Colloidal Self-Assembly of Silver Nanoparticle Clusters for Optical Metasurfaces.

Optical metasurfaces are two-dimensional assemblies of nanoscale optical resonators and could constitute the next generation of ultrathin optical components. The development of methods to manufacture these nanostructures on a large scale is still a challenge, while most performance demonstrations were obtained with lithographically fabricated metasurfaces that are restricted to small scales. Self-assembly fabrication routes are promising alternatives and have been used to produce original nanoresonators. Reports of self-assembled metasurface fabrication, however, are still scarce. Here, we show that an emulsion-based formulation approach can be used both for the fabrication of complex colloidal resonators, presenting a strong interaction with light, in particular due to simultaneous magnetic and electric modes of resonance, and for their deposition in homogeneous films. This fabrication technique involves emulsification of an aqueous suspension of silver nanoparticles in an oil phase, followed by controlled drying of the emulsion, and produces silver colloidal clusters. We show that the drying process can be controlled in a liquid emulsion, producing a metafluid, as well as in a sedimented emulsion, producing a metasurface. The structural control of the synthesized colloidal clusters is demonstrated with electron microscopy and X-ray scattering techniques. Using a polarization-resolved multiangle light scattering setup in the visible wavelength range, we conduct a comprehensive angular and spectroscopic study of the optical resonant scattering of the nanoresonators in a metafluid and show that they present strong optical magnetic resonances and directional forward-scattering patterns, with scattering efficiencies of up to 4. The metasurfaces consist of homogeneous films, of variable surface density, of colloidal clusters that have the same extinction properties on the surface and in the fluid. This experimental approach allows for large-scale production of metasurfaces.

An Ultra-Thin Near-Perfect Absorber via Block Copolymer Engineered Metasurfaces.

Producing ultrathin light absorber layers is attractive towards the integration of lightweight planar components in electronic, photonic, and sensor devices. In this work, we report the experimental demonstration of a thin gold (Au) metallic metasurface with near-perfect visible absorption (∼95 %). Au nanoresonators possessing heights from 5 - 15 nm with sub-50 nm diameters were engineered by block copolymer (BCP) templating. The Au nanoresonators were fabricated on an alumina (Al2O3) spacer layer and a reflecting Au mirror, in a film-coupled nanoparticle design. The BCP nanopatterning strategy to produce desired heights of Au nanoresonators was tailored to achieve near-perfect absorption at ≈ 600 nm. The experimental insight described in this work is a step forward towards realizing large area flat optics applications derived from subwavelength-thin metasurfaces.

Toward Huygens' Sources with Dodecahedral Plasmonic Clusters.

The design and chemical synthesis of plasmonic nanoresonators exhibiting a strong magnetic response in the visible is a key requirement to the realization of efficient functional and self-assembled metamaterials. However, novel applications like Huygens' metasurfaces or mu-near-zero materials require stronger magnetic responses than those currently reported. Our numerical simulations demonstrate that the specific dodecahedral morphology, whereby 12 silver satellites are located on the faces of a nanosized dielectric dodecahedron, provides sufficiently large electric and magnetic dipolar and quadrupolar responses that interfere to produce so-called generalized Huygens' sources, fulfilling the generalized Kerker condition. Using a multistep colloidal engineering approach, we synthesize highly symmetric plasmonic nanoclusters with a controlled silver satellite size and show that they exhibit a strong forward scattering that may be used in various applications such as metasurfaces or perfect absorbers.

Broadband Forward Light Scattering by Architectural Design of Core-Shell Silicon Particles.

A goal in the field of nanoscale optics is the fabrication of nanostructures with strong directional light scattering at visible frequencies. Here, the synthesis of Mie-resonant core-shell particles with overlapping electric and magnetic dipole resonances in the visible spectrum is demonstrated. The core consists of silicon surrounded by a lower index silicon oxynitride (SiOxNy) shell of an adjustable thickness. Optical spectroscopies coupled to Mie theory calculations give the first experimental evidence that the relative position and intensity of the magnetic and electric dipole resonances are tuned by changing the core-shell architecture. Specifically, coating a high-index particle with a low-index shell coalesces the dipoles, while maintaining a high scattering efficiency, thus generating broadband forward scattering. This synthetic strategy opens a route toward metamaterial fabrication with unprecedented control over visible light manipulation.

