Influence of X-ray spectrum and bowtie filter characterisation on the accuracy of Monte Carlo simulated organ doses: Validation in a whole-body CT scanning mode.

PURPOSE: For patient-specific CT dosimetry, Monte Carlo dose simulations require an accurate description of the CT scanner. However, quantitative spectral information and information on the bowtie filter material and shape from the manufacturer is often not available. In this study, the influence of different X-ray spectra and bowtie filter characterisation methods on simulated CT organ doses is studied. METHODS: Using ImpactMC, organ doses of whole-body CTs were simulated in twenty adult whole-body voxel models, generated from PET/CT examinations previously conducted in these patients. Simulated CT organ doses based on the manufacturer X-ray spectra and bowtie filter data were compared with those obtained using alternative characterisation models, including spectrum generators and experimentally measured dose data. A total of four different X-ray spectra and one bowtie filter model were defined based on these data. RESULTS: For all X-ray spectra and bowtie filter combinations, estimated CT organ doses are within 6% from those resulting from simulations with the CT characterisation models provided by the manufacturer. While varying the bowtie filter model results in CT organ dose differences smaller than 1%, dose differences up to 6% are observed when X-ray spectra are not based on the quantitative data from the manufacturer. CONCLUSIONS: Estimated organ doses slightly depend on the applied CT characterisation model. When manufacturer's data are not available, half-value layer and dose measurements provide sufficient input to obtain equivalent X-ray spectra and bowtie filter profiles, respectively.

Prediction Model for Defects in Lead and Lead-free Aprons.

ABSTRACT: Personal radiation protective equipment (PRPE) is prone to defects in the attenuating layers, resulting in inadequate protection. Hence, quality control (QC) of PRPE is needed to assess its integrity. Unfortunately, QC of PRPE is laborious and time consuming. This study aimed to predict the QC outcome of PRPE without x-ray imaging based on readily available predictors. PRPE QC data of a general hospital from 2018 to 2023 was used for both prediction models based on logistic regression and random forests (RF). The data were divided into a training set containing all data from 2018 to 2022 and a holdout set containing the data from 2023. The predictors were brand, age, size, type, visual defects, and department. The prediction performances were compared using confusion matrices and visualized with receiver operating characteristic (ROC) curves. Prediction accuracies of at least 80% were achieved. Further model tuning especially improved the RF model to a precision up to 97% with a sensitivity of 80% and specificity of 86%. All predictors, except visual defects, significantly impacted the probability of passing. The predictor brand had the largest contribution to the predictive performance. The difference in pass probability between the best-performing and the worst-performing brand was 35.1%. The results highlight the potential of predicting PRPE QC outcome without x rays. The proposed prediction approach is a significant contribution to an effective QC strategy by reducing time consuming x-ray QC tests and focusing on garments with higher probability of being defective. Further research is recommended.

Evaluation of Virtual Grid processed clinical pelvic radiographs.

BACKGROUND: A physical scatter grid is not often used in pelvic bedside examinations. However, multiple studies regarding scatter correction software (SC SW) are available for mobile chest radiography but the results are unclear for pelvic radiography. PURPOSE: We evaluated SC SW of Fujifilm (Virtual Grid) on gridless pelvic radiographs obtained from a human Thiel-embalmed body to investigate the potential of Virtual Grid in pelvic bedside examinations. METHODS: Gridless, Virtual Grid, and physical grid pelvic radiographs of a female Thiel-embalmed body were collected with a broad range of tube loads. Different software (SW) grid ratios-6:1, 10:1, 13:1, 17:1, and 20:1-were applied on the gridless radiographs to investigate the image quality (IQ) improvement of 13 IQ criteria in a visual grading analysis (VGA) setup. RESULTS: Gridless radiograph scores are significantly lower (p < 0.001) than Virtual Grid and physical grid scores obtained with the same tube load. Virtual Grid radiographs score better than gridless radiographs obtained with a higher tube load which makes a dose reduction possible. The averaged ratings of the IQ criteria processed with different SW ratios increase with increasing SW grid ratios. However, no statistically significant differences were found between the SW grid ratios. The scores of the physical grid radiographs are higher than those of the Virtual Grid radiographs when they are obtained with the same tube load. CONCLUSION: We conclude that Virtual Grid with an SW ratio of 6:1 improves the IQ of gridless pelvic radiographs in such a manner that a dose reduction is possible. However, physical grid radiograph ratings are higher compared to those of Virtual Grid radiographs.

