RESUMO
We report ultrabroadband two-dimensional electronic spectroscopy (2D ES) measurements obtained in the pump-probe geometry using conventional optics. A phase-stabilized Michelson interferometer provides the pump-pulse delay interval, τ1, necessary to obtain the excitation-frequency dimension. Spectral resolution of the probe beam provides the detection-frequency dimension, ω3. The interferometer incorporates active phase stabilization via a piezo stage and feedback from interference of a continuous-wave reference laser detected in quadrature. To demonstrate the method, we measured a well-characterized laser dye sample and obtained the known peak structure. The vibronic peaks are modulated as a function of the waiting time, τ2, by vibrational wave packets. The interferometer simplifies ultrabroadband 2D ES measurements and analysis.
RESUMO
A noncollinear optical parametric amplifier (NOPA) can produce few-cycle femtosecond laser pulses that are ideally suited for time-resolved optical spectroscopy measurements. However, the nonlinear-optical process giving rise to ultrabroadband pulses is susceptible to spatiotemporal dispersion problems. Here, we detail refinements, including chirped-pulse amplification (CPA) and pulse-front matching (PFM), that minimize spatiotemporal dispersion and thereby improve the properties of ultrabroadband pulses produced by a NOPA. The description includes a rationale behind the choices of optical and optomechanical components, as well as assessment protocols. We demonstrate these techniques using a 1 kHz, second-harmonic Ti:sapphire pump configuration, which produces â¼5-fs duration pulses that span from about 500 to 800 nm with a bandwidth of about 200 THz. To demonstrate the utility of the CPA-PFM-NOPA, we measure vibrational quantum beats in the transient-absorption spectrum of methylene blue, a dye molecule that serves as a reference standard.
RESUMO
Aggregates of conjugated organic molecules (i.e., dyes) may exhibit relatively large one- and two-exciton interaction energies, which has motivated theoretical studies on their potential use in quantum information science (QIS). In practice, one way of realizing large one- and two-exciton interaction energies is by maximizing the transition dipole moment (µ) and difference static dipole moment (Δd) of the constituent dyes. In this work, we characterized the electronic structure and excited-state dynamics of monomers and aggregates of four asymmetric polymethine dyes templated via DNA. Using steady-state and time-resolved absorption and fluorescence spectroscopy along with quantum-chemical calculations, we found the asymmetric polymethine dye monomers exhibited a large µ, an appreciable Δd, and a long excited-state lifetime (τp). We formed dimers of all four dyes and observed that one dye, Dy 754, displayed the strongest propensity for aggregation and exciton delocalization. Motivated by these results, we undertook a more comprehensive survey of Dy 754 dimer and tetramer aggregates using steady-state absorption and circular dichroism spectroscopy. Modeling these spectra revealed an appreciable excitonic hopping parameter (J). Lastly, we used femtosecond transient absorption spectroscopy to characterize τp of the dimer and tetramer, which we observed to be exceedingly short. This work revealed that asymmetric polymethine dyes exhibited µ, Δd, monomer τp, and J values promising for QIS; however, further work is needed to overcome excited-state quenching and achieve long aggregate τp.
RESUMO
DNA is a re-configurable, biological information-storage unit, and much remains to be learned about its heterogeneous structural dynamics. For example, while it is known that molecular dyes templated onto DNA exhibit increased photostability, the mechanism by which the structural dynamics of DNA affect the dye photophysics remains unknown. Here, we use femtosecond, two-dimensional electronic spectroscopy measurements of a cyanine dye, Cy5, to probe local conformations in samples of single-stranded DNA (ssDNA-Cy5), double-stranded DNA (dsDNA-Cy5), and Holliday junction DNA (HJ-DNA-Cy5). A line shape analysis of the 2D spectra reveals a strong excitation-emission correlation present in only the dsDNA-Cy5 complex, which is a signature of inhomogeneous broadening. Molecular dynamics simulations support the conclusion that this inhomogeneous broadening arises from a nearly degenerate conformer found only in the dsDNA-Cy5 complex. These insights will support future studies on DNA's structural heterogeneity.
