Comparison of the effectiveness of piezocision and microosteoperforation in leveling mandibular anterior teeth.

INTRODUCTION: The primary aim of this study was to evaluate the effectiveness of piezocision and microosteoperforation (MOP) in accelerating the leveling of mandibular anterior teeth. The secondary aim was to evaluate the changes in periodontal parameters and the differences in patient comfort. METHODS: Forty-five patients in the study were randomly divided into 3 groups. After bonding mandibular teeth, the patients in the first group (9 girls, 6 boys) underwent piezocision, and the patients in the second group (10 girls, 5 boys) underwent MOP. Patients in the third group (7 girls, 8 boys) comprised the control group. The patients were asked to complete a visual analog scale for pain assessment during the first week of treatment and to complete the Oral Health Impact Profile-14 questionnaire at the end of the week. Little's irregularity index was measured from plaster models taken at the start of the mandibular bonding process, 4 weeks, 8 weeks, 12 weeks, and 16 weeks after the mandibular bonding process. Periodontal parameters were also recorded at baseline and 16 weeks. RESULTS: Our study results showed statistically significantly more orthodontic tooth movement in the piezocision group (mean difference, 7.60 ± 1.55) than in the control group (mean difference, 5.95±1.28) during the total study period (P = 0.015). In the MOP group, no significant difference in the alignment rate was observed at any time compared to the piezocision and control groups (P >0.05). CONCLUSIONS: The leveling of mandibular anterior teeth was accelerated by piezocision over 16 weeks, predominantly in the first 12 weeks, whereas MOP had no effect. It was concluded that piezocision is an acceptable procedure and has no destructive effect on the periodontal tissue.

Assessment of the effects of local platelet-rich fibrin injection and piezocision on orthodontic tooth movement during canine distalization.

INTRODUCTION: The study aimed to evaluate and compare the effects of local platelet-rich fibrin (PRF) injection and piezocision applications on tooth movement during canine distalization, as well as to evaluate any changes in the periodontal parameters. METHODS: Twenty-four patients were randomly divided into 2 groups. A randomly selected side of the maxillary arch received either PRF injection (PRF group) or piezocision (piezocision group). The contralateral sides of both groups served as the controls. After piezocision and PRF injection applications, canine distalization was initiated in both groups with a 150 g force. Patients were followed every 2 weeks for a total 12 of weeks. The following variables were evaluated: cephalometric measurements, the amount of canine distalization, molar mesialization, canine rotation, transversal changes in dental models, and periodontal parameters. RESULTS: The amount of canine distal movement was found to be greater in the experimental sides than in the control sides in both groups at 12 weeks (P <0.05). There were no differences in the amount of molar mesialization, canine rotation, or transversal measurements in both groups when compared with the experimental sides with the control sides (P >0.05). There were no differences in the skeletal measurements or periodontal parameters in both groups (P >0.05). In both groups, the maxillary incisors were retroclined and retracted. CONCLUSIONS: PRF and piezocision accelerated tooth movement, but there were no differences between the 2 applications in terms of speed, amount, duration of tooth movement, or periodontal parameters during canine distalization.

Pharyngeal airway, hyoid bone, and soft palate changes after Class II treatment with Twin-block and Forsus appliances during the postpeak growth period.

INTRODUCTION: This study aimed to compare cephalometrically the pharyngeal airway, hyoid bone, and soft palate (SP) changes after Class II malocclusion treatments using Twin-block (TWB) and Forsus Fatigue Resistant Device (FFRD) (3M Unitek Corp, 3M Dental Products, Monrovia, Calif) during the postpeak growth period. METHODS: Forty-two patients with Class II malocclusion treated during the postpeak growth period were randomly and retrospectively included in this study. These patients were divided into 2 treatment groups: TWB and FFRD. The skeletal, dental, pharyngeal airway, hyoid bone position, and SP measurements were obtained from the lateral cephalometric radiographs taken at the beginning and at the end of the treatment. Paired-samples and independent-samples t tests were used for the intragroup and intergroup comparisons, respectively. RESULTS: In the TWB group, the SNB (°), Md1-NB (mm), Md1-NB (°), and McNamara upper and lower pharyngeal airway dimensions significantly increased, whereas the ANB (°), AD1-Ba (mm), AD2-H (mm), adenoidal nasopharyngeal area, and SP angle decreased (P < 0.05). In the FFRD group, the SNB (°), Md1-NB (mm), Md1-NB (°), Ptm-Ba (mm), and McNamara upper airway dimensions significantly increased, whereas the ANB (°), AD2-H (mm), and interincisor angle decreased (P < 0.05). Moreover, there were statistically significant differences in the Md1-NB angles and SP thicknesses between the 2 groups (P < 0.05). CONCLUSIONS: The effects of TWB and FFRD treatment on the airway during the postpeak growth period were similar. However, the FFRD caused a greater mandibular incisor protrusion.