Absolute ground truth-based validation of computer-aided nodule detection and volumetry in low-dose CT imaging.

PURPOSE: To validate the performance of computer-aided detection (CAD) and volumetry software using an anthropomorphic phantom with a ground truth (GT) set of 3D-printed nodules. METHODS: The Kyoto Kaguku Lungman phantom, containing 3D-printed solid nodules including six diameters (4 to 9 mm) and three morphologies (smooth, lobulated, spiculated), was scanned at varying CTDIvol levels (6.04, 1.54 and 0.20 mGy). Combinations of reconstruction algorithms (iterative and deep learning image reconstruction) and kernels (soft and hard) were applied. Detection, volumetry and density results recorded by a commercially available AI-based algorithm (AVIEW LCS + ) were compared to the absolute GT, which was determined through µCT scanning at 50 µm resolution. The associations between image acquisition parameters or nodule characteristics and accuracy of nodule detection and characterization were analyzed with chi square tests and multiple linear regression. RESULTS: High levels of detection sensitivity and precision (minimal 83 % and 91 % respectively) were observed across all acquisitions. Neither reconstruction algorithm nor radiation dose showed significant associations with detection. Nodule diameter however showed a highly significant association with detection (p < 0.0001). Volumetric measurements for nodules > 6 mm were accurate within 10 % absolute range from volumeGT, regardless of dose and reconstruction. Nodule diameter and morphology are major determinants of volumetric accuracy (p < 0.001). Density assignment was not significantly influenced by any parameters. CONCLUSIONS: Our study confirms the software's accurate performance in nodule volumetry, detection and density characterization with robustness for variations in CT imaging protocols. This study suggests the incorporation of similar phantom setups in quality assurance of CAD tools.

Accuracy of patient-specific CT organ doses from Monte Carlo simulations: influence of CT-based voxel models.

Monte Carlo simulations using patient CT images as input are the gold standard to perform patient-specific dosimetry. However, in standard clinical practice patient's CT images are limited to the reconstructed CT scan range. In this study, organ dose calculations were performed with ImpactMC for chest and cardiac CT using whole-body and anatomy-specific voxel models to estimate the accuracy of CT organ doses based on the latter model. When the 3D patient model is limited to the CT scan range, CT organ doses from Monte Carlo simulations are the most accurate for organs entirely in the field of view. For these organs only the radiation dose related to scatter from the rest of the body is not incorporated. For organs lying partially outside the field of view organ doses are overestimated by not accounting for the non-irradiated tissue mass. This overestimation depends strongly on the amount of the organ volume located outside the field of view. To get a more accurate estimation of the radiation dose to these organs, the ICRP reference organ masses and densities could form a solution. Except for the breast, good agreement in dose was found for most organs. Voxel models generated from clinical CT examinations do not include the overscan in the z-direction. The availability of whole-body voxel models allowed to study this influence as well. As expected, overscan induces slightly higher organ doses.

Peripheral blood lymphocytes differ in DNA damage response after exposure to X-rays with different physical properties.