Assuntos
Corantes Fluorescentes , Quinolinas , Corantes Fluorescentes/química , DNA/química , Carbocianinas/química , DNA de Cadeia SimplesRESUMO
Molecular (dye) aggregates are a materials platform of interest in light harvesting, organic optoelectronics, and nanoscale computing, including quantum information science (QIS). Strong excitonic interactions between dyes are key to their use in QIS; critically, properties of the individual dyes govern the extent of these interactions. In this work, the electronic structure and excited-state dynamics of a series of indolenine-based squaraine dyes incorporating dimethylamino (electron donating) and/or nitro (electron withdrawing) substituents, so-called asymmetric dyes, were characterized. The dyes were covalently tethered to DNA Holliday junctions to suppress aggregation and permit characterization of their monomer photophysics. A combination of density functional theory and steady-state absorption spectroscopy shows that the difference static dipole moment (Δd) successively increases with the addition of these substituents while simultaneously maintaining a large transition dipole moment (µ). Steady-state fluorescence and time-resolved absorption and fluorescence spectroscopies uncover a significant nonradiative decay pathway in the asymmetrically substituted dyes that drastically reduces their excited-state lifetime (τ). This work indicates that Δd can indeed be increased by functionalizing dyes with electron donating and withdrawing substituents and that, in certain classes of dyes such as these asymmetric squaraines, strategies may be needed to ensure long τ, e.g., by rigidifying the π-conjugated network.
RESUMO
Molecular excitons are useful for applications in light harvesting, organic optoelectronics, and nanoscale computing. Electronic energy transfer (EET) is a process central to the function of devices based on molecular excitons. Achieving EET with a high quantum efficiency is a common obstacle to excitonic devices, often owing to the lack of donor and acceptor molecules that exhibit favorable spectral overlap. EET quantum efficiencies may be substantially improved through the use of heteroaggregates-aggregates of chemically distinct dyes-rather than individual dyes as energy relay units. However, controlling the assembly of heteroaggregates remains a significant challenge. Here, we use DNA Holliday junctions to assemble homo- and heterotetramer aggregates of the prototypical cyanine dyes Cy5 and Cy5.5. In addition to permitting control over the number of dyes within an aggregate, DNA-templated assembly confers control over aggregate composition, i.e., the ratio of constituent Cy5 and Cy5.5 dyes. By varying the ratio of Cy5 and Cy5.5, we show that the most intense absorption feature of the resulting tetramer can be shifted in energy over a range of almost 200 meV (1600 cm-1). All tetramers pack in the form of H-aggregates and exhibit quenched emission and drastically reduced excited-state lifetimes compared to the monomeric dyes. We apply a purely electronic exciton theory model to describe the observed progression of the absorption spectra. This model agrees with both the measured data and a more sophisticated vibronic model of the absorption and circular dichroism spectra, indicating that Cy5 and Cy5.5 heteroaggregates are largely described by molecular exciton theory. Finally, we extend the purely electronic exciton model to describe an idealized J-aggregate based on Förster resonance energy transfer (FRET) and discuss the potential advantages of such a device over traditional FRET relays.
