The arthroscopic treatment of anterior shoulder instability with glenoid bone loss shows similar clinical results after Latarjet procedure and iliac crest autograft transfer.

PURPOSE: Recurrent anterior shoulder instability caused by critical bone loss of the glenoid is a challenging condition for shoulder surgeons. The purpose of this prospective multicenter trial was to compare the arthroscopic transfer of the coracoid process (Latarjet procedure) with the arthroscopic reconstruction of the glenoid using iliac crest autografts. METHODS: A prospective multi-center trial was performed in nine orthopaedic centres in Austria, Germany and Switzerland between July 2015 and August 2021. Patients were prospectively enrolled and received either an arthroscopic Latarjet procedure or an arthroscopic iliac crest graft transfer. Standardized follow-up after 6 months and mimimum 24 months included range of motion, Western Ontario stability index (WOSI), Rowe score and subjective shoulder value (SSV). All complications were recorded. RESULTS: 177 patients (group Latarjet procedure: n = 110, group iliac crest graft: n = 67) were included in the study. WOSI (n.s.), SSV (n.s.) and Rowe score (n.s.) showed no difference at final follow-up. 10 complications were seen in group Latarjet procedure and 5 in group iliac crest graft; the frequency of complications did not differ between the two groups (n.s.). CONCLUSION: The arthrosopic Latarjet procedure and arthroscopic iliac crest graft transfer lead to comparable results regarding clinical scores, frequency of recurrent dislocations and complication rates. LEVEL OF EVIDENCE: Level II.

Midterm results of stemless impaction shoulder arthroplasty for primary osteoarthritis: a prospective, multicenter study.

Background: Stemless shoulder arthroplasty using 4 open-fin press-fit anchors has been showing promising short-term clinical and radiographic results for patients' primary osteoarthritis. This prospective, multicenter study presents 5-year postoperative clinical and radiological outcomes of a stemless shoulder arthroplasty for primary osteoarthritis. Methods: Between November 2012 and December 2015, 100 patients were treated for primary osteoarthritis with the Sidus stem-free shoulder system at 7 European centers. Clinical assessment included the Constant-Murley Score, American Shoulder and Elbow Standardized Shoulder Assessment Form score, Subjective Shoulder Value, and range of motion. True anteroposterior, axial and lateral radiographs were reviewed for osteolysis, glenoid and humerus loosening, heterotopic ossification, radiolucent lines, component migration and humeral bone resorption. In addition to a Kaplan-Meier survival analysis, a comparative analysis between total shoulder arthroplasty and hemiarthroplasty was performed. Results: Seventy-one patients (36 females) with a mean age of 63.8 years (range: 47-79 years) were available for the 5-year clinical and radiographic follow-up (range: 52-79 months). There was a significant increase (P < .0001) in all outcome scores compared to baseline values. Patients with total shoulder arthroplasty (n = 48) achieved significantly better functional outcome than patients with shoulder hemiarthroplasty (n = 23) with regard to the absolute and relative Constant-Murley Score, American Shoulder and Elbow Standardized Shoulder Assessment Form score, and Subjective Shoulder Value as well as greater abduction strength and range of motion in forward elevation and external rotation (P ≤ .004). There were no cases of osteolysis or humeral loosening. There were some cases of heterotopic ossification (1.4%), radiolucency around the humerus (1.4%) or glenoid (25%), glenoid migration (2.1%), inferior osteophytes (1.4%) or humerus bone resorption (9.9%). The 5-year survival was 94%. Conclusion: Patients treated with the Sidus stem-free shoulder system for primary osteoarthritis continue to achieve good clinical and radiographic results without any signs of aseptic humeral implant loosening at 5 years postsurgery.

Open latarjet procedure versus all-arthroscopic autologous tricortical iliac crest bone grafting for anterior-inferior glenohumeral instability with glenoid bone loss.

