Neotropical cloud forests and páramo to contract and dry from declines in cloud immersion and frost.

Clouds persistently engulf many tropical mountains at elevations cool enough for clouds to form, creating isolated areas with frequent fog and mist. Under these isolated conditions, thousands of unique species have evolved in what are known as tropical montane cloud forests (TMCF) and páramo. Páramo comprises a set of alpine ecosystems that occur above TMCF from about 11° N to 9° S along the Americas continental divide. TMCF occur on all continents and island chains with tropical climates and mountains and are increasingly threatened by climate and land-use change. Climate change could impact a primary feature distinguishing these ecosystems, cloud immersion. But where and in what direction cloud immersion of TMCF and páramo will change with climate are fundamental unknowns. Prior studies at a few TMCF sites suggest that cloud immersion will increase in some places while declining in others. Other unknowns include the extent of deforestation in protected and unprotected cloud forest climatic zones, and deforestation extent compared with projected climate change. Here we use a new empirical approach combining relative humidity, frost, and novel application of maximum watershed elevation to project change in TMCF and páramo for Representative greenhouse gas emissions Concentration Pathways (RCPs) 4.5 and 8.5. Results suggest that in <25-45 yr, 70-86% of páramo will dry or be subject to tree invasion, and cloud immersion declines will shrink or dry 57-80% of Neotropical TMCF, including 100% of TMCF across Mexico, Central America, the Caribbean, much of Northern South America, and parts of Southeast Brazil. These estimates rise to 86% of Neotropical TMCF and 98% of páramo in <45-65 yr if greenhouse gas emissions continue rising throughout the 21st century. We also find that TMCF zones are largely forested, but some of the most deforested areas will undergo the least climate change. We project that cloud immersion will increase for only about 1% of all TMCF and in only a few places. Declines in cloud immersion dominate TMCF change across the Neotropics.

3-Methylcyclohex-2-en-1-one for area and individual tree protection against spruce beetle (Coleoptera: Curculionidae: Scolytinae) attack in the southern Rocky Mountains.

We tested 3-methylcyclohex-2-en-1-one (MCH) and an Acer kairomone blend (AKB) as repellent semiochemicals for area and single tree protection to prevent spruce beetle (Dendroctonus rufipennis Kirby) attacks at locations in Utah and New Mexico. In the area protection study, we compared host infestation rates of MCH applications at three densities (20, 40, and 80 g MCH ha-1) against a control treatment over 0.64 ha plots centered within ~1.25 ha treatment blocks. All treatments included two baited funnel traps within the plot to assure spruce beetle pressure. Following beetle attack, plots were surveyed for new spruce beetle attacks and to quantify stand characteristics. The probability of more severe spruce beetle attacks was significantly reduced, by ~50%, in each of the MCH area treatments compared with the control treatment but there was no significant treatment difference among the MCH deployment densities. For the single tree protection study, we compared attack rates of MCH, Acer kairomone blend (AKB), and MCH plus AKB on spruce beetle-baited trees against bait-only trees. Each treatment was applied over a range of host diameters to test for host size effects. Seventy-five percent of control trees were mass-attacked, about one-third of MCH- and AKB-alone spruce was mass-attacked, and no MCH plus AKB spruce were mass-attacked. These results suggest that MCH alone is a marginal area and single tree protectant against spruce beetle but that deployment with other repellents can significantly increase treatment efficacy.

Non-structural carbohydrates in woody plants compared among laboratories.