RESUMO
Molecular aggregates are of interest to a broad range of fields including light harvesting, organic optoelectronics, and nanoscale computing. In molecular aggregates, nonradiative decay pathways may emerge that were not present in the constituent molecules. Such nonradiative decay pathways may include singlet fission, excimer relaxation, and symmetry-breaking charge transfer. Singlet fission, sometimes referred to as excitation multiplication, is of great interest to the fields of energy conversion and quantum information. For example, endothermic singlet fission, which avoids energy loss, has been observed in covalently bound, linear perylene trimers and tetramers. In this work, the electronic structure and excited-state dynamics of dimers of a perylene derivative templated using DNA were investigated. Specifically, DNA Holliday junctions were used to template the aggregation of two perylene molecules covalently linked to a modified uracil nucleobase through an ethynyl group. The perylenes were templated in the form of monomer, transverse dimer, and adjacent dimer configurations. The electronic structure of the perylene monomers and dimers were characterized via steady-state absorption and fluorescence spectroscopy. Initial insights into their excited-state dynamics were gleaned from relative fluorescence intensity measurements, which indicated that a new nonradiative decay pathway emerges in the dimers. Femtosecond visible transient absorption spectroscopy was subsequently used to elucidate the excited-state dynamics. A new excited-state absorption feature grows in on the tens of picosecond timescale in the dimers, which is attributed to the formation of perylene anions and cations resulting from symmetry-breaking charge transfer. Given the close proximity required for symmetry-breaking charge transfer, the results shed promising light on the prospect of singlet fission in DNA-templated molecular aggregates.
Assuntos
Perileno , DNA , DNA Cruciforme , Imidas/química , UracilaRESUMO
Femtosecond laser pulses readily produce coherent quantum beats in transient-absorption spectra. These oscillatory signals often arise from molecular vibrations and therefore may contain information about the excited-state potential energy surface near the Franck-Condon region. Here, by fitting the measured spectra of two laser dyes to microscopic models of femtosecond coherence spectra (FCS) arising from molecular vibrations, we classify coherent quantum-beat signals as fundamentals or overtones and quantify their Huang-Rhys factors and anharmonicity values. We discuss the extracted Huang-Rhys factors in the context of quantum-chemical computations. This work solidifies the use of FCS for analysis of coherent quantum beats arising from molecular vibrations, which will aid studies of molecular aggregates and photosynthetic proteins.
Assuntos
Fotossíntese , Vibração , LasersRESUMO
Molecular excitons, which propagate spatially via electronic energy transfer, are central to numerous applications including light harvesting, organic optoelectronics, and nanoscale computing; they may also benefit applications such as photothermal therapy and photoacoustic imaging through the local generation of heat via rapid excited-state quenching. Here we show how to tune between energy transfer and quenching for heterodimers of the same pair of cyanine dyes by altering their spatial configuration on a DNA template. We assemble "transverse" and "adjacent" heterodimers of Cy5 and Cy5.5 using DNA Holliday junctions. We find that the transverse heterodimers exhibit optical properties consistent with excitonically interacting dyes and fluorescence quenching, while the adjacent heterodimers exhibit optical properties consistent with nonexcitonically interacting dyes and disproportionately large Cy5.5 emission, suggestive of energy transfer between dyes. We use transient absorption spectroscopy to show that quenching in the transverse heterodimer occurs via rapid nonradiative decay to the ground state (â¼31 ps) and that in the adjacent heterodimer rapid energy transfer from Cy5 to Cy5.5 (â¼420 fs) is followed by Cy5.5 excited-state relaxation (â¼700 ps). Accessing such drastically different photophysics, which may be tuned on demand for different target applications, highlights the utility of DNA as a template for dye aggregation.
