier should be hydrophilic, non-hygroscopic, have high hydrogen-bonding propensity, have a high glass transition temperature (Tg), and be safe to use. This review discusses sugars and polyols as suitable carriers for SDs, as they possess several ideal characteristics. Recently, the use of low-molecular-weight excipients has gained much interest in developing SDs. However, there are limited options available for safe, low molecular excipients, which opens the door again for sugars and polyols. The major points of this review focus on the successes and failures of employing sugars and polyols in the preparation of SDs in the past, recent advances, and potential future applications for the solubility enhancement of poorly water-soluble drugs.
RESUMO
The enervating side effects of chemotherapeutic drugs have necessitated the use of targeted drug delivery in cancer therapy. To that end, thermoresponsive hydrogels have been employed to improve the accumulation and maintenance of drug release at the tumour site. Despite their efficiency, very few thermoresponsive hydrogel-based drugs have undergone clinical trials, and even fewer have received FDA approval for cancer treatment. This review discusses the challenges of designing thermoresponsive hydrogels for cancer treatment and offers suggestions for these challenges as available in the literature. Furthermore, the argument for drug accumulation is challenged by the revelation of structural and functional barriers in tumours that may not support targeted drug release from hydrogels. Other highlights involve the demanding preparation process of thermoresponsive hydrogels, which often involves poor drug loading and difficulties in controlling the lower critical solution temperature and gelation kinetics. Additionally, the shortcomings in the administration process of thermosensitive hydrogels are examined, and special insight into the injectable thermosensitive hydrogels that reached clinical trials for cancer treatment is provided.
RESUMO
Transdermal delivery of active pharmaceutical ingredients (APIs) can be challenging, since the skin possesses a rate-limiting barrier, which may be overcome when APIs possess certain ideal physicochemical properties. The lack thereof would require that APIs be included in drug delivery vehicles to enhance skin permeation. Hence, diclofenac was incorporated into various drug delivery vehicles (i.e., nano-emulsions, nano-emulgels, and a colloidal suspension containing drug-loaded nanoparticles) to investigate the transdermal delivery thereof, while nano-emulsions and nano-emulgels had varying concentrations of evening primrose oil (EPO). The aim of the study was to compare the topical and transdermal diclofenac delivery from the different types of vehicles and to investigate the influence the different EPO concentrations had on diclofenac delivery. After characterization, membrane release studies were performed (to determine whether the API was successfully released from the vehicle) followed by in vitro skin diffusion studies and tape stripping (to establish whether the vehicles assisted the API in reaching the target site (transdermal delivery)). Lastly, cytotoxicity studies were conducted via methyl thiazolyl tetrazolium (MTT) and neutral red (NR) assays on human keratinocyte (HaCaT) cells. Results showed minimal cytotoxic effects at concentrations equivalent to that which had permeated through the skin, while the membrane release and in vitro skin diffusion studies indicated that the nano-emulsions and the 10% EPO vehicles increased API release and diffusion when compared to the other vehicles. However, the colloidal suspension had the highest concentrations of API within the skin. Hence, all the vehicles were non-toxic and effectively delivered diclofenac through the transdermal route.
