Electroanalytical Strategies for Local pH Sensing at Solid-Liquid Interfaces and Biointerfaces.

Obtaining analytical information about chemical species at interfaces is fundamentally important to improving our understanding of chemical reactions and biological processes. pH at solid-liquid interfaces is found to deviate from the bulk solution value, for example, in electrocatalytic reactions at surfaces or during the corrosion of metals. Also, in the vicinity of living cells, metabolic reactions or cellular responses cause changes in pH at the extracellular interface. In this review, we collect recent progress in the development of sensors with the capability to detect pH at or close to solid-liquid and bio interfaces, with spatial and time resolution. After the two main principles of pH detection are presented, the different classes of molecules and materials that are used as active components in these sensors are described. The review then focuses on the reported electroanalytical techniques for local pH sensing. As application examples, we discuss model studies that exploit local pH sensing in the area of electrocatalysis, corrosion, and cellular interfaces. We conclude with a discussion of key challenges for wider use of this analytical approach, which shows promise to improve the mechanistic understanding of reactions and processes at realistic interfaces.

Redox-triggered debonding of mussel-inspired pressure sensitive adhesives: Improving efficiency through functional design.

Debondable pressure-sensitive adhesives (PSAs) promise access to recyclability in microelectronics in the transition toward a circular economy. Two PSAs were synthesized from a tetravalent thiol star-polyester forming thiol-catechol-connectivities (TCC) with either biorelated DiDopa-bisquinone (BY*Q) or fossil-based bisquinone A (BQA). The PSAs enable debonding by oxidation of TCC-catechols to quinones. The extent of debonding efficiency depends on the interaction modes, which are determined by the chemical structure differences of both TCC-motifs. BY*Q-TCC-PSA debonds with exceptional loss of 99% of its approx. 2 MPa shear strength. For BQA-TCC-PSA, a debonding efficiency of only approx. 60% was found, irrespective of its initial shear strength, which could be tuned up to approx. 7 MPa. The efficiency of debonding for BY*Q-TCC-PSA after TCC-oxidation is linked to the loss of synergistic interactions without strongly affecting the bulk glue properties, outperforming the purely catechol-based BQA-analogue.

Real-Time Monitoring of Cell Adhesion onto a Soft Substrate by a Graphene Impedance Biosensor.

Soft substrates are interesting for many applications, ranging from mimicking the cellular microenvironment to implants. Conductive electrodes on such substrates allow the realization of flexible, elastic, and transparent sensors. Single-layer graphene as a candidate for such electrodes brings the advantage that the active area of the sensor is transparent and conformal to the underlying substrate. Here, we overcome several challenges facing the routine realization of graphene cell sensors on a canonical soft substrate, namely, poly(dimethylsiloxane) (PDMS). We have systematically studied the effect of surface energy before, during, and after the transfer of graphene. Thus, we have identified a suitable support polymer, optimal substrate (pre)treatment, and an appropriate solvent for the removal of the support. Using this procedure, we can reproducibly obtain stable and intact graphene sensors on a millimeter scale on PDMS, which can withstand continuous measurements in cell culture media for several days. From local nanomechanical measurements, we infer that the softness of the substrate is slightly affected after the graphene transfer. However, we can modulate the stiffness using PDMS with differing compositions. Finally, we show that graphene sensors on PDMS can be successfully used as soft electrodes for real-time monitoring of the cell adhesion kinetics. The routine availability of single-layer graphene electrodes on a soft substrate with tunable stiffness will open a new avenue for studies, where the PDMS-liquid interface is made conducting with minimal alteration of the intrinsic material properties such as softness, flexibility, elasticity, and transparency.

Electrochemistry at the Edge of a van der Waals Heterostructure.

