Regulating Planarized Intramolecular Charge Transfer for Efficient Single-Phase White-Light Emission in Undoped Metal-Organic Framework Nanocrystals.

The technology of combining multiple emission centers to exploit white-light-emitting (WLE) materials by taking advantage of porous metal-organic frameworks (MOFs) is mature, but preparing undoped WLE MOFs remains a challenge. Herein, a pressure-treated strategy is reported to achieve efficient white photoluminescence (PL) in undoped [Zn(Tdc)(py)]n nanocrystals (NCs) at ambient conditions, where the Commission International del'Eclairage coordinates and color temperature reach (0.31, 0.37) and 6560 K, respectively. The initial [Zn(Tdc)(py)]n NCs exhibit weak-blue PL consisting of localized excited (LE) and planarized intramolecular charge transfer (PLICT) states. After pressure treatment, the emission contributions of LE and PLICT states are balanced by increasing the planarization of subunits, thereby producing white PL. Meanwhile, the reduction of nonradiative decay triggered by the planarized structure results in 5-fold PL enhancement. Phosphor-converted light-emitting diodes based on pressure-treated samples show favorable white-light characteristics. The finding provides a new platform for the development of undoped WLE MOFs.

Regulating Second Coordination Shell of Ce Atom Site and Reshaping of Carrier Enable Single-Atom Nanozyme to Efficiently Express Oxidase-like Activity.

Single-atom nanozymes (SANs) are considered to be ideal substitutes for natural enzymes due to their high atom utilization. This work reported a strategy to manipulate the second coordination shell of the Ce atom and reshape the carbon carrier to improve the oxidase-like activity of SANs. Internally, S atoms were symmetrically embedded into the second coordination layer to form a Ce-N4S2-C structure, which reduced the energy barrier for O2 reduction, promoted the electron transfer from the Ce atom to O atoms, and enhanced the interaction between the d orbital of the Ce atom and p orbital of O atoms. Externally, in situ polymerization of mussel-inspired polydopamine on the precursor helps capture metal sources and protects the 3D structure of the carrier during pyrolysis. On the other hand, polyethylene glycol (PEG) modulated the interface of the material to enhance water dispersion and mass transfer efficiency. As a proof of concept, the constructed PEG@P@Ce-N/S-C was applied to the multimodal assay of butyrylcholinesterase activity.

Theory-Guided Experimental Design of Covalent Triazine Frameworks for Efficient Photocatalytic Hydrogen Production.

The high crystalline covalent triazine framework-1 (CTF-1), composed of alternating triazine and phenylene, has emerged as an efficient photocatalyst for solar-driven hydrogen evolution reaction (HER). However, it is of great challenge to further improve photocatalytic HER performance via increasing crystallinity due to its near-perfect crystallization. Herein, an alternative strategy of scaffold functionalization is employed to optimize the energy band structure of crystalline CTF-1 for boosting hydrogen-evolving activity. Guided by the computational predictions, versatile CTF-based polymer photocatalysts are prepared with different functional groups (OH, NH2, COOH) using binary polymerization for practical hydrogen production. Experiment evidence verifies that the introduction of a limited number of electron-donating groups is sufficient to maintain high crystallinity in CTF, modulate the band structure, broaden visible light absorption, and consequently enhance its photophysical properties. Notably, the functionalization with OH exhibits the most positive effect on CTF-1, delivering a photocatalytic activity with a hydrogen-producing rate exceeding 100 µmol h-1.

MD investigation on the differences in the dynamic interactions between the specific ligand azamulin and two CYP3A isoforms, 3A4 and 3A5.

The unmarked potential drug molecule azamulin has been found to be a specific inhibitor of CYP3A4 and CYP3A5 in recent years, but this molecule also shows different binding ability and affinity to the two CYP3A isoforms. In order to explore the microscopic mechanism, conventional molecular dynamics (MD) simulation methods were performed to study the dynamic interactions between two isoforms and azamulin. The simulation results show that the binding of the ligand leads to different structural properties of two CYP3A proteins. First of all, compared with apo-CYP3A4, the binding of the ligand azamulin can lead to changes in the structural flexibility of CYP3A4, i.e., holo-CYP3A4 is more flexible than apo-CYP3A4. The structural changes of CYP3A5 are just the opposite. The ligand binding increases the rigidity of CYP3A5. Furthermore, the representative structures of the production phase in the MD simulation were in details analyzed to obtain the microscopic interactions between the ligand azamulin and two CYP3A isoforms at the atomic level. It is speculated that the difference of composition and interaction of the active sites is the fundamental cause of the change of structural properties of the two proteins.Communicated by Ramaswamy H. Sarma.