Assuntos
Diclofenaco , Absorção Cutânea , Humanos , Diclofenaco/química , Administração Cutânea , Pele/metabolismo , Emulsões/química , ExcipientesRESUMO
An effective analytical method is requisite to ensure the accurate identification and quantification of drug(s), either in bulk material or in complex matrices, which form part of finished pharmaceutical products. For the purpose of a pharmaceutical formulation study, it became necessary to have a simple, yet robust and reproducible reversed-phase HPLC method for the simultaneous detection and quantification of lamivudine (3TC), tenofovir disoproxil fumarate (TDF), and dolutegravir sodium (DTG) in bulk form, complex polymeric matrices, and during drug release studies. A suitable method was developed using a Kinetex® C18, 250 × 4.6 mm column as stationary phase and a mobile phase consisting of 50 : 50 v/v methanol and water with 1 mL orthophosphoric acid, with a flow rate of 1.0 mL/min and column temperature maintained at 35°C. A detection wavelength of 260 nm and an injection volume of 10 µL were used. The method was validated according to the International Conference on Harmonization (ICH) guideline Q2 (R1), and the parameters of linearity and range, accuracy, precision, specificity, limit of detection (LOD), limit of quantification (LOQ), robustness, and stability were all determined. Acceptable correlation coefficients for linearity (R2) of >0.998 for each of the three drugs were obtained. The LOD was quantified to be 56.31 µg/mL, 40.27 µg/mL, and 7.00 µg/mL for 3TC, TDF, and DTG, respectively, and the LOQ was quantified as 187.69 µg/mL, 134.22 µg/mL, and 22.5 µg/mL for 3TC, TDF, and DTG, respectively. In relation to all the determined validation parameters, this method proves to be suitable for the accurate identification and quantification of the three ARVs, either alone or in combination, as well as when incorporated into polymeric matrices. Furthermore, the method proves to be suitable to detect degradation of the compounds.
RESUMO
Green rooibos extract (GRE), shown to improve hyperglycemia and HDL/LDL blood cholesterol, has potential as a nutraceutical beverage ingredient. The main bioactive compound of the extract is aspalathin, a C-glucosyl dihydrochalcone. The study aimed to determine the effect of common iced tea ingredients (citric acid, ascorbic acid, and xylitol) on the stability of GRE, microencapsulated with inulin for production of a powdered beverage. The stability of the powder mixtures stored in semi-permeable (5 months) and impermeable (12 months) single-serve packaging at 30 °C and 40 °C/65% relative humidity was assessed. More pronounced clumping and darkening of the powders, in combination with higher first order reaction rate constants for dihydrochalcone degradation, indicated the negative effect of higher storage temperature and an increase in moisture content when stored in the semi-permeable packaging. These changes were further increased by the addition of crystalline ingredients, especially citric acid monohydrate. The sensory profile of the powders (reconstituted to beverage strength iced tea solutions) changed with storage from a predominant green-vegetal aroma to a fruity-sweet aroma, especially when stored at 40 °C/65% RH in the semi-permeable packaging. The change in the sensory profile of the powder mixtures could be attributed to a decrease in volatile compounds such as 2-hexenal, (Z)-2-heptenal, (E)-2-octenal, (E)-2-nonenal, (E,Z)-2,6-nonadienal and (E)-2-decenal associated with "green-like" aromas, rather than an increase in fruity and sweet aroma-impact compounds. Green rooibos extract powders would require storage at temperatures ≤ 30 °C and protection against moisture uptake to be chemically and physically shelf-stable and maintain their sensory profiles.
Assuntos
Aspalathus/química , Bebidas/análise , Chá/química , Compostos Orgânicos Voláteis/químicaRESUMO
The risk of secondary bacterial infections resulting from dental procedures has driven the design of antimicrobial and antifouling dental materials to curb pathogenic microbial growth, biofilm formation and subsequent oral and dental diseases. Studies have investigated approaches based primarily on contact-killing or release-killing materials. These materials are designed for addition into dental resins, adhesives and fillings or as immobilized coatings on tooth surfaces, titanium implants and dental prosthetics. This review discusses the recent developments in the different classes of biomaterials for antimicrobial and antifouling dental applications: polymeric drug-releasing materials, polymeric and metallic nanoparticles, polymeric biocides and antimicrobial peptides. With modifications to improve cytotoxicity and mechanical properties, contact-killing and anti-adhesion materials show potential for incorporation into dental materials for long-term clinical use as opposed to short-lived antimicrobial release-based coatings. However, extended durations of biocompatibility testing, and adjustment of essential biomaterial features to enhance material longevity in the oral cavity require further investigations to confirm suitability and safety of these materials in the clinical setting. The continuous exposure of dental restorative and regenerative materials to pathogenic microbes necessitates the implementation of antimicrobial and antifouling materials to either replace antibiotics or improve its rational use, especially in the day and age of the ever-increasing problem of antimicrobial resistance.