Artificial van der Waals heterostructures, obtained by stacking two-dimensional (2D) materials, represent a novel platform for investigating physicochemical phenomena and applications. Here, the electrochemistry at the one-dimensional (1D) edge of a graphene sheet, sandwiched between two hexagonal boron nitride (hBN) flakes, is reported. When such an hBN/graphene/hBN heterostructure is immersed in a solution, the basal plane of graphene is encapsulated by hBN, and the graphene edge is exclusively available in the solution. This forms an electrochemical nanoelectrode, enabling the investigation of electron transfer using several redox probes, e.g., ferrocene(di)methanol, hexaammineruthenium, methylene blue, dopamine and ferrocyanide. The low capacitance of the van der Waals edge electrode facilitates cyclic voltammetry at very high scan rates (up to 1000 V s-1), allowing voltammetric detection of redox species down to micromolar concentrations with sub-second time resolution. The nanoband nature of the edge electrode allows operation in water without added electrolyte. Finally, two adjacent edge electrodes are realized in a redox-cycling format. All the above-mentioned phenomena can be investigated at the edge, demonstrating that nanoscale electrochemistry is a new application avenue for van der Waals heterostructures. Such an edge electrode will be useful for studying electron transfer mechanisms and the detection of analyte species in ultralow sample volumes.

Statistical Copolymers that Mimic Aspects of Mussel Adhesive Proteins: Access to Robust Adhesive-Domains for Non-Covalent Surface PEGylation.

Reconstructing functional sequence motifs of proteins, using statistical copolymers greatly reduces the information content, but simplifies synthesis significantly. Key amino acid residues involved in the adhesion of mussel foot proteins are identified. The side-chain functionalities of Dopa, lysine, and arginine are abstracted and incorporated into acrylate monomers to allow controlled radical polymerization. The resulting Dopa-acrylate (Y*-acr), arginine-acrylate (R-acr), and lysine-acrylate (K-acr) monomers are polymerized in different monomer ratios and compositions by reversible addition fragmentation transfer polymerization with a poly(ethylene glycol) (PEG) macrochain transfer agent. This results in two sets of PEG-block-copolymers with statistical mixtures and different monomer ratios of catechol/primary amine and catechol/guanidine side-chain functionalities, both important pairs for mimicking π-cation interactions. The coating behavior of these PEG-block-copolymers is evaluated using quartz crystal microbalance with dissipation energy monitoring (QCM-D), leading to non-covalent PEGylation of the substrates with clear compositional optima in the coating stability and antifouling properties. The coatings prevent non-reversible albumin or serum adsorption, as well as reduce cellular adhesion and fungal spore attachment.

Photoactive Yellow Protein Adsorption at Hydrated Polyethyleneimine and Poly-l-Glutamic Acid Interfaces.

Chiral and achiral vibrational sum-frequency generation (VSFG) spectroscopy was performed in the 1400-1700 and 2800-3800 cm-1 range to study the interfacial structure of photoactive yellow protein (PYP) adsorbed on polyethyleneimine (PEI) and poly-l-glutamic acid (PGA) surfaces. Nanometer-thick polyelectrolyte layers served as the substrate for PYP adsorption, with 6.5-pair layers providing the most homogeneous surfaces. When the topmost material was PGA, it acquired a random coil structure with a small number of ß2-fibrils. Upon adsorption on oppositely charged surfaces, PYP yielded similar achiral spectra. However, the VSFG signal intensity increased for PGA surfaces with a concomitant redshift of the chiral Cα-H and N-H stretching bands, suggesting increased adsorption for PGA compared to PEI. At low wavenumbers, both the backbone and the side chains of PYP induced drastic changes to all measured chiral and achiral VSFG spectra. Decreasing ambient humidity led to the loss of tertiary structure with a re-orientation of α-helixes, evidenced by a strongly blue-shifted chiral amide I band of the ß-sheet structure with a shoulder at 1654 cm-1. Our observations indicate that chiral VSFG spectroscopy is not only capable of determining the main type of secondary structure of PYP, i.e., ß-scaffold, but is also sensitive to tertiary protein structure.