Introduction: In radiology, low X-ray energies (<140 keV) are used to obtain an optimal image while in radiotherapy, higher X-ray energies (MeV) are used to eradicate tumor tissue. In radiation research, both these X-ray energies being used to extrapolate in vitro research to clinical practice. However, the energy deposition of X-rays depends on their energy spectrum, which might lead to changes in biological response. Therefore, this study compared the DNA damage response (DDR) in peripheral blood lymphocytes (PBLs) exposed to X-rays with varying beam quality, mean photon energy (MPE) and dose rate.Methods: The DDR was evaluated in peripheral blood lymphocytes (PBLs) by the É£-H2AX foci assay, the cytokinesis-block micronucleus assay and an SYTOX-based cell death assay, combined with specific cell death inhibitors. Cell cultures were irradiated with a 220 kV X-ray research cabinet (SARRP, X-Strahl) or a 6 MV X-ray linear accelerator (Elekta Synergy). Three main physical parameters were investigated: beam quality (V), MPE (eV) and dose rate (Gy/min). Additional copper (Cu) filtration caused variation in the MPE (78 keV, 94 keV, 118 keV) at SARRP; dose rates were varied by adjusting tube current for 220 kV X-rays (0.33-3 Gy/min) or water-phantom depth in the 6 MV set-up (3-6 Gy/min).Results: The induction of chromosomal damage and initial (30 min) DNA double-stranded breaks (DSBs) were significantly higher for 220 kV X-rays compared to 6 MV X-rays, while cell death induction was similar. Specific cell death inhibitors for apoptosis, necroptosis and ferroptosis were not capable of blocking cell death after irradiation using low or high-energy X-rays. Additional Cu filtration increased the MPE, which significantly decreased the amount of chromosomal damage and DSBs. Within the tested ranges no specific effects of dose rate variation were observed.Conclusion: The DDR in PBLs is influenced by the beam quality and MPE. This study reinforces the need for consideration and inclusion of all physical parameters in radiation-related studies.

Development, Feasibility, and Knowledge Impact of a Massive Open Online Course on Radiation Safety: A Multicentre Prospective Cohort Study.

OBJECTIVE: This study reports the development of an innovative, interactive Massive Open Online Course (MOOC) teaching radiation safety principles in the vascular workplace, using stepwise e-learning with multiple choice question tests (MCQs), educational videos, and a serious game. The aim was to study the MOOC impact on radiation safety knowledge and assess its feasibility and acceptability. METHODS: An international multicentre prospective study included team members active in the hybrid operating room. The MOOC was offered voluntarily via a secure online learning platform. A standardised MCQ test (15 questions) assessed radiation safety knowledge pre- and post-course (range 0 - 100%). Acceptability and feasibility were tested via the previously validated, Evaluating e-learning system success (EESS) model, using five point Likert scales. RESULTS: In eight centres across four countries, 150 of 203 invited endovascular team members consented. Over a seven week study period, surgeons (28%, including vascular surgery trainees and consultants), nurses (27%, including scrub, circulating and anaesthetic nurses), anaesthetists (43%, including trainees and consultants), and radiographers (3%) participated. Of those, 67% completed the course. The average radiation knowledge improved by 22.8% (95% CI 19.5 - 26.0%; p < .001) after MOOC completion, from 48% to 71% (standard deviation [SD] 14 and 15% respectively), requiring a mean time investment of 169 minutes (SD 89 minutes). In centres with a radiographer, mean knowledge gain after MOOC completion was significantly smaller (14%, SD 19% vs. 24%, SD 16%, p = .036). The course was deemed feasible and acceptable according to the EESS model with a total mean score of 3.68/5. CONCLUSION: This newly developed, multimodal MOOC was deemed feasible and effective across multiple international centres. The MOOC significantly contributes to radiation safety education of the entire endovascular team, improving radiation safety knowledge. The course may optimise workplace radiation safety behaviour and therefore enhance team and patient safety.

EFOMP policy statement NO. 19: Dosimetry in nuclear medicine therapy - Molecular radiotherapy.

