Features of Electrochemical Hydrogen Pump Based on Irradiated Proton Exchange Membrane.

An electrochemical hydrogen pump (EHP) with a proton exchange membrane (PEM) used as part of fusion cycle systems successfully combines the processes of hydrogen extraction, purification and compression in a single device. This work comprises a novel study of the effect of ionizing radiation on the properties of the PEM as part of the EHP. Radiation exposure leads to nonspecific degradation of membranes, changes in their structure, and destruction of side and matrix chains. The findings from this work reveal that the replacement of sulfate groups in the membrane structure with carboxyl and hydrophilic groups leads to a decrease in conductivity from 0.115 to 0.103 S cm-1, which is reflected in halving the device performance at a temperature of 30 °C. The shift of the ionomer peak of small-angle X-ray scattering curves from 3.1 to 4.4 nm and the absence of changes in the water uptake suggested structural changes in the PEM after the irradiation. Increasing the EHP operating temperature minimized the effect of membrane irradiation on the pump performance, but enhanced membrane drying at low pressure and 50 °C, which caused a current density drop from 0.52 to 0.32 A·cm-2 at 0.5 V.

Role of New Chiral Additives on Physical-Chemical Properties of the Nematic Liquid Crystal Matrix.

We have synthesized and studied three new chiral substances as additives to a nematic liquid crystal. The difference in the optical activity and chemical structure of additive molecules results in the appearance of the chiral nematic phase and the change in both the compatibility of the mixture components and temperature range of the liquid crystal phase. The role of additives with fundamentally different structures and optical activities is shown. The increase in the TNI that is observed in mixtures with 4-[(2S)-(+)-2-Methylbutoxy]benzoic acid indicate the possibility of the increase in order caused by the formation of molecularly rigid and elongated dimers of the additive, which was confirmed using infrared spectra. The doping of the nematic liquid crystal with (2R)-(+)-2-[4-[2-Chloro-4-(4-hexylphenyl)phenyl]phenoxy]propanoic acid causes the lowering of TNI. The binol derivative S-(+)-6-[1-[2-(5-Carboxypentoxy)naphthalen-1-yl]naphthalen-2-yl] oxyhexanoic acid has the highest chirality among the additives used. One can explain the effects observed in terms of the role of size, shape, and compatibility with the nematic matrix as shown by the molecules that are used as additives.

Controllable Synthesis of Hybrid Dendrimers Composed of a Carbosilane Core and an Aromatic Shell: Does Size Matter?

The controllable synthesis of novel hybrid dendrimers composed of flexible and rigid components was accomplished via effective Cu-catalyzed azide-alkyne cycloaddition ("click") reaction between azide-functionalized carbosilane cores of two generations and monoethynyl-substituted hexaphenylbenzene dendron. A comprehensive analysis of the thermal and phase behavior of dendrimers allows us to detect a similar performance of dendrimers of both generations which, in our opinion, can be due to the similar ratio of rigid and flexible blocks in the dendrimers regardless the generation of carbosilane cores. The propensity to crystallization and ordering after the annealing procedure was confirmed by DSC and SWAXS. We found that hybrid dendrimers have a tendency to order depending on their constituents of different structures. This is in contrast to homogeneous dendrimers whose propensity to order is determined by the dendrimer molecule as a whole.

True Molecular Composites: Unusual Structure and Properties of PDMS-MQ Resin Blends.

Poly(dimethyl siloxane)-MQ rubber molecular composites are easy to prepare, as it does not require a heterophase mixing of ingredients. They are characterized by perfect homogeneity, so they are very promising as rubber materials with controllable functional characteristics. The manuscript reveals that MQ resin particles can significantly, more than by two orders of magnitude, enhance the mechanical properties of poly(dimethyl siloxane), and, as fillers, they are not inferior to aerosils. In the produced materials, MQ particles play a role of the molecular entanglements, so rubber molecular weight and MQ filler concentration are the parameters determining the structure and properties of such composites. Moreover, a need for a saturation of the reactive groups and minimization of the surface energy of MQ particles also determine the size and distribution of the filler at different filler rates. An unusual correlation of the concentration of MQ component and the interparticle spacing was revealed. Based on the extraordinary mechanical properties and structure features, a model of the structure poly(dimethyl siloxane)-rubber molecular composites and of its evolution in the process of stretching, was proposed.

New Principles of Polymer Composite Preparation. MQ Copolymers as an Active Molecular Filler for Polydimethylsiloxane Rubbers.

