Inflammatory tissue response in human soft tissue is caused by a higher particle load near carbon fiber-reinforced PEEK compared to titanium plates.

Titanium as the leading implant material in locked plating is challenged by polymers such as carbon fiber-reinforced polyetheretherketone (CFR-PEEK), which became the focus of interest of researchers and manufacturers in recent years. However, data on human tissue response to these new implant materials are rare. Osteosynthesis plates and peri­implant soft tissue samples of 16 healed proximal humerus fractures were examined (n = 8 CFR-PEEK, n = 8 titanium). Soft tissue was analyzed by immunohistochemistry and µCT. The entrapped foreign bodies were further examined for their material composition by FTIR. To gain insight into their origin and formation mechanism, explanted and new plates were evaluated by SEM, EDX, profilometry and HR-CT. In the peri­implant soft tissue of the CFR-PEEK plates, an inflammatory tissue reaction was detected. Tissues contained foreign bodies, which could be identified as tantalum wires, carbon fiber fragments and PEEK particles. Titanium particles were also found in the peri­implant soft tissue of the titanium plates but showed a less intense surrounding tissue inflammation in immunohistochemistry. The surface of explanted CFR-PEEK plates was rougher and showed exposed and broken carbon fibers as well as protruding and deformed tantalum wires, especially in used screw holes, whereas scratches were identified on the titanium plate surfaces. Particles were present in the peri­implant soft tissue neighboring both implant materials and could be clearly assigned to the plate material. Particles from both plate materials caused detectable tissue inflammation, with more inflammatory cells found in soft tissue over CFR-PEEK plates than over titanium plates. STATEMENT OF SIGNIFICANCE: Osteosynthesis plates are ubiquitously used in various medical specialties for the reconstruction of bone fractures and defects and are therefore indispensable for trauma surgeons, ENT specialists and many others. The leading implant material are metals such as titanium, but recently implants made of polymers such as carbon fiber-reinforced polyetheretherketone (CFR-PEEK) have become increasingly popular. However, little is known about human tissue reaction and particle generation related to these new implant types. To clarify this question, 16 osteosynthesis plates (n = 8 titanium and n = 8 CFR-PEEK) and the overlying soft tissue were analyzed regarding particle occurrence and tissue inflammation. Tissue inflammation is clinically relevant for the development of scar tissue, which is discussed to cause movement restrictions and thus contributes significantly to patient outcome.

Open reduction and internal fixation of displaced head-split type humeral fractures and role of the rotator-interval approach.

Background: Open reduction and internal fixation (ORIF) of humeral head split fractures is challenging because of high instability and limited visibility. The aim of this retrospective study was to investigate the extend of the approach through the rotator interval (RI) on the reduction quality and functional outcome. Methods: 37 patients (mean age: 59 ± 16 years,16 female) treated by ORIF through a standard deltopectoral (DP) approach were evaluated. The follow-up period was at least two years. In 17 cases, the approach was extended through the RI. Evaluation was based on radiographs, Constant scores (CS) and DASH scores. Results: In group DP, "anatomic" reduction was achieved in 9 cases (45%), "acceptable" in 5 cases (25%), and "malreduced" in 6 cases (30%). In group RI, "anatomic" reduction was seen in 12 cases (71%), "acceptable" in 5 cases (29%), and "malreduced" in none (p = 0.04). In the DP group, the CS was 60.2 ± 16.2 and the %CS was 63.9 ± 22.3, while in the RI group, the CS was 74.5 ± 17.4 and the %CS was 79.1 ± 24.1 (p = 0.07, p = 0.08). DASH score was 22.8 ± 19.5 in DP compared to RI: 25.2 ± 20.6 (p = 0.53). Conclusions: The RI approach improves visualization as it enhances quality of fracture reduction, however functional outcomes may not differ significantly. Type of study and level of proof: Retrospective, level III.

Immediate weight bearing without immobilization for operatively treated ankle fractures is safe - A systematic review.