Assuntos
DNA , Corantes Fluorescentes , DNA/química , Replicação do DNA , Transferência de Energia , Corantes Fluorescentes/química , Análise EspectralRESUMO
DNA-templated molecular (dye) aggregates are a novel class of materials that have garnered attention in a broad range of areas including light harvesting, sensing, and computing. Using DNA to template dye aggregation is attractive due to the relative ease with which DNA nanostructures can be assembled in solution, the diverse array of nanostructures that can be assembled, and the ability to precisely position dyes to within a few Angstroms of one another. These factors, combined with the programmability of DNA, raise the prospect of designer materials custom tailored for specific applications. Although considerable progress has been made in characterizing the optical properties and associated electronic structures of these materials, less is known about their excited-state dynamics. For example, little is known about how the excited-state lifetime, a parameter essential to many applications, is influenced by structural factors, such as the number of dyes within the aggregate and their spatial arrangement. In this work, we use a combination of transient absorption spectroscopy and global target analysis to measure excited-state lifetimes in a series of DNA-templated cyanine dye aggregates. Specifically, we investigate six distinct dimer, trimer, and tetramer aggregates-based on the ubiquitous cyanine dye Cy5-templated using both duplex and Holliday junction DNA nanostructures. We find that these DNA-templated Cy5 aggregates all exhibit significantly reduced excited-state lifetimes, some by more than 2 orders of magnitude, and observe considerable variation among the lifetimes. We attribute the reduced excited-state lifetimes to enhanced nonradiative decay and proceed to discuss various structural factors, including exciton delocalization, dye separation, and DNA heterogeneity, that may contribute to the observed reduction and variability of excited-state lifetimes. Guided by insights from structural modeling, we find that the reduced lifetimes and enhanced nonradiative decay are most strongly correlated with the distance between the dyes. These results inform potential tradeoffs between dye separation, excitonic coupling strength, and excited-state lifetime that motivate deeper mechanistic understanding, potentially via further dye and dye template design.
Assuntos
Corantes , Quinolinas , DNA , Replicação do DNA , DNA CruciformeRESUMO
Molecular excitons play a central role in natural and artificial light harvesting, organic electrònics, and nanoscale computing. The structure and dynamics of molecular excitons, critical to each application, are sensitively governed by molecular packing. Deoxyribonucleic acid (DNA) templating is a powerful approach that enables controlled aggregation via sub-nanometer positioning of molecular dyes. However, finer sub-Angstrom control of dye packing is needed to tailor excitonic properties for specific applications. Here, we show that adding rotaxane rings to squaraine dyes templated with DNA promotes an elusive oblique packing arrangement with highly desirable optical properties. Specifically, dimers of these squaraine:rotaxanes exhibit an absorption spectrum with near-equal intensity excitonically split absorption bands. Theoretical analysis indicates that the transitions are mostly electronic in nature and only have similar intensities over a narrow range of packing angles. Compared with squaraine dimers, squaraine:rotaxane dimers also exhibit extended excited-state lifetimes and less structural heterogeneity. The approach proposed here may be generally useful for optimizing excitonic materials for a variety of applications ranging from solar energy conversion to quantum information science.
RESUMO
Molecular excitons play a central role in natural and artificial light harvesting, organic electronics, and nanoscale computing. The structure and dynamics of molecular excitons, critical to each application, are sensitively governed by molecular packing. Deoxyribonucleic acid (DNA) templating is a powerful approach that enables controlled aggregation via sub-nanometer positioning of molecular dyes. However, finer sub-Angstrom control of dye packing is needed to tailor excitonic properties for specific applications. Here, we show that adding rotaxane rings to squaraine dyes templated with DNA promotes an elusive oblique packing arrangement with highly desirable optical properties. Specifically, dimers of these squaraine:rotaxanes exhibit an absorption spectrum with near-equal intensity excitonically split absorption bands. Theoretical analysis indicates that the transitions are mostly electronic in nature and only have similar intensities over a narrow range of packing angles. Compared with squaraine dimers, squaraine:rotaxane dimers also exhibit extended excited-state lifetimes and less structural heterogeneity. The approach proposed here may be generally useful for optimizing excitonic materials for a variety of applications ranging from solar energy conversion to quantum information science.