RESUMO
Fractions of an ultrafiltered Cyclopia genistoides extract, respectively enriched in xanthones and benzophenones, were previously shown to inhibit mammalian α-glucosidase in vitro. The present study investigated ex vivo intestinal transport of these fractions, using excised porcine jejunal tissue, to determine whether the gut could be a predominant in vivo site of action. The major bioactive compounds, the xanthones (mangiferin, isomangiferin) and benzophenones (3-ß-D-glucopyranosyliriflophenone, 3-ß-D-glucopyranosyl-4-O-ß-D-glucopyranosyliriflophenone) exhibited poor permeation in the absorptive direction with a relatively high efflux ratio (efflux ratio > 1). The efflux ratio of 3-ß-D-glucopyranosyl-4-O-ß-D-glucopyranosyliriflophenone (3.05) was similar to rhodamine 123 (2.99), a known substrate of intestinal P-glycoprotein 1 efflux transporters. Low epithelial membrane transport rates, coupled with efflux mechanisms, would effectively concentrate these bioactive compounds at the target site (gut lumen). Storage stability testing and moisture sorption assays of the xanthone-enriched fraction, benzophenone-enriched fraction, and ultrafiltered Cyclopia genistoides extract were performed to determine their susceptibility to physical and chemical degradation during storage. Hygroscopicity of the powders, indicated by moisture uptake, decreased in the order: benzophenone-enriched fraction (22.7%) > ultrafiltered Cyclopia genistoides extract (14.0%) > xanthone-enriched fraction (10.7%). 3-ß-D-Glucopyranosylmaclurin, a minor benzophenone, was the least stable of the compounds, degrading faster in the benzophenone-enriched fraction than in ultrafiltered Cyclopia genistoides extract, suggesting that the ultrafiltered extract matrix may provide a degree of protection against chemical degradation. Compound degradation during 12 wk of storage at 40â°C in moisture-impermeable containers was best explained by first order reaction kinetics.
Assuntos
Fabaceae , Xantonas , Animais , Benzofenonas , Holoprosencefalia , Permeabilidade , Extratos Vegetais , SuínosRESUMO
The present work reports two novel pharmaceutical co-crystals; 2:1 isoniazid-glutaric acid (INHGA) and 2:1 pyrazinamide-glutaric acid (PGA). Isoniazid and pyrazinamide are key first-line drugs used for the treatment of tuberculosis. The co-crystals were produced via solid-state and solvent assisted grinding methods. Thermal characteristics of the samples were obtained using the differential scanning calorimetry, hot stage microscopy, and thermogravimetric analyses. The morphology of the powder samples by scanning electron microscopy, structural analysis by Fourier transform infrared spectroscopy and powder X-rays diffraction ensured co-crystal formation. Thermal analyses confirmed the co-crystals with new melting transitions ranging between their respective starting materials. Unique morphologies of the co-crystal particles were clear in SEM micrographs. The formation of intermolecular interactions with the co-crystal former was confirmed by the FT-IR spectral band shifting and was supported by distinct PXRD patterns of co-crystals thereby authenticating the successful co-crystal formation. In vitro solubility evaluation of the synthesized co-crystals by HPLC suggested a remarkable increase in solubility of both INH and PZA in their respective co-crystals.