BACKGROUND: This systematic literature review compared weight bearing (WB) vs. partial- / non-weight bearing (NWB) and mobilization (MB) vs. immobilization (IMB) for surgically treated ankle fractures. METHODS: Five databases were searched. Eligible were (quasi-)randomized controlled trials comparing at least two different postoperative treatment protocols. The risk of bias was assessed using the RoB-2 toolkit. The primary outcome was complication rate, secondary outcome Olerud and Molander Ankle Score (OMAS), range of motion (ROM), and return to work (RTW). RESULTS: Out of 10,345 studies, 24 papers were eligible. Thirteen studies (n = 853) compared WB/NWB, 13 studies (n = 706) MB/IMB with a moderate study quality. WB did not increase the risk for complications but resulted in superior short-term outcomes for OMAS, ROM, RTW. 12 studies found no inferior results for MB compared to IMB. CONCLUSION: Early and immediate WB and MB do not increase the complication rates but result in superior short term outcome scores. LEVEL OF EVIDENCE: Level I Systematic Review.

Pain levels during distraction osteogenesis with lengthening nails in 168 cases.

PURPOSE: To firstly examine the pain levels during distraction osteogenesis (DO) with lengthening nails (LN) in a large sample. METHODS: A total of 168 cases underwent DO of the tibia or femur with five different models of LN. Under a standardized medical regime, daily pain levels were noted as nominal rating scale (NRS) score (0-10) during the distraction phase. NRS scores and several potential influence factors (LN model, bone, approach, side, age, gender) were evaluated. RESULTS: The mean distraction length was 39.1 ± 14.4 mm. The average NRS score decreased from postoperative day 1 with 2.84 nonlinearly by 1.03 points (36.3%) over the course of 62 days to an average score of 1.81. The mean decrease during the first thirty days was 0.67(23.6%). Subgroup analysis did not reveal any influence factors. CONCLUSION: Pain levels during the distraction phase are overall low, continuously decreasing, and well manageable with mostly non-opioid analgesics.

Safe drilling zones for anteriorly, central, and posteriorly angulated syndesmotic stabilization devices.

PURPOSE: The purposes of the study were to (1) analyze the shape of the distal fibula at the location of syndesmotic stabilization and to (2) define safe zones at the distal-lateral fibula for three different drilling tunnel orientations: anteriorly-, posteriorly angulated and center-center. METHODS: Postoperative, bilateral CT images of adult patients that underwent syndesmotic stabilization (suture-button system) for an acute, unilateral ankle injury were analyzed. Manual axial CT reconstructions of the uninjured side were generated. First, the axial shape of the distal fibula was classified. The aspect ratio between the anterio-lateral and the posterior-lateral surfaces of the fibula was calculated to assess symmetry. Second, the same axial planes were used to define the safe zones. Each drilling-tunnel orientation (anterior, central, posterior) comprised a fixed medial tibial anchor point and a safe zone on the lateral fibula. For each of the three orientations, the most anteriorly and posteriorly drilling tunnel location was simulated. Next to a cumulative visual analysis, a quantitative analysis of the most anterior and posterior point on the anterio- and posterior-lateral surfaces was calculated. RESULTS: A total of 96 CT datasets were analyzed. (1) 81% of fibulae revealed a triangular convex-, 10% an irregular-, and 8% a quadrilateral shape. The lateral surface ratio was 1.0 ± 0.2 (range: 0.7-1.5), not differing between the fibula types (n.s.). (2) The safe corridor on the lateral surface of the fibula for an anteriorly angulated drilling tunnel was - 8% to - 41%, for a posteriorly angulated drilling tunnel was 0% to 46%, and for a center-center alignment - 7 ± 11% (range: - 28 to 18%). CONCLUSION: The meta-diaphyseal region of the distal fibula revealed a homogeneous crosssectional shape. The lateral apex of the fibula can serve as a landmark defining safe zones to place the drilling tunnels correctly. Applying these safe zones in clinical practice could help to avoid the misplacement of the syndesmotic fixation device. LEVEL OF EVIDENCE: Level III, retrospective radiographic study.

Pedobarographic evaluation of five commonly used orthoses for the lower extremity.