Solvent-Promoted Catalyst-Free Recycling of Waste Polyester and Polycarbonate Materials.

Polymeric materials are indispensable in our daily lives. However, the generation of vast amounts of waste polymers poses significant environmental and ecological challenges. Instead of resorting to landfilling or incineration, strategies for polymer recycling offer a promising approach to mitigate environmental pollution. Pioneering studies have demonstrated the alcoholysis of waste polyesters and polycarbonates; however, these processes typically require the use of catalysts. Moreover, the development of strategies for catalyst removal and recycling is crucial, particularly in some industrial applications. In contrast, we present a catalyst-free method for the alcoholysis of common polyester and polycarbonate materials into small organic molecules. Certain polar organic solvents exhibit remarkable efficiency in polymer degradation under catalyst-free conditions. Employing these polar solvents, both polymer resins and commercially available products could be effectively degraded via alcoholysis. Our design contributes a straightforward route for recycling waste polymeric materials.

Density Functional Calculation and Evaluation of the Spectroscopic Properties and Luminescent Material Application Potential of the N-Heterocyclic Platinum(II) Tetracarbene Complexes.

A series of reported Pt(II) carbene complexes possibly have the ability to serve as the new generation of blue emitters in luminescent devices because of their narrow emission spectra, high photoluminescence quantum yields (PLQYs), and rigid molecular skeleton. However, the combination of all carbene ligands with different multidentate structures will affect the overall planarity and horizontal dipole ratio to varying degrees, but the specific extent of this effect has not previously been analyzed in detail. In this work, density functional computation is used to study a class of platinum tetracarbene bidentate complexes with similar absorption and emission band characteristics, which is the main reason for the remarkable difference in quantum efficiency due to subtle differences in electronic states caused by different ligands. From the calculation results, the major reason, which results in significantly decrease in quantum efficiency for [Pt(cyim)2]2+, is that [Pt(cyim)2]2+ can reach the non-radiative deactivation metal-centered d-d excited state through an easier pathway compared with [Pt(meim)2]2+. The result, based on changes in the dihedral angle between ligands, can achieve the goal of improving and designing materials by adjusting the degree of the dihedral angle. (meim: bis(1,1'-dimethyl-3,3'-methylene-diimidazoline-2,2'-diylidene); cyim: bis(1,1'-dicyclohexyl-3,3'-methylene-diimidazoline-2,2'-diylidene).

Investigating the influence of substituent groups in TTM based radicals for the excitation process: a theoretical study.

Tri-(2,4,6-trichlorophenyl)methyl (TTM) based radicals can be promising in providing relatively high fluorescence quantum efficiency. In this study, we have evaluated the photoluminescence properties of a series of TTM-based radicals by means of DFT and TD-DFT methods. The optimized structures of the ground states (D0) and the first excited states (D1) of all the radicals are calculated and the computed emission bands are comparable with previous experimental results. knr is determined from transition dipole moments (µ12) and the energy gaps between D0 and D1 (ΔE), both of which can be regulated by the conjugated structures from the substituent groups. knr was derived from the mode-averaging method and is consistent with the experimental results. Factors influencing kr and knr, including the potential energy differences (ΔG0), the vibrational reorganization energies (λ) and the electron coupling term (Hab), are discussed. By comparing kr and knr in solvents with different polarities (cyclohexane, toluene, and chloroform), TTM based radicals in cyclohexane exhibit the most promising fluorescence efficiencies. Besides, two substituted radicals, namely 2Br-TTM-3PCz and 2F-TTM-3PCz, have been fabricated. The results show that fluorine atoms are able to increase ΔG0 and a considerably small knr has been predicted. We expect that our calculation can benefit the design of light-emitting molecules in further experiments.

Dynamic Metastable Characteristics of Carbon Cages Embedded with Er2C2.