Esthetic evaluation of profile photographs showing various sagittal and vertical patterns.

INTRODUCTION: The purpose of this study was to determine the esthetic preferences of people at different levels of society and also to determine whether this preference is affected by sex, age, education level, social status, geographic region, and individual profile factors. METHODS: Facial profile photographs of 1 man and 1 woman, each having a profile designated as ideal (the ideal profile), were digitized. The sagittal and vertical dimensions of these photographs were modified, and 9 variations of each profile picture were obtained using different combinations of alterations. The photographs were scored by 373 participants. For the analysis, Mann-Whitney U and Kruskal Wallis-H tests were used in the comparison of the scores. RESULTS: The ideal profile was the most preferred in both sexes, whereas the least preferred was a severe Class III malocclusion with a reduced vertical dimension of 8 mm. In general, esthetics decreased as it moved away from the ideal profile in a sagittal or vertical direction. CONCLUSIONS: Some factors from among those sampled (sex, age, education, social status, geographic region, and personal profile) affected esthetic preference, whereas others did not.

Comparative evaluation of salivary microbial levels and periodontal status of patients wearing fixed and removable orthodontic retainers.

INTRODUCTION: The purpose of this study was to compare and evaluate salivary microbial levels and periodontal status in patients using a fixed lingual retainer, a removable vacuum-formed retainer, or a Hawley retainer after orthodontic treatment with fixed appliances. METHODS: Forty-five patients who finished their orthodontic treatment with fixed appliances and were about to start the retention phase were randomly divided into the following 3 groups of 15 individuals each: the fixed lingual retainer group, the vacuum-formed retainer group, and the Hawley retainer group. Periodontal measurements, such as the plaque index, gingival index, probing depth, and bleeding on probing, were obtained at the following 4 time points: at debonding (T0) and 1 week (T1), 5 weeks (T2), and 13 weeks (T3) after debonding. Saliva samples were collected 3 times in total: at T0, T2, and T3. A quantitative analysis for Streptococcus mutans and Lactobacillus casei was performed with the use of real-time polymerase chain reaction. The Kruskal-Wallis test and 1-way analysis of variance were used for the statistical comparisons of the groups. RESULTS: No statistically significant difference in salivary S mutans and L casei levels was found among the 3 groups (P >0.05). They showed no statistically significant differences in plaque index, gingival index, bleeding on probing, and probing depth values (P >0.05). All periodontal parameters showed statistically significant decreases from T0 to T3 in all 3 groups (P <0.001). The S mutans and L casei levels were decreased significantly from T2 to T3 in the lingual retainer and Hawley retainer groups, whereas they decreased significantly from T0 to T3 in the vacuum-formed retainer group. CONCLUSIONS: Fixed and removable orthodontic retainers do not differ in salivary S mutans and L casei levels and periodontal status. With all retainers, regardless of whether they are fixed or removable, oral hygiene improved after orthodontic treatment with fixed appliances.

Evaluation of the Facial Soft-Tissue Thickness in Patients With Cleft Lip and Palate.

AIM: In this study the authors aimed to evaluate craniofacial morphology and facial soft tissue thickness of the patients with cleft lip and palate.(CLP), and to compare the results with a sex and age-matched noncleft healthy control group. METHODS: Craniofacial and soft tissue thickness measurements of 20 patients with unilateral cleft lip palate (UCLP) and 20 patients with bilateral cleft lip palate (BCLP) were compared with 20 noncleft control subjects. Angles between Sella-Nasion-A point, Sella-Nasion-B point, Nasion-A and Nasion-B line, Sella-Nasion line and Gonion-Gnation line, and linear (glabella, rhinion, subnasale, labrale superius, stomion, labrale inferius, labiomentale, pogonion, and gnathion) measurements were assessed on lateral cephalometric radiographs. Group differences were evaluated with 1-way analysis of variance and post hoc Tukey test. RESULTS: Unilateral cleft lip palate and BCLP groups demonstrated lower values of skeletal measurements than control group except for Sella-Nasion line and Gonion-Gnation line value (P < 0.01). Maxillary incisors were retruded in BCLP group compared with the other groups (P < 0.001). Thickness of the rhinion, subnasale, and stomion demonstrated no significant difference between UCLP and BCLP groups (P > 0.05). Thickness of rhinion and stomion was found significantly higher in both groups, and thickness of the subnasale was found significantly lower than the healthy group (P < 0.05). CONCLUSION: Findings of the study suggested that patients with CLP showed differences on craniofacial morphology and facial soft tissue thickness. Before planning orthodontic treatment and esthetic surgeries, soft tissue thickness should be taken into consideration in addition to skeletal measurements in CLP patients.

