Characterization of a Vision-Based Tool for the Investigation of Geometric Characteristics of Ground-Deposited Volcanic Ash.

With the support of public authorities and research institutions, volcanic ash fallout and its impact on the safety of people, infrastructure and services are addressed with the aim of defining protocols and instruments for the reliable and effective handling of related emergencies. Most of the solutions proposed in the literature on ash fallout monitoring suffer from high cost and are demanding in terms of installation and maintenance. The approach suggested in this work is based on the use of a low-cost vision embedded system and a dedicated algorithm which automatically processes acquired frames of ground-deposited volcanic ash in order to estimate the main geometric properties of each particle identified in the work area. A complete characterization of the system is presented, along with a robustness analysis of particle shapes, their orientation and their position in the inspected frame. An accuracy of ±40.2 µm (with a 3σ limit) and a resolution of 32.9 µm (in the worst case), over a framed area of 130 mm by 100 mm, were estimated; these values would fulfill the objectives of the application.

A Comparison among Different Strategies to Detect Potential Unstable Behaviors in Postural Sway.

Assistive Technology helps to assess the daily living and safety of frail people, with particular regards to the detection and prevention of falls. In this paper, a comparison is provided among different strategies to analyze postural sway, with the aim of detecting unstable postural status in standing condition as precursors of potential falls. Three approaches are considered: (i) a time-based features threshold algorithm, (ii) a time-based features Neuro-Fuzzy inference system, and (iii) a Neuro-Fuzzy inference fed by Discrete-Wavelet-Transform-based features. The analysis was performed across a wide dataset and exploited performance indexes aimed at assessing the accuracy and the reliability of predictions provided by the above-mentioned strategies. The results obtained demonstrate valuable performances of the three considered strategies in correctly distinguishing among stable and unstable postural status. However, the analysis of robustness against noisy data highlights better performance of Neuro-Fuzzy inference systems with respect to the threshold-based algorithm.

Lead-Free LiNbO3 Thick Film MEMS Kinetic Cantilever Beam Sensor/Energy Harvester.

In this paper, we present integrated lead-free energy converters based on a suitable MEMS fabrication process with an embedded layer of LiNbO3. The fabrication technology has been developed to realize micromachined self-generating transducers to convert kinetic energy into electrical energy. The process proposed presents several interesting features with the possibility of realizing smaller scale devices, integrated systems, miniaturized mechanical and electromechanical sensors, and transducers with an active layer used as the main conversion element. When the system is fabricated in the typical cantilever configuration, it can produce a peak-to-peak open-circuit output voltage of 0.208 V, due to flexural deformation, and a power density of 1.9 nW·mm-3·g-2 at resonance, with values of acceleration and frequency of 2.4 g and 4096 Hz, respectively. The electromechanical transduction capability is exploited for sensing and power generation/energy harvesting applications. Theoretical considerations, simulations, numerical analyses, and experiments are presented to show the proposed LiNbO3-based MEMS fabrication process suitability. This paper presents substantial contributions to the state-of-the-art, proposing an integral solution regarding the design, modelling, simulation, realization, and characterization of a novel transducer.

A Vision-Based Approach for the Analysis of Core Characteristics of Volcanic Ash.

Volcanic ash fall-out represents a serious hazard for air and road traffic. The forecasting models used to predict its time-space evolution require information about the core characteristics of volcanic particles, such as their granulometry. Typically, such information is gained by the spot direct observation of the ash collected at the ground or by using expensive instrumentation. In this paper, a vision-based methodology aimed at the estimation of ash granulometry is presented. A dedicated image processing paradigm was developed and implemented in LabVIEW™. The methodology was validated experimentally using digital reference images resembling different operating conditions. The outcome of the assessment procedure was very encouraging, showing an accuracy of the image processing algorithm of 1.76%.

A Low Cost Inkjet-Printed Mass Sensor Using a Frequency Readout Strategy.