RESUMO
Exciton delocalization plays a prominent role in the photophysics of molecular aggregates, ultimately governing their particular function or application. Deoxyribonucleic acid (DNA) is a compelling scaffold in which to template molecular aggregates and promote exciton delocalization. As individual dye molecules are the basis of exciton delocalization in molecular aggregates, their judicious selection is important. Motivated by their excellent photostability and spectral properties, here, we examine the ability of squaraine dyes to undergo exciton delocalization when aggregated via a DNA Holliday junction (HJ) template. A commercially available indolenine squaraine dye was chosen for the study given its strong structural resemblance to Cy5, a commercially available cyanine dye previously shown to undergo exciton delocalization in DNA HJs. Three types of DNA-dye aggregate configurations-transverse dimer, adjacent dimer, and tetramer-were investigated. Signatures of exciton delocalization were observed in all squaraine-DNA aggregates. Specifically, strong blue shift and Davydov splitting were observed in steady-state absorption spectroscopy and exciton-induced features were evident in circular dichroism (CD) spectroscopy. Strongly suppressed fluorescence emission provided additional, indirect evidence for exciton delocalization in the DNA-templated squaraine dye aggregates. To quantitatively evaluate and directly compare the excitonic Coulombic coupling responsible for exciton delocalization, the strength of excitonic hopping interactions between the dyes was obtained by simultaneously fitting the experimental steady-state absorption and CD spectra via a Holstein-like Hamiltonian, in which, following the theoretical approach of Kühn, Renger, and May, the dominant vibrational mode is explicitly considered. The excitonic hopping strength within indolenine squaraines was found to be comparable to that of the analogous Cy5 DNA-templated aggregate. The squaraine aggregates adopted primarily an H-type (dyes oriented parallel to each other) spatial arrangement. Extracted geometric details of the dye mutual orientation in the aggregates enabled a close comparison of aggregate configurations and the elucidation of the influence of dye angular relationship on excitonic hopping interactions in squaraine aggregates. These results encourage the application of squaraine-based aggregates in next-generation systems driven by molecular excitons.
Assuntos
Ciclobutanos , DNA Cruciforme , Fluorescência , FenóisRESUMO
Compared with experimental spectra, calculations for conjugated phenyl and thiophene oligomers tend to overestimate the ground state Raman intensities of higher-frequency vibrations (1200-1800 cm-1) relative to the intensities at lower frequencies (<1200 cm-1). The discrepancy was observed in previous benchmarking work that examined the method dependence of the calculated Raman spectra for a series of aromatic molecules. This paper further investigates the nature of the discrepancy by examining the role of anharmonic corrections and the dependence of the calculated Raman spectra on the inter-ring torsion angle for the representative molecules biphenyl (BP), 2-phenylthiophene (PT), and 2,2'-bithiophene (BT). Perturbative anharmonic corrections to the spectra calculated using density functional theory (DFT) provide only slightly better agreement with experiment. On the other hand, calculations at larger torsion angles give up to 30% improvement in the relative Raman intensities compared with the spectra calculated at the optimized geometries. The torsion-angle dependence of the Raman intensities is most pronounced for delocalized C-C and C-S stretching modes, and less pronounced for bending and ring distortion modes that do not involve inter-ring stretching. Higher-level calculations using the coupled cluster with single, double, and perturbative triple excitations [CCSD(T)] method indicate that DFT underestimates the energy barrier for torsion isomerization at small angles, and it overestimates the barriers at large angles, thus predicting minimum geometries at torsion angles that are too small. Therefore, the results suggest that the discrepancy in relative Raman intensities may be related to an overestimation of inter-ring conjugation by DFT, which also tends to favor geometries that are too planar.
RESUMO
In this work, we compare calculated and experimental off-resonance Raman spectra for a series of substituted benzene and thiophene derivatives in the ground state. We benchmark a variety of approximate density functionals following the "Jacob's Ladder" hierarchy of chemical accuracy, as well as second-order Møller-Plesset perturbation theory. The Raman calculations at all levels of theory consistently overestimate the intensities of high-frequency vibrations relative to the lower frequency region of the spectrum. Although all methods provide comparable estimates of relative intensities for all compounds, the hybrid B3LYP and TPSSh functionals perform 5-19% better than the other methods in terms of mean unsigned error and 2-24% better in the standard deviation of the error. Both functionals also give band positions accurate to within about ±10 cm-1 of the experimental frequencies.