Novel endohedral metallofullerenes (EMFs), namely, Er2C2@C2v(5)-C80, Er2C2@Cs(6)-C82, Er2C2@Cs(15)-C84, Er2C2@C2v(9)-C86, Er2C2@Cs(15)-C86, and Er2C2@Cs(32)-C88, had been experimentally synthesized, and the unique structures and many fascinating properties had also been widely explored. Nevertheless, the position of the Er atoms inside the cage shows a severe disorder within the stable EMF monomer, which is difficult to understand and explain from the experimental point of view. In this work, based on the density functional theoretical calculations, the Er2C2@Cs(6)-C82 has 73 directional isomers and 2 Er atoms that are far beyond from Er-Er single bonding and tend to be close to the cage side (marked as "shell"), and the core (Er2C2 units) takes on a butterfly shape as generally revealed. The energy difference between any two of the isomers is in the range of 0.05 to 25.6 kcal/mol, indicating a relatively easy thermodynamic transition between the isomers. The other five Er carbide cluster EMFs (Er2C2@C2v(5)-C80, Er2C2@Cs(15)-C84, Er2C2@C2v(9)-C86, Er2C2@Cs(15)-C86, and Er2C2@Cs(32)-C88) are also studied in the same way, and 30, 37, 39, and 43 most stable Er-oriented sites inside the cage, respectively, are obtained. In addition, the shape of the Er2C2 gradually changed from butterfly to linear. Moreover, the electronic structure and molecular orbital analyses show that it is easy for Er2C2@C80-88 to form a charge transfer state of [Er2C2]4+@[C80-88]4- via the dynamic core-shell coordination equilibrium. Er2C2 with a steep drop in chemical stability is restricted to forming varying degrees of metastable states in the shell, determined by the shell size, to ensure the overall stability. The lowest unoccupied molecular orbital energy level of these EMFs is increased by 0.5-1.1 eV compared with fullerenes C80-88, potentially providing favorable conditions for suitable energy level matching with EMF as an electron acceptor used in organic solar cell devices.

Interface Reversible Electric Field Regulated by Amphoteric Charged Protein-Based Coating Toward High-Rate and Robust Zn Anode.

Metallic interface engineering is a promising strategy to stabilize Zn anode via promoting Zn2+ uniform deposition. However, strong interactions between the coating and Zn2+ and sluggish transport of Zn2+ lead to high anodic polarization. Here, we present a bio-inspired silk fibroin (SF) coating with amphoteric charges to construct an interface reversible electric field, which manipulates the transfer kinetics of Zn2+ and reduces anodic polarization. The alternating positively and negatively charged surface as a build-in driving force can expedite and homogenize Zn2+ flux via the interplay between the charged coating and adsorbed ions, endowing the Zn-SF anode with low polarization voltage and stable plating/stripping. Experimental analyses with theoretical calculations suggest that SF can facilitate the desolvation of [Zn(H2O)6]2+ and provide nucleation sites for uniform deposition. Consequently, the Zn-SF anode delivers a high-rate performance with low voltage polarization (83 mV at 20 mA cm-2) and excellent stability (1500 h at 1 mA cm-2; 500 h at 10 mA cm-2), realizing exceptional cumulative capacity of 2.5 Ah cm-2. The full cell coupled with ZnxV2O5·nH2O (ZnVO) cathode achieves specific energy of ~ 270.5/150.6 Wh kg-1 (at 0.5/10 A g-1) with ~ 99.8% Coulombic efficiency and retains ~ 80.3% (at 5.0 A g-1) after 3000 cycles.

Novel quadrilateral-pore 2D-COFs as visible-light driven catalysts evaluated by the descriptor of integrated pz-orbital population.

