Polyacrylamide/sodium alginate/sodium chloride photochromic hydrogel with high conductivity, anti-freezing property and fast response for information storage and electronic skin.

Photochromic hydrogels have promising prospects in areas such as wearable device, information encryption technology, optoelectronic display technology, and electronic skin. However, there are strict requirements for the properties of photochromic hydrogels in practical engineering applications, especially in some extreme application environments. The preparation of photochromic hydrogels with high transparency, high toughness, fast response, colour reversibility, excellent electrical conductivity, and anti-freezing property remains a challenge. In this study, a novel photochromic hydrogel (PAAm/SA/NaCl-Mo7) was prepared by loading ammonium molybdate (Mo7) and sodium chloride (NaCl) into a dual-network hydrogel of polyacrylamide (PAAm) and sodium alginate (SA) using a simple one-pot method. PAAm/SA/NaCl-Mo7 hydrogel has excellent conductivity (175.9 S/cm), water retention capacity and anti-freezing properties, which can work normally at a low temperature of -28.4 °C. In addition, the prepared PAAm/SA/NaCl-Mo7 hydrogel exhibits fast response (<15 s), high transparency (>70 %), good toughness (maximum elongation up to 1500 %), good cyclic compression properties at high compressive strains (60 %), good biocompatibility (78.5 %), stable reversible discolouration and excellent sensing properties, which can be used for photoelectric display, information storage and motion monitoring. This work provides a new inspiration for the development of flexible electronic skin devices.

Maximizing performance and efficiency in 3D printing of polylactic acid biomaterials: Unveiling of microstructural morphology, and implications of process parameters and modeling of the mechanical strength, surface roughness, print time, and print energy for fused filament fabricated (FFF) bioparts.

Medical stents, artificial teeth, and grafts are just some of the many applications for additive manufacturing techniques like bio-degradable polylactic acid 3D printing. However, there are drawbacks associated with fused filament fabrication-fabricated objects, including poor surface quality, insufficient mechanical strength, and a lengthy construction time for even a relatively small object. Thus, this study aims to identify the finest polylactic acid 3D printing parameters to maximize print quality while minimizing energy use, print time, flexural and tensile strengths, average surface roughness, and print time, respectively. Specifically, the infill density, printing speed, and layer thickness are all variables that were selected. A full-central-composite design generated 20 samples to test the prediction models' experimental procedures. Validation trial tests were used to show that the experimental findings agreed with the predictions, and analysis of variance was used to verify the importance of the performance characteristics (ANOVA). At layer thickness = 0.26 mm, infill density = 84 %, and print speed = 68.87 mm/s, the following optimized values were measured for PLA: flexural strength = 70.1 MPa, tensile strength = 39.2 MPa, minimum surface roughness = 7.8 µm, print time = 47 min, and print energy = 0.18 kwh. Firms and clinicians may benefit from utilizing the developed, model to better predict the required surface characteristic for various aspects afore trials.

Complete biodegradation of fungicide carboxin and its metabolite aniline by Delftia sp. HFL-1.

Fungicide carboxin was commonly used in the form of seed coating for the prevention of smut, wheat rust and cotton damping-off, leading carboxin and its probable carcinogenic metabolite aniline to directly enter the soil with the seeds, causing residual pollution. In this study, a novel carboxin degrading strain, Delftia sp. HFL-1, was isolated. Strain HFL-1 could use carboxin as the carbon source for growth and completely degrade 50 mg/L carboxin and its metabolite aniline within 24 h. The optimal temperatures and pH for carboxin degrading by strain HFL-1 were 30 to 42 °C and 5 to 9, respectively. Furthermore, the complete mineralization pathway of carboxin by strain HFL-1 was revealed by High Resolution Mass Spectrometer (HRMS). Carboxin was firstly hydrolyzed into aniline and further metabolized into catechol through multiple oxidation processes, and finally converted into 4-hydroxy-2-oxopentanoate, a precursor of the tricarboxylic acid cycle. Genome sequencing revealed the corresponding degradation genes and cluster of carboxin. Among them, amidohydrolase and dioxygenase were key enzymes involved in the degradation of carboxin and aniline. The discovery of transposons indicated that the aniline degradation gene cluster in strain HFL-1 was obtained via horizontal transfer. Furthermore, the degradation genes were cloned and overexpressed. The in vitro test showed that the expressed degrading enzyme could efficiently degrade aniline. This study provides an efficient strain resource for the bioremediation of carboxin and aniline in contaminated soil, and further revealing the molecular mechanism of biodegradation of carboxin and aniline.

Comprehensive Review on Fabricating Bioactive Ceramic Bone Scaffold Using Vat Photopolymerization.

In recent years, bioactive ceramic bone scaffolds have drawn remarkable attention as an alternative method for treating and repairing bone defects. Vat photopolymerization (VP) is a promising additive manufacturing (AM) technique that enables the efficient and accurate fabrication of bioactive ceramic bone scaffolds. This review systematically reviews the research progress of VP-printed bioactive ceramic bone scaffolds. First, a summary and comparison of commonly used bioactive ceramics and different VP techniques are provided. This is followed by a detailed introduction to the preparation of ceramic suspensions and optimization of printing and heat treatment processes. The mechanical strength and biological performance of the VP-printed bioactive ceramic scaffolds are then discussed. Finally, current challenges and future research directions in this field are highlighted.

The design and evaluation of bionic porous bone scaffolds in fluid flow characteristics and mechanical properties.

BACKGROUND AND OBJECTIVE: At present, there is a lack of efficient modeling methods for bionic artificial bone scaffolds, and the tissue fluid/nutrient mass transport characteristics of bone scaffolds has not been evaluated sufficiently. This study aims to explore an effective and efficient modeling method for biomimetic porous bone scaffolds for biological three-dimensional printing based on the imitation of the histomorphological characteristics of human vertebral cancellous bone. The fluid mass transport and mechanical characteristics of the porous scaffolds were evaluated and compared with those of a human cancellous bone,and the relationship between the geometric parameters (e.g., the size, number, shape of pores and porosity) and the performence of biomimetic porous bone scaffolds are revealed. METHODS: The bionic modeling design method proposed in this study considers the biological characteristics of vertebral cancellous tissue and performs imitation and design of vertebrae-like two-dimensional slices images.It then reconstructs the slices layer-by-layer to form porous scaffolds with a three-dimensional reconstruction method, similar to computed tomography image reconstruction. By controlling the design parameters, this method can easily realize the formation of plate-like (femoral cancellous bone-like) or rod-like (vertebral cancellous bone-like) porous scaffolds. The flow characterization of porous structures was performed using the computational fluid simulation method. RESULTS: The flow characterization results showed that the permeability of the porous scaffolds and human bone was 10-8∼10-9m2,and when the porosity of the porous scaffolds was higher than 70%, the permeability was higher than that of human vertebrae with a porosity of 82%. The maximum shear stress of the designed porous scaffolds and human vertebra were less than 0.8Mpa, which was conducive to cell adhesion, cell migration, and cell differentiation. The results of 3D printing and mechanical testing showed good printability and reflected the relationship between the mechanical properties and design parameters. CONCLUSIONS: The design method proposed in this study has many controllable parameters, which can be adjusted to generate diversified functional porous structures to meet specific needs, increase the potential of bone scaffold design, and leave room for meeting the new requirements for bone scaffold characteristics in the future.