Can Silicone Passive Samplers be Used for Measuring Exposure of e-Waste Workers to Flame Retardants?

Silicone passive samplers were assessed for measuring personal exposure to 37 flame retardants at three Québec e-waste recycling facilities. Silicone brooches (n = 45), wristbands (n = 28), and armbands (n = 9) worn during a ∼8 h work shift accumulated detectable amounts of 95-100% of the target compounds. Brooch concentrations were significantly correlated with those from active air samplers from which we conclude that the brooches could be used to approximate inhalation exposure and other exposures related to air concentrations such as dermal exposure. The generic sampling rate of the brooch (19 ± 11 m3 day-1 dm-2) was 13 and 22 times greater than estimated for home and office environments, respectively, likely because of the dusty work environment and greater movement of e-waste workers. BDE-209 concentrations in brooches and wristbands were moderately and significantly (p < 0.05) correlated with levels in blood plasma; organophosphorus esters in brooches and wristbands were weakly and insignificantly correlated with their metabolite biomarkers in post-shift spot urine samples. Silicone brooches and wristbands deployed over a single shift in a dusty occupational setting can be useful for indicating the internal exposure to compounds with relatively long biological half-lives, but their use for compounds with relatively short half-lives is not clear and may require either a longer deployment time or an integrated biomarker measure.

Overlapping vulnerabilities in workers of the electronics recycling industry formal sector: A commentary.

Vulnerabilities in workers performing electronics recycling (e-recycling) in the informal sector worldwide have been well documented. However, the growing e-recycling industry in the formal sector still brings many challenges to protect the health of workers and their environment. This commentary aims to draw attention to the overlooked vulnerabilities faced by the workers of the e-recycling industry formal sector in high-income countries and discuss the potential impact on health inequalities experienced by these workers. Expanding the definition of vulnerability, not limited to the biological susceptibility to chemical and physical exposures, the demographic characteristics of workers in the e-recycling formal sector often reveal social groups known to be disadvantaged regarding occupational exposures and health effects, including young workers, immigrant or ethnic minorities, and workers with mental or physical health issues or disabilities. Overlapping structural vulnerabilities of the e-recycling industry stem from its newness, its working conditions, its conditions of employment, and the sociodemographic characteristics of its workforce. This phenomenon in high-income countries is not restricted to the e-recycling industry alone. It is rather a symptom of more generalized macro socioeconomical phenomena. The present challenges are in line with the new gig and green economies and changes in the global market, and their consequences on the solid waste sector. Continued efforts to strengthen the inclusion of social aspects of health into the complex interaction of the structural vulnerabilities met by e-recycling workers will be essential to anticipate and prevent health issues in this essential but still emerging workforce.

Multi-exposures to suspected endocrine disruptors in electronic waste recycling workers: Associations with thyroid and reproductive hormones.

Electronic waste recycling (e-recycling) exposes workers to substances such as flame retardants and metals. Some of them are known or suspected endocrine disruptors that could affect hormonal homeostasis and eventually result in adverse health outcomes. Our aim was to measure biological concentrations of organophosphate ester (OPE) metabolites, polybrominated diphenyl ethers (PBDEs), mercury, lead and cadmium in e-recycling workers, and to explore associations with thyroid and sexual hormones. In a cross-sectional study, end-of-shift blood and urine spot samples were collected from 23 women and 77 men in six e-recycling facilities and one commercial recycling facility. Urinary concentrations of 15 OPE metabolites and mercury, and blood concentrations of 12 PBDE congeners, lead, cadmium, and thyroid (thyroxine [T4], triiodothyronine [T3], thyroid stimulating hormone [TSH]) and sexual (testosterone [T], estradiol, Follicle Stimulating Hormone [FSH], Luteinizing hormone [LH]) hormones were measured. E-recycling workers had higher concentrations of BDE209, all OPE metabolites, and lead than commercial recycling workers. In e-recycling workers, plasma geometric mean concentration of BDE209 was 18 ng/g lipids (geometric standard deviation [GSD]: 2.8) vs.1.7 ng/g lipids (GSD: 2.8) in commercial recycling, and urinary geometric mean concentration of diphenyl phosphate (DPhP), a major metabolite of triphenyl phosphate, was 1.7 ng/ml (GSD: 2.5), vs. 0.95 ng/ml (GSD: 2.0). In men, a two-fold increase in BDE209 was associated with 3.1% (95% Confidence interval: 0.07, 6.1) higher levels of total T4, and a two-fold increase in tert-butyl diphenyl phosphate (tb-DPhP) was associated with 18% (-29, -4.7) lower total T, 18% (-27, -6.9) lower free T and 13% (-25, 0.70) lower free T/estradiol ratio. In women, a two-fold increase in BDE153 was associated with 10% (-17, -3.2) lower free T3. To our knowledge, this is the first study to show associations between OPE metabolites and sex hormones in adults. Although some of our results are not conclusive and need replication, they suggest that prudent avoidance should be applied in risk management of flame retardants.