The development of low-cost mass sensors is of unique interest for the scientific community due to the wide range of fields requiring these kind of devices. In this paper, a full inkjet-printed mass sensor is proposed. The device is based on a PolyEthylene Terephthalate (PET) cantilever beam (operating in its first natural frequency) where a strain-sensor and a planar coil have been realized by a low-cost InkJet Printing technology to implement the sensing and actuation strategies, respectively. The frequency readout strategy of the sensor presents several advantages, such as the intrinsic robustness against instabilities of the strain sensor, the residual stress of the cantilever beam, the target mass material, and the distance between the permanent magnet and the actuation coil (which changes as a function of the target mass values). However, the frictionless actuation mode represents another shortcoming of the sensor. The paper describes the sensor design, realization, and characterization while investigating its expected behavior by exploiting dedicate models. The working span of the device is 0-0.36 g while its resolution is in the order of 0.001 g, thus addressing a wide range of potential applications requiring very accurate mass measurements within a narrow operating range.

An Assistive Technology Solution for User Activity Monitoring Exploiting Passive RFID.

Population ageing is having a direct influence on serious health issues, including hampered mobility and physical decline. Good habits in performing physical activities, in addition to eating and drinking, are essential to improve the life quality of the elderly population. Technological solutions, aiming at increasing awareness or providing reminders to eat/drink regularly, can have a significant impact in this scenario. These solutions enable the possibility to constantly monitor deviations from users' normal behavior, thus allowing reminders to be provided to users/caregivers. In this context, this paper presents a radio-frequency identification (RFID) system to monitor user's habits, such as the use of food, beverages, and/or drugs. The device was optimized to fulfill specifications imposed by the addressed application. The approach could be extended for the monitoring of home appliances, environment exploitation, and activity rate. Advantages of the approach compared to other solutions, e.g., based on cameras, are related to the low level of invasiveness and flexibility of the adopted technology. A major contribution of this paper is related to the wide investigation of system behavior, which is aimed to define the optimal working conditions of the system, with regards to the power budget, user (antenna)-tag reading range, and the optimal inter-tag distance. To investigate the performance of the system in tag detection, experiments were performed in a scenario replicating a home environment. To achieve this aim, specificity and sensitivity indexes were computed to provide an objective evaluation of the system performance. For the case considered, if proper conditions are meet, a specificity value of 0.9 and a sensitivity value of 1 were estimated.

Polymeric Transducers: An Inkjet Printed B-Field Sensor with Resistive Readout Strategy.

Magnetic field sensors are successfully used in numerous application contexts such as position sensing, speed detection, current detection, contactless switches, vehicle detection, and electronic compasses. In this paper, an inkjet printed magnetic sensor, based on the magneto-mechanical sensing principle, is presented together with a physical model describing its physical behavior and experimental results. The main novelties of the proposed solution consist of its low cost, rapid prototyping (printing and drying time), disposability, and in the use of a commercial low-cost printer. A measurement survey has been carried out by investigating magnetic fields belonging to the range 0-27 mT and for different values of the excitation current forced in the actuation coil. Experimental results demonstrate the suitability of both the proposed sensing strategy and model developed. In particular, in the case of an excitation current of 100 mA, the device responsivity and resolution are 3700 µÎµ/T and 0.458 mT, respectively.

Analysis of a Hybrid Micro-Electro-Mechanical Sensor Based on Graphene Oxide/Polyvinyl Alcohol for Humidity Measurements.

In this paper, we present a redundant microsensor based on the bulk and etch silicononinsulator (BESOI) process for measuring relative humidity (RH), by using a grapheneoxide/polyvinylalcohol (GO/PVA) composite. The MEMS is a mechanical oscillator, composed of a proof mass with multilayer of nanomaterials (GO/PVA) and suspended by four crab-leg springs. The redundant approach realized concerns the use of different readout strategies in order to estimate the same measurand RH. This is an intriguing solution to realize a robust measurement system with multiple outputs, by using the GO/PVA as functional material. In the presence of RH variation, GO/PVA (1) changes its mass, and as consequence, a variation of the natural frequency of the integrated oscillator can be observed; and (2) varies its conductivity, which can be measured by using two integrated electrodes. The sensor was designed, analyzed and modeled; experimental results are reported here to demonstrate the effectiveness of our implementation.