Tailored self-assembled nanocolloidal Huygens scatterers in the visible.

Existing nanocolloidal optical resonators exhibiting strong magnetic resonances often suffer from multi-step low yield synthesis methods as well as a limited tunability, particularly in terms of spectral superposition of electric and magnetic resonances, which is the cornerstone for achieving Huygens scatterers. To overcome these drawbacks, we have synthesized clusters of gold nanoparticles using an emulsion-based formulation approach. This fabrication technique involved emulsification of an aqueous suspension of gold nanoparticles in an oil phase, followed by controlled ripening of the emulsion. The structural control of the as synthesized clusters, of mean radius 120 nm and produced in large numbers, is demonstrated with microscopy and X-ray scattering techniques. Using a polarization-resolved multi-angle light scattering setup, we conduct a comprehensive angular and spectroscopic determination of their optical resonant scattering in the visible wavelength range. We thus report on the clear experimental evidence of strong optical magnetic resonances and directional forward scattering patterns. The clusters behave as strong Huygens sources. Our findings crucially show that the electric and magnetic resonances as well as the scattering patterns can be tuned by adjusting the inner cluster structure, modifying a simple parameter of the fabrication method. This experimental approach allows for the large scale production of nanoresonators with potential uses for Huygens metasurfaces.

Large area Al2O3-Au raspberry-like nanoclusters from iterative block-copolymer self-assembly.

In the field of functional nanomaterials, core-satellite nanoclusters have recently elicited great interest due to their unique optoelectronic properties. However, core-satellite synthetic routes to date are hampered by delicate and multistep reaction conditions and no practical method has been reported for the ordering of these structures onto a surface monolayer. Herein we show a reproducible and simplified thin film process to fabricate bimetallic raspberry nanoclusters using block copolymer (BCP) lithography. The fabricated inorganic raspberry nanoclusters consisted of a ∼36 nm alumina core decorated with ∼15 nm Au satellites after infusing multilayer BCP nanopatterns. A series of cylindrical BCPs with different molecular weights allowed us to dial in specific nanodot periodicities (from 30 to 80 nm). Highly ordered BCP nanopatterns were then selectively infiltrated with alumina and Au species to develop multi-level bimetallic raspberry features. Microscopy and X-ray reflectivity analysis were used at each fabrication step to gain further mechanistic insights and understand the infiltration process. Furthermore, grazing-incidence small-angle X-ray scattering studies of infiltrated films confirmed the excellent order and vertical orientation over wafer scale areas of Al2O3/Au raspberry nanoclusters. We believe our work demonstrates a robust strategy towards designing hybrid nanoclusters since BCP blocks can be infiltrated with various low cost salt-based precursors. The highly controlled nanocluster strategy disclosed here could have wide ranging uses, in particular for metasurface and optical based sensor applications.

Silicon-Based Dielectric Metamaterials: Focus on the Current Synthetic Challenges.

Metamaterials have optical properties that are unprecedented in nature. They have opened new horizons in light manipulation, with the ability to bend, focus, completely reflect, transmit, or absorb an incident wave front. Optically active metamaterials in particular could be used for applications ranging from 3D information storage to photovoltaic cells. Silicon (Si) particles are some of the most promising building blocks for optically active metamaterials, with high scattering efficiency coupled to low light absorption for visible frequencies. However, to date ideal Si building blocks cannot be produced by bulk synthesis techniques. The key is to find a synthetic route to produce Si building blocks between 75-200 nm in diameter of uniform size and shape, that are crystalline, have few impurities, and little to no porosity. This Review provides a theoretical background on Si optical properties for metamaterials, an overview of current synthetic methods and gives direction towards the most promising routes to ideal Si particles for metamaterials.

GoldHelix: Gold Nanoparticles Forming 3D Helical Superstructures with Controlled Morphology and Strong Chiroptical Property.