Halogenated flame retardants and organophosphate esters in the air of electronic waste recycling facilities: Evidence of high concentrations and multiple exposures.

BACKGROUND: In response to a worldwide increase in production of electronic waste, the e-recycling industry is rapidly rowing. E-recycling workers are exposed to many potentially toxic contaminants, among which flame retardants (FRs), mainly suspected of being endocrine disruptors, are thought to be the most prevalent. OBJECTIVE: To conduct an exposure assessment of four chemical groups of FRs in Canadian e-recycling facilities, and to identify the main cofactors of exposure. METHODS: Personal air samples were collected over a workday for 85 workers in six e-recycling facilities, grouped into three facility sizes, and for 15 workers in control commercial waste facilities. Total particulate matter was measured by gravimetry with stationary air samples. FRs were collected on OSHA versatile samplers, which allow particulate and vapor phases collection. Fifteen polybrominated diphenyl ether congeners (PBDEs), nine novel brominated (NBFRs), two chlorinated (ClFRs), and fourteen organophosphate ester (OPEs) flame retardants were analysed by gas chromatography-mass spectrometry. Sociodemographic data, tasks performed and materials processed by participating workers were recorded. Tobit regressions were used to identify cofactors of exposure, and their conclusions were corroborated using semi-parametric reverse Cox regressions. RESULTS: Thirty-nine of the 40 FRs analysed were detected in at least one air sample in e-recycling, and workers in this industry were exposed on average to 26 (range 12 to 39) different substances. The most detected chemical group of FRs in e-recycling was PBDEs with geometric mean sums of all congeners ranging from 120 to 5100 ng/m3, followed by OPEs with 740 to 1000 ng/m3, NBFRs with 7.6 to 100 ng/m3, and finally ClFRs with 3.9 to 32 mg/m3. The most important cofactor of exposure was the size of the e-recycling facility, with the largest one presenting on average 12 times the concentrations found in the control facility. Among tasks as potential cofactors of exposure, manual dismantling and baler operation exposed workers to some of the highest concentrations of PBDEs and ClFRs. There was a reduction of up to 27% in exposure to FRs associated with a 3-year increase in seniority. Finally, particulate matter concentrations in e-recycling facilities were highly correlated with all chemical classes except OPEs, and were higher in the large facility. CONCLUSIONS: Among the FRs analysed, PBDE exposure was particularly high in e-recycling. Dust and particulate matter reduction strategies in these workplaces, together with training on proper working practices would certainly be important first steps to lower occupational exposures and prevent potential health effects.

Fungal bioaerosols in biomethanization facilities.

Biomethanization is a new technology used for green-waste valorization where organic waste is biodegraded by microbial communities under anaerobic conditions. The main product of this type of anaerobic digestion is a biogas used as an energy source. Moving and handling organic waste may lead to the emission of high concentrations of bioaerosols. High exposure levels are associated with adverse health effects amongst green environment workers. Fungal spores are suspected to play a role in many respiratory illnesses. There is a paucity of information related to the detailed fungal diversity in biomethanization facilities. The aim of this study was to provide an in-depth description of fungal bioaerosols in biomethanization work environments using a next-generation sequencing approach combined with real-time polymerase chain reaction (PCR). Two biomethanization facilities treating different wastes were visited during the sampling campaign (n = 16). Quantification of Penicillium/Aspergillus and Aspergillus fumigatus revealed a greater exposure risk during summer for both facilities visited. Concentrations of Penicillium and Aspergillus were similar in all work areas in both biomethanization facilities. Taxonomy analyses showed that the type of waste treated affects the fungal diversity of aerosols emitted. Although eight classes were evenly distributed in all samples, Eurotiomycetes were more dominant in the first facility and Agaricomycetes were dominant in the second one. A large diversity profile was observed in bioaerosols from both facilities showing the presence of pathogenic fungi. The following fungi detected are known allergens and/or are opportunistic pathogens: Aspergillus, Malassezia, Emericella, Fusarium, Acremonium, and Candida. Daily exposure to these fungi may put workers at risk. The information from this study can be used as a reference for minimizing occupational exposure in future biomethanization facilities. Implications: Biomethanization is a new technology used for green-waste valorization where organic waste is biodegraded by microbial communities. Effective waste management is increasingly recognized as a strategic approach for achieving newly created regulations concerning the disposal of organic residues; therefore, an expansion of facilities is expected. Workers' exposure to diverse fungal communities is certain, as fungi are ubiquitous and necessary in organic matter decomposition. Monitoring this occupational exposure is important in order to prevent workers' health problems.