RESUMO
Nanoparticles (NPs) based on biocompatible and biodegradable polymers such as poly(lactic-co-glycolic acid) (PLGA) and polycaprolactone (PCL) represent effective systems for systemic drug delivery. Upon injection into the blood circuit, the NP surface is rapidly modified due to adsorption of proteins that form a 'protein corona' (PC). The PC plays an important role in cellular targeting, uptake and NP bio-distribution. Hence, the study of interactions between NPs and serum proteins appears as key for biomedical applications and safety of NPs. In the present work, we report on the comparative protein fluorescence quenching extent, thermodynamics of protein binding and identification of proteins in the soft and hard corona layers of PLGA and PCL NPs. NPs were prepared via a single emulsion-solvent evaporation technique and characterized with respect to size, zeta potential, surface morphology and hydrophobicity. Protein fluorescence quenching experiments were performed against human serum albumin. The thermodynamics of serum protein binding onto the NPs was studied using isothermal titration calorimetry. Semi-quantitative analysis of proteins in the PC layers was conducted using gel electrophoresis and mass spectrometry using human serum. Our results demonstrated the influence of particle hydrophobicity on the thermodynamics of protein binding. Human serum proteins bind to a greater extent and with greater affinity to PCL NPs than PLGA NPs. Several proteins were detected in the hard and soft corona of the NPs, representing their unique proteome fingerprints. Some proteins were unique to the PCL NPs. We anticipate that our findings will assist with rational design of polymeric NPs for effective drug delivery applications.
Assuntos
Nanopartículas/química , Poliésteres/química , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Albumina Sérica Humana/química , Termodinâmica , Adsorção , Humanos , Tamanho da Partícula , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/sangue , Propriedades de SuperfícieRESUMO
The physical stability of solid-state forms in which drugs may exist is in some sense an overlooked aspect. In an era where strategies such as amorphous solid dispersions or co-amorphous preparations might provide answers to stumbling blocks such as poor drug solubility and bioavailability, the physical stability of such solid-state preparations should be a priority. Furthermore, the pharmaceutical industry is moving towards adapting a real time release of pharmaceutical products strategy, through the utilization of process analytical technology. It is thus becoming imperative to investigate the various types of phase transformations a specific solid-state form of a drug may undergo. Also, to critically assess the applicability of process analytical tools that may be sensitive enough to monitor not only chemical but also physical drug stability. These combined efforts allow quality to be built into the product, rather than dealing with costly post batch release recalls. Given that drug stability is an essential quality attribute for a drug product and the quality-by-design approach (QbD) is a best solution to build quality in all pharmaceutical products we focussed on the critical material attributes (CMAs), specifically relating to the physical stability of any given drug. This review highlights physical drug stability in relation to CMAs and how this ultimately link to the finished pharmaceutical product. Investigated challenges associated current PAT strategies is also discussed.
Assuntos
Desenho de Fármacos , Estabilidade de Medicamentos , Excipientes/química , Preparações Farmacêuticas/química , Controle de Qualidade , Tecnologia FarmacêuticaRESUMO
Vesicles are widely investigated as carrier systems for active pharmaceutical ingredients (APIs). For topical delivery, they are especially effective since they create a "depot-effect" thereby concentrating the APIs in the skin. Artemisone, clofazimine and decoquinate were selected as a combination therapy for the topical treatment of cutaneous tuberculosis. Delivering APIs into the skin presents various challenges. However, utilising niosomes, liposomes and transferosomes as carrier systems may circumvent these challenges. Vesicles containing 1% of each of the three selected APIs were prepared using the thin-film hydration method. Isothermal calorimetry, differential scanning calorimetry and hot-stage microscopy indicated no to minimal incompatibility between the APIs and the vesicle components. Encapsulation efficiency was higher than 85% for all vesicle dispersions. Vesicle stability decreased and size increased with an increase in API concentration; and ultimately, niosomes were found the least stable of the different vesicle types. Skin diffusion studies were subsequently conducted for 12 h on black human female skin utilising vertical Franz diffusion cells. Transferosomes and niosomes delivered the highest average concentrations of clofazimine and decoquinate into the skin, whereas artemisone was not detected and no APIs were present in the receptor phase. Finally, efficacy against tuberculosis was tested against the Mycobacterium tuberculosis H37Rv laboratory strain. All the dispersions depicted some activity, surprisingly even the blank vesicles portrayed activity. However, the highest percentage inhibition (52%) against TB was obtained with niosomes containing 1% clofazimine.