Colorless transparent vulcanizates of silicone elastomers were prepared by mixing the components in a common solvent followed by solvent removal. We studied the correlation between the mechanical behavior of polydimethylsiloxane (PDMS)-rubber compositions prepared using MQ (mono-(M) and tetra-(Q) functional siloxane) copolymers with different ratios of M and Q parts as a molecular filler. The composition and molecular structure of the original rubber, MQ copolymers, and carboxyl-containing PDMS oligomers were also investigated. The simplicity of the preparation of the compositions, high strength and elongation at break, and their variability within a wide range allows us to consider silicone elastomers as a promising alternative to silicone materials prepared by traditional methods.

Supramolecular control of the structure and receptor properties of an amphiphilic hemicyanine chromoionophore monolayer at the air/water interface.

Designing sensors for toxic compounds such as mercury salts in aqueous solutions still remains one of the most pressing tasks of modern chemical research, since many existing systems do not show enough sensitivity and/or response. In this regard, the opportunities offered by supramolecular approaches can be used to improve both these characteristics by creating a new self-organized smart system. Herein, we show that barium cations, that according to the data of X-ray standing waves do not bind directly to the ionophore molecules in the monolayers at the air/water interface, could be used to efficiently preorganize such molecules to achieve supramolecular architecture. We demonstrate that such preorganization ensures both low analyte detection threshold and high fluorescent response. We reveal the interrelation of the monolayer structure and receptor characteristics of a sensory system and show that such cation-induced preorganization in Langmuir monolayers of a hemicyanine dithia-aza-crown-substituted chromoionophore inhibits the formation of non-fluorescent aggregates with low receptor function, and allows the quantitative detection of mercury cations using a ratiometric fluorometric approach.

Noninvasive high-frequency acoustic microscopy for 3D visualization of microstructure and estimation of elastic properties during hydrolytic degradation of lactide and ε-caprolactone polymers.

The monitoring of degradation processes' kinetics in polymers is one of the attractive possibilities of ultrasound technique applications that provide non-destructive imaging of polymers' internal microstructure and measurements of elastic properties. In this work, biodegradable polymers and copolymers based on L,L-lactide, D,L-lactide and ε-caprolactone have been studied at different stages of hydrolysis at 37 °C by high-frequency (100 and 200 MHz) ultrasound. The acoustic microscopy technique has been developed to reveal changes in the internal microstructure and bulk sound speed in polymer samples over a hydrolysis period of 25 weeks. Ultrasound imaging provides visualization of amorphous and crystalline phases, internal imperfections, variation in packing density, and other microstructural features. Acoustic images demonstrate nucleation, growth, and the changes in internal inhomogeneities in polymers during degradation accompanied by a decrease in the polymers' molecular weight. We associate the changes in the elastic properties (the speed of a longitudinal wave) with crystallinity variations in polymers during hydrothermal aging. The results of the ultrasound investigations are supplemented by gel permeation chromatography, differential scanning calorimetry, and wide-angle X-ray spectroscopy. STATEMENT OF SIGNIFICANCE: Monitoring the kinetics of degradation processes in polymers is one of the attractive possibilities of applying ultrasound techniques that provide non-destructive imaging of the polymers' internal microstructure and measurements of elastic properties. In this work, visualization of nucleation, growth, and evolution of internal inhomogeneities in the volume of polymers and variation of values of speed of longitudinal and transverse sound waves during hydrolysis are compared with measurements of molecular weight, density, data of DSC curves, and X-ray scattering analysis. We discuss several common phenomena that occur in the volume of poly(L-lactide) and poly(D,L-lactide) over the degradation process as well as improvement of elastic properties of the poly(ε -caprolactone) and poly(L-lactide-co-caprolactone) during hydrothermal aging.

Long-Sought Redox Isomerization of the Europium(III/II) Complex Achieved by Molecular Reorientation at the Interface.

Redox isomerism, that is, the change of a metal cation valence state in organic complexes, can find promising applications in multistable molecular switches for various molecular electronic devices. However, despite a large number of studies devoted to such processes in organic complexes of multivalent lanthanides, redox-isomeric transformations were never observed for europium. In the present work, we demonstrate the unique case of redox isomerization of Eu(III)/Eu(II) complexes on the example of Eu double-decker octa-n-butoxyphthalocyaninate (Eu[(BuO)8Pc]2) under ambient conditions (air and room temperature). It is shown that assumption of the face-on orientation on the aqueous subphase surface, in which two of each phthalocyanine decks in Eu[(BuO)8Pc]2 are located in different media (air and water), leads to the intramolecular electron transfer that results in the formation of a divalent Eu(II) cation in the complex. Lateral compression of the thus-formed monolayer results in the reorientation of bisphthalocyaninate to the edge-on state, in which the ligands can be considered identical, and occurrence of the reverse redox-isomeric transformation into the complex with a trivalent Eu cation. Both redox-isomeric states were directly observed by X-ray absorption near-edge structure spectroscopy in ultrathin films formed under different conditions.