Has the question of e-waste opened a Pandora's box? An overview of unpredictable issues and challenges.

Despite regulatory efforts and position papers, electrical and electronic waste (e-waste) remains ill-managed as evidenced by the extremely low rates of proper e-waste recycling (e-recycling) worldwide, ongoing illegal shipments to developing countries and constantly reported human health issues and environmental pollution. The objectives of this review are, first, to expose the complexity of e-waste problems, and then to suggest possible upstream and downstream solutions. Exploring e-waste issues is akin to opening a Pandora's box. Thus, a review of prevailing e-waste management practices reveals complex and often intertwined gaps, issues and challenges. These include the absence of any consistent definition of e-waste to date, a prevalent toxic potential still involving already banned or restricted hazardous components such as heavy metals and persistent and bioaccumulative organic compounds, a relentless growth in e-waste volume fueled by planned obsolescence and unsustainable consumption, problematic e-recycling processes, a fragile formal e-recycling sector, sustained and more harmful informal e-recycling practices, and more convoluted and unpredictable patterns of illegal e-waste trade. A close examination of the e-waste legacy contamination reveals critical human health concerns, including significant occupational exposure during both formal and informal e-recycling, and persistent environmental contamination, particularly in some developing countries. However, newly detected e-waste contaminants as well as unexpected sources and environmental fates of contaminants are among the emerging issues that raise concerns. Moreover, scientific knowledge gaps remain regarding the complexity and magnitude of the e-waste legacy contamination, specifically, a comprehensive characterization of e-waste contaminants, information on the scale of legacy contamination in developing countries and on the potential environmental damage in developed countries, and a stronger body of evidence of adverse health effects specifically ascribed to e-waste contaminants. However, the knowledge accumulated to date is sufficient to raise awareness and concern among all stakeholders. Potential solutions to curb e-waste issues should be addressed comprehensively, by focusing on two fronts: upstream and downstream. Potential upstream solutions should focus on more rational and eco-oriented consumer habits in order to decrease e-waste quantities while fostering ethical and sustained commitments from manufacturers, which include a limited usage of hazardous compounds and an optimal increase in e-waste recyclability. At the downstream level, solutions should include suitable and pragmatic actions to progressively reduce the illegal e-waste trade particularly through international cooperation and coordination, better enforcement of domestic laws, and monitoring in both exporting and receiving countries, along with the supervised integration of the informal sector into the recycling system of developing countries and global expansion of formal e-waste collection and recycling activities. Downstream solutions should also introduce stronger reverse logistics, together with upgraded, more affordable, and eco-friendly and worker-friendly e-recycling technologies to ensure that benefits are derived fully and safely from the great economic potential of e-waste.

Bioaerosols concentrations in working areas in biomethanization facilities.

This study sought to fill the gap in information about the type and the concentration of bioaerosols present in the air of biomethanization facilities (BF). Evaluation of bioaerosol composition and concentration was achieved in two biomethanization facilities located in Eastern Canada, during summer and winter. In order to have a thorough understanding of the studied environment, the methodology combined culture of bacteria and molds, qualitiative polymerase chain reaction (qPCR) for specific microorganisms, endotoxin quantification, and next-generation sequencing (NGS) for bacterial diversity. Results revealed that workers in biomethanization facilities are exposed to bioaerosols and pathogenic microorganisms similar to those found in composting plants. However, human exposure levels to bioaerosols are lower in BF than in composting plants. Despite these differences, use of personal protective equipment is recommended to lower the risks of health problems. IMPLICATIONS: Biomethanization is a new technology used in eastern Canada for waste management. In the next few years, it is expected that there will be an expansion of facilities in response of tight governmental regulations. Workers in biomethanization facilities are exposed to various amounts of bioaerosols composed of some harmful microorganisms. Therefore, monitoring this occupational exposure could be an interesting tool for improving worker's health.

A Systematic Review of Reported Exposure to Engineered Nanomaterials.