Plasmonic nanoparticles, particularly gold nanoparticles (GNPs) hold a great potential as structural and functional building blocks for three-dimensional (3D) nanoarchitectures with specific optical applications. However, a rational control of their assembly into nanoscale superstructures with defined positioning and overall arrangement still remains challenging. Herein, we propose a solution to this challenge by using as building blocks: (1) nanometric silica helices with tunable handedness and sizes as a matrix and (2) GNPs with diameter varying from 4 to 10 nm to prepare a collection of helical GNPs superstructures (called Goldhelices hereafter). These nanomaterials exhibit well-defined arrangement of GNPs following the helicity of the silica template. Strong chiroptical activity is evidenced by circular dichroism (CD) spectroscopy at the wavelength of the surface plasmon resonance (SPR) of the GNPs with a anisotropy factor (g-factor) of the order of 1 × 10-4, i.e., 10-fold larger than what is typically reported in the literature. Such CD signals were simulated using a coupled dipole method which fit very well the experimental data. The measured signals are 1-2 orders of magnitude lower than the simulated signals, which is explained by the disordered GNPs grafting, the polydispersity of the GNPs, and the dimension of the nanohelices. These Goldhelices based on inorganic templates are much more robust than previously reported organic-based chiroptical nanostructures, making them good candidates for complex hierarchical organization, providing a promising approach for light management and benefits in applications such as circular polarizers, chiral metamaterials, or chiral sensing in the visible range.

From Mesomorphic Phosphine Oxide to Clustomesogens Containing Molybdenum and Tungsten Octahedral Cluster Cores.

New clustomesogens (i.e., metal atom clusters containing liquid crystalline (LC) materials) have been obtained by grafting neutral cyanobiphenyl (CB)- or cholesteryl-containing tailor-made dendritic mesomorphic triphenylphosphine oxide ligands on luminescent (M6 Cl(i) 8 )(4+) octahedral cluster cores (M=Mo, W). The LC properties were studied by a combination of polarizing optical microscopy (POM), differential scanning calorimetry (DSC), and X-ray powder diffraction analyses. While the organic ligands showed various mesophase types ranging from nematic, SmA columnar (SmACol ), SmA, and SmC phases, it turned out that the corresponding clustomesogens formed layered phases (SmA) over a wide range of temperatures that depend on the nature and density of mesogenic groups employed. Intrinsic luminescence properties of the cluster precursors are preserved over the entire range of LC phase existence.

Topological darkness in self-assembled plasmonic metamaterials.

Self-assembled plasmonic metamaterials are fabricated from silver nanoparticles covered with a silica shell. These metamaterials demonstrate topological darkness or selective suppression of reflection connected to global properties of the Fresnel coefficients. The optical properties of the studied structures are in good agreement with effective medium theory. The results suggest a practical way of achieving high phase sensitivity in plasmonic metamaterials.

Bottom-up fabrication and optical characterization of dense films of meta-atoms made of core-shell plasmonic nanoparticles.

In an attempt to fabricate low index metamaterials by a bottom-up approach, meta-atoms constituted of silica-coated silver nanoparticles are assembled by a Langmuir-Schaefer technique into thin films of large area and well-controlled thickness. The silica shells ensure a constant distance between the silver cores, hence providing a constant coupling of the localized surface plasmon resonance (LSPR) of the nanoparticles in the assembled composite material. The optical response is studied by normal angle spectral reflectance measurements and by variable angle spectroscopic ellipsometry. The normal incidence data are described well in the framework of a single effective Lorentz oscillator model. The resonance of the assembled material is blue-shifted and shows no significant broadening with respect to the absorption band of the individual nanoparticles. The observation of these two effects is enabled by the core-shell structure of the meta-atoms that prevents aggregation of the metallic cores. The ellipsometry study confirms the general behavior and reveals the natural birefringence of the few-layer materials. The amplitude of the observed resonance is weaker than expected from the Maxwell-Garnett mixing rule. This well-characterized system may constitute a good model for numerical simulations.