The European Council Directive 2013/59/Euratom (BSS Directive) includes optimisation of treatment with radiotherapeutic procedures based on patient dosimetry and verification of the absorbed doses delivered. The present policy statement summarises aspects of three directives relating to the therapeutic use of radiopharmaceuticals and medical devices, and outlines the steps needed for implementation of patient dosimetry for radioactive drugs. To support the transition from administrations of fixed activities to personalised treatments based on patient-specific dosimetry, EFOMP presents a number of recommendations including: increased networking between centres and disciplines to support data collection and development of codes-of-practice; resourcing to support an infrastructure that permits routine patient dosimetry; research funding to support investigation into individualised treatments; inter-disciplinary training and education programmes; and support for investigator led clinical trials. Close collaborations between the medical physicist and responsible practitioner are encouraged to develop a similar pathway as is routine for external beam radiotherapy and brachytherapy. EFOMP's policy is to promote the roles and responsibilities of medical physics throughout Europe in the development of molecular radiotherapy to ensure patient benefit. As the BSS directive is adopted throughout Europe, unprecedented opportunities arise to develop informed treatments that will mitigate the risks of under- or over-treatments.

A systematic review and meta-analysis on the radiation dose of computed tomography in hybrid nuclear medicine imaging.

BACKGROUND: While diagnostic reference levels (DRLs) are well-established for the radiopharmaceutical part, published DRLs for the CT component of positron emission tomography/computed tomography (PET/CT) and single photon emission computed tomography/computed tomography (SPECT/CT) are limited. This systematic review and meta-analysis provides an overview of the different objectives of CT in hybrid imaging and summarizes reported CT dose values for the most common PET/CT and SPECT/CT examinations. Also, an overview of already proposed national DRLs is given. METHODS: A systematic literature search was performed to identify original articles reporting CT dose index volume (CTDIvol), dose-length product (DLP) and/or national DRLs for the most frequently performed PET/CT and/or SPECT/CT examinations. Data were grouped according to the clinical objective: diagnostic (D-CT), anatomical localisation (AL-CT) or attenuation correction (AC-CT) CT. Random-effects meta-analyses were conducted. RESULTS: Twenty-seven articles were identified of which twelve reported national DRLs. For brain and tumour PET/CT imaging, CTDIvol and DLP values were higher for a D-CT (brain: 26.7 mGy, 483 mGy cm; tumour: 8.8 mGy, 697 mGy cm) than for an AC/AL-CT (brain: 11.3 mGy, 216 mGy cm; tumour: 4.3 mGy, 419 mGy cm). Similar conclusions were found for bone and parathyroid SPECT/CT studies: D-CT (bone: 6.5 mGy, 339 mGy cm; parathyroid: 15.1 mGy, 347 mGy cm) results in higher doses than AL-CT (bone: 3.8 mGy, 156 mGy cm; parathyroid: 4.9 mGy, 166 mGy cm). For cardiac (AC-CT), mIBG/octreotide, thyroid and post-thyroid ablation (AC/AL-CT) SPECT/CT pooled mean CTDIvol (DLP) values were 1.8 mGy (33 mGy cm), 4.6 mGy (208 mGy cm), 3.1 mGy (105 mGy cm) and 4.6 mGy (145 mGy cm), respectively. For all examinations, high variability in nuclear medicine practice was observed. CONCLUSION: The large variation in CT dose values and national DRLs highlights the need for optimisation in hybrid imaging and justifies the clinical implementation for nuclear medicine specific DRLs.

Education and training in radiation protection in Europe: results from the EURAMED Rocc-n-Roll project survey.