BACKGROUND: Engineered nanomaterials (ENMs) have a large economic impact in a range of fields, but the concerns about health and safety of occupational activities involving nanomaterials have not yet been addressed. Monitoring exposure is an important step in risk management. Hence, the interest for reviewing studies that reported a potential for occupational exposure. METHODS: We systematically searched for studies published between January 2000 and January 2015. We included studies that used a comprehensive method of exposure assessment. Studies were grouped by nanomaterial and categorized as carbonaceous, metallic, or nanoclays. We summarized data on task, monitoring strategy, exposure outcomes, and controls in a narrative way. For each study, the strength of the exposure assessment was evaluated using predetermined criteria. Then, we identified all exposure situations that reported potential occupational exposure based on qualitative or quantitative outcomes. Results were synthesized and general conclusion statements on exposure situations were formulated. The quality of evidence for the conclusion statements was rated as low, moderate, or high depending on the number of confirmed exposure situations, the strength of the exposure assessment, and the consistency of the results. RESULTS: From the 6403 references initially identified, 220 were selected for full-text screening. From these, 50 studies describing 306 exposure situations in 72 workplaces were eligible for inclusion (27 industrial-scale plants and 45 research or pilot-scale units). There was a potential for exposure to ENMs in 233 of the exposure situations. Exposure occurred in 83% (N = 107) of the situations with carbonaceous ENMs, in 73% (N = 120) of those with metallic ENMs and in 100% (N = 6) of those with nanoclay. Concentrations of elemental carbon in the workers' breathing zone ranged from not detected (ND) to 910 µg m(-3) with local engineering controls (LEC), and from ND to 1000 µg m(-3) without those controls. For carbon nanofibres (CNFs), particle counts ranged from ND to 1.61 CNF structures cm(-3) with LEC, and from 0.09 to 193 CNF structures cm(-3) without those controls. The mass concentrations of aluminium oxide, titanium dioxide, silver, and iron nanoparticles (NPs) were ND, 10-150, 0.24-0.43, and 32 µg m(-3) with LEC, while they were <0.35, non-applicable, 0.09-33, and 335 µg m(-3) without those controls, respectively. CONCLUSIONS: Regarding the potential of exposure in the workplace, we found high-quality evidence for multiwalled carbon nanotubes (CNTs), single-walled CNTs, CNFs, aluminium oxide, titanium dioxide, and silver NPs; moderate-quality evidence for non-classified CNTs, nanoclays, and iron and silicon dioxide NPs; low-quality evidence for fullerene C60, double-walled CNTs, and zinc oxide NPs; and no evidence for cerium oxide NPs. We found high-quality evidence that potential exposure is most frequently due to handling tasks, that workers are mostly exposed to micro-sized agglomerated NPs, and that engineering controls considerably reduce workers' exposure. There was moderate-quality evidence that workers are exposed in secondary manufacturing industrial-scale plants. There was low-quality evidence that workers are exposed to airborne particles with a size <100nm. There were no studies conducted in low- and middle-income countries.

Green Jobs: Definition and Method of Appraisal of Chemical and Biological Risks.

In the wake of sustainable development, green jobs are developing rapidly, changing the work environment. However a green job is not automatically a safe job. The aim of the study was to define green jobs, and to establish a preliminary risk assessment of chemical substances and biological agents for workers in Quebec. An operational definition was developed, along with criteria and sustainable development principles to discriminate green jobs from regular jobs. The potential toxicity or hazard associated with their chemical and biological exposures was assessed, and the workers' exposure appraised using an expert assessment method. A control banding approach was then used to assess risks for workers in selected green jobs. A double entry model allowed us to set priorities in terms of chemical or biological risk. Among jobs that present the highest risk potential, several are related to waste management. The developed method is flexible and could be adapted to better appraise the risks that workers are facing or to propose control measures.

The photovoltaic industry on the path to a sustainable future--environmental and occupational health issues.

As it supplies solar power, a priori considered harmless for the environment and human health compared with fossil fuels, the photovoltaic (PV) industry seems to contribute optimally to reduce greenhouse gas emissions and, overall, to sustainable development. However, considering the forecast for rapid growth, its use of potentially toxic substances and manufacturing processes presenting health and safety problems may jeopardize its benefits. This paper aims to establish a profile of the PV industry in order to determine current and emerging environmental and health concerns. A review of PV system life cycle assessments, in light of the current state of the industry and its developmental prospects, reveals information deficits concerning some sensitive life cycle indicators and environmental impacts, together with incomplete information on toxicological data and studies of workers' exposure to different chemical and physical hazards. Although solar panel installation is generally considered relatively safe, the occupational health concerns related to the growing number of hazardous materials handled in the PV industry warrants an all-inclusive occupational health and safety approach in order to achieve an optimal equilibrium with sustainability. To prevent eco-health problems from offsetting the benefits currently offered by the PV industry, manufacturers should cooperate actively with workers, researchers and government agencies toward improved and more transparent research, the adoption of specific and stricter regulations, the implementation of preventive risk management of occupational health and safety and, lastly, greater responsibilization toward PV systems from their design until their end of life.