Impact of tortuous flow on bacteria streamer development in microfluidic system during filtration.

The way in which bacterial communities colonize flow in porous media is of importance, but basic knowledge on the dynamic of these phenomena is still missing. The aim of this work is to develop microfluidic experiments in order to progress in the understanding of bacteria capture in filters and membranes. PDMS microfluidic devices mimicking filtration processes have been developed to allow a direct dynamic observation of bacteria across 10 or 20 µm width microchannels. When filtered in such devices, bacteria behave surprisingly: Escherichia coli, Pseudomonas aeruginosa or Staphylococcus aureus accumulate in the downstream zone of the filter and form large streamers which oscillate in the flow. In this study, streamer formation is put in evidence for bacteria suspension in non nutritive conditions in less than 1 h. This result is totally different from the one observed in same system with "inert" particles or dead bacteria which are captured in the bottleneck zone and are accumulated in the upstream zone. Observations within different flow geometries (straight channels, connected channels, and staggered row pillars) show that the bacteria streamer development is influenced by the flow configuration and, particularly by the presence of tortuosity within the microchannels zone. These results are discussed at the light of 3D flow simulations. In confined systems and in laminar flow, there is secondary flow (z-velocities) superimposed to the streamwise motion (in xy plane). The presence of the secondary flow in the microsystems has an effect on the bacterial adhesion. A scenario in three steps is established to describe the formation of the streamers and to explain the positive effect of tortuous flow on the development kinetics.

Simulation of particle capture in a microfiltration membrane.

The present study takes an interest in the description of the fouling mechanisms by a numerical approach at the microscopic scale. At first, an X-ray tomography has enabled the modelling of the membrane structure for the numerical simulations. Next, for different particle size, a same volume of particles has been sent in the modelled membrane and the final permeability has been computed. Thus, the influence of the particle size on the fouling has been seen. An observation of the particles penetration in the membrane has been realised to detail this influence. The Hermia relations were used in order to determinate the predominant fouling mechanism or the succession of predominant fouling mechanisms. But, without an accurate calculation of the first derivative, it is not possible to define cleanly the predominant fouling mechanism for a low filtered volume. Nevertheless, the perspectives of the local approach with the numerical simulation seem interesting.

Colloidal surface interactions and membrane fouling: investigations at pore scale.

In this paper, we examine the contributions of colloidal surface interaction in filtration processes. In a first part, we describe the way surface interactions affect the transport of colloidal particles or macromolecules towards a membrane, and its theoretical description. The concept of critical flux is introduced and linked to particle-membrane wall and particle-particle surface interactions. From this review, it seems important to consider how surface interactions occur at pore scale and control the development of fouling layers. In this context, we report in a second part experiments where the capture of micron-sized particles is observed in a poly-dimethylsiloxane (PDMS) microfluidic filtration device. Direct observations of the filtering part by video-microscopy allow to investigate the way the fouling of the microchannels by the particles is taking place. The experimental results underline the important role played by the particle-wall interactions on the way particles are captured during filtration. A small change in surface properties of the PDMS has important consequences in the way pore clogging occurs: in more hydrophobic conditions the particles first form arches at the microchannels entrance, then leading to the growth of a filtration cake, whereas in more hydrophilic conditions the particles are captured on the walls between the microchannels, then leading to the progressive formation of dendrites. To conclude, both experimental and theoretical approaches show the important role played by surface interactions in filtration processes. The complex interplay between multi-body surface interactions and hydrodynamics at nanometric scale leads to clogging phenomena observed experimentally in microfluidic systems that have not been predicted by numerical simulations. In the future, the two way coupling between simulation and experimental approaches at the pore scale have to progress in order to reach a full understanding of the contribution of colloid science in membrane processes.

Ion-specific repulsive interactions in colloidal silica dispersions evidenced through osmotic compression measurements and implication in frontal ultrafiltration experiments.

Comparative osmotic compression experiments were performed on colloidal silica dispersions in the presence of various chloride salts at the same 0.01 M concentration with different counterions and highlighted the influence of ionic specificity on the resistance to water removal. These results were complemented with frontal ultrafiltration measurements that demonstrate modulation of the permeate flux according to the salt used.

Filtration of a bacterial fermentation broth: harvest conditions effects on cake hydraulic resistance.

The hydraulic resistance of cakes formed during the ultrafiltration of Streptomyces pristinaespiralis broths has been investigated for different harvesting conditions. S. pristinaespiralis broth was harvested after the point of microorganism activity declines (0-h aged broth) and afterwards held for different durations of up to 16 h (16 aged broths). Aging behavior occurring between the end of microorganism activity and harvest was compared for different acidification procedures (pH) and the mechanisms for which the hydraulic resistance of the cake is affected by aging have been investigated. For broths harvested under conditions where the acidification is fixed at pH 2 or 3, hydraulic resistance associated with cake build-up is directly determined by the interactions between the cells. Holding broths beyond 5 h contributes to a release of a soluble component from the cell surface. Enhanced cell surface interactions then turn the cake structure into a more open one and reduce the specific hydraulic resistance. For broths harvested under conditions where the acidification is fixed at pH 4, hydraulic resistance associated with cake build-up is both determined by cell interactions and cell morphology. The cause of the increase in specific hydraulic resistance with aging is due to the binding of a soluble component released by the microorganisms, which decreases the cell surface interactions.

[Imposing "calcium milk" lithiasis in giant hydronephrosis]. / Imponente calcolosi a "latte di calce" in idronefrosi gigante.

The authors report a quite unusual case of "milk of calcium renal Stone" in unilateral giant Hydronephrosis. Radiographic, sonographic, intravenous urographic and TC aspects are described and prominence il given to morphostructural information obtained through digital image techniques of pyeloureteral zone junction and of "milk of calcium renal Stone". The authors discuss the pathogenesis of the renal Stone type and emphasize the convenience of investigative acts to clear up the ethio-pathogenetic role of pyeloureteral infections.

Microbial degradation of oil spills enhanced by a slow-release fertilizer.

The improved cleanup of marine oil spills by stimulating biodegradation through the use of a slow-release fertilizer is reported. A paraffin-supported fertilizer containing MgNH4PO4 as active ingredient was developed and evaluated in laboratory and field experiments using quantitative infrared spectrometry and chromatographic techniques. The biodegradation of Sarir crude oil in the sea was considerably enhanced by paraffin-supported fertilizer. After 21 days 63% had disappeared as compared to 40% in the control area.

Identification of n-decane oxidation products in Corynebacterium cultures by combined gas chromatography-mass spectrometry.

The gas chromatography-mass spectrometry technique was employed to characterize n-decane oxidation products of Corynebacterium strains 7E1C and 269 (SNAM Progetti collection) after 73 h of incubation at 35 C. Corynebacterium 7E1C accumulated consistent amounts of esters of long chain acids with long chain alcohols, mainly decyldecanoate as well as products with mono- and diterminal carboxylic functions. Corynebacterium 269 yielded 1-decanol and 1-10 decanediol as principal oxidation products.