Assuntos
Artemisininas/administração & dosagem , Clofazimina/administração & dosagem , Decoquinato/administração & dosagem , Sistemas de Liberação de Medicamentos/métodos , Mycobacterium tuberculosis/efeitos dos fármacos , Administração Tópica , Anti-Inflamatórios/administração & dosagem , Anti-Inflamatórios/metabolismo , Artemisininas/metabolismo , Clofazimina/metabolismo , Decoquinato/metabolismo , Combinação de Medicamentos , Feminino , Humanos , Mycobacterium tuberculosis/metabolismo , Técnicas de Cultura de Órgãos , Tamanho da Partícula , Absorção Cutânea/efeitos dos fármacos , Absorção Cutânea/fisiologia , Resultado do TratamentoRESUMO
The bioactive hydrophilic dihydrochalcone, aspalathin, has poor stability and bioavailability hampering its use in functional food ingredients with standardised aspalathin content. The aim of the study was to produce nanoparticles with controlled release to overcome these obstacles. Nanoencapsulation was investigated using both natural (chitosan and lecithin) and synthetic (poly(lactide-co-glycolide) and Eudragit S100® (ES100)) polymers by suitable conventional methods and electrospraying for all polymers. All polymer-method combinations produced particles smaller than 1.1⯵m. Electrospraying produced more favourable results than conventional methods for the synthetic polymers, resulting in spherical particles with higher (pâ¯<â¯0.05) encapsulation efficiencies (>50%) and loading capacities (>10%). Opposite trends were observed for natural polymers. An in vitro release study revealed biphasic aspalathin release profiles at pH 7.4 with ES100 electrosprayed nanoparticles having the slowest (pâ¯<â¯0.05) release rate (1.67â¯h-1). Overall, ES100 electrosprayed nanoparticles showed the most favourable combination of parameters.
Assuntos
Chalconas/análise , Aspalathus/química , Aspalathus/metabolismo , Varredura Diferencial de Calorimetria , Chalconas/química , Quitosana/química , Concentração de Íons de Hidrogênio , Lipossomos/química , Nanopartículas/química , Poliglactina 910/química , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
PURPOSE: The aim of this study was to formulate nano-emulsions comprising natural oils and the active pharmaceutical ingredients (APIs) clofazimine (CLF), artemisone (ATM) and decoquinate (DQ) in order to determine effectiveness of the nano-emulsions for topical delivery of the APIs. The APIs alone do not possess suitable physicochemical properties for topical drug delivery. METHODS: Nano-emulsions were formulated with olive and safflower oils encapsulating the APIs. Skin diffusion and tape stripping studies were performed. By using the lactate dehydrogenase (LDH) assay, in vitro toxicity studies were carried out on immortalized human keratinocytes (HaCaT) cell line to determine cytotoxicities due to the APIs and the nano-emulsions incorporating the APIs. RESULTS: The nano-emulsions were effective in delivering the APIs within the stratum corneum-epidermis and the epidermis-dermis, were non-cytotoxic towards HaCaT cell lines (p < 0.05) and inhibited Mycobacterium tuberculosis in vitro. CONCLUSION: Natural oil nano-emulsions successfully deliver CLF, ATM and DQ and in principle could be used as supplementary topical treatment of cutaneous tuberculosis (CTB). Graphical Abstract á .