Effects of probiotics on salivary Streptecoccus mutans and Lactobacillus levels in orthodontic patients.

INTRODUCTION: In this study, we aimed to determine the effect of regular probiotic consumption on microbial colonization in saliva in orthodontic patients and to comparatively evaluate the difference between the systemic consumption of probiotic products and the local application. METHODS: This study included 3 groups with 15 orthodontic patients in each. The control group included patients who had no probiotic treatment, the subjects in the kefir group consumed 2 × 100 ml of kefir (Atatürk Orman Ciftligi, Ankara, Turkey) per day, and the subjects in the toothpaste group brushed their teeth with toothpaste with probiotic content (GD toothpaste; Dental Asia Manufacturing, Shah Alam, Selangor, Malaysia) twice a day. Samples were collected at 3 times: beginning of the study, 3 weeks later, and 6 weeks later. The salivary flow rate, buffer capacity, and Streptococcus mutans and Lactobacillus levels in the saliva were evaluated. Chair-side kits were used to determine the S mutans and Lactobacillus levels. RESULTS: A statistically significant decrease was observed in the salivary S mutans and Lactobacillus levels in the kefir and toothpaste groups compared with the control group (P <0.05). A statistically significant increase was observed in the toothpaste group compared with the control and kefir groups in buffer capacity. Changes in the salivary flow rate were not statistically significant. CONCLUSIONS: The regular use of probiotics during fixed orthodontic treatment reduces the S mutans and Lactobacillus levels in the saliva.

Effect of menstrual cycle on orthodontic pain perception : A controlled clinical trial.

BACKGROUND AND OBJECTIVE: The aim of this prospective, single-center, controlled clinical trial was to evaluate the effects of menstrual cycle phases on orthodontic pain perception. MATERIALS AND METHODS: A total of 48 women between 16 and 20 years old with regular menstrual periods who were scheduled to undergo extraction of two upper first premolars for orthodontic treatment were enrolled in this study. Laceback ligatures were used to move canines distally. After activating the laceback ligatures, each patient completed a questionnaire in order to assess pain and quality of life. Pain perception was recorded by patients on a visual analogue scale (VAS) and a verbal rating scale-4 (VRS) immediately after activation (T1) and 24 h after activation (T2). During the appointment, each patient's menstrual-cycle phase (follicular or luteal) was determined by asking some questions about her cycle. For statistical analysis of data, the Mann-Whitney U, independent t test, and Wilcoxon tests were applied. RESULTS: Mean orthodontic pain score was 1.96 ± 0.80 and 47.08 ± 21.68 in the follicular phase, 1.92 ± 0.82 and 46.25 ± 18.92 in the luteal phase at T1 using the VRS and VAS, respectively. Orthodontic pain scores were worse in those patients in the luteal phase than those in the follicular phase (p < 0.05) in terms of both VRS (p = 0.025) and VAS (p = 0.046). No significant difference between pain scores at T1 and those at T2 in both luteal and follicular phases (p > 0.05) were observed. CONCLUSION: The menstrual phase has an influence on the perception of orthodontic pain which is higher in the luteal phase following the activation of laceback ligatures. In clinical practice, the phases of the menstrual cycle may have a significant role in how women perceive orthodontic pain.

Effects of remineralization procedures on shear bond strengths of brackets bonded to demineralized enamel surfaces with self-etch systems.

