Highly Active and Stable Ni/La-Doped Ceria Material for Catalytic CO2 Reduction by Reverse Water-Gas Shift Reaction.

The design of an active, effective, and economically viable catalyst for CO2 conversion into value-added products is crucial in the fight against global warming and energy demand. We have developed very efficient catalysts for reverse water-gas shift (rWGS) reaction. Specific conditions of the synthesis by combustion allow the obtention of macroporous materials based on nanosized Ni particles supported on a mixed oxide of high purity and crystallinity. Here, we show that Ni/La-doped CeO2 catalysts─with the "right" Ni and La proportions─have an unprecedented catalytic performance per unit mass of catalyst for the rWGS reaction as the first step toward CO2 valorization. Correlations between physicochemical properties and catalytic activity, obtained using a combination of different techniques such as X-ray and neutron powder diffraction, Raman spectroscopy, in situ near ambient pressure X-ray photoelectron spectroscopy, electron microscopy, and catalytic testing, point out to optimum values for the Ni loading and the La proportion. Density functional theory calculations of elementary steps of the reaction on model Ni/ceria catalysts aid toward the microscopic understanding of the nature of the active sites. This finding offers a fundamental basis for developing economical catalysts that can be effectively used for CO2 reduction with hydrogen. A catalyst based on Ni0.07/(Ce0.9La0.1Ox)0.93 shows a CO production of 58 × 10-5 molCO·gcat-1·s-1 (700 °C, H2/CO2 = 2; selectivity to CO > 99.5), being stable for 100 h under continuous reaction.

Biocide mechanism of highly efficient and stable antimicrobial surfaces based on zinc oxide-reduced graphene oxide photocatalytic coatings.

Highly efficient photoactive antimicrobial coatings were obtained using zinc oxide-reduced graphene oxide nanocomposites (ZnO-rGO). Their remarkable antibacterial activity and high stability demonstrated their potential use for photoactive biocide surfaces. The ZnO-rGO nanocomposites were prepared by the sol-gel technique to create photocatalytic surfaces by spin-coating. The coatings were deeply characterised and several tests were performed to assess the antibacterial mechanisms. rGO was homogeneously distributed as thin sheets decorated with ZnO nanoparticles. The surface roughness and the hydrophobicity increased with the incorporation of graphene. The ZnO-rGO coatings exhibited high activity against the Gram-positive bacterium Staphylococcus aureus. The 1 wt% rGO coated surfaces showed the highest antibacterial effect in only a few minutes of illumination with up to 5-log reduction in colony forming units, which remained essentially free of bacterial colonization and biofilm formation. We demonstrated that these coatings impaired the bacterial cells due to cell membrane damage and intracellular oxidative stress produced by the photogenerated reactive-oxygen species (ROS). The enhancement of the ZnO photocatalytic performance upon rGO incorporation is due to the increased detected generation of hydroxyl radicals, attributed to the reduction of electron-hole pair recombination. This intimate contact between both components also conveyed stability against zinc leaching and improved the coating adhesion.

Correction: Multifunctional mixed valence N-doped CNT@MFe2O4 hybrid nanomaterials: from engineered one-pot coprecipitation to application in energy storage paper supercapacitors.

Correction for 'Multifunctional mixed valence N-doped CNT@MFe2O4 hybrid nanomaterials: from engineered one-pot coprecipitation to application in energy storage paper supercapacitors' by Clara Pereira et al., Nanoscale, 2018, 10, 12820-12840.

Multifunctional mixed valence N-doped CNT@MFe2O4 hybrid nanomaterials: from engineered one-pot coprecipitation to application in energy storage paper supercapacitors.