INTRODUCTION: Orthoses are designed to achieve immobilization or off-loading of certain regions of the foot. Yet, their off-loading capacity for the specific regions has not yet been studied. Therefore, the aim of this study was to analyze the plantar pressure distribution of five commonly applied orthoses for foot and ankle in a healthy population. MATERIALS AND METHODS: Five orthoses (postoperative shoe, forefoot relief shoe, short walker boot, high walker boot, and calcaneus fracture orthosis) were compared pedobarographically using insoles on a treadmill to a ready-made running shoe in eleven healthy subjects (median age 29 years). Peak pressure, maximum force, force-time integral, contact time, and contact area were evaluated separately for the forefoot, midfoot, and hindfoot. RESULTS: The forefoot relief shoe, the short- and high walker boot significantly reduced the peak pressure at the forefoot with no significant differences between these orthoses. None of the five orthoses off-loaded the midfoot, but the calcaneus fracture orthosis and the short walker boot instead increased midfoot load. For the hindfoot, the calcaneus fracture orthosis was the only device to significantly reduce the peak pressure. CONCLUSIONS: This is the first study to investigate the specific off-loading capacities of different orthoses for specific foot regions in a healthy collective. The knowledge of absolute and relative load shifts for the different orthoses is of fundamental interest for targeted clinical decision-making of physicians.

A systematic review and meta-analysis on the value of the external rotation stress test under fluoroscopy to detect syndesmotic injuries.

Purpose: The aim was to conduct a systematic literature review and meta-anaylsis to analyze the diagnostic accuracy of the external rotation stress test (ERST) for syndesmotic injuries. Methods: The systematic review was conducted according to the PRISMA-P guidelines (Prospero ID: CRD42021282457). Four common databases were searched from inception to September 29, 2021. Eligible were any studies facilitating the ERST under fluoroscopy in a defined state of syndesmotic instability. Syndesmotic ligament-specific rupture must have been proven by MRI, arthroscopy, or controlled dissection (cadaver study). Two reviewers independently conducted each step of the systematic literature review. The risk of bias was assessed by the Quality Appraisal for Cadaveric Studies Score scale. The data analysis was performed qualitatively and quantitatively. Results: Eight studies were eligible for a qualitative analysis, and six studies were eligible for a quantitative analysis. All studies included were cadaver studies. The qualitative analysis comprised 94 specimens and revealed considerable heterogeneity. Six studies allowed for a quantitative analysis of the tibiofibular clear space (TFCS) and five studies for the medial clear space (MCS) during the ERST. The quantitative analysis of the TFCS revealed no significant differences between intact and any stage of syndesmotic injury. The MCS was able to differentiate between intact and 2-ligament- (Z = 2.04, P = 0.02), 3-ligament- (Z = 3.2, P = 0.001), and 3-ligament + deltoid ruptures (Z = 3.35, P < 0.001). Conclusion: The ERST is the only noninvasive test to assess syndesmotic instability and can be conducted bilaterally. The uninjured contralateral side can serve as a baseline reference. Based on the conducted quantitative analysis, the MCS seems to be able to differentiate between stable (intact/1-ligament) and unstable (2-ligament/3-ligament) lesions.

[Transverse distraction osteogenesis : New chances for limb salvage?] / Transverse Kallusdistraktion : Neue Chancen für den Extremitätenerhalt?

Distraction osteogenesis (DO) is a technique that can be successfully used to treat leg length discrepancies and to reconstruct long defects of bone. By gradual distraction of the bone fragments by approximately 1 mm per day, hypervascularization and an increased bone healing potential (growth stimulus) occur. So far, DO has almost exclusively been used longitudinally to generate new biologically active bone. Chronic wounds, ulcers and osteitis, especially in the region of the foot, are always a challenge for the treating surgeon, since treatment is tedious, the outcome uncertain and associated with possible loss of the extremity. Transverse distraction osteogenesis (tDO) now uses the growth stimulus of the DO translationally to treat distally located, chronic wounds and thus leads to accelerated wound healing. At the end of the 5­week treatment, the transversely distracted fragment, located far proximal to the chronic wound, is back in its original location. The biological stimulus has a long-lasting effect, longer than the tDO itself. Further investigations into the mechanisms of action and treatment outcomes of tDO are required. If the previous results are confirmed, tDO may become a game changer and enable the limb salvage for a large proportion of findings that previously required amputation.

Novel approach to estimate distraction forces in distraction osteogenesis and application in the human lower leg.