Non-structural carbohydrates (NSC) in plant tissue are frequently quantified to make inferences about plant responses to environmental conditions. Laboratories publishing estimates of NSC of woody plants use many different methods to evaluate NSC. We asked whether NSC estimates in the recent literature could be quantitatively compared among studies. We also asked whether any differences among laboratories were related to the extraction and quantification methods used to determine starch and sugar concentrations. These questions were addressed by sending sub-samples collected from five woody plant tissues, which varied in NSC content and chemical composition, to 29 laboratories. Each laboratory analyzed the samples with their laboratory-specific protocols, based on recent publications, to determine concentrations of soluble sugars, starch and their sum, total NSC. Laboratory estimates differed substantially for all samples. For example, estimates for Eucalyptus globulus leaves (EGL) varied from 23 to 116 (mean = 56) mg g(-1) for soluble sugars, 6-533 (mean = 94) mg g(-1) for starch and 53-649 (mean = 153) mg g(-1) for total NSC. Mixed model analysis of variance showed that much of the variability among laboratories was unrelated to the categories we used for extraction and quantification methods (method category R(2) = 0.05-0.12 for soluble sugars, 0.10-0.33 for starch and 0.01-0.09 for total NSC). For EGL, the difference between the highest and lowest least squares means for categories in the mixed model analysis was 33 mg g(-1) for total NSC, compared with the range of laboratory estimates of 596 mg g(-1). Laboratories were reasonably consistent in their ranks of estimates among tissues for starch (r = 0.41-0.91), but less so for total NSC (r = 0.45-0.84) and soluble sugars (r = 0.11-0.83). Our results show that NSC estimates for woody plant tissues cannot be compared among laboratories. The relative changes in NSC between treatments measured within a laboratory may be comparable within and between laboratories, especially for starch. To obtain comparable NSC estimates, we suggest that users can either adopt the reference method given in this publication, or report estimates for a portion of samples using the reference method, and report estimates for a standard reference material. Researchers interested in NSC estimates should work to identify and adopt standard methods.

Hyaluronan turnover and hypoxic brown adipocytic differentiation are co-localized with ossification in calcified human aortic valves.

The calcification process in aortic stenosis has garnered considerable interest but only limited investigation into selected signaling pathways. This study investigated mechanisms related to hypoxia, hyaluronan homeostasis, brown adipocytic differentiation, and ossification within calcified valves. Surgically explanted calcified aortic valves (n=14) were immunostained for markers relevant to these mechanisms and evaluated in the center (NodCtr) and edge (NodEdge) of the calcified nodule (NodCtr), tissue directly surrounding nodule (NodSurr); center and tissue surrounding small "prenodules" (PreNod, PreNodSurr); and normal fibrosa layer (CollFibr). Pearson correlations were determined between staining intensities of markers within regions. Ossification markers primarily localized to NodCtr and NodEdge, along with markers related to hyaluronan turnover and hypoxia. Markers of brown adipocytic differentiation were frequently co-localized with markers of hypoxia. In NodCtr and NodSurr, brown fat and ossification markers correlated with hyaluronidase-1, whereas these markers, as well as hypoxia, correlated with hyaluronan synthases in NodEdge. The protein product of tumor necrosis factor-α stimulated gene-6 strongly correlated with ossification markers and hyaluronidase in the regions surrounding the nodules (NodSurr, PreNodSurr). In conclusion, this study suggests roles for hyaluronan homeostasis and the promotion of hypoxia by cells demonstrating brown fat markers in calcific aortic valve disease.

Peg Restrained Intrinsic Muscle Evaluator (PRIME): development, reliability, and normative values of a device to quantify intrinsic hand muscle strength in children.

PURPOSE: There is a need for objective measures of pediatric intrinsic hand muscle strength as the current standard, the manual muscle test, lacks sensitivity to clinically important changes in muscle strength. We report the development, reliability, and normative values of the Peg Restrained Intrinsic Muscle Evaluator (PRIME), a device that quantifies intrinsic hand muscle strength. METHODS: Typically developing children, ages 4 to 16 years (n = 119), established normative values of intrinsic strength for thumb palmar abduction, thumb opposition, and index and small finger abduction. A subset of 30 children (15 boys, 15 girls), ages 7 to 16 years, determined inter-rater and intra-rater reliability. We calculated mean, standard deviation, intraclass correlation coefficients, and smallest detectable differences. RESULTS: Normative results indicate that gender and age were significant predictors of strength. Although the dominant hand generated higher strength measurements on average, differences were not statistically significant. Mean index and small finger abduction strength was significantly lower than thumb abduction and opposition in both genders. Intraclass correlation coefficients ranged from 0.85 to 0.94 for inter-rater reliability and 0.88 to 0.98 for intra-rater reliability. Bland-Altman plots showed an even distribution across the zero line. CONCLUSIONS: The PRIME device is a reliable tool for the quantification of intrinsic hand muscle strength in children. Age-specific and gender-specific normative values in typically developing children can serve as a future resource for clinicians treating pediatric hand or neuromuscular conditions.