OBJECTIVE: To compare the effects of different remineralization procedures on the surface roughness of teeth, shear bond strengths (SBSs), and Adhesive Remnant Index scores of self-etching primer (SEP) used to bond orthodontic brackets to previously treated demineralized enamel surfaces. MATERIALS AND METHODS: A total of 140 extracted human premolar teeth were randomly divided into seven equal groups. Group I was the control group. A demineralization procedure was performed in the other six groups. A remineralization procedure was performed before bonding by using casein phosphopeptide-amorphous calcium phosphate, fluoride, a microabrasion mixture (18% hydrochloric acid-fine pumice), a microabrasion agent, and resin infiltration in groups III to VII. Brackets were bonded using a self-etching primer/adhesive system. The specimens were tested for SBS. The roughness and morphology of the enamel surfaces were analyzed using profilometer and scanning electron microscopy. Data were analyzed with analysis of variance, Tukey, and G-tests at the α  =  .05 level. RESULTS: Significant differences were found in the SBS values among the seven groups (F  =  32.69, P  =  .003). The lowest SBS value was found in group II (2.62 ± 1.46 MPa). No significant differences were found between groups I, III, and VII, between groups III and IV, or between groups V and VI. The differences in the roughness values were statistically significant among the groups (P  =  .002). CONCLUSIONS: Remineralization procedures restore the decreased SBS of orthodontic brackets and decrease surface roughness caused by enamel demineralization. SEPs provide clinically acceptable SBS values for bonding orthodontic brackets to previously treated demineralized enamel surfaces.

Effects of different pre-treatment methods on the shear bond strength of orthodontic brackets to demineralized enamel.

OBJECTIVE: To compare the effects of different treatment methods used for the enamel damage, on the shear bond strength (SBS) and fracture mode of orthodontic brackets. MATERIALS AND METHODS: Freshly-extracted 140 premolars were randomly allocated to seven groups: Group I was considered as the control of other groups. The remaining groups were exposed to demineralization. In group II, brackets were directly bonded to the demineralized enamel surface. CPP-ACP paste (GC Tooth Mousse), fluoride varnish (Bifluorid 12), microabrasion with a mixture prepared with 18% hydrochloric acid and fine pumice powder, microabrasion with an agent (Opalustre) and resin infiltrant (Icon®) were applied in Groups III, IV, V, VI and VII, respectively. The specimens were tested for SBS and bond failures were scored according to the Adhesive Remnant Index (ARI). Analysis of variance and Tukey tests were used to compare the SBS of the groups. ARI scores were compared with G-test. The statistical significance was set at p < 0.05 level. RESULTS: Statistically significant differences were found among seven groups (F = 191.697; p < 0.001). The SBSs of groups I (mean = 18.8 ± 2.0 MPa) and VII (mean = 19.1 ± 1.4 MPa) were significantly higher than the other groups. No statistically significant difference was found between groups IV (mean = 11.5 ± 1.2 MPa) and V (mean = 12.6 ± 1.5 MPa). The differences in ARI scores of the groups were statistically significant (p < 0.01). CONCLUSIONS: All demineralization treatment methods improve bonding to demineralized enamel. Resin infiltrant application after demineralization showed similar bond strength values as intact enamel.

Alveolar bone changes after asymmetric rapid maxillary expansion.

OBJECTIVE: To quantitatively evaluate the effects of asymmetric rapid maxillary expansion (ARME) on cortical bone thickness and buccal alveolar bone height (BABH), and to determine the formation of dehiscence and fenestration in the alveolar bone surrounding the posterior teeth, using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: The CBCT records of 23 patients with true unilateral posterior skeletal crossbite (10 boys, 14.06 ± 1.08 years old, and 13 girls, 13.64 ± 1.32 years old) who had undergone ARME were selected from our clinic archives. The bonded acrylic ARME appliance, including an occlusal stopper, was used on all patients. CBCT records had been taken before ARME (T1) and after the 3-month retention period (T2). Axial slices of the CBCT images at 3 vertical levels were used to evaluate the buccal and palatal aspects of the canines, first and second premolars, and first molars. Paired samples and independent sample t-tests were used for statistical comparison. RESULTS: The results suggest that buccal cortical bone thickness of the affected side was significantly more affected by the expansion than was the unaffected side (P < .05). ARME significantly reduced the BABH of the canines (P < .01) and the first and second premolars (P < .05) on the affected side. ARME also increased the incidence of dehiscence and fenestration on the affected side. CONCLUSIONS: ARME may quantitatively decrease buccal cortical bone thickness and height on the affected side.

Cone-beam computed tomography evaluation of dentoskeletal changes after asymmetric rapid maxillary expansion.