PURPOSE: To analyse the existing radiation protection (RP) education and training (E&T) capabilities in the European Union and identify associated needs, problems and challenges. METHOD: An online survey was disseminated via the EURAMED Rocc-n-Roll consortium network and prominent medical societies in the field of radiological research. The survey sections analyse the RP E&T during undergraduate, residency/internship and continuous professional development; RP E&T problems and legal implementation. Differences were analysed by European geographic regions, profession, years of professional experience and main area of practice/research. RESULTS: The majority of the 550 respondents indicated that RP topics are part of undergraduate curricula in all courses for their profession and country (55%); however, hands-on practical training is not included according to 30% of the respondents. The lack of E&T, practical aspects in current E&T, and mandatory continuing E&T were considered the major problems. The legal requirement that obtained higher implementation score was the inclusion of the practical aspects of medical radiological procedures on education (86%), and lower score was obtained for the inclusion of RP E&T on medical and dental school curriculums (61%). CONCLUSIONS: A heterogeneity in RP E&T during undergraduate, residency/internship and continuous professional development is evident across Europe. Differences were noted per area of practice/research, profession, and European geographic region. A large variation in RP E&T problem rating was also obtained.

Multimodality 3D image fusion with live fluoroscopy reduces radiation dose during catheterization of congenital heart defects.

Introduction: Imaging fusion technology is promising as it is radiation and contrast sparing. Herein, we compare conventional biplane angiography to multimodality image fusion with live fluoroscopy using two-dimensional (2D)-three-dimensional (3D) registration (MMIF2D-3D) and assess MMIF2D-3D impact on radiation exposure and contrast volume during cardiac catheterization of patients with congenital heart disease (CHD). Methods: We matched institutional MMIF2D-3D procedures and controls according to patient characteristics (body mass index, age, and gender) and the seven procedure-type subgroups. Then, we matched the number of tests and controls per subgroup using chronological ordering or propensity score matching. Subsequently, we combined the matched subgroups into larger subgroups of similar procedure type, keeping subgroups with at least 10 test and 10 control cases. Air kerma (AK) and dose area product (DAP) were normalized by body weight (BW), product of body weight and fluoroscopy time (BW × FT), or product of body weight and number of frames (BW × FR), and stratified by acquisition plane and irradiation event type (fluoroscopy or acquisition). Three senior interventionists evaluated the relevance of MMIF2D-3D (5-point Likert scale). Results: The Overall group consisted of 54 MMIF2D-3D cases. The combined and matched subgroups were pulmonary artery stenting (StentPUL), aorta angioplasty (PlastyAO), pulmonary artery angioplasty (PlastyPUL), or a combination of the latter two (Plasty). The FT of the lateral plane reduced significantly by 69.6% for the Overall MMIF2D-3D population. AKBW and DAPBW decreased, respectively, by 43.9% and 39.3% (Overall group), 49.3% and 54.9% (PlastyAO), and 36.7% and 44.4% for the Plasty subgroup. All the aforementioned reductions were statistically significant except for DAPBW in the Overall and Plasty (sub)groups. The decrease of AKBW and DAPBW in the StentPUL and PlastyPUL subgroups was not statistically significant. The decrease in the median values of the weight-normalized contrast volume (CMCBW) in all five subgroups was not significant. Cardiologists considered MMIF2D-3D very useful with a median score of 4. Conclusion: In our institution, MMIF2D-3D overall enabled significant AKBW reduction during the catheterization of CHD patients and was mainly driven by reduced FT in the lateral plane. We observed significant AKBW reduction in the Plasty and PlastyAO subgroups and DAPBW reduction in the PlastyAO subgroup. However, the decrease in CMCBW was not significant.

Integrity of personal radiation protective equipment (PRPE): a 4-year longitudinal follow-up study.