Delivery of plasmid DNA encoding bone morphogenetic protein-2 with a biodegradable branched polycationic polymer in a critical-size rat cranial defect model.

This study investigated the delivery of plasmid DNA (pDNA) encoding bone morphogenetic protein-2 in the form of polyplexes with a biodegradable branched triacrylate/amine polycationic polymer (TAPP) that were complexed with gelatin microparticles (GMPs) loaded within a porous tissue engineering scaffold. More specifically, the study investigated the interplay between TAPP degradation, gelatin degradation, pDNA release, and bone formation in a critical-size rat cranial defect model. The pDNA release kinetics in vitro were not affected by the crosslinking density of the GMPs but depended, rather, on the degradation rates of the TAPPs. Besides the initial release of polyplexes not bound to the GMPs and the minimal release of polyplexes through diffusion or dissociation from the GMPs, the pDNA was likely released as naked pDNA or as part of an incomplete polyplex, after the degradation of fragments of the polycationic polymer. After 30 days, significantly higher amounts of pDNA were released (93%-98%) from composite scaffolds containing naked pDNA or pDNA complexed with P-AEPZ (synthesized with 1-[2-aminoethyl]piperazine, a faster degrading TAPP) compared with those containing pDNA complexed with P-DED (synthesized with N,N-dimethylethylenediamine, a slower degrading TAPP) (74%-82%). Composite scaffolds containing GMPs complexed with TAPP/pDNA polyplexes did not result in enhanced bone formation, as analyzed by microcomputed tomography and histology, in a critical-size rat cranial defect at 12 weeks postimplantation compared with those loaded with naked pDNA. The results demonstrate that polycationic polymers with a slow degradation rate can prolong the release of pDNA from the composite scaffolds and suggest that a gene delivery system comprising biodegradable polycationic polymers should be designed to release the pDNA in an intact polyplex form.

Differential proteoglycan and hyaluronan distribution in calcified aortic valves.

BACKGROUND: While the prevalence of calcified aortic valve disease continues to rise and no pharmacological treatments exist, little is known regarding the pathogenesis of the disease. Proteoglycans and the glycosaminoglycan hyaluronan are involved in calcification in arteriosclerosis and their characterization in calcified aortic valves may lend insight into the pathogenesis of the disease. METHODS: Fourteen calcified aortic valves removed during valve replacement surgery were immunohistochemically stained for the proteoglycans decorin, biglycan, and versican, as well as the glycosaminoglycan hyaluronan. Staining intensity was evaluated in the following regions of interest: center of calcified nodule, edge of nodule, tissue directly surrounding the nodule; center and tissue surrounding small "prenodules"; and fibrosa layer of normal regions of the leaflet distanced from the nodule. RESULTS: Decorin, biglycan, and versican, as well as hyaluronan, were abundantly present immediately surrounding the calcified nodules, but minimally within the nodule itself. Expression of decorin and biglycan in and surrounding prenodules was greater than in the edge and center regions of mature nodules. The levels of expression of the proteoglycans and hyaluronan were highly correlated with one another in the different regions of the valve. CONCLUSIONS: The three proteoglycans and hyaluronan demonstrated distinctive localization relative to nodules within calcified aortic valves, where they likely mediate lipid retention, cell proliferation, and extracellular matrix remodeling, and motivate further study. Comparisons between expression of these components in mature nodules and prenodules suggest distinct roles for these components in nodule progression, especially in the tissues surrounding the nodules.