PURPOSE: The purpose of this study is to compare the open Latarjet procedure versus the all-arthroscopic autologous tricortical iliac crest bone grafting (AICBG) technique for recurrent anterior-inferior glenohumeral instability with glenoid bone loss. METHODS: All open Latarjet and AICBG procedures for recurrent anterior-inferior shoulder instability with glenoid bone loss performed at two institutions between September 2015 and April 2019 were retrospectively analyzed. Inclusion criteria were a traumatic etiology, a glenoid surface deficiency >13.5%, and a minimum follow-up (FU) of 18 months. Primary outcomes included the subjective shoulder value, the Western Ontario Shoulder Instability (WOSI), Rowe scores including subdomains, and the four subdomains of the Constant score (pain, activities of daily living, internal rotation, external rotation). Secondary outcomes were subjective shoulder instability, EQ-5D-3 L, pain level on the VAS, level of overall satisfaction, operative time, return-to-work rate, and return-to-sports rate. RESULTS: Forty-three patients were available for final analysis (Latarjet: n = 21; AICBG: n = 22) at an average FU of 34.9 months (range, 22-66 months). Both techniques provided good outcomes and improved stability. The Rowe score, Rowe-range of motion, and CS-internal rotation (p = 0.008, p<0.001, p = 0.001) were slightly better in the AICBG group. Furthermore, the WOSI physical symptoms subdomain was significantly better (p = 0.04) in the AICBG group, while its total score did not reach statistical significance (p = 0.07). There was no statistically significant difference in the secondary outcomes besides operative time, which was significantly shorter in the Latarjet procedure group (p = 0.04). Overall complication rate was similar in both groups (Latarjet: 9.5% (n = 2), AICBG: 9.1% (n = 2)). CONCLUSION: Open Latarjet and AICBG procedures provide comparable clinical outcomes except for significantly better Rowe score, Rowe-range of motion, WOSI physical symptoms subdomain, and internal rotation capacity in the AICBG group. However, these results should be carefully interpreted in the context of known minimal clinically important differences of these scores.

Subscapularis management in stemless total shoulder arthroplasty: tenotomy versus peel versus lesser tuberosity osteotomy.

BACKGROUND: It is unknown whether subscapularis management technique has an influence on the outcomes and complications of stemless total shoulder arthroplasty. The purpose of this study, therefore, was to compare outcomes and complications between subscapularis tenotomy, peel, and lesser tuberosity osteotomy used during stemless shoulder arthroplasty. METHODS: We reviewed 188 stemless anatomic total shoulder arthroplasties and compared clinical and functional outcomes between those performed through a subscapularis tenotomy (n = 68), subscapularis peel (n = 65), or lesser tuberosity osteotomy (n = 55). Patients were followed up clinically and radiographically at 6 months, 1 year, and 2 years postoperatively. RESULTS: At 2 years postoperatively, no statistically significant differences in visual analog scale pain scores, American Shoulder and Elbow Surgeons scores, or patient-reported instability (P ≥ .19) were found between groups. Active external rotation was greater in the peel group (P = .006) than in the tenotomy group but was not different compared with the lesser tuberosity osteotomy group (P = .07). No statistically significant difference in clinical subscapularis failures was noted between groups (P = .11); however, 2 patients in the peel group sustained a subscapularis failure requiring reoperation. DISCUSSION: The results of this multicenter comparative analysis show that all 3 subscapularis management techniques are effective and safe in the short term when used with stemless anatomic total shoulder arthroplasty.

Sidus Stem-Free Shoulder System for primary osteoarthritis: short-term results of a multicenter study.