Assuntos
Artemisininas/administração & dosagem , Clofazimina/administração & dosagem , Decoquinato/administração & dosagem , Portadores de Fármacos/química , Nanopartículas/química , Azeite de Oliva/química , Administração Tópica , Artemisininas/química , Linhagem Celular , Clofazimina/química , Decoquinato/química , Composição de Medicamentos , Liberação Controlada de Fármacos , Emulsões , HumanosRESUMO
BACKGROUND: The need for a convenience herbal iced tea product with reduced kilojoules merited investigation of the shelf-life of powder mixtures containing a green Cyclopia subternata Vogel (honeybush) extract with proven blood glucose-lowering activity and alternative sweetener mixture. RESULTS: Prior to long-term storage testing, the wettability of powder mixtures containing food ingredients and the compatibility of their components were confirmed using the static sessile drop method and isothermal microcalorimetry, respectively. The powders packed in semi-sealed containers remained stable during storage at 25 °C/60% relative humidity (RH) for 6 months, except for small losses of specific phenolic compounds, namely mangiferin, isomangiferin, 3-ß-d-glucopyranosyliriflophenone, vicenin-2 and 3',5'-di-ß-d-glucopyranosylphloretin, especially when both citric acid and ascorbic acid were present. These acids drastically increased the degradation of phenolic compounds under accelerated storage conditions (40 °C/75% RH). Accelerated storage also caused changes in the appearance of powders and the colour of the reconstituted beverage solutions. Increased moisture content and aw of the powders, as well as moisture released due to dehydration of citric acid monohydrate, contributed to these changes. CONCLUSION: A low-kilojoule honeybush iced tea powder mixture will retain its functional phenolic compounds and physicochemical properties during shelf-life storage at 25 °C for 6 months. © 2017 Society of Chemical Industry.
Assuntos
Bebidas/análise , Cyclopia (Planta)/química , Inulina/química , Fenóis/química , Extratos Vegetais/química , Cápsulas/química , Armazenamento de Alimentos , Umidade , Pós/químicaRESUMO
Recently, considerable interest developed in using newer/improved antibiotics for the treatment of Acne vulgaris. During this study, different roxithromycin solid-state forms (i.e. crystalline and amorphous) were encapsulated into vesicle systems (niosomes, proniosomes, ufosomes and pro-ufosomes) for dermis targeted delivery. Characterization of the vesicles was done with transmission electron microscopy, light microscopy, droplet size, droplet size distribution, pH, zeta-potential and entrapment efficiency percentage. Finally, comparative release and topical diffusion studies were performed, to evaluate if targeted topical delivery was obtained and if the roxithromycin solid-state amorphous forms resulted in improved topical delivery. Vesicle systems containing different roxithromycin (2%) solid-state forms were successfully prepared and characterized. The vesicles showed optimal properties for topical delivery. All carrier systems had topical delivery to the epidermis-dermis, whilst no roxithromycin was found in the receptor compartment or stratum corneum-epidermis. The niosomes were the leading formulation and the two amorphous forms had better topical delivery than the crystalline form. Successful targeted delivery of roxithromycin was obtained in the dermis, where the activity against Propionibacterium acnes is needed. The amorphous forms seemed to have held their solid-state form during formulation and in the vesicles, showing improved topical delivery in comparison to the crystalline form.
Assuntos
Antibacterianos/administração & dosagem , Roxitromicina/administração & dosagem , Administração Tópica , Vesículas Revestidas , Cristalização , Difusão , Portadores de Fármacos , Composição de Medicamentos , Sistemas de Liberação de Medicamentos , Humanos , Técnicas In Vitro , Lipossomos , Testes de Sensibilidade Microbiana , Tamanho da Partícula , Propionibacterium acnes/efeitos dos fármacos , Pele/metabolismoRESUMO
Acne is a common inflammatory skin disease which affects the pilosebaceous units of the skin. It can have severe psychological effects and can leave the patient with severe skin scarring. There are four well-recognized pathological factors responsible for acne which is also the target for acne therapy. In this review, different treatment options are discussed, including topical (i.e., retinoids, and antibiotics) and systemic (i.e., retinoids, antibiotics, and hormonal) treatments. Since the general public has been showing an increasing interest in more natural and generally safer treatment options, the use of complementary and alternative medicines (CAM) for treating acne was also discussed. The use of physical therapies such as comedone extraction, cryoslush therapy, cryotherapy, electrocauterization, intralesional corticosteroids and optical treatments are also mentioned. Acne has been extensively researched with regards to the disease mechanism as well as treatment options. However, due to the increasing resistance of Propionibacterium acnes towards the available antibiotics, there is a need for new treatment methods. Additionally, the lack of necessary evidence on the efficacy of CAM therapies makes it necessary for researchers to investigate these treatment options further.