Repair of osteochondral defects with biodegradable hydrogel composites encapsulating marrow mesenchymal stem cells in a rabbit model.

This work investigated the delivery of marrow mesenchymal stem cells (MSCs), with or without the growth factor transforming growth factor-beta1 (TGF-beta1), from biodegradable hydrogel composites on the repair of osteochondral defects in a rabbit model. Three formulations of oligo(poly(ethylene glycol) fumarate) (OPF) hydrogel composites containing gelatin microparticles (GMPs) and MSCs were implanted in osteochondral defects, including (i) OPF/GMP hydrogel composites; (ii) OPF/GMP hydrogel composites encapsulating MSCs; and (iii) OPF hydrogel composites containing TGF-beta1-loaded GMPs and MSCs. At 12weeks, the quality of new tissue formed in chondral and subchondral regions of defects was evaluated based on subjective and quantitative histological analysis. OPF hydrogel composites were partially degraded and the defects were filled with newly formed tissue at 12weeks with no sign of persistent inflammation. With the implantation of scaffolds alone, newly formed chondral tissue had an appearance of hyaline cartilage with zonal organization and intense staining for glycosaminoglycans, while in the subchondral region hypertrophic cartilage with some extent of bone formation was often observed. The addition of MSCs, especially with TGF-beta1-loaded GMPs, facilitated subchondral bone formation, as evidenced by more trabecular bone appearance. However, the delivery of MSCs with or without TGF-beta1 at the dosage investigated did not improve cartilage morphology. While OPF-based hydrogel composites supported osteochondral tissue generation, further investigations are necessary to elucidate the effects of MSC seeding density and differentiation stage on new tissue formation and regeneration.

Regulated non-viral gene delivery from coaxial electrospun fiber mesh scaffolds.

In an effort to add to the versatility of three-dimensional scaffolds for tissue engineering applications, recent experimental designs are incorporating biological molecules such as plasmids and proteins within the scaffold structure. Such scaffolds act as reservoirs for the biological molecules of interest while regulating their release over various durations of time. Here, we describe the use of coaxial electrospinning as a means for the fabrication of fiber mesh scaffolds and the encapsulation and subsequent release of a non-viral gene delivery vector over a period of up to 60 days. Various fiber mesh scaffolds containing plasmid DNA (pDNA) within the core and the non-viral gene delivery vector poly(ethylenimine)-hyaluronic acid (PEI-HA) within the sheath of coaxial fibers were fabricated based on a fractional factorial design that investigated the effects of four processing parameters at two levels. Poly(epsilon-caprolactone) sheath polymer concentration, poly(ethylene glycol) core polymer molecular weight and concentration, and the concentration of pDNA were investigated for their effects on average fiber diameter, release kinetics of PEI-HA, and transfection efficiency. It was determined that increasing the values of each of the investigated parameters caused an increase in the average diameter of the fibers. The release kinetics of PEI-HA from the fibers were affected by the loading concentration of pDNA (with PEI-HA concentration adjusted accordingly to maintain a constant nitrogen to phosphorous (N:P) ratio within the complexes). Two-dimensional cell culture experiments with model fibroblast-like cells demonstrated that complexes of pDNA with PEI-HA released from fiber mesh scaffolds could successfully transfect cells and induce expression of enhanced green fluorescent protein (EGFP). Peak EGFP expression varied with the investigated processing parameters, and the average transfection observed was a function of poly(ethylene glycol) (core) molecular weight and concentration. Furthermore, fibroblast-like cells seeded directly onto coaxial fiber mesh scaffolds containing PEI-HA and pDNA showed EGFP expression over 60 days, which was significantly greater than the EGFP expression observed with scaffolds containing pDNA alone. Hence, variable transfection activity can be achieved over extended periods of time upon release of pDNA and non-viral gene delivery vectors from electrospun coaxial fiber mesh scaffolds, with release and subsequent transfection controlled by tunable coaxial fiber mesh fabrication parameters.