BACKGROUND: Personal radiation protective equipment (PRPE) such as lead aprons minimises radiation exposure of operators using X-ray systems. However, PRPE might be prone to cracks in the attenuating layer resulting in inadequate radiation protection. This study aims to investigate the prevalence, qualification and quantification of PRPE integrity during a longitudinal follow-up study. METHODS: All PRPE of a large, general hospital was evaluated yearly in the period 2018-2021. The equipment was inspected on a tele-operated X-ray table, and tears were qualified and quantified using an X-ray opaque ruler. Rejection criteria of Lambert & McKeon, with an extra rejection criterion of 15 mm2 for individual tears, were applied to accept or reject further use of the PRPE. RESULTS: Over the 4-year follow-up period, a total of 1011 pieces of PRPE were evaluated. In total, 47.3% of the PRPE showed tears of which 31% exceeded the mentioned rejection criteria. Remarkably, of the 287 newly registered pieces of PRPE, 6.0% showed tears in the first year of use of which 88.2% needed to be rejected. Also, 48% of the repaired PRPE was rejected again in the consecutive year. CONCLUSIONS: PRPE is prone to cracks. Up to 50% of PRPE showed tears and cracks resulting in 31% rejections. Newly purchased PRPE is not guaranteed to remain free of cracks and tears in the first year of use. Repair does not guarantee a long-term solution for prolonging the lifespan. Regular X-ray-based integrity analysis of PRPE is needed to ensure adequate radioprotection for operators using X-ray systems.

Education and training in radiation protection in Europe: an analysis from the EURAMED rocc-n-roll project.

BACKGROUND: A Strengths, weaknesses, opportunities and threats analysis was performed to understand the status quo of education and training in radiation protection (RP) and to develop a coordinated European approach to RP training needs based on stakeholder consensus and existing activities in the field. Fourteen team members represented six European professional societies, one European voluntary organisation, two international healthcare organisations and five professions, namely: Medical Physicists; Nuclear Medicine Physicians; Radiologists; Radiation Oncologists and Radiographers. Four subgroups analysed the "Strengths", "Weaknesses", "Opportunities" and "Threats" related to E&T in RP developed under previous European Union (EU) programmes and on the Guidelines on Radiation Protection Education and Training of Medical Professionals in the EU. RESULTS: Consensus agreement identified four themes for strengths and opportunities, namely: (1) existing structures and training recommendations; (2) RP training needs assessment and education & training (E&T) model(s) development; (3) E&T dissemination, harmonisation, and accreditation; (4) financial supports. Weaknesses and Threats analysis identified two themes: (1) awareness and prioritisation at a national/global level and (2) awareness and prioritisation by healthcare professional groups and researchers. CONCLUSIONS: A lack of effective implementation of RP principles in daily practice was identified. EuRnR strategic planning needs to consider processes at European, national and local levels. Success is dependent upon efficient governance structures and expert leadership. Financial support is required to allow the stakeholder professional agencies to have sufficient resources to achieve a pan European radiation protection training network which is sustainable and accredited across multiple national domains.

Cervical and lumbar spine imaging after traffic and occupational accidents: Evaluation of the use of imaging techniques, cumulative radiation dose and associated lifetime cancer risk.

PURPOSE: To study number and type of imaging techniques, cumulative radiation exposure and radiation-induced risk from repeated imaging of cervical and lumbar spine attained after traffic or occupational accident. METHOD: The study cohort comprised of 500 patients after traffic or occupational accident. Amount of radiography, CT and MRI procedures and injury severity were tallied for each patient. Cumulative effective dose (CED), expressed in millisieverts (mSv), was estimated by summing up typical effective dose values. Total lifetime cancer risks and associated risk category were estimated by using risk coefficients, specified according to sex, age at exposure and exposed region. RESULTS: A total of 2,107 imaging procedures were performed of which 30% were radiographs (n = 631), 21% were CT (n = 438) and 49% were MRI (n = 1,038). Abbreviated Injury Scale was low (1-2) in all cases (except one). The cohort included 352 patients after traffic accident and 148 after occupational accident. Mean CED of these two groups were 4.4 mSv and 9.4 mSv, respectively. No patient had a CED higher than 100 mSv. Nineteen patients fell into the 'moderate risk' group, meaning that the additional risk of fatal cancer from accumulated radiation exposure lies between 1 in 1,000 and 1 in 100. CONCLUSIONS: MRI was the most used imaging technique. No CED from repeated imaging procedures after minor or moderate traffic or occupational accident exceeded 100 mSv. However, nineteen patients fell into the 'moderate risk' group of developing radiation-induced cancer. Tracking radiation exposure can be beneficial in identifying those with high CED, although education on its proper use is necessary.

