Pyrolysis-gas chromatography-isotope ratio mass spectrometry for monitoring natural additives in polylactic acid active food packages.

Compound-specific isotope analysis (CSIA) usually requires preparative steps (pretreatments, extraction, derivatization) to get amenable chromatographic analytes from bulk geological, biological or synthetic materials. Analytical pyrolysis (Py-GC/MS) can help to overcome such sample manipulation. This communication describe the results obtained by hyphenating analytical pyrolysis (Py-GC) with carbon isotope-ratio mass spectrometry (IRMS) for the analysis of a polylactic acid (PLA) a based bio-plastic extruded with variable quantities of a natural plant extract or oregano essential oil. The chemical structural information of pyrolysates was first determined by conventional analytical pyrolysis and the measure of δ13C in specific compounds was done by coupling a pyrolysis unit to a gas chromatograph connected to a continuous flow IRMS unit (Py-GC-C-IRMS). Using this Py-CSIA device it was possible to trace natural additives with depleted δ13C values produced by C3 photosystem vegetation (cymene: -26.7‰±2.52; terpinene: -27.1‰±0.13 and carvacrol: -27.5‰±1.80 from oregano and two unknown structures: -23.3‰±3.32 and -24.4‰±1.70 and butyl valerate: -24.1‰±3.55 from Allium spp.), within the naturally isotopically enriched bio-plastic backbone derived from corn (C4 vegetation) starch (cyclopentanones: -14.2‰±2.11; lactide enantiomers: -9.2‰±1.56 and larger polymeric units: -17.2‰±1.71). This is the first application of Py-CSIA to characterize a bio-plastic and is shown as a promising tool to study such materials, providing not only a fingerprinting, but also valuable information about the origin of the materials, allowing the traceability of additives and minimizing sample preparation.

Development of PLA films containing oregano essential oil (Origanum vulgare L. virens) intended for use in food packaging.

Consumers' concerns about the environment and health have led to the development of new food packaging materials avoiding petroleum-based matrices and synthetic additives. The present study has developed polylactic acid (PLA) films containing different concentrations of essential oil from Origanum vulgare L. virens (OEO). The effectiveness of this new active packaging was checked for use in ready-to-eat salads. A plasticising effect was observed when OEO was incorporated in PLA films. The rest of the mechanical and physical properties of developed films did not show much change when OEO was included in the film. An antioxidant effect was recorded only for films containing the highest percentages of the active agent (5% and 10%). In addition, films exhibited in vitro antibacterial activity against Staphylococcus aureus, Yersinia enterocolitica, Listeria monocytogenes, Enterococcus faecalis and Staphylococcus carnosus. Moreover, in ready-to-eat salads, antimicrobial activity was only observed against yeast and moulds, where 5% and 10% of OEO was the most effective.

Use of nanoclay platelets in food packaging materials: technical and cytotoxicity approach.

Two organo-modified clays for food contact applications were developed to produce hydrophobically modified montmorillonite and hence to obtain better compatibility between the biopolymer and the filler (nanoclay). These nanofillers were characterised by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction and thermogravimetric analysis (TGA) in order to study their composition, structure and thermal stability. The fillers were used to reinforce polylactic acid (PLA) bottles, which were characterised using different techniques such as mechanical and barrier properties, morphology and thermal stability. The results were compared with conventional PLA bottles. The use of the modified clay in PLA bottles was found to lead to an improvement in mechanical and barrier properties. Finally, cytotoxicity tests were carried out with the organo-modified clays using Caco-2 and HepG2 cell lines, with uptake of neutral red as a basal cytotoxicity biomarker.

Modelling of migration from multi-layers and functional barriers: estimation of parameters.

Functional barriers form parts of multi-layer packaging materials, which are deemed to protect the food from migration of a broad range of contaminants, e.g. those associated with reused packaging. Often, neither the presence nor the identity of the contaminants is known, so that safety assessment of the materials has to rely on predictive tools. Several complementary freeware described here allow one to model diffusion in multi-layer films. These tools require the input of parameters that are not easy to determine or predict. Previous work has focused on the prediction of diffusion coefficients at storage temperatures of packaging in contact with food. However, many other kinetic and thermodynamic parameters are needed to describe transport properties during the processing of a material at high temperature and during its shelf-life. All parameters needed for the calculations are discussed. In order to propose default values, the approach consists of (1) reviewing the available literature data, (2) running experiments on polypropylene, polyethylene and poly(ethylene vinyl alcohol) in typical conditions (separately diffusion during processing and migration) and (3) simulating numerical sets for typical situations. Several freeware are proposed to simulate migration from multi-layers and functional barriers using the default parameters.

Functional barriers: properties and evaluation.

Functional barriers are multilayer structures deemed to prevent migration of some chemicals released by food-contact materials into food. In the area of plastics packaging, different migration behaviours of mono- and multilayer structures are assessed in terms of lag time and of their influence of the solubility of the migrants in food simulants. Whereas barriers to oxygen or to aromas must prevent the diffusion of these compounds under conditions of use, a functional barrier must also be efficient under processing conditions, to prevent diffusion of substances when the polymer layers are in contact at high (processing) temperatures. Diffusion in melted polymers at high temperatures is much slower for glassy polymers, than in polymers that are rubbery at ambient temperature. To evaluate the behaviour of functional barriers under conditions of use, a set of reference diffusion coefficients in the 40-60 degrees C range were determined for 14 polymers. Conditions for accelerated migration tests are proposed based on worst-case activation energy in the 40-60 degrees C range. For simulation of migration, numerical models are available. The rules derived from the models can be used both by industry (to optimize a material in terms of migration) or by risk assessors. Differences in migration behaviour between mono- and multilayer materials are discussed.