This work reports on the design of novel mixed valence hybrid N-doped carbon nanotubes/metal ferrite nanomaterials (MFe2O4, M(ii) = Mn, Fe, Co) with tailored composition, and magnetic and electrical properties through a straightforward eco-sustainable and less time consuming one-pot in situ coprecipitation process. The potentialities of this strategy rely on the lack of oxidative treatments to the support and thermal annealing, besides the use of aqueous conditions, a chelating base (isopropanolamine) and low temperatures. The process afforded the controlled nucleation/growth of the MFe2O4 nanoparticles (NPs), with sizes of 3.2-5.4 nm and superparamagnetic properties, on the surface of the N-doped carbon nanotubes (CNT-N) and their immobilization by covalent bonding. The nitrogen-based functionalities of CNT-N allied with the use of a coprecipitation agent with coordinating properties towards M(ii)/Fe(iii) cations were responsible for these achievements. To unravel the potentialities of the novel nanohybrids (CNT-N@M), they were tested as electrode active nanomaterials in the fabrication of all-solid-state asymmetric paper supercapacitors (SCs). All asymmetric SCs presented significantly higher performance than the symmetric CNT-N based one, with an enhancement of the energy density to up to 6.0× and of the power density to up to 4.3× due to the occurrence of both non-faradaic and faradaic charge storage mechanisms. Moreover, they led to enhanced volumetric energy density (up to 11.1×) and power density (up to 5.2×) compared with other solid-state hybrid paper SCs based on carbon materials recently reported in the literature. These results highlight the importance of conjugating a conductive support bearing N-based functionalities with MFe2O4 NPs featuring redox properties towards synergistically enhanced energy storage.

Polyoxotungstate@Carbon Nanocomposites As Oxygen Reduction Reaction (ORR) Electrocatalysts.

The oxygen reduction reaction (ORR) has a crucial function as the cathode reaction in energy-converting systems, such as fuel cells (FCs), which contributes to a sustainable energy supply. However, the current use of precious Pt-based electrocatalysts (ECs) is a major drawback for the economic viability of fuel cells. Hence, it is urgent to develop cost-effective and efficient electrocatalysts (ECs) without noble metals to substitute the Pt-based ECs. Herein, we report the preparation and application as ORR electrocatalysts of four new nanocomposites based on sandwich-type phosphotungstate (TBA)7H3[Co4(H2O)2(PW9O34)2] (TBA-Co4(PW9)2) immobilized onto different carbon nanomaterials [single-walled carbon nanotubes (SWCNT), graphene flakes (GF), carbon nanotubes doped with nitrogen (N-CNT), and nitrogen-doped few layer graphene (N-FLG)]. In alkaline medium, the four nanocomposites studied presented comparable onset potentials (0.77-0.90 V vs RHE), which are similar to that observed for Pt/C (0.91 V vs RHE). Higher diffusion-limiting current densities ( jL,0.26V,1600 rpm = -168.3 mA cm-2 mg-1) were obtained for Co4(PW9)2@N-CNT, as compared to Pt/C electrode -130.0 mA cm-2 mg-1) and the other ECs (-45.0, -50.7, and -87.5 mA cm-2 mg-1 for Co4(PW9)2@SWCNT, Co4(PW9)2@GF, and Co4(PW9)2@N-FLG, respectively). All the Co4(PW9)2@CM ECs showed selectivity toward direct O2 reduction to water with the exception of Co4(PW9)2@GF where a mixture of the 2- and 4-electron mechanisms is observed. Furthermore, low Tafel slopes were obtained for all the nanocomposites (68-96 mV dec-1). Co4(PW9)2@CM ECs also showed excellent tolerance to methanol with no significant changes in current density, in contrast to Pt/C (decrease of ≈59% after methanol addition) and good long-term electrochemical stability with current retentions between 75 and 84%.

Novel electrochemical sensor based on N-doped carbon nanotubes and Fe3O4 nanoparticles: simultaneous voltammetric determination of ascorbic acid, dopamine and uric acid.

A new modified electrode based on N-doped carbon nanotubes functionalized with Fe3O4 nanoparticles (Fe3O4@CNT-N) has been prepared and applied on the simultaneous electrochemical determination of small biomolecules such as dopamine (DA), uric acid (UA) and ascorbic acid (AA) using voltammetric methods. The unique properties of CNT-N and Fe3O4 nanoparticles individually and the synergetic effect between them led to an improved electrocatalytic activity toward the oxidation of AA, DA and UA. The overlapping anodic peaks of these three biomolecules could be resolved from each other due to their lower oxidation potentials and enhanced oxidation currents when using the Fe3O4@CNT-N modified electrode. The linear response ranges for the square wave voltammetric determination of AA, DA and UA were 5-235, 2.5-65 and 2.5-85µmoldm(-3) with detection limit (S/N=3) of 0.24, 0.050 and 0.047µmoldm(-3), respectively. These results show that Fe3O4@CNT-N nanocomposite is a promising candidate of cutting-edge electrode materials for electrocatalytic applications.