Surface roughness and cyclic fatigue resistance of a novel shaping system: An in-vitro study.

Recently developed Nickel-Titanium (NiTi) instruments with practical changes have resulted in safer instrumentation. In addition, topographical features on the file surface are a contributing factor to clinical durability. Therefore, this study aimed to investigate both the cyclic fatigue resistance and the roughness change of MTwo and Rotate instruments (VDW, Munich, Germany). Each instrument (n = 6/each group) was scanned with an atomic force microscopy prior to and after instrumentation. In addition, cyclic fatigue testing was conducted for each instrument (n = 11/each group) with stainless-steel blocks, including 45°-60°-90° degrees of curvature milled to the instruments' size. The roughness parameters increased for both systems after instrumentation (p<0.05). Both systems presented an increased roughness following instrumentation (p<0.05). The cyclic fatigue resistance was lowest at 90° for both systems (p<0.05), whereas the Rotate files presented a higher resistance than that of the Mtwo files (p<0.05). Compared to the Mtwo files, Rotate files presented better resistance, while the resistance decreased as the curvature increased.

Push-out bond strength of fiber posts to irradiated and non-irradiated intraradicular dentin.

OBJECTIVES: The aim of this study is to evaluate the influence of ionizing radiotherapy on the resin-dentin interface in endodontically treated teeth restored with fiber posts using a dual-cure resin cement performed with the etch-and-rinse (ER) and self-etch (SE) approaches in terms of push-out bond strength (MPa), and to analyze the post/cement/dentin interface using scanning electron microscopy (SEM). MATERIALS AND METHODS: Seventy-six single-rooted human teeth were used and randomly assigned into two main groups (n = 38): one non-irradiated group (NoRad) and one group subjected to a cumulative radiation dose of 60 Gy (Rad). All root canals were instrumented and were further subdivided into two subgroups (n = 19) following the adhesive approach: ER (RadER; NoRadER) and SE (RadSE; NoRadSE) used for fiber post luting with the universal adhesive and dual cure resin cement. Each root was sectioned perpendicularly to its long axis and sections from the middle third of the roots were chosen for SEM analysis and push-out bond strength test. Two-way ANOVA with post hoc Tukey tests and a dummy variable linear regression analysis were used for data analysis. RESULTS: Regardless of the adhesive approach, push-out bond strength in irradiated teeth resulted in significantly lower values than non-irradiated teeth (p = 0.0001). There were no significant differences between the ER and SE approaches in non-irradiated teeth (p = 0.955), whereas the ER approach showed significantly higher bond strengths than the SE approach in irradiated teeth (p = 0.0001). CONCLUSIONS: Ionizing radiotherapy resulted in dentin structure disruption and negatively affected the push-out bond strength of fiber posts to intraradicular dentin. The reduction in bond strength was also more significant with the SE approach than with the ER approach. CLINICAL RELEVANCE: The alterations resulting from root dentin irradiation seem to influence adhesive systems bond strength to dentin, as these changes contribute to lower push-out bond strength in irradiated groups before fiber post luting. Thus, clinicians should prepare patients with a reasonable restorative treatment plan prior to radiotherapy and simultaneously initiate a preventive program during radiotherapy.

Inadvertent apical extrusion of sodium hypochlorite with evaluation by dental volumetric tomography.

This case report describes the tissue injury caused by inadvertently extruded NaOCl through the apical constriction. A 56-year-old female patient with complaints of pain, swelling, and ecchymosis on the left side of her face was referred to our clinic. The symptoms had emerged following root canal treatment of the maxillary left first premolar, and a soft tissue complication due to apical extrusion of NaOCl was diagnosed. Antibiotics and analgesics were prescribed. DVT images revealed that the buccal root apex had perforated the maxillary bone. The patient was followed up every other day and became asymptomatic on the 10th day. Endodontic therapy was completed with routine procedures. Determining working length precisely and following irrigation protocols meticulously are indispensable to prevent this type of complication. 3D visualization of the affected area may reveal the cause of the incident.