Prevalence of BRCA1 and BRCA2 germline variants in an unselected pancreatic cancer patient cohort in Pakistan.

BACKGROUND: BRCA1 and BRCA2 (BRCA1/2) are the most frequently investigated genes among Caucasian pancreatic cancer patients, whereas limited reports are available among Asians. We aimed to investigate the prevalence of BRCA1/2 germline variants in Pakistani pancreatic cancer patients. METHODS: One hundred and fifty unselected and prospectively enrolled pancreatic cancer patients were comprehensively screened for BRCA1/2 germline variants using denaturing high-performance liquid chromatography and high-resolution melting analyses, followed by DNA sequencing of the variant fragments. The novel variants were analyzed for their pathogenic effect using in-silico tools. Potentially functional variants were further screened in 200 cancer-free controls. RESULTS: Protein truncating variant was detected in BRCA2 only, with a prevalence of 0.7% (1/150). A frameshift BRCA2 variant (p.Asp946Ilefs*14) was identified in a 71-year-old male patient of Pathan ethnicity, with a family history of abdominal cancer. Additionally, we found a novel variant in BRCA2 (p.Glu2650Gln), two previously reported variants in BRCA1 (p.Thr293Ser) and BRCA2 (p.Ile2296Leu) and a recurrent nonsense variant in BRCA2 (p.Lys3326Ter). These variants were classified as variants of uncertain significance (VUS). It is noteworthy that none of these VUS carriers had a family history of pancreatic or other cancers. CONCLUSIONS: In this first study, BRCA1/2 pathogenic variant is identified with a low frequency in pancreatic cancer patients from Pakistan. Comprehensive multigene panel testing is recommended in the Pakistani pancreatic cancer patients to enhance genetic understanding in this population.

Contribution of constitutional BRCA1 promoter methylation to early-onset and familial breast cancer patients from Pakistan.

PURPOSE: Constitutional BRCA1 promoter methylation has been identified as a potential risk factor for breast cancer (BC) in the Caucasian population. However, this data is lacking for BC patients of Asian origin. Therefore, we assessed the contribution of constitutional BRCA1 promoter methylation in Pakistani BC patients. METHODS: A total of 385 BRCA1/2-negative index BC patients (197 early-onset BC (≤ 30 years), 152 familial BC, 17 familial BC and ovarian cancer, 19 male BC) and 107 healthy controls were screened for the constitutional BRCA1 promoter methylation by methylation-sensitive high-resolution melting assay. Overall, 131 patients displayed triple-negative BC (TNBC) and 254 non-TNBC phenotypes. The prevalence of BRCA1 promoter methylation was calculated based on clinicopathological characteristics using univariable and multivariable logistic regression models. RESULTS: Constitutional BRCA1 promoter methylation was identified in 19.5% (75/385) of BC patients and 13.1% (14/107) of controls. The frequency of methylation was higher in early-onset BC (23.4% vs. 13.1%, P = 0.035) and TNBC patients (29.0% vs. 13.1%, P = 0.004) compared to controls. Methylation was also more prevalent in patients with high-grade than low-grade tumors (21.7% vs. 12.2%, P = 0.034) and progesterone receptor (PR)-negative than PR-positive tumors (26.0% vs. 13.9%, P = 0.004). Constitutional BRCA1 promoter methylation remained independently associated with TNBC phenotype (odds ratio 1.99; 95% CI 1.12-3.54; P = 0.02) after adjusting for BC diagnosis age, tumor grade, ER, and PR status. CONCLUSION: Constitutional BRCA1 promoter methylation is associated with TNBC and can serve as a non-invasive blood-based biomarker for Pakistani TNBC patients.

Genetic analysis of ACE2 peptidase domain in SARS-CoV-2-positive and SARS-CoV-2-negative individuals from Pakistan.

BACKGROUND: The outbreak of coronavirus disease 2019 (COVID-19) has emerged as a serious public health emergency of global concern. Angiotensin converting enzyme 2 (ACE2) peptidase domain is important for the cellular entry of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Germline variants in ACE2 peptidase domain may influence the susceptibility for SARS-CoV-2 infection and disease severity in the host population. ACE2 genetic analysis among Caucasians showed inconclusive results. This is the first Asian study investigating the contribution of ACE2 germline variants to SARS-CoV-2 infection in Pakistani population. METHODS: In total, 442 individuals, including SARS-CoV-2-positive (n = 225) and SARS-CoV-2-negative (n = 217) were screened for germline variants in ACE2 peptidase domain (exons 2, 3, 9, and 10) using high resolution melting and denaturing high-performance liquid chromatography analyses followed by DNA sequencing of variant fragments. The identified variant was analyzed by in silico tools for potential effect on ACE2 protein. RESULTS: A missense variant, p.Lys26Arg, was identified in one SARS-CoV-2-positive (1/225; 0.4%) and three SARS-CoV-2-negative (3/217; 1.4%) individuals. No significant difference in the minor allele frequency of this variant was found among SARS-CoV-2-positive and SARS-CoV-2-negative individuals (1/313; 0.3% versus 3/328; 0.9%; P = 0.624), respectively. The SARS-CoV-2-positive patient carrying p.Lys26Arg showed mild COVID-19 disease symptoms. It was predicted as benign variant by in silico tool. No variant was detected in ACE2 residues important for binding of SARS-CoV-2 spike protein. CONCLUSION: The p.Lys26Arg variant may have no association with SARS-CoV-2 susceptibility in Pakistani population. Whole ACE2 gene screening is warranted to clarify its role in SARS-CoV-2 infection.