Evaluation of Virtual Grid Processed Clinical Chest Radiographs.

OBJECTIVES: We evaluated the different Virtual Grid software ratios (Fujifilm, Tokyo, Japan) on gridless clinical chest radiographs with visual grading analysis (VGA). In addition, we investigated the 2 image quality assessment algorithms (IQAAs). MATERIALS AND METHODS: Gridless chest radiographs of 50 different intensive care unit patients were collected and afterward processed with Virtual Grid software. Different software (SW) grid ratios-6:1, 10:1, 13:1, 17:1, and 20:1-were applied to investigate the image quality (IQ) improvement. Image quality improvement was assessed by 4 radiologists in a relative VGA study where the reference image was processed with SW grid ratio of 10:1. One of the IQAAs used to analyze the radiographs was implemented in our department but was originally developed by the research group of the Duke University Medical Center. A general IQ score (IQS) was calculated based on contrast, detail, and noise. Another IQAA-NIQE (naturalness image quality evaluator)-available in Matlab (MATLAB Research R2019b; the MathWorks, Inc) was evaluated. Both methods were compared with VGA. RESULTS: Visual grading analysis scores of gridless radiographs are significantly lower ( P < 0.001). Image quality increases with increasing SW grid ratios, up to grid ratio of 17:1. However, some anatomical structures-spine and ribs-are negatively affected by the higher grid ratios. A correlation coefficient of 0.99 between the VGA and the IQS was observed. The correlation coefficient between VGA and NIQE was 1.00. CONCLUSIONS: Virtual Grid with SW grid ratio of 6:1 improves the IQ of gridless chest bedside radiographs. The grid ratios 17:1 and 20:1 should be considered carefully as the SW negatively affects parts of the ribs and spine. Therefore, grid ratios up to 13:1 can be advised. The IQAAs are promising and could be used to detect differences in IQ when different scatter correction SW settings are used.

Tumour characteristics of screen-detected and interval cancers in the Flemish Breast Cancer Screening Programme: A mammographic breast density study.

OBJECTIVE: The objective is to investigate tumour prognostic factors versus breast density in screen-detected cancers and interval cancers. The results may highlight the need for more personalised screening protocols based on breast density in organized screening programmes. STUDY DESIGN: A retrospective study was performed of tumour characteristics of screen-detected cancers (n=468) and interval cancers (n=515) of 983 women who participated in the Flemish Breast Cancer Screening Programme in 2009-2010. Breast density was obtained from the screening programme data. Information on nodal invasion and histological grading was taken from the Belgian Cancer Registry. Tumour size and proliferation and receptor expression status were retrieved from pathology reports. The differences in tumour characteristics between screen-detected and interval cancers as well as the variation in these variables with breast density in both groups were studied by logistic regression. RESULTS: A comparison of tumour characteristics between screen-detected cancers and interval cancers systematically showed features of more aggressive tumours in interval cancers: larger tumour size, nodal invasion, grade 3 tumours, and hormone receptor negative phenotype (p<0.05). The analysis of tumour characteristics versus breast density in screen-detected cancers showed higher numbers of aggressive grade 3 tumours in low-density breasts and of the luminal A subtype with good prognosis in high-density breasts (p<0.05). This analysis for interval cancers highlights a high proportion of the difficult-to-treat triple-negative subtype in low-density breasts compared with high-density breasts. In conclusion, the study data support arguments against changes in breast cancer screening programmes with prolongation of screening intervals in low-density breasts.

Characterizing Scatter Correction Software of 5 Mobile Radiography Units: An Anthropomorphic Phantom Study.