PURPOSE: In distraction osteogenesis (DO) of long bones, new bone tissue is distracted to lengthen limbs or reconstruct bone defects. However, mechanical boundary conditions in human application such as arising forces are mainly based on limited empirical data. Our aim was the numerical determination of the callus distraction force (CDF) and the total distraction force (TDF) during DO in the tibia of adults to advance the understanding of callus tissue behavior and optimize DO procedures. METHOD: We implemented a mathematical model based on an animal experiment to enable the calculation of forces arising while distracting callus tissue, excluding the influence of surrounding soft tissue (muscles, skin etc.). The CDF progression for the distraction period was calculated using the implemented model and varying distraction parameters (initial gap, area, step size, time interval, length). Further, we estimated the CDF based on reported forces in humans and compared the results to our model predictions. In addition, we calculated the TDF based on our CDF predictions in combination with reported resisting forces due to soft tissue presence in human cadavers. Finally, we compared the progressions to in vivo TDF measurements for validation. RESULTS: Due to relaxation, a peak and resting CDF is observable for each distraction step. Our biomechanical results show a non-linear degressive increase of the resting and peak CDF at the beginning and a steady non-linear increase thereafter. The calculated resting and peak CDF in the tibial metaphysis ranged from 0.00075 to 0.0089 N and 0.22-2.6 N at the beginning as well as 20-25 N and 70-75 N at the end of distraction. The comparison to in vivo data showed the plausibility of our predictions and resulted in a 10-33% and 10-23% share of resting CDF in the total resting force for bone transport and elongation, respectively. Further, the percentage of peak CDF in total peak force was found to be 29-58% and 27-55% for bone transport and elongation, respectively. Moreover, our TDF predictions were valid based on the comparison to in vivo forces and resulted in a degressive increase from 6 to 125 N for the peak TDF and from 5 to 76 N for the resting TDF. CONCLUSION: Our approach enables the estimation of forces arising due to the distraction of callus tissue in humans and results in plausible force progressions as well as absolute force values for the callus distraction force during DO. In combination with measurements of resisting forces due to the presence of soft tissue, the total distraction force in DO may also be evaluated. We thus propose the application of this method to approximate the behavior of mechanical callus properties during DO in humans as an alternative to in vivo measurements.

Functional outcomes before and after implant removal in patients with posttraumatic shoulder stiffness and healed proximal humerus fractures: does implant material (PEEK vs. titanium) have an impact? - a pilot study.

BACKGROUND: Posttraumatic shoulder stiffness remains a problem after proximal humerus fracture (PHF) despite good healing rates. The aim of this pilot study was to determine whether the implant material and overlying soft tissue have an effect on shoulder range of motion (ROM) before and after implant removal (IR). METHODS: 16 patients (mean age 55.2 ± 15.3 (SD) years; 62.5% female) were included who underwent operative treatment with locking plates of either carbon fiber reinforced Polyetheretherketone (PEEK) (PEEKPower® humeral fracture plate, Arthrex, Naples, Florida, USA, n = 8) or titanium alloy (Ti) (Philos®, DePuy Synthes, Johnson & Johnson Medical, Raynham, Massachusetts, USA, n = 8) for PHF. All patients presented with a limited ROM and persistent pain in everyday life after the fracture had healed, whereupon IR was indicated. ROM before and after IR were compared as well as the Constant Score (CS) and the CS compared to the contralateral shoulder (%CS) 1 year after IR. RESULTS: In group PEEK, elevation was 116.3° ± 19.2° pre- and 129.4° ± 23.7° post-IR (p = 0.027). External rotation was 35.0° ± 7.6° pre- and 50.6° ± 21.8° post-IR (p = 0.041). External rotation with the humerus abducted 90° was 38.8° ± 18.1° pre- and 52.5° ± 25.5° post-IR (p = 0.024). In group Ti, elevation was 110.0° ± 34.6° pre- and 133.8° ± 31.1° post-IR (p = 0.011). External rotation with the humerus at rest was 33.8° ± 23.1° pre- and 48.8° ± 18.7° post-IR (p = 0.048). External rotation with the humerus abducted 90° was 40.0° ± 31.6° pre- and 52.5° ± 22.5° post-IR (p = 0.011). Comparison of the two implant materials showed no significant difference. The overall CS was 90.3 ± 8.8, the %CS was 91.8% ± 14.7%. CONCLUSION: There was no significant difference in ROM, CS and %CS with respect to plate materials, although lower cell adhesion is reported for the hydrophobic PEEK. However, all patients showed improved functional outcomes after IR in this pilot study. In patients with shoulder stiffness following locked plating for PHF, implants should be removed and open arthrolysis should be performed, independently from the hardware material. LEVEL OF EVIDENCE: II.