INTRODUCTION: The aims of this study were to quantitatively evaluate the changes in arch widths and buccolingual inclinations of the posterior teeth after asymmetric rapid maxillary expansion (ARME) and to compare the measurements between the crossbite and the noncrossbite sides with cone-beam computed tomography (CBCT). METHODS: From our clinic archives, we selected the CBCT records of 30 patients with unilateral skeletal crossbite (13 boys, 14.2 ± 1.3 years old; 17 girls, 13.8 ± 1.3 years old) who underwent ARME treatment. A modified acrylic bonded rapid maxillary expansion appliance including an occlusal locking mechanism was used in all patients. CBCT records had been taken before ARME treatment and after a 3-month retention period. Fourteen angular and 80 linear measurements were taken for the maxilla and the mandible. Frontally clipped CBCT images were used for the evaluation. Paired sample and independent sample t tests were used for statistical comparisons. RESULTS: Comparisons of the before-treatment and after-retention measurements showed that the arch widths and buccolingual inclinations of the posterior teeth increased significantly on the crossbite side of the maxilla and on the noncrossbite side of the mandible (P <0.05). Comparison of the 2 sides showed statistically significant differences in both the maxilla and the mandible (P <0.05). CONCLUSIONS: After ARME treatment, the crossbite side of the maxilla and the noncrossbite side of the mandible were more affected than were the opposite sides.

Can demineralized enamel surfaces be bonded safely?

OBJECTIVE: To evaluate and compare the effects of enamel demineralization, microabrasion therapy and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) application on the shear bond strength (SBS) of orthodontic brackets bonded to enamel surfaces and enamel color. MATERIALS AND METHODS: Eighty freshly extracted human maxillary premolar teeth were allocated to one of the four groups. Brackets were bonded directly to non-demineralized enamel surfaces in Group I (control group), directly to the demineralized enamel surfaces in Group II, to demineralized enamel surfaces after CPP-ACP application in Group III and to demineralized enamel surfaces after microabrasion therapy in Group IV. The samples were stored in water for 24 h at 37°C and then underwent thermocycling. The SBS in megapascals (MPa) was determined by a shear test with 0.5 mm/min crosshead speed and failure types were classified with modified adhesive remnant index scores. The data were analyzed with one-way analyses of variance (ANOVA), Tukey and chi-square tests at the α = 0.05 level. RESULTS: Significant differences were found among the four groups (F = 21.57, p < 0.01). No significant difference was found between Group I and III (17.12 ± 2.84 and 15.08 ± 3.42 MPa, respectively) or between Group III and IV (12.82 ± 2.64 MPa). The lowest SBS value was determined in Group II (5.88 ± 2.12 MPa). Enamel demineralization, microabrasion therapy and CPP-ACP application affected enamel color significantly. CONCLUSION: CPP-ACP application and microabrasion therapy are able to increase the decreased SBS of orthodontic brackets because of enamel demineralization.

Effects of 2 bracket and ligation types on plaque retention: a quantitative microbiologic analysis with real-time polymerase chain reaction.

INTRODUCTION: The aim of this study was to evaluate the effects of self-ligating brackets and conventional brackets ligated with stainless steel ligatures on dental plaque retention and microbial flora. METHODS: Twenty boys (mean age, 14.2 ± 1.5 years) underwent bonding with self-ligating bracket systems and conventional standard edgewise bracket systems ligated with stainless steel ligatures with a split-mouth design. Clinical measurements, including plaque index, probing pocket depth, and bleeding on probing, were obtained before bonding, 1 week after bonding, and 3 months after bonding. Supragingival plaque samples were obtained at baseline and 3 months after bonding for the detection of bacteria. A quantitative analysis for Streptococcus mutans, Streptococcus sobrinus, Lactobacillus casei, and Lactobacillus acidophilus was performed using real-time polymerase chain reaction. The Mann-Whitney U test and the Hotelling T(2) multivariate test were used for statistical comparisons of the groups. RESULTS: The numbers of S mutans, S sobrinus, L casei, and L acidophilus were not statistically different between self-ligating brackets and conventional brackets ligated with stainless steel ligatures (P >0.05). The 2 archwire ligation techniques showed no statistically significant differences in plaque index, bleeding on probing, and probing pocket depth values of the bonded teeth (P >0.05). All clinical parameters and the numbers of all microorganisms showed statistically significant increases from baseline to 3 months after bonding in both groups (P <0.001). CONCLUSIONS: Self-ligating brackets and conventional brackets ligated with stainless steel ligatures do not differ with regard to dental plaque retention.