OBJECTIVES: Bedside radiographs are usually obtained gridless, without a physical scatter correction grid because of several limitations. Therefore, multiple manufacturers of mobile radiography systems provide the possibility to apply scatter correction software (SC SW) on those images. The purpose of this study was to characterize different series of radiographs-gridless, SC SW, and physical grid-with an image quality assessment algorithm (IQAA). Furthermore, we investigated the potential dose reduction and the correlation between the output of the IQAA and the human observers. MATERIALS AND METHODS: We obtained different series of radiographs with an anthropomorphic phantom (multipurpose chest phantom N1 "Lungman," Kyoto Kagaku, Kyoto, Japan). All radiographs were obtained with flat-panel detectors of 5 different manufacturers in a wall bucky system. An IQAA to analyze the radiographs was implemented in our department but was originally developed by the research group of the Duke University Medical Center. Seven physical quantities were calculated by the IQAA: rib-lung contrast (RLcontrast), subdiaphragm-lung contrast (SLcontrast), lung detail (Ldetail), mediastinum detail (Mdetail), lung noise (Lnoise), mediastinum noise (Mnoise), and rib-lung sharpness (RLsharpness). In a proof of concept, the results of the IQAA were validated by 3 experienced radiologists. RESULTS: Regression coefficients (b) of the linear regression model indicate that the human observer results correlate well with the IQAA (b ≥ 0.89, R2 ≥ 0.83). All manufacturers have SC SW that increases the 7 physical quantities of the gridless images. However, several manufacturers have SC SW that increases the physical metrics to the same level as the physical grid images. The SC SW radiographs obtained with a reduced tube load have an increased level of contrast, detail, sharpness, and noise compared with the gridless images obtained with the higher tube load. CONCLUSIONS: We have proven in a proof of concept that the originally developed IQAA can be used to characterize different series of images of different manufacturers. Based on the physical quantities, SC SW increases the contrast, detail, sharpness, and noise. The experimental results in this study assume a patient dose reduction could be possible when SC SW is applied.

Evaluation of a no-reference image quality metric for projection X-ray imaging using a 3D printed patient-specific phantom.

PURPOSE: Feasability of a no-reference image quality metric was assessed on patient-like images using a patient-specific phantom simulating a frame of a coronary angiogram. METHODS: One background and one contrast-filled frame of a coronary angiogram, acquired using a clinical imaging protocol, were selected from a Philips Integris Allura FD (Philips Healthcare, Best, The Netherlands). The background frame's pixels were extruded to a thickness proportional to their grey value. One phantom was 3D printed using composite 80% bronze filament (max. thickness of 5.1 mm), the other was a custom PMMA cast (max thickness of 8.5 cm). A vessel mold was created from the contrast-filled frame and injected with a solution of 320 mg I/ml contrast fluid (75%), water and gelatin. Still X-ray frames of the vessel mold + background phantom + 16 cm PMMA were acquired at manually selected different exposure settings using a Philips Azurion (Philips Healthcare, Best, The Netherlands) in User Quality Control Mode and were exported as RAW images. The signal-difference-to-noise-ratio-squared (SDNR2) and a spatial-domain-equivalent of the noise equivalent quanta (NEQSDE) were calculated. The Spearman's correlation of the latter parameters with a no-reference perceptual image quality metric (NIQE) was investigated. RESULTS: The bronze phantom showed better resemblance to the original patient frame selected from a coronary angiogram of an actual patient, with better contrast and less blur than the PMMA phantom. Both phantoms were imaged using a comparable imaging protocol to the one used to acquire the original frame. The bronze phantom was hence used together with the vessel mold for image quality measurements on the 165 still phantom frames. A strong correlation was noted between NEQSDE and NIQE (SROCC = -0.99, p < 0.0005) and between SDNR2 and NIQE (SROCC = -0.97, p < 0.0005). CONCLUSION: Using a cost-effective and easy to realize patient-specific phantom we were able to generate patient-like X-ray frames. NIQE as a no-reference image quality model has the potential to predict physical image quality from patient images.