RESUMO
Femtosecond stimulated Raman scattering (FSRS) is a spectroscopic technique that probes the structural dynamics of molecules. The technique typically relies on an electronic resonance condition to increase signal strength or enhance species selectivity, giving a Raman enhancement that is vibrational-mode-specific and depends on the character of the resonant electronic state. The resonance condition is complicated for molecules already in an excited electronic state and also for systems where multiple electronic states are resonant or nearly resonant with the Raman excitation energy, both of which are often the case for FSRS. This paper examines the excitation wavelength dependence of the FSRS spectrum for the lowest triplet state of 2-phenylthiophene (PT). Except for an overall increase of the signal strength due to the resonance condition, the relative intensities of most Raman bands are relatively insensitive to the excitation wavelength, and the spectrum is remarkably similar to the calculated off-resonance spectrum obtained by neglecting the resonance condition. On the other hand, calculated resonance Raman spectra using a gradient approximation to simulate the resonance condition correctly predict the excitation wavelength dependence for a few modes but overestimate the relative enhancement of others. The weak wavelength dependence of the triplet spectrum of PT contrasts the case of the singlet FSRS spectrum for the same molecule. We attribute this discrepancy to a combination of homogeneous broadening, overlapping TN â T1 transitions, and possibly vibronic coupling among states in the triplet manifold. This work highlights important limitations in using standard approaches to simulate excited-state resonance Raman spectra.
RESUMO
Femtosecond stimulated Raman scattering (FSRS) measurements typically probe the structural dynamics of a molecule in the first electronically excited state, S1. While these measurements often rely on an electronic resonance condition to increase signal strength or enhance species selectivity, the effects of the resonance condition are usually neglected. However, mode-specific enhancements of the vibrational transitions in an FSRS spectrum contain detailed information about the resonant (upper) electronic state. Analogous to ground-state resonance Raman spectroscopy, the relative intensities of the Raman bands reveal displacements of the upper potential energy surface due to changes in the bonding pattern upon S n â S1 electronic excitation, and therefore provide a sensitive probe of the ultrafast dynamics in the higher-lying state, S n. Raman gain profiles from the wavelength-dependent FSRS spectrum of the model compound 2,5-diphenylthiophene (DPT) reveal several modes with large displacement in the upper potential energy surface, including strong enhancement of a delocalized C-S-C stretching and ring deformation mode. The experimental results provide a benchmark for comparison with calculated spectra using time-dependent density functional theory (TD-DFT) and equation-of-motion coupled-cluster theory with single and double excitations (EOM-CCSD), where the calculations are based on the time-dependent formalism for resonance Raman spectroscopy. The simulated spectra are obtained from S1-S n transition strengths and the energy gradients of the upper (S n) potential energy surfaces along the S1 normal mode coordinates. The experimental results provide a stringent test of the computational approach, and indicate important limitations based on the level of theory and basis set. This work provides a foundation for making more accurate assignments of resonance-enhanced excited-state Raman spectra, as well as extracting novel information about higher-lying excited states in the transient absorption spectrum of a molecule.
RESUMO
Femtosecond stimulated Raman scattering (FSRS) probes the structural dynamics of molecules in electronically excited states by following the evolution of the vibrational spectrum. Interpreting the dynamics requires accurate assignments to connect the vibrational bands with specific nuclear motions of an excited molecule. However, the assignment of FSRS signals is often complicated by mode-specific resonance enhancement effects that are difficult to calculate for molecules in electronically excited states. We present benchmark results for a series of eight aryl-substituted thiophene derivatives to show that calculated off-resonance Raman spectra can be used to assign experimental bands on the basis of a comparison of structurally similar compounds and careful consideration of the resonance condition. Importantly, we show that direct comparison with the off-resonant calculations can lead to incorrect assignments of the experimental spectrum if the resonance condition is neglected. These results highlight the importance of resonance enhancement effects in assigning FSRS spectra.