Significant changes in mitral valve leaflet matrix composition and turnover with tachycardia-induced cardiomyopathy.

BACKGROUND: Dilated cardiomyopathy (DCM) involves significant remodeling of the left ventricular-mitral valve (MV) complex, but little is known regarding the remodeling of the mitral leaflets. The aim of this study was to assess changes in matrix composition and turnover in MV leaflets with DCM. METHODS AND RESULTS: Radiopaque markers were implanted in 24 sheep to delineate the MV; 10 sheep underwent tachycardia-induced cardiomyopathy (TIC), whereas 14 sheep remained as controls. Biplane videofluoroscopy was performed before and after TIC. Immunohistochemistry was performed on leaflet cross-sections taken from the septal, lateral, anterior, and posterior commissures attachment segments. Staining intensity was quantified within each attachment segment and leaflet region (basal, mid-leaflet, and free edge). Mitral regurgitation increased from 0.2+/-0.4 before TIC to 2.2+/-0.9 after TIC (P<0.0002). TIC leaflets demonstrated significant remodeling compared to controls, including greater cell density and loss of leaflet layered structure (all P<0.05). Collagen and elastic fiber turnover was greater in TIC, as was the myofibroblast phenotype (all P<0.05). Compositional differences between TIC and control leaflets were heterogeneous by annular segment and leaflet region, and related to regional changes in leaflet segment length with TIC. CONCLUSIONS: This study shows that the MV leaflets are significantly remodeled in DCM with changes in leaflet composition, structure, and valve cell phenotype. Understanding how alterations in leaflet mechanics, such as those induced by DCM, drive cell-mediated remodeling of the extracellular matrix will be important in developing future treatment strategies.

Dose effect of dual delivery of vascular endothelial growth factor and bone morphogenetic protein-2 on bone regeneration in a rat critical-size defect model.

The dose effect of dual delivery of vascular endothelial growth factor (VEGF) and bone morphogenetic protein-2 (BMP-2) on bone regeneration was investigated in a rat cranial critical-size defect (CSD). It was hypothesized that decreasing amounts of BMP-2 would result in a dose-dependent decrease in bone formation, and that this reduction in bone formation could be reversed by adding increasing amounts of VEGF. In vitro release kinetics of VEGF or BMP-2 were examined over 28 days. Next, scaffolds were implanted within a rat cranial CSD containing different combinations of both BMP-2 and VEGF. At 12 weeks, samples were analyzed using microcomputed tomography and histology. In vitro, VEGF and BMP-2 exhibited burst release in the first 24 h followed by a significant decrease in release rate over 27 days. Overall, BMP-2 had a more sustained release versus VEGF. An in vivo dose-dependent decrease in percentage of bone fill (PBF) was observed for BMP-2. The addition of VEGF was unable to reverse this decrease in PBF, although improvements in the number of bridged defects did occur in some groups. This suggests that for this particular model simultaneous release of BMP-2 and VEGF does not increase bone formation over BMP-2 alone at 12 weeks.

Fabrication of nonwoven coaxial fiber meshes by electrospinning.

There is a great need for biodegradable polymer scaffolds that can regulate the delivery of bioactive factors such as drugs, plasmids, and proteins. Coaxial electrospinning is a novel technique that is currently being explored to create such polymer scaffolds by embedding within them aqueous-based biological molecules. In this study, we evaluated the influence of various processing parameters such as sheath polymer concentration, core polymer concentration and molecular weight, and salt ions within the core polymer on coaxial fiber morphology. The sheath polymer used in this study was poly(e-caprolactone) (PCL), and the core polymer was poly(ethylene glycol) (PEG). We examined the effects of the various processing parameters on core diameters, total fiber diameters, and sheath thicknesses of coaxial microfibers using a 2(4) full factorial statistical model. The maximum increase in total fiber diameter was observed with increase in sheath polymer (PCL) concentration from 9 to 11 wt% (0.49+/-0.03 microm) and salt concentration within the core from 0 to 500 mM (0.38+/-0.03 microm). The core fiber diameter was most influenced by the sheath and core polymer (PCL and PEG, respectively) concentrations, the latter of which increased from 200 to 400 mg/mL (0.40+/-0.01 microm and 0.36+/-0.01 microm, respectively). The core polymer (PEG) concentration had a maximal negative effect on sheath thickness (0.40+/-0.03 microm), while salt concentration had the maximal positive effect (0.28+/-0.03 microm). Molecular weight increases in core polymer (PEG) from 1.0 to 4.6 kDa caused moderate increases in total and sheath fiber diameters and sheath thicknesses. These experiments provide important information that lays the foundation required for the synthesis of coaxial fibers with tunable dimensions.