Large-Size Single-Crystal Oligothiophene-Based Monolayers for Field-Effect Transistors.

High structural quality of crystalline organic semiconductors is the basis of their superior electrical performance. Recent progress in quasi two-dimensional (2D) organic semiconductor films challenges bulk single crystals because both demonstrate competing charge-carrier mobilities. As the thinnest molecular semiconductors, monolayers offer numerous advantages such as unmatched flexibility and light transparency as well  they are an excellent platform for sensing. Oligothiophene-based materials are among the most promising ones for light-emitting applications because of the combination of efficient luminescence and decent charge-carrier mobility. Here, we demonstrate single-crystal monolayers of unprecedented structural order grown from four alkyl-substituted thiophene and thiophene-phenylene oligomers. The monolayer crystals with lateral dimensions up to 3 mm were grown from the solution on substrates with various surface energies and roughness by drop or spin-casting with subsequent slow solvent evaporation. Our data indicate that 2D crystallization resulting in single-crystal monolayers occurs at the receding gas-solution-substrate contact line. The structural properties of the monolayers were studied by grazing-incidence X-ray diffraction/reflectivity, atomic force and differential interference contrast microscopies, and imaging spectroscopic ellipsometry. These highly ordered monolayers demonstrated an excellent performance in organic field-effect transistors approaching the best values reported for the thiophene or thiophene-phenylene oligomers. Our findings pave the way for efficient monolayer organic electronics highlighting the high potential of simple solution-processing techniques for the growth of large-size single-crystal monolayers with excellent structural order and electrical performance competing against bulk single crystals.

Close-packed polybutylcarbosilane dendrimers of higher generations.

Variation of generation number strongly affects the type of ordering found for polybutylcarbosilane dendrimers: G5 dendrimers are liquid-like, G6 are cubic liquid crystals and G7/G8 are disordered close-packed. It was revealed that G6 dendrimers are highly likely to form Im3[combining macron]m lattice structures with the parameter a = 5.15 nm, and a domain size that exceeds 100 nm.

Effect of Composition and Molecular Structure of Poly(l-lactic acid)/Poly(ethylene oxide) Block Copolymers on Micellar Morphology in Aqueous Solution.

The effect of the hydrophobic block length in diblock (PLLA x- b-PEO113, x = 64, 166, 418) and triblock (PLLA y- b-PEO91- b-PLLA y, y = 30, 52, 120) copolymers of l-lactic acid and ethylene oxide on the structure of micelles prepared by dialysis was studied by wide- and small-angle X-ray scattering in dilute aqueous solution, dynamic light scattering, transmission electron microscopy, atomic force microscopy, and force spectroscopy. It was found that the size of the crystalline PLLA core is weakly dependent on the PLLA block length. In addition to individual micelles, a number of their micellar clusters were detected with characteristic distance between adjacent micelle cores decreasing with an increase in PLLA block length. This effect was explained by the change in the conformation of PEO chains forming the micellar corona because of their overcrowding. Force spectroscopy experiments also reveal a more stretched conformation of the PEO chains for the block copolymers with a shorter PLLA block. A model describing the structure of the individual micelles and their clusters was proposed.

Luminescent Organic Semiconducting Langmuir Monolayers.

In recent years, monolayer organic field-effect devices such as transistors and sensors have demonstrated their high potential. In contrast, monolayer electroluminescent organic field-effect devices are still in their infancy. One of the key challenges here is to create an organic material that self-organizes in a monolayer and combines efficient charge transport with luminescence. Herein, we report a novel organosilicon derivative of oligothiophene-phenylene dimer D2-Und-PTTP-TMS (D2, tetramethyldisiloxane; Und, undecylenic spacer; P, 1,4-phenylene; T, 2,5-thiophene; TMS, trimethylsilyl) that meets these requirements. The self-assembled Langmuir monolayers of the dimer were investigated by steady-state and time-resolved photoluminescence spectroscopy, atomic force microscopy, X-ray reflectometry, and grazing-incidence X-ray diffraction, and their semiconducting properties were evaluated in organic field-effect transistors. We found that the best uniform, fully covered, highly ordered monolayers were semiconducting. Thus, the ordered two-dimensional (2D) packing of conjugated organic molecules in the semiconducting Langmuir monolayer is compatible with its high-yield luminescence, so that 2D molecular aggregation per se does not preclude highly luminescent properties. Our findings pave the way to the rational design of functional materials for monolayer organic light-emitting transistors and other optoelectronic devices.