Graphene-on-gold surface plasmon resonance sensors resilient to high-temperature annealing.

Gold films coated with a graphene sheet are being widely used as sensors for the detection of label-free binding interactions using surface plasmon resonance (SPR). During the preparation of such sensors, it is often essential to subject the sensor chips to a high-temperature treatment in order to ensure a clean graphene surface. However, sensor chips used currently, which often use chromium as an adhesion promoter, cannot be subjected to temperatures above 250 °C, because under such conditions, chromium is found to reorganize and diffuse to the surface, where it is easily oxidized, impairing the quality of SPR spectra. Here we present an optimized preparation strategy involving a three-cycle tempering coupled with chromium (oxide) etching, which allows the graphene-coated SPR chips to be annealed up to 500 °C with little deterioration of the surface morphology. In addition, the treatment delivers a surface that shows a clear enhancement in spectral response together with a good refractive index sensitivity. We demonstrate the applicability of our sensors by studying the kinetics of avidin-biotin binding at different pH repeatedly on the same chip. The possibility to anneal can be exploited to recover the original surface after sensing trials, which allowed us to reuse the sensor for at least six cycles of biomolecule adsorption.

A highly durable graphene monolayer electrode under long-term hydrogen evolution cycling.

Achieving long term stability of single graphene sheets towards repeated electrochemical hydrogen evolution reaction (HER) cycling has been challenging. Here, we show through appropriate electrode preparation that it is possible to obtain highly durable isolated graphene electrodes, which can survive several hundreds of HER cycles with virtually no damage to the sp2-carbon framework and persistently good electron transfer characteristics.

Faradaic effects in electrochemically gated graphene sensors in the presence of redox active molecules.

Field-effect transistors (FETs) based on graphene are promising devices for the direct sensing of a range of analytes in solution. We show here that the presence of redox active molecules in the analyte solution leads to the occurrence of heterogeneous electron transfer with graphene generating a Faradaic current (electron transfer) in a FET configuration resulting in shifts of the Dirac point. Such a shift occurs if the Faradaic current is significantly high, e.g. due to a large graphene area. Furthermore, the redox shift based on the Faradaic current, reminiscent of a doping-like effect, is found to be non-Nernstian and dependent on parameters known from electrode kinetics in potentiodynamic methods, such as the electrode area, the standard potential of the redox probes and the scan rate of the gate voltage modulation. This behavior clearly differentiates this effect from other transduction mechanisms based on electrostatic interactions or molecular charge transfer doping effects, which are usually behind a shift of the Dirac point. These observations suggest that large-area unmodified/pristine graphene in field-effect sensors behaves as a non-polarized electrode in liquid. Strategies for ensuring a polarized interface are discussed.

Correction: pH sensitivity of interfacial electron transfer at a supported graphene monolayer.

Correction for 'pH sensitivity of interfacial electron transfer at a supported graphene monolayer' by Michel Wehrhold et al., Nanoscale, 2019, DOI: 10.1039/c9nr05049c.

pH sensitivity of interfacial electron transfer at a supported graphene monolayer.

Electrochemical devices based on a single graphene monolayer are often realized on a solid support such as silicon oxide, glassy carbon or a metal film. Here, we show that, with graphene on insulating substrates, the kinetics of the electron transfer at graphene with various redox active molecules is dictated by solution pH for electrode reactions that are not proton dependent. We attribute the origin of this unusual phenomenon mainly to electrostatic effects between dissolved/dissociated redox species and the interfacial charge due to trace amounts of ionizable groups at the supported graphene-liquid interface. Cationic redox species show higher electron transfer rates at basic pH, while anionic species undergo faster electron transfer at acidic pH. Although this behavior is observed on graphene on three different insulating substrates, the strength of this effect appears to differ depending on the surface charge density of the underlying substrate. This finding has important implications for the design of electrochemical sensors and electrocatalysts based on graphene monolayers.