Donor age and cell passage affects differentiation potential of murine bone marrow-derived stem cells.

BACKGROUND: Bone marrow-derived mesenchymal stem cells (BMSCs) are a widely researched adult stem cell population capable of differentiation into various lineages. Because many promising applications of tissue engineering require cell expansion following harvest and involve the treatment of diseases and conditions found in an aging population, the effect of donor age and ex vivo handling must be understood in order to develop clinical techniques and therapeutics based on these cells. Furthermore, there currently exists little understanding as to how these two factors may be influenced by one another. RESULTS: Differences in the adipogenic, chondrogenic, and osteogenic differentiation capacity of murine MSCs harvested from donor animals of different age and number of passages of these cells were observed. Cells from younger donors adhered to tissue culture polystyrene better and proliferated in greater number than those from older animals. Chondrogenic and osteogenic potential decreased with age for each group, and adipogenic differentiation decreased only in cells from the oldest donors. Significant decreases in differentiation potentials due to passage were observed as well for osteogenesis of BMSCs from the youngest donors and chondrogenesis of the cells from the oldest donors. CONCLUSION: Both increasing age and the number of passages have lineage dependent effects on BMSC differentiation potential. Furthermore, there is an obvious interplay between donor age and cell passage that in the future must be accounted for when developing cell-based therapies for clinical use.

Microcomputed tomography characterization of neovascularization in bone tissue engineering applications.

Vasculogenesis and angiogenesis have been studied for decades using numerous in vitro and in vivo systems, fulfilling the need to elucidate the mechanisms involved in these processes and to test potential therapeutic agents that inhibit or promote neovascularization. Bone tissue engineering in particular has benefited from the application of proangiogenic strategies, considering the need for an adequate vascular supply during healing and the challenges associated with the vascularization of scaffolds implanted in vivo. Conventional methods of assessing the in vivo angiogenic response to tissue-engineered constructs tend to rely on a two-dimensional assessment of microvessel density within representative histological sections without elaboration of the true vascular tree. The introduction of microcomputed tomography (micro-CT) has recently allowed investigators to obtain a diverse range of high-resolution, three-dimensional characterization of structures, including renal, coronary, and hepatic vascular networks, as well as bone formation within healing defects. To date, few studies have utilized micro-CT to study the vascular response to an implanted tissue engineering scaffold. In this paper, conventional in vitro and in vivo models for studying angiogenesis will be discussed, followed by recent developments in the use of micro-CT for vessel imaging in bone tissue engineering research. A new study demonstrating the potential of contrast-enhanced micro-CT for the evaluation of in vivo neovascularization in bony defects is described, which offers significant potential in the evaluation of bone tissue engineering constructs.

Development and characterization of a rabbit alveolar bone nonhealing defect model.