Structure of ß-chitin from Berryteuthis magister and its transformation during whisker preparation and polymerization filling.

Models for the structures of the ß-chitin-protein complex of native and deproteinized squid pen (Berryteuthis magister) based on SAXS and WAXS data are proposed. Chitin fibrils of 25 Å in diameter and persistence length of 1200 Å are immersed in protein matrix. Average distance between fibrils is 42 Å. Deproteinization of the squid pen led to disappearance of the lateral fibril order stabilized by the protein matrix of the native sample. Swelling in water and acrylic acid resulted in an increase in the chitin 010 D-spacing to 14 and 18 Å, respectively. A preparation routine for individual chitin nanofibers of few microns in length and with diameter of 40-60 Å has been developed. During exfoliation of the chitin in acrylic acid the degree of acetylation does not change. Chitin-based nanocomposites can be prepared by polymerization of acrylic acid in swelled deproteinized samples which takes place mainly in the interfibrillar space of ß-chitin mainly.

Easily processable highly ordered Langmuir-Blodgett films of quaterthiophene disiloxane dimer for monolayer organic field-effect transistors.

Self-assembly of highly soluble water-stable tetramethyldisiloxane-based dimer of α,α'-dialkylquaterthiophene on the water-air interface was investigated by Langmuir, grazing incidence X-ray diffraction, and X-ray reflectivity techniques. The conditions for formation of very homogeneous crystalline monolayer Langmuir-Blodgett (LB) films of the oligomer were found. Monolayer organic field-effect transistors (OFETs) based on these LB films as a semiconducting layer showed hole mobilities up to 3 × 10(-3) cm(2)/(V s), on-off ratio of 10(5), small hysteresis, and high long-term stability. The electrical performance of the LB films studied is close to that for the same material in the bulk or in the monolayer OFETs prepared from water vapor sensitive chlorosilyl derivatives of quaterthiophene by self-assembling from solution. These findings show high potential of disiloxane-based LB films in monolayer OFETs for large-area organic electronics.

The effect of the shape of the mesogenic group on the structure and phase behavior of 2,3,4-tris(dodecyloxy)benzenesulfonates with alkaline cations.

Synthesis and mesophase structure characterisation are reported for a group of alkali salts of 2,3,4-tris(dodecyloxy)benzenesulfonic acid. As revealed by a combination of polarizing optical microscopy, differential scanning calorimetry and X-ray scattering, variation of the effective mesogen shape due to changes of the cation size leads to systematic transformation of the materials' phase behaviour. Thermotropic mesophases of different types and dimensionalities were observed: 1D (smectic bilayers), 2D (ordered and disordered columnar phases), and 3D (high-temperature micellar mesomorphic phase, low-temperature crystalline one). Cubic packing prevails when the cation size is small and, thus, the effective mesogen shape is close to the conic one. With increasing ion size, the mesogen shape becomes more tapered, and columnar mesophases appear to be more stable.

Formation of self-assembled organosilicon-functionalized quinquethiophene monolayers by fast processing techniques.

Different techniques for a relatively fast self-assembled monolayer film formation such as Langmuir-Blodgett (LB), spin-coating, and dip-coating methods have been compared using chloro[11-(5''''-ethyl-2,2':5',2″:5''',2''':5''',2''''-quinquethiophene-5-yl)undecyl]dimethylsilane as a reactive precursor. It was shown that both spin-coating and LB techniques are very promising methods for preparation of highly ordered monolayer films of organosilicon-functionalized quinquethiophene with vertical orientation of oligothiophene fragments, while dip-coating gives only partial coverage. Optimal conditions for complete filling out the substrate surface by the quinquethiophene-containing monolayer by spin-coating and LB methods have been found. Grazing incidence X-ray diffraction measurements confirmed formation of in-plane crystalline order within the monolayer film. Changes in the layer structure were established by X-ray reflectivity and grazing incidence X-ray diffraction methods.