[Salvage options following failed total ankle arthroplasty]. / Revisionsmöglichkeiten nach gescheiterter Sprunggelenkprothese.

The number of patients with osteoarthritis of the ankle, which are treated by arthroplasty, has continuously increased in recent years. The survival time of these implants is far below the results following hip and knee arthroplasty. In some cases a failure rate of approximately 1% per year or a survival rate of 70% after 10 years has been reported. The most frequent reasons for revision of an ankle prosthesis are aseptic loosening, technical implantation errors and persisting pain. For the revision of an ankle prosthesis there are basically two treatment options. For a long time, ankle arthrodesis was considered the gold standard after a failed prosthesis. In recent years, there has been an increasing trend towards re-implantation of an ankle prosthesis, as this preserves the functionality and mobility of the ankle joint as far as possible. Depending on the reason for failure and the size of the bony defect, a decision must be made regarding a one-stage and a two-stage procedure with bone augmentation. This article presents the advantages and disadvantages of arthrodesis and revision arthroplasty after failed primary ankle arthroplasty and highlights the special features of surgery.

A new 3D software for analysis and planning of lower limb and patellofemoral alignment: Reliability and accuracy.

BACKGROUND: The new software, mediCAD® 3D Knee Sport (mediCAD Hectec GmbH, Altdorf/Landshut, Germany), promises to combine automated digital 3D bone model generation, 3D analysis of lower limb geometry including analysis of the patellofemoral joint, and osteotomy planning. The aim of this study was to evaluate its reliability and accuracy. METHODS: In this retrospective multi-observer study, three post-mortem CTs were analysed by three observers at three points in time. Reliability was evaluated by calculating the intraclass correlation coefficient (ICC) of interobserver agreement. Accuracy was evaluated using the mean deviation D from the mean and the standard deviation SD from D. RESULTS: Ten of 18 alignment parameters showed excellent, two good and three moderate interobserver agreement. Poor agreement was found for the mechanical medial proximal tibial angle, the trochlear sulcus angle and trochlea depth. Mean interobserver ICC of all parameters ranged from 0.32 to 0.99. Fifteen of 18 parameters showed a low mean deviation D from the mean of < 2 mm / 2°. Three parameters related to the patellofemoral joint showed medium or high D (patella tilt, trochlear sulcus angle, patellar ridge angle). These parameters also showed the highest values for the SD of D. The trochlear sulcus angle was found to be the only parameter with high mean deviation (D ≥ 5 mm/5°) with D being 5.67 ± 3.23°. CONCLUSIONS: The current version of the software achieves good interobserver reliability and accuracy with the exception of a few measurement parameters.

High prevalence of missed information related on bone health in orthogeriatric patients with fragility fractures of the pelvis-an institutional register-based analysis.

This is the first study that highlighted the amount of missed information related on bone health in orthogeriatric patients suffering fragility fractures of the pelvis and also evaluated its prevalence and differing etiology in the assessed patients, regarding osteoporosis and/or osteomalacia, based on laboratory and instrumental measurements. This evaluation should become a standardized procedure in the treatment of orthogeriatric patients presenting with a FFP. INTRODUCTION: Fragility fractures of the pelvis (FFP) are common in orthogeriatric patients. Secondary fracture prevention regarding evaluation and treatment of an underlying osteoporosis or osteomalacia is still often neglected. The purpose of this study was to evaluate the amount of missed information related on bone health in older adult FFP patients, the prevalence of vitamin D deficiency in assessed patients, and if fracture type-dependent distribution patterns could be observed. METHODS: A retrospective analysis of prospectively collected data of an institutional register was performed. Patients aged 80 years and older (n = 456) admitted with a FFP from 01/2003 until 12/2019 to a level I trauma center were included. RESULTS: In 456 patients, FFP type II were leading (66.7%). Diagnostics were conducted in 37.1% of the patients regarding measurement of vitamin D levels and 21.7% regarding DXA measurements; vitamin D deficiency was observed in 62.7%, indicators for an underlying osteomalacia in 45.8%, and an osteoporosis in 46.5% of the assessed patients. CONCLUSION: Although FFP are common and will increase, there is still a lack of secondary fracture prevention, starting with information related on bone health. In the assessed patients, a high prevalence of vitamin D deficiency was present, but no significant correlation between vitamin D level and type of fracture was observed. Ongoing education for varying etiology and specific treatment of these fractures is necessary, as surgical treatment was unified, but drug therapy remains different.