Low-Cost Inkjet Printing Technology for the Rapid Prototyping of Transducers.

Recently, there has been an upsurge in efforts dedicated to developing low-cost flexible electronics by exploiting innovative materials and direct printing technologies. This interest is motivated by the need for low-cost mass-production, shapeable, and disposable devices, and the rapid prototyping of electronics and sensors. This review, following a short overview of main printing processes, reports examples of the development of flexible transducers through low-cost inkjet printing technology.

Complex behavior in driven unidirectionally coupled overdamped Duffing elements.

It is well known that overdamped unforced dynamical systems do not oscillate. However, well-designed coupling schemes, together with the appropriate choice of initial conditions, can induce oscillations (corresponding to transitions between the stable steady states of each nonlinear element) when a control parameter exceeds a threshold value. In recent publications [A. Bulsara, Phys. Rev. E 70, 036103 (2004); V. In, ibid. 72, 045104 (2005)], we demonstrated this behavior in a specific prototype system, a soft-potential mean-field description of the dynamics in a hysteretic "single-domain" ferromagnetic sample. These oscillations are now finding utility in the detection of very weak "target" magnetic signals, via their effect on the oscillation characteristics--e.g., the frequency and asymmetry of the oscillation wave forms. We explore the underlying dynamics of a related system, coupled bistable "standard quartic" dynamic elements; the system shows similarities to, but also significant differences from, our earlier work. dc as well as time-periodic target signals are considered; the latter are shown to induce complex oscillatory behavior in different regimes of the parameter space. In turn, this behavior can be harnessed to quantify the target signal.

Development of novel ferrofluidic pumps.

The development and realization of micropipettes and micropumps has captured the interest of people working in both biomedical and chemical areas for the capability of managing very low quantity of liquid (drug, biological liquid or expensive reagent) as well as everyone interested in controlling small flows for dedicated applications. In this paper a novel ferrofluidic pump adopting an electromagnetic actuation is proposed. The pump is realized by injecting three drops of ferrofluids into the pipe (two valves and a plunger are required) in the position where the pump must operate and by exploiting the forces produced onto each ferrofluid drop by some coils externally placed with respect to the pipe. The absence of any mechanical moving parts, the possibility to realize a volumetric pump in a section of an existing pipe without interruptions and deformation are the main advantages of the architecture proposed as compared to existing prototypes. A detailed description of the strategy proposed is presented along with a preliminary characterization of the prototype developed.

Emergent oscillations in unidirectionally coupled overdamped bistable systems.

It is well known that overdamped unforced dynamical systems do not oscillate. However, well-designed coupling schemes, together with the appropriate choice of initial conditions, can induce oscillations when a control parameter exceeds a threshold value. In a recent publication [Phys. Rev. E 68, 045102 (2003)]], we demonstrated this behavior in a specific prototype system, a soft-potential mean-field description of the dynamics in a hysteretic "single-domain" ferromagnetic sample. The previous analysis of this work showed that N (odd) unidirectionally coupled elements with cyclic boundary conditions would, in fact, oscillate when a control parameter-in this case the coupling strength-exceeded a critical value. These oscillations are now finding utility in the detection of very weak "target" signals, via their effect on the oscillation characteristics, e.g., the frequency and asymmetry of the oscillation wave forms. In this paper we explore the underlying dynamics of this system. Scaling laws that govern the oscillation frequency in the vicinity of the critical point, as well as the zero-crossing intervals in the presence of a symmetry-breaking target dc signal, are derived; these quantities are germane to signal detection and analysis.