Distinct Contact Scaling Effects in MoS2 Transistors Revealed with Asymmetrical Contact Measurements.

2D semiconducting materials have immense potential for future electronics due to their atomically thin nature, which enables better scalability. While the channel scalability of 2D materials has been extensively studied, the current understanding of contact scaling in 2D devices is inconsistent and oversimplified. Here physically scaled contacts and asymmetrical contact measurements (ACMs) are combined to investigate the contact scaling behavior in 2D field-effect transistors. The ACMs directly compare electron injection at different contact lengths while using the exact same MoS2  channel, eliminating channel-to-channel variations. The results show that scaled source contacts can limit the drain current, whereas scaled drain contacts do not. Compared to devices with long contact lengths, devices with short contact lengths (scaled contacts) exhibit larger variations, 15% lower drain currents at high drain-source voltages, and a higher chance of early saturation and negative differential resistance. Quantum transport simulations reveal that the transfer length of Ni-MoS2  contacts can be as short as 5 nm. Furthermore, it is clearly identified that the actual transfer length depends on the quality of the metal-2D interface. The ACMs demonstrated here will enable further understanding of contact scaling behavior at various interfaces.

Influence of the hBN Dielectric Layers on the Quantum Transport Properties of MoS2 Transistors.

The encapsulation of single-layer 2D materials within hBN has been shown to improve the mobility of these compounds. Nevertheless, the interplay between the semiconductor channel and the surrounding dielectrics is not yet fully understood, especially their electron-phonon interactions. Therefore, here, we present an ab initio study of the coupled electrons and phonon transport properties of MoS2-hBN devices. The characteristics of two transistor configurations are compared to each other: one where hBN is treated as a perfectly insulating, non-vibrating layer and one where it is included in the ab initio domain as MoS2. In both cases, a reduction of the ON-state current by about 50% is observed as compared to the quasi-ballistic limit. Despite the similarity in the current magnitude, explicitly accounting for hBN leads to additional electron-phonon interactions at frequencies corresponding to the breathing mode of the MoS2-hBN system. Moreover, the presence of an hBN layer around the 2D semiconductor affects the Joule-induced temperature distribution within the transistor.