In the past few decades, strategies for designing new two-dimensional covalent organic framework (2D-COF) structures have been limited to the shape of positive hexagonal pores, and the underlying relationship between their structure and electronic properties still remains unclear. Herein, novel 2D-COFs with C, N and H elements confined to the quadrilateral-pore skeleton based on first-principles calculations and the topological assembly of different benzene-based building blocks were designed and studied. These 2D-COFs enriched the topology types and can offer an ideal platform for band engineering aimed at spontaneously driving the hydrogen evolution reaction (HER) under visible light irradiation. The approach for regulating pore structures on nodes, linkers and linkages can effectively tune band gaps, and thus the 2D-COF, consisting of benzene building blocks and imine linkages, has the optimal activity for the photocatalytic HER under common visible light conditions. Furthermore, the integrated pz-orbital population was found to evaluate the photocatalytic activity efficiently. We demonstrate that the pz-orbital population is in linear relationship with the intensity of H+ adsorption, indicating that the total contribution of the pz-orbital electrons can be an efficient descriptor for screening suitable 2D-COF structures for use as photocatalysts for the HER. Therefore, this work presents a new strategy for designing novel quadrilateral-pore 2D-COFs as visible-light photocatalysts and provides an important insight into the relationship between catalytic activity and the population of activated electrons.

Investigation of the adsorption properties of gemcitabine anticancer drug with metal-doped boron nitride fullerenes as a drug-delivery carrier: a DFT study.

Anticancer-drug delivery is now becoming a challenging approach for researchers as it allows controlled drug delivery near cancerous cells with minimized generic collection and the avoidance of secondary side effects. Hence in this work, the applications of nanostructures as anticancer drug-delivery carriers were widely investigated to target cancerous tissues. Based on DFT calculations, we investigated the transition metal-doped boron nitride nanostructure as a drug-delivery agent for the gemcitabine drug utilizing the B3LYP/6-31G (d, p) level of theory. In this research, the adsorption energy and electronic parameters of gemcitabine on the interaction with the metal-doped BN nanostructures were studied. It has been observed that metal doping significantly enhances the drug-delivery properties of BN nanostructures. Among the investigated nanostructures, Ni-BN has been found to be the most prominent nanostructure to transport gemcitabine with an elevated value of adsorption energy in both the gas phase (-45.79) and water media (-32.46). The interaction between gemcitabine and BN nanostructures was confirmed through frontier molecular orbitals and stabilization energy analysis. The fractional charge transfer, MEP, NCI, and NBO analyses exposed the charge transfer from drug molecule to the BN nanostructures. Transition density maps and UV-VIS spectra were also plotted to investigate the excited-state properties of the designed complexes. Thus, the present study provides an in-depth interaction mechanism of the gemcitabine drug with BN, which reveals that metal-doped BN nanostructures can be a favorable drug-delivery vehicle for the gemcitabine anticancer drug.

Refine the evaluation of photophysical properties of organometallic chromophores under confined molecular crystal conditions.

Many impressive results have been achieved in the researches and developments of luminescent chromophore materials by combining experimental synthesis and characterization with the cooperative theoretical calculation. However, the existing theoretical studies are usually based on the intrinsic properties of isolated molecules and extend their properties to the whole molecular material directly, which will lead to the persistence of errors and affect the computational design of molecular materials with different morphology. Therefore, the study of multimolecular systems needs to further consider the environmental effects on molecules. This work is based on the calculation of a series of crystalline Ir(III) complexes under background charge conditions to reveal how the surrounding charge affects the photophysical properties of a series of transition metal Ir(III) complex materials. Through this method, the study of crystalline complexes is found to be more authentically reproduced the charge transfer state, energy level, and reorganization energy, etc., and shows the changes of luminescence characteristics and efficiency. The change of the electronic structure of the target molecule would be characterized more comprehensively, thus obtaining more accurate results for the excited states properties of molecular materials.

Can a molecular switch exist in both superalkali electride and superalkalide forms?

To combine both electride and alkalide characteristics in one molecular switch, it is shown herein that the phenalenyl radical and the M3 ring (M3-PHY, M = Li, Na, and K) stacked with parallel and vertical geometries are good candidates. The former geometry is the superalkali electride e-⋯M3+-PHY while the latter geometry is the superalkalide Mδ--M2(1-δ)+-PHY-. The superalkalide Mδ--M2(1-δ)+-PHY- may isomerize to the superalkali electride e-⋯M3+-PHY (M = Li, Na, and K) using suitable long-wavelength irradiation, while the latter may isomerize to the former with suitable short-wavelength irradiation. Also, applying suitable oriented external electric fields can drive the superalkalide Mδ-M2(1-δ)+-PHY- to change into the superalkali electride e-⋯M3+-PHY (M = Li, Na, and K). The differences in the static and dynamic first hyperpolarizability (ß0) values between them were also studied.