BACKGROUND: The aim of this prospective multicenter study was to evaluate clinical and radiologic results of a new metaphyseal anchored system. This system features a different anchor geometry that potentially leads to better bony integration and less loosening. METHODS: From November 2012 until December 2015, 148 patients (151 shoulders) were treated with the Sidus Stem-Free Shoulder System at 9 centers in Europe. The main indication was primary osteoarthritis (80.1%). This analysis only includes patients diagnosed with primary osteoarthritis (n = 121). A clinical evaluation was performed using the Constant-Murley score, Subjective Shoulder Value, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, and range of motion. Radiologic assessment was based on the occurrence of radiolucent lines and signs of implant migration, osteolysis, loosening, and heterotopic ossification. RESULTS: We evaluated 105 patients after a follow-up period of 2 years. There were 53 women and 52 men. The average age was 64 years. Total shoulder arthroplasty was performed in 73 cases and hemiarthroplasty in 32. The Constant-Murley score improved from 26 points preoperatively to 70 points at 2 years' follow-up (P < .001). The Subjective Shoulder Value increased from 34% to 84% (P < .001), and the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form increased from 34 points to 86 points (P < .001). Radiologically, neither migration nor loosening was found. However, radiolucent lines of 2 mm or greater could be detected around the glenoid in 2 cases, but none of them have had clinical relevance yet. The overall complication rate was 6.7%, and the revision rate was 0%. CONCLUSION: Patients with the Sidus Stem-Free Shoulder System achieve good clinical and radiologic short-term results that are comparable with the results of other stem-free shoulder implants.

High cell density cultivation of recombinant yeasts and bacteria under non-pressurized and pressurized conditions in stirred tank bioreactors.

This study demonstrates the applicability of pressurized stirred tank bioreactors for oxygen transfer enhancement in aerobic cultivation processes. The specific power input and the reactor pressure was employed as process variable. As model organism Escherichia coli, Arxula adeninivorans, Saccharomyces cerevisiae and Corynebacterium glutamicum were cultivated to high cell densities. By applying specific power inputs of approx. 48kWm(-3) the oxygen transfer rate of a E. coli culture in the non-pressurized stirred tank bioreactor was lifted up to values of 0.51moll(-1)h(-1). When a reactor pressure up to 10bar was applied, the oxygen transfer rate of a pressurized stirred tank bioreactor was lifted up to values of 0.89moll(-1)h(-1). The non-pressurized stirred tank bioreactor was able to support non-oxygen limited growth of cell densities of more than 40gl(-1) cell dry weight (CDW) of E. coli, whereas the pressurized stirred tank bioreactor was able to support non-oxygen limited growth of cell densities up to 225gl(-1) CDW of A. adeninivorans, 89gl(-1) CDW of S. cerevisiae, 226gl(-1) CDW of C. glutamicum and 110gl(-1) CDW of E. coli. Compared to literature data, some of these cell densities are the highest values ever achieved in high cell density cultivation of microorganisms in stirred tank bioreactors. By comparing the specific power inputs as well as the k(L)a values of both systems, it is demonstrated that only the pressure is a scaleable tool for oxygen transfer enhancement in industrial stirred tank bioreactors. Furthermore, it was shown that increased carbon dioxide partial pressures did not remarkably inhibit the growth of the investigated model organisms.

New method to determine the mass transfer resistance of sterile closures for shaken bioreactors.

In this paper a novel and easily applied method to measure the mass transfer resistance of the sterile closures (e.g. cotton plug) of shaken bioreactors is introduced. This method requires no investment in special equipment (e.g. an oxygen sensor) and can be performed with the materials usually available in typical laboratories. The method is based on the model of Henzler et al. (1986), which mechanistically describes mass transfer through the sterile closure of a shaken bioreactor based on diffusion coupled with Stefan convection. The concentration dependency of the multi-component diffusion coefficients is taken into account. The water loss from two equivalent shaken bioreactors equipped with sterile closures during several days of shaking is measured. One flask contains distilled water, the other a saturated salt solution. From the water evaporation rate in each of the two flasks, the new model presented calculates the relative humidity in the environment, the average diffusion coefficient of oxygen in the sterile closure (D(O2)), and the diffusion coefficient of carbon dioxide (D(CO2)) . The diffusion coefficient of carbon dioxide (D(CO2)) only depends on the density and material properties of the sterile closure and not on the gas concentrations and is, therefore, an ideal parameter for the characterization of the mass transfer resistance. This new method is validated experimentally by comparing the diffusion coefficient of oxygen (D(O2)) to a measurement by the classic dynamic method; and by comparing the calculated relative humidity in the environment to a humidity sensor measurement.