Selective electrochemical functionalization of the graphene edge.

We present a versatile and simple method using electrochemistry for the exclusive functionalization of the edge of a graphene monolayer with metal nanoparticles or polymeric amino groups. The attachment of metal nanoparticles allows us to exploit surface-enhanced Raman scattering to characterize the chemistry of both the pristine and the functionalized graphene edge. For the pristine patterned graphene edge, we observe the typical edge-related modes, while for the functionalized graphene edge we identify the chemical structure of the functional layer by vibrational fingerprinting. The ability to obtain single selectively functionalized graphene edges routinely on an insulating substrate opens an avenue for exploring the effect of edge chemistry on graphene properties systematically.

Interplay of non-uniform charge distribution on the electrochemical modification of graphene.

Graphene is considered a model material for surfaces because it is stable despite being composed of a single layer of carbon atoms. Although the thermal and electronic properties of graphene are well reported, the behavior of graphene sheets with the addition of charges to the structure is not well understood. Combining infrared spectroscopy, electrochemical analysis, and computational simulations, we report the effect of an electrochemically induced covalent anchoring of 4-carboxyphenyl (4-CP) units on the optical and electronic properties of graphene. Charges in graphene become concentrated at specific sites of the sheet when electrochemically perturbed and the functionalization occurs inhomogeneously along the graphene sheet. We observed that, when graphene is covalently functionalized, the resistance to heterogeneous electron transfer is increased by a factor of 1.4. Furthermore, scattering-type scanning near-field optical microscopy and atomic force microscopy show that the covalent functionalization affects drastically the optical and physical properties of the graphene/SiO2 system, especially the plasmon-phonon coupling after the functionalization. In addition, from these we infer that a comparatively higher degree of functionalization occurs near the electrode edges. These results are supported by computational simulations, which show that the covalent anchoring of 4-CP units weakens electron transfer because the charges are retained on the sp3-hybridized carbon atoms generated upon functionalization, suggesting that graphene properties are deeply influenced by the way the molecules are immobilized on its structure.

Binding Kinetics of Methylene Blue on Monolayer Graphene Investigated by Multiparameter Surface Plasmon Resonance.

In this paper, we study the interaction of a small dye molecule, namely, methylene blue (MB) with graphene surfaces using surface plasmon resonance (SPR). We show that by utilizing all of the parameters of the SPR angular dip and exploiting the fact that MB absorbs light at the operating wavelength, it is possible to detect the binding of small molecules that would otherwise not give a significant signal. The binding of MB to unmodified graphene is found to be stronger than that for gold. By studying the interaction at modified surfaces, we demonstrate that electrostatic effects play a dominant role in the binding of MB on to graphene. Furthermore, following the binding kinetics at various concentrations allows us to estimate apparent equilibrium binding and rate constants for the interaction of MB with graphene.

A primary battery-on-a-chip using monolayer graphene.

We present here a bottom-up approach for realizing on-chip on-demand batteries starting out with chemical vapor deposition-grown graphene. Single graphene monolayers contacted by electrode lines on a silicon chip serve as electrodes. The anode and cathode are realized by electrodeposition of zinc and copper respectively onto graphene, leading to the realization of a miniature graphene-based Daniell cell on a chip. The electrolyte is housed partly in a gel and partly in liquid form in an on-chip enclosure molded using a 3d printer or made out of poly(dimethylsiloxane). The realized batteries provide a stable voltage (∼1.1 V) for many hours and exhibit capacities as high as 15 µAh, providing enough power to operate a pocket calculator. The realized batteries show promise for deployment as on-chip power sources for autonomous systems in lab-on-a-chip or biomedical applications.

Real-Time Label-Free Direct Electronic Monitoring of Topoisomerase Enzyme Binding Kinetics on Graphene.