[Open reduction and internal fixation of posterior malleolus fractures]. / Offene Reposition und interne Fixation von Frakturen des posterioren Malleolus.

OBJECTIVE: Stabilization of the syndesmotic complex by open reduction and internal fixation (ORIF) of the posterior malleolus, restoration of the tibial articular surface, stability of the ankle, posterior tibiofibular ligament and the incisura tibiae, reduction of the fibula into the incisura tibiae by ligamentotaxis. INDICATIONS: Unstable ankle fractures (OTA/AO type 44-B3, C1.3, C2.3, C3.3) with involvement of the posterior malleolus (type II-IV according to Bartonícek and Rammelt). CONTRAINDICATIONS: Critical general condition, circulatory disorders, severe soft tissue swelling (if necessary, first external fixator), percutaneous treatment the better alternative. SURGICAL TECHNIQUE: Positioning in unstable lateral position, dorsolateral approach dorsally of the peroneal tendons, incision of the superficial and deep fascia, retraction of the flexor hallucis longus tendon medially, visualization of the posterior malleolus, reduction and fixation. To treat the lateral malleolus fracture, preparation of a full-thickness flap above the peroneal tendons on the fibula, treatment according to AO principles. For the treatment of the medial malleolus positioning in supine position without changing the sterile covers, medial approach for the medial malleolus, wound closure. POSTOPERATIVE MANAGEMENT: Six weeks partial weight bearing (20 kg), early functional exercise, exercise of the flexor hallucis longus muscle; transition to full weight bearing after clinical and radiological follow-up after 6 weeks RESULTS: Few clinical results on open ORIF of the posterior malleolus have been published. However, most studies found that ORIF resulted in better reconstruction of the distal articular surface and the tibial incisura, better reduction of the fibula into the tibial incisura, stabilization of the distal tibiofibular joint and better clinical results, regardless of fragment size, when compared to closed reduction or untreated fragments.

Three-dimensional assessment of patellofemoral anatomy: Reliability and reference ranges.

BACKGROUND: Three-dimensional (3D) imaging and analysis offer new possibilities in preoperative diagnostics and surgical planning. Simultaneous 3D analysis of the joint angles and the patellofemoral anatomy allow for a realistic assessment of bony pathologies in patients with patellofemoral complaints. This study aims to develop a standardized and validated assessment of the 3D patellofemoral morphology and to establish reference ranges. METHODS: Thirteen patellofemoral anatomic landmarks were defined on 3D bone models of the lower limbs based on computer tomography data and evaluated regarding inter- and intra-observer variability. Further, 60 3D models of the lower limbs of young subjects without any previous knee operation/injury were assessed and rescaled reference values for relevant patellofemoral indices were obtained. RESULTS: The mean inter- and intra-observer deviation of all landmarks was below 2.3 mm. The interobserver intraclass correlation coefficient (ICC) was between 0.8 and 1.0 and the intra-observer ICC between 0.68 and 0.99 for all patellofemoral parameters. The calculated reference ranges are: Insall-Salvati index 1.0-1.4; patella tilt 6-18°; patella shift -4 to 3 mm; patella facet angle 118-131°; sulcus angle 141-156°; trochlear depth 3-6 mm; tibial-tuberosity to trochlear groove distance(TT-TG) 2D 14-21 mm; TT-TG 3D 11-18 mm; lateral trochlear inclination 13-23°; trochlear facet angle 43-65°. CONCLUSION: The demonstrated 3D analysis of the patellofemoral anatomy can be performed with high inter- and intra-observer correlation. Applying the obtained reference ranges and using existing 3D assessment tools for lower limb alignment, a preoperative 3D analysis and planning for complex knee procedures now is possible.

[Aftercare following surgical treatment of ankle fractures : What is the current state of knowledge?] / Nachbehandlung von operativ versorgten Sprunggelenkfrakturen : Was ist der aktuelle Wissensstand?