Harnessing Hierarchical Nano- and Micro-Fabrication Technologies for Musculoskeletal Tissue Engineering.

Cells within a tissue are able to perceive, interpret and respond to the biophysical, biomechanical, and biochemical properties of the 3D extracellular matrix environment in which they reside. Such stimuli regulate cell adhesion, metabolic state, proliferation, migration, fate and lineage commitment, and ultimately, tissue morphogenesis and function. Current scaffold fabrication strategies in musculoskeletal tissue engineering seek to mimic the sophistication and comprehensiveness of nature to develop hierarchically assembled 3D implantable devices of different geometric dimensions (nano- to macrometric scales) that will offer control over cellular functions and ultimately achieve functional regeneration. Herein, advances and shortfalls of bottom-up (self-assembly, freeze-drying, rapid prototype, electrospinning) and top-down (imprinting) scaffold fabrication approaches, specific to musculoskeletal tissue engineering, are discussed and critically assessed.

Substrate topography: A valuable in vitro tool, but a clinical red herring for in vivo tenogenesis.

Controlling the cell-substrate interactions at the bio-interface is becoming an inherent element in the design of implantable devices. Modulation of cellular adhesion in vitro, through topographical cues, is a well-documented process that offers control over subsequent cellular functions. However, it is still unclear whether surface topography can be translated into a clinically functional response in vivo at the tissue/device interface. Herein, we demonstrated that anisotropic substrates with a groove depth of ∼317nm and ∼1988nm promoted human tenocyte alignment parallel to the underlying topography in vitro. However, the rigid poly(lactic-co-glycolic acid) substrates used in this study upregulated the expression of chondrogenic and osteogenic genes, indicating possible tenocyte trans-differentiation. Of significant importance is that none of the topographies assessed (∼37nm, ∼317nm and ∼1988nm groove depth) induced extracellular matrix orientation parallel to the substrate orientation in a rat patellar tendon model. These data indicate that two-dimensional imprinting technologies are useful tools for in vitro cell phenotype maintenance, rather than for organised neotissue formation in vivo, should multifactorial approaches that consider both surface topography and substrate rigidity be established. STATEMENT OF SIGNIFICANCE: Herein, we ventured to assess the influence of parallel groves, ranging from nano- to micro-level, on tenocytes response in vitro and on host response using a tendon and a subcutaneous model. In vitro analysis indicates that anisotropically ordered micro-scale grooves, as opposed to nano-scale grooves, maintain physiological cell morphology. The rather rigid PLGA substrates appeared to induce trans-differentiation towards chondrogenic and/or steogenic lineage, as evidence by TILDA gene analysis. In vivo data in both tendon and subcutaneous models indicate that none of the substrates induced bidirectional host cell and tissue growth. Collective, these observations indicate that two-dimensional imprinting technologies are useful tools for in vitro cell phenotype maintenance, rather than for directional neotissue formation, should multifactorial approaches that consider both surface topography and substrate rigidity be established.

The influence of anisotropic nano- to micro-topography on in vitro and in vivo osteogenesis.

AIM: Topographically modified substrates are increasingly used in tissue engineering to enhance biomimicry. The overarching hypothesis is that topographical cues will control cellular response at the cell-substrate interface. MATERIALS & METHODS: The influence of anisotropically ordered poly(lactic-co-glycolic acid) substrates (constant groove width of ~1860 nm; constant line width of ~2220 nm; variable groove depth of ~35, 306 and 2046 nm) on in vitro and in vivo osteogenesis were assessed. RESULTS & DISCUSSION: We demonstrate that substrates with groove depths of approximately 306 and 2046 nm promote osteoblast alignment parallel to underlined topography in vitro. However, none of the topographies assessed promoted directional osteogenesis in vivo. CONCLUSION: 2D imprinting technologies are useful tools for in vitro cell phenotype maintenance.

Data on in vitro and in vivo cell orientation on substrates with different topographies.

This data article contains data related to the research article entitled "Substrate topography: A valuable in vitro tool, but a clinical red herring for in vivo tenogenesis" [1]. We report measurements on tenocyte viability, metabolic activity and proliferation on substrates with different topographies. We also report the effect of substrates with different topographies on host cells in a subcutaneous model.

Engineering in vitro microenvironments for cell based therapies and drug discovery.

Traditional ex vivo culture setups fail to imitate the native tissue niche, leading to cellular senescence, phenotypic drift, growth arrest and loss of stem cell multipotency. Growing evidence suggests that surface topography, substrate stiffness, mechanical stimulation, oxygen tension and localised density influence cellular functions and longevity, enhance tissue-specific extracellular matrix deposition and direct stem cell differentiation. In this review, we discuss how these cues will facilitate engineering of physiological in vitro microenvironments to enable clinical translation of cell based therapies and development of in vitro models for drug discovery applications.