Constructing High Efficiency CoZnx Mn2-x O4 Electrocatalyst by Regulating the Electronic Structure and Surface Reconstruction.

It is an effective strategy to develop novel electrocatalysts with controllable defects to enhance their electrocatalytic activity and stability. However, how to precisely design these catalysts on the atom scale remains very difficult. Herein, several vacancy-dependent CoZnx Mn2-x O4 catalysts are prepared through tailoring the concentration of Zn ions. The in situ activation of the obtained products accelerates the surface reconstruction. The superior electrocatalytic performance can be ascribed to the formations of MOOH (Mn, Co) active species and abundant oxygen vacancies, which are comparable to noble IrO2 and Pt/C catalysts. Zn-CoMn2 O4 -1.5 catalyst delivers a cell voltage of 1.63 V and long durability. Density functional theory calculations demonstrate that the appropriate Zn ion doping can improve the density states of p electron on the surface of catalysts significantly and benefit the d-band center closing to Fermi level, suggesting their high charge carrier density and low adsorption energy.

In Situ Fabrication of Cuprous Selenide Electrode via Selenization of Copper Current Collector for High-Efficiency Potassium-Ion and Sodium-Ion Storage.

Selenium-based materials are considered as desirable candidates for potassium-ion and sodium-ion storage. Herein, an in situ fabrication method is developed to prepare an integrated cuprous selenide electrode by means of directly chemical selenization of the copper current collector with commercial selenium powder. Interestingly, only the electrolyte of 1 m potassium hexafluorophosphate dissolved in 1,2-dimethoxyethane with higher highest occupied molecular orbital energy and lower desolvation energy facilitates the formation of polyselenide intermediates and the further selenization of the copper current collector. Benefiting from the unique thin-film-like nanosheet morphology and the robust structural stability of the integrated electrode, the volume change and the loss of selenide species could be effectively restrained. Therefore, high performance is achieved in both potassium-ion batteries (462 mA h g-1 at 2 A g-1 for 300 cycles) and sodium-ion batteries (775 mA h g-1 at 2 A g-1 for 4000 cycles). The facile fabrication strategy paves a new direction for the design and preparation of high-performance electrodes.

Accurate Analysis of Anisotropic Carrier Mobility and Structure-property Relationships in Organic BOXD Crystalline Materials.

Charge mobility is an essential factor of organic crystalline materials. Although many investigators have made important progress, the exact relationship between the crystal structure and carrier mobility remains to be clarified. Fortunately, a series of bis-1,3,4-oxadiazole derivatives have been successfully prepared and reported. They have similar main molecular fragments but different crystal packing modes, which provide an ideal research objective for studying the effect of molecular packing on charge mobility in organic photoelectric conversion systems. In this work, the charge mobilities of these molecules are systematically evaluated from the perspective of first-principles calculation, and the effect of a molecular overlap on orbital overlap integral and final charge carrier mobility is fully discussed. It can be seen that the small intermolecular distance (less than 6 Å) is the decisive factor to achieve high electron mobility in π stacking, and better mobility can be obtained by increasing the hole migration distance appropriately. A larger dihedral angle of anisotropy is an important point limiting the charge mobility in the herringbone arrangement. It is hoped that the correlation results between the crystal structure and mobility can assist the experimental study and provide an effective way to improve the photoelectric conversion efficiency of the organic semiconductor devices and multiple basis for multiscale material system characterization and material information.

Exploring the potential of novel phenolic compounds as potential therapeutic candidates against SARS-CoV-2, using quantum chemistry, molecular docking and dynamic studies.

In the current study, the interaction of SARS-CoV-2 protein (A and B chains of nsp13) with different recently synthesized phenolic compounds (Sreenivasulu et al., Synthetic Communications, 2020, 112-122) has been studied. The interactions have been investigated by using molecular docking, quantum chemical and molecular dynamics simulations methods. The molecular structures of all the ligands are studied quantum chemically in terms of their optimized structures, 3-D orbital distributions, global chemical descriptors, molecular electrostatic potential plots and HOMO-LUMO orbital energies. All the ligands show reasonably good binding affinities with nsp-13 protein. The ligand L2 shows to have better binding affinities to Chain A and Chain B of nsp13 protein, which are -6.7 and -6.4 kcal/mol. The study of intermolecular interactions indicates that L2 shows different hydrophobic and hydrogen bond interactions with both chains. Furthermore, molecular dynamic simulations of the nsp13-L2 complex are obtained over a time scale of 60 ns, which indicates its stability and flexibility behavior as assessed in terms of its RMSD and RMSF graphs. The ADMET analysis also shows no violation of Lipinski rule (RO5) by studied phenolic compounds. We believe that the current findings will be further confirmed by in vitro and in vivo studies of these recent phenolic compounds for their potential as inhibitors for SARS-Co-V-2 virus.