The aim of this study was to develop an easily accessible and reproducible, nonhealing alveolar bone defect in the rabbit mandible. Twenty-four adult male New Zealand white rabbits underwent unilateral mandibular defect surgery. Two types of defect in the premolar/molar region were compared: (1) a 10-mm "full thickness" cylindrical defect removing both cortical plates and the intervening trabecular bone and tooth roots; (2) a 10-mm "partial thickness" cylindrical defect removing only the lateral bony cortex, trabecular bone, and tooth roots. Both types of defect were examined at 0, 8, and 16 weeks using histology and/or microcomputed tomography to determine the quality and quantity of bone formation. The partial thickness defect displayed significant bone fill at 8 weeks (86.9% +/- 10.8%), and complete regeneration of bony contours and bridging by 16 weeks. In contrast, the full thickness defect was never able to bridge itself and displayed no significant difference in bone regeneration between the 8-week (61.5% +/- 3.7%) and 16-week (55.1% +/- 18.5%) time points. These results indicate that a nonhealing defect can be created with a 10-mm bicortical cylindrical ostectomy placed in the premolar/molar region of the rabbit mandible, demonstrating the potential of this animal model as a test bed for mandibular biomaterials and tissue-engineering constructs.

Characterization of fibroblast morphology on bioactive surfaces using vertical scanning interferometry.

Tissue donor scarcity is a major hindrance to articular cartilage tissue engineering. Previous research shows that dermal fibroblasts express chondrocytic markers after seeding on aggrecan-coated surfaces. Since cell roundness appears to correlate with chondrocytic behavior of dermal fibroblasts, this study quantified roundness by measuring cell height and surface area-volume ratio. In addition to aggrecan as a surface coating, collagen type II and decorin, two other major extracellular matrix components of articular cartilage, were examined. Aggrecan, collagen type II, and decorin were coated onto a glass substrate using three application techniques: static drying, airbrush, and painting. Vertical scanning interferometry (VSI) is a novel technique that allows for the expedient morphological determination of single cells. Interferometry was used for the characterization of protein-coated surfaces in addition to characterizing the morphology of single dermal fibroblasts after 24 h of seeding. Fibroblast height was found to vary from 1.0 to 4.0 microm and protein coating, application technique, and seeding position were significant factors (p < 0.002). The largest cell heights were observed on aggrecan and collagen type II coated surfaces using the air brush and static applications. Additionally, variations were observed for surface area-volume ratio, ranging from 1.75 to 11.94 microm(-1) with decorin resulting in the lowest ratio, followed by collagen type II and aggrecan. This study identifies optimal coating conditions for stimulating morphology in dermal fibroblasts that is characteristic of the chondrocytic phenotype. These conditions can be employed to attempt articular cartilage regeneration and bypass difficulties due to a paucity of donor tissue.

Osteochondral repair in the rabbit model utilizing bilayered, degradable oligo(poly(ethylene glycol) fumarate) hydrogel scaffolds.

In this study, hydrogel scaffolds, based on the polymer oligo(poly(ethylene glycol) fumarate) (OPF), were implanted into osteochondral defects in the rabbit model. Scaffolds consisted of two layers-a bottom, bone forming layer and a top, cartilage forming layer. Three scaffold formulations were implanted to assess how material composition and transforming growth factor-beta1 (TGF-beta1) loading affected osteochondral repair. Critical histological evaluation and scoring of the quantity and quality of tissue in the chondral and subchondral regions of defects was performed at 4 and 14 weeks. At both time points, no evidence of prolonged inflammation was observed, and healthy tissue was seen to infiltrate the defect area. The quality of this tissue improved over time with hyaline cartilage filling the chondral region and a mixture of trabecular and compact bone filling the subchondral region at 14 weeks. A promising degree of Safranin O staining and chondrocyte organization was observed in the newly formed surface tissue, while the underlying subchondral bone was completely integrated with the surrounding bone at 14 weeks. Material composition within the bottom, bone-forming layer did not appear to affect the rate of scaffold degradation or tissue filling. However, no bone upgrowth into the chondral region was observed with any scaffold formulation. TGF-beta1 loading in the top layer of scaffolds appeared to exert some therapeutic affect on tissue quality, but further studies are necessary for scaffold optimization. Yet, the excellent tissue filling and integration resulting from osteochondral implantation of these OPF-based scaffolds demonstrates their potential in cartilage repair strategies.