Assuntos
Acne Vulgar/terapia , Acne Vulgar/diagnóstico , Acne Vulgar/etiologia , Acne Vulgar/metabolismo , Terapia Combinada , Humanos , Resultado do TratamentoRESUMO
Currently, macromolecular drugs such as proteins are mainly administered by means of injections due to their low intestinal epithelial permeability and poor stability in the gastrointestinal tract. This study investigated binary combinations of chemical drug absorption enhancers to determine if synergistic drug absorption enhancement effects exist. Aloe vera, Aloe ferox and Aloe marlothii leaf gel materials, as well as with N-trimethyl chitosan chloride (TMC), were combined in different ratios and their effects on the transepithelial electrical resistance (TEER), as well as the transport of FITC-dextran across Caco-2 cell monolayers, were measured. The isobole method was applied to determine the type of interaction that exists between the absorption enhancers combinations. The TEER results showed synergism existed for the combinations between A. vera and A. marlothii, A. marlothii and A. ferox as well as A. vera and TMC. Antagonism interactions also occurred and can probably be explained by chemical reactions between the chemical permeation enhancers, such as complex formation. In terms of FITC-dextran transport, synergism was found for combinations between A. vera and A. marlothii, A. marlothii and A. ferox, A. vera and TMC, A. ferox and TMC and A. marlothii and TMC, whereas antagonism was observed for A. vera and A. ferox. The combinations where synergism was obtained have the potential to be used as effective drug absorption enhancers at lower concentrations compared to the single components.
Assuntos
Quitosana/metabolismo , Dextranos/metabolismo , Sinergismo Farmacológico , Fluoresceína-5-Isotiocianato/análogos & derivados , Absorção Intestinal/efeitos dos fármacos , Extratos Vegetais/metabolismo , Aloe/química , Transporte Biológico/efeitos dos fármacos , Células CACO-2 , Linhagem Celular Tumoral , Quitosana/administração & dosagem , Portadores de Fármacos/química , Portadores de Fármacos/metabolismo , Impedância Elétrica , Fluoresceína-5-Isotiocianato/metabolismo , Humanos , Permeabilidade , Extratos Vegetais/administração & dosagem , Folhas de Planta/químicaRESUMO
Poor aqueous solubility of drugs and the improvement thereof has always been a challenge for the pharmaceutical industry. With this, one of the focuses of the pharmaceutical research scientist involves investigating possible metastable forms of a given drug to be incorporated into solid dosage forms. The rationale being, the improved solubility offered by the metastable solid-state forms of drugs. Solubility remains a major challenge for formulation scientists, especially with antimicrobial agents where the emergence of resistance is directly dependent on the concentration and duration of the parasite exposed to the drug. Sulfadoxine-pyrimethamine combination therapies are still the recommended treatments for uncomplicated Plasmodium falciparum malaria. The aim of this study was to prepare an amorphous form of sulfadoxine and to investigate the stability and recrystallization behavior thereof. The amorphous form was prepared by the well-known quench cooling of the melt. The physico-chemical properties and stability of amorphous sulfadoxine were studied using hot-stage microscopy (HSM), scanning electron microscopy (SEM), x-ray powder diffractometry (XRPD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), as well as microcalorimetry. The recrystallization kinetics were studied isothermally by applying the Johnson-Mehl-Avrami model and non-isothermally by applying the Kissinger model. The physical stabilization of the amorphous form was investigated using physical mixtures of amorphous sulfadoxine with polyvinylpyrrolidone-25 (PVP-25). It was proved that sulfadoxine is a good glass former with relative high physical stability; however, water acts as a strong plasticizer for amorphous sulfadoxine, detrimentally affecting the stability during exposure to high moisture conditions.