Theoretical study on the molecular stacking interactions and charge transport properties of triazasumanene crystals - from explanation to prediction.

Computational analyses of the solid-state properties of triazasumanene (TAS), a C3-symmetric nitrogen-doped sumanene derivative, were carried out in this work. The present studies are mainly divided into two parts. In the first part, we demonstrated the differences in the interactions of the crystal packing between the racemic and the homochiral structures: the former having perpendicular columnar packing and the latter forming slipped helical packing. Two geometries of the TAS monomer, a theoretically optimized structure under vacuum and an X-ray crystal structure in experiment, were compared. It can be found that it is not the total interaction energy, but the local interactions (mainly the electrostatic interactions) of the molecular dimer that dominate the columnar stacking conformation. The second part involves the investigation of the potential charge transport properties of the crystals according to the semiclassical Marcus theory with the hopping mechanism using the simple dimer model. The charge transfer integrals of the two sets of dimers, racemic and homochiral dimer models, were compared as well. The calculation results show that the TAS racemic crystal was predicted to have an advantage of hole transport properties. The perpendicular columnar stacking of the homochiral conformation should essentially have better charge transport properties than the racemic conformation. It is reasonable to employ the simple dimer model built using optimized monomers under vacuum for the purpose of the prediction of the molecular packing conformation by IES calculation and the charge transport properties of the perpendicular columnar-stacking crystal. Our work provides a simple approach to the deep understanding of the structure-property relationship of bowl-shaped molecular systems in theory. It can help to facilitate the design and preparation of heteroatom-doped sumanene derivatives with perpendicular columnar stacking crystals as novel organic semiconductor materials.

Computational Studies on the Materials Combining Graphene Quantum Dots and Pt Complexes with Adjustable Luminescence Characteristics.

Graphene materials with particular properties are proved to be beneficial to photoelectric devices, but there are rare reports on a positive effect by graphene on emissive layer materials of organic light-emitting diodes (OLEDs) previously. On the basis of the latest important experiments, an OLED device with the aid of graphene quantum dots shows the dawn of their application for luminescent materials. The luminescence performance has been improved, but the understanding of the internal excited-state radiation mechanism of the material needs further study. In this work, the Pt(II)-coordinated graphene quantum dot coplanar structures with different shapes are studied theoretically in detail, and the results present the improvement in phosphorescence under the promoted radiative decay and suppressed nonradiative decay. This composite combines the advantages of transition metal complexes and graphene quantum dots and also exhibits excellent properties in the light absorption region and carrier transportation for the OLED. This comprehensive theoretical calculation research can provide a comprehensive basis of the material design in the future.

Computational insight into newly anomalous delayed fluorescence emitters based on D-A-A structures.

In variety of skeleton structures of delayed fluorescence molecular materials, the D-A-A type has been widely concerned recently for its improved double efficiency of reverse intersystem crossing process (RISC). Based on the D-A-A structure, eight new D-TRZ-nPO molecules (D = dihydrophenazine (DHPZ), phenothiazine (PTZ), phenoxazine (PXZ) and 9,9-dimethyl-9,10-dihydroacridan (DMAC), TRZ = triphenyltriazine, n = 1 or 2) with potential performance improvement have been deeply investigated by theoretical calculations. Interestingly, these molecules with the closing energy levels of high-lying excited states and charge transfer characters may perform rare high-lying excited state delayed fluorescence. Meanwhile, the changes of RISC and the corresponding effects caused by D-A-A structure from low energy level to high energy level are analyzed in detail. Furthermore, DHPZ-TRZ-2PO with blue emission (452 nm) is expected to be a potential high-lying excited state delayed fluorescence material candidate.