BACKGROUND: Ankle fractures are among the most common fractures in adults but often with unsatisfactory long-term results. In recent years several new surgical treatment approaches have been developed but little has changed regarding the aftercare. The postoperative treatment can be divided into two main components, weight bearing and mobilization. In Germany most patients are still recommended to be immobilized with partial weight bearing for 6 weeks after surgery. OBJECTIVE: The aim of this review is to present the current evidence on postoperative treatment based on an extensive literature search. MATERIAL AND METHODS: A total of seven prospective randomized controlled trials (RCT) compared early and delayed full weight bearing and six RCTs compared ankle mobilization with a form of immobilization. RESULTS: In none of these studies did early full weight bearing lead to an increased complication rate but some studies found a shortened time before return to work and, at least in the short term, better clinical results. Immediate mobilization led to an increased complication rate in only one out of six studies. It also appeared that mobilization led to a reduced time before return to work and, in the short term, to better clinical outcomes. The comparability of the studies was limited as in most cases different clinical scores and parameters were collated. In addition, information on patient age, fracture type, bone quality, comorbidities, and the implants used was often inadequate and post-treatment regimens sometimes differed significantly. CONCLUSION: The early functional therapy following surgically treated ankle fractures increased the rate of wound healing complications in only one of 13 studies, otherwise there were no significant differences in complication rates; however, early functional therapy partly shortened the time to return to work and led to better clinical results in the short term. For future studies, standardization of the parameters assessed would be important to provide clear evidence-based guidelines on follow-up treatment for specific fractures and patient populations.

[Rotator cuff tear : Indications and pathology-specific reconstructive procedures]. / Rotatorenmanschettenruptur : Indikationen und pathologiespezifische rekonstruktive Verfahren.

Rotator cuff (RC) tears comprise a broad spectrum of lesions ranging from partial to full thickness tears of a single tendon and massive cuff tears. Both glenohumeral trauma as well as degenerative processes can result in tearing of the RC. Treatment therefore requires a meticulous diagnosis as well as a differentiated approach by careful consideration of morphological and patient-specific factors. The pathogenesis, tear morphology, clinical symptoms and functional demands of the patient determine the therapeutic approach. Despite pathological and individual patient-related factors, early surgical repair is generally recommended for traumatic RC tears in young patients and in patients with high functional demands due to the high risk of tear progression. The results of RC repair are negatively correlated with the size of the lesion, the number of tendons involved, the degree of tendon retraction, muscular alteration and patient age. This article provides an overview of the various pathogenesis, indications and surgical repair of RC tears with respect to modern pathology-specific reconstructive procedures.

[Locking plate fixation of distal periprosthetic femoral fractures : Clinical outcome and mortality]. / Winkelstabile Plattenosteosynthese bei distalen periprothetischen Femurfrakturen : Klinisches Outcome und Mortalität.

BACKGROUND: The care of distal periprosthetic femoral fractures (PFF) is becoming a major interdisciplinary challenge due to demographic developments. The operative treatment is often performed (depending on the type of fracture) by means of locking plate fixation (LPF), although little data on the clinical outcome exist by now. The aim of the study is to identify risk factors for a poor outcome and increased mortality METHODS: In this retrospective study, 36 cases with distal PFF were examined. Exclusively treatment with LPF were included. Relevant previous illnesses (ASA score, Charlson index), fracture morphology and major complications were recorded as well as 1- and 3- year mortality. The clinical outcome was detected by using the Lysholm score. RESULTS: The 1- and 3- year mortality were 9% and 26% - exclusively affecting ASA 3 and 4 patients. The Lysholm Score showed a high variability (65 ± 27 points) with higher values in the ASA 1-2 subgroup (82 vs. 63 points) but independent of fracture type. The preoperative ASA score, the Charlson comorbidity index, and the patient age were determined to be decisive for 3-year mortality. CONCLUSION: This case series displayed a high absolute mortality even if the rate was slightly lower compared to previously published data. The rate of secondary dislocations, lack of fracture healing or follow-up operations were also low. The LPF therefore appears to be a suitable treatment for fractures with a stable prosthesis. However, there is a high variability in the clinical outcome regardless of the type of fracture and significantly increased mortality rates in previously ill patients.