Monolayer graphene field-effect sensors operating in liquid have been widely deployed for detecting a range of analyte species often under equilibrium conditions. Here we report on the real-time detection of the binding kinetics of the essential human enzyme, topoisomerase I interacting with substrate molecules (DNA probes) that are immobilized electrochemically on to monolayer graphene strips. By monitoring the field-effect characteristics of the graphene biosensor in real-time during the enzyme-substrate interactions, we are able to decipher the surface binding constant for the cleavage reaction step of topoisomerase I activity in a label-free manner. Moreover, an appropriate design of the capture probes allows us to distinctly follow the cleavage step of topoisomerase I functioning in real-time down to picomolar concentrations. The presented results are promising for future rapid screening of drugs that are being evaluated for regulating enzyme activity.

Tuning the isoelectric point of graphene by electrochemical functionalization.

The ability to control the charge-potential landscape at solid-liquid interfaces is pivotal to engineer novel devices for applications in sensing, catalysis and energy conversion. The isoelectric point (pI)/point of zero charge (pzc) of graphene plays a key role in a number of physico-chemical phenomena occurring at the graphene-liquid interface. Supported by theory, we present here a methodology to identify the pI/pzc of (functionalized) graphene, which also allows for estimating the nature and extent of ion adsorption. The pI of bare graphene (as-prepared, chemical vapor deposition (CVD)-grown) is found to be less than 3.3, which we can continuously modify up to 7.5 by non-covalent electrochemical attachment of aromatic amino groups, preserving the favorable electronic properties of graphene throughout. Modelling all the observed results with detailed theory, we also show that specific adsorption of ions and the substrate play only an ancillary role in our capability to tune the pI of graphene.

Identifying chemical functionalization on individual carbon nanotubes and graphene by local vibrational fingerprinting.

Chemical functionalization of carbon nanotubes (CNTs) and graphene allows for fine-tuning their physical and chemical properties to realize fascinating new fundamental phenomena as well as exotic applications. A primary challenge in such endeavors is the need to identify the chemical nature of attached functionalities at a single-nano-object level in a spatially resolved manner. Here we report the vibrational fingerprinting of functional groups that are attached to individual CNTs and graphene flakes. In order to achieve this, we decorate noncovalently functionalized CNTs and graphene with nanoparticles, which leads to the appearance of Raman peaks that can be correlated with the vibrational modes characteristic of the functional groups with diffraction-limited spatial resolution. The presented strategy is generic enough to be extended to other chemical modification routes on a range of nanostructures and hence will allow for rapid characterization of chemical modification of individual (semi)conducting nanostructures.

Chemical vapor deposition of graphene on a "peeled-off" epitaxial Cu(111) foil: a simple approach to improved properties.

We present a simple approach to improving the quality of CVD grown graphene, exploiting a Cu(111) foil catalyst. The catalyst is epitaxially grown by evaporation on a single crystal sapphire substrate, thickened by electroplating, and peeled off. The exposed surface is atomically flat, easily reduced, and exclusively of (111) orientation. Graphene grown on this catalyst under atmospheric CVD conditions and without wet chemical prereduction produces single crystal domain sizes of several hundred micrometers in samples that are many centimeters in size. The graphene produced in this way can easily be transferred to other substrates using well-established techniques. We report mobilities extracted using field-effect (as high as 29 000 cm(2) V(-1) s(-1)) and Hall bar measurement (up to 10 100 cm(2) V(-1) s(-1)).

Rolling circle amplification-based detection of human topoisomerase I activity on magnetic beads.

A high-sensitivity assay has been developed for the detection of human topoisomerase I with single molecule resolution. The method uses magnetic sepharose beads to concentrate rolling circle products, produced by the amplification of DNA molecules circularized by topoisomerase I and detectable with a confocal microscope as single and discrete dots, once reacted with fluorescent probes. Each dot, corresponding to a single cleavage-religation event mediated by the enzyme, can be counted due to its high signal/noise ratio, allowing detection of 0.3pM enzyme and representing a valid method to detect the enzyme activity in highly diluted samples.