A Modified Technique for Transcatheter Pulmonary Valve Implantation of SAPIEN 3 Valves in Large Right Ventricular Outflow Tract: A Matched Comparison Study.

INTRODUCTION: Percutaneous pulmonary valve implantation (PPVI) with a SAPIEN 3 valve is effective for treating treat right ventricle outflow (RVOT) dysfunction. A modified technique was developed without prestenting using a protective valve delivery method. We aimed to compare the procedural results of the modified technique group (MTG) to those of patients in a conventional technique group (CTG). METHODS: We designed a matched before-after study. All consecutive PPVI with SAPIEN 3 performed in the MTG over 9 months were matched, based on the RVOT type and size, to consecutive procedures performed previously with SAPIEN 3. RESULTS: A total of 54 patients were included, equally distributed in the two groups. The sizes of the SAPIEN 3 valves were 23 mm (n = 9), 26 mm (n = 9), 29 mm (n = 36). The two groups were similar regarding demographic data, RVOT type, and pre-procedure hemodynamics. PPVI was performed in a single procedure in all patients of the MTG, whereas six (22.2%) patients of the CTG group underwent prestenting as a first step and valve implantation later (p = 0.02). The procedures were successful in all cases. Stent embolization was reported in two patients (7.4%) in the CTG, which were impacted in pulmonary arteries. In one case (3.7%), in the MTG, an unstable 29 mm SAPIEN 3 valve was stabilized with two stents and additional valve-in-valve implantation. The hemodynamics results were good in all cases, without significant differences between the two groups. The procedures' durations and fluoroscopy times were significantly reduced in the MTG (48.1 versus 82.6 min, p < 0.0001; 15.2 versus 29.8 min, p = 0.0002). During follow-up, neither stent fracture nor valve dysfunction was noticed in either group. CONCLUSION: PPVI without prestenting and with a protective delivery method of the SAPIEN 3 valve significantly reduces the procedure's complexity, the duration, and the irradiation while maintaining excellent hemodynamics results in selected cases.

Safety and efficacy of the Amplatzer™ Trevisio™ intravascular delivery system: Post-approval study results.

BACKGROUND: The Amplatzer™ Trevisio™ Intravascular Delivery System (Trevisio DS; Abbott Laboratories, Chicago, IL, USA) facilitates the delivery of Amplatzer™ Occluders and features an ultraflexible tip, which improves assessment of occluder position before release. AIMS: To assess the safety and efficacy of the Trevisio DS for transcatheter closure of patent foramen ovale and atrial septal defect. METHODS: The Amplatzer™ Trevisio™ Intravascular Delivery System Post-Approval Study was a prospective, postmarket, single-arm, multicentre, observational study of the Trevisio DS. Enrolled patients were indicated for transcatheter closure of patent foramen ovale or atrial septal defect. In all procedures, the Trevisio DS was used to deliver Amplatzer™ Occluders. Technical success was defined as successful deployment and release of at least one occluder. Device- or procedure-related serious adverse events were tracked until discharge or day 7, whichever occurred earlier. RESULTS: The study enrolled 144 patients with patent foramen ovale and 107 patients with atrial septal defect at 22 European sites; 53 patients with atrial septal defect (49.6%) were aged<18years. The rate of technical success was 98.4% (97.2% for atrial septal defect, 99.3% for patent foramen ovale). There was one serious adverse event (0.4%), an acute periprocedural device embolization that occurred after occluder release in a patient with atrial septal defect; the device was retrieved percutaneously. This was determined by the implanter to be unrelated to the performance of the Trevisio DS. CONCLUSIONS: The Trevisio DS exhibited a high rate of technical success and an excellent safety profile during transcatheter closure of patent foramen ovale and atrial septal defect.

Transcatheter correction of sinus venosus defect in a patient with a challenging anatomical configuration: From bench testing to clinical success.

We report successful transcatheter correction of a sinus venosus defect in a 72-year-old woman with anomalous pulmonary venous return in a challenging anatomical configuration. The procedure was facilitated by hands-on simulation training on a newly developed, perfused, 3D-printed model.

Transcatheter Closure of Superior Sinus Venosus Defects.

Superior sinus venosus defect is a communication between the right and left atrium located above the upper margin of the oval fossa, immediately inferior to the junction of the superior vena cava and the right atrium. It is systematically associated with partial anomalous pulmonary venous drainage, especially of the right upper pulmonary vein. Surgical repair has been the gold standard approach to close that defect. Introduced in 2014, percutaneous closure has gradually become a safe and effective alternative to surgery in carefully selected patients, although worldwide experience remains limited. This article provides an appraisal of the patients' selection process and a step-by-step description of the procedure as well as a comprehensive review of its outcomes.

Long-term outcomes of transcatheter pulmonary valve implantation with melody and SAPIEN valves.

BACKGROUND: Transcatheter pulmonary valve implantation (TPVI) is effective for treating right ventricle outflow tract (RVOT) dysfunction. Factors associated with long-term valve durability remain to be investigated. METHODS: Consecutive patients successfully treated by TPVI with Melody valves (n = 32) and SAPIEN valves (n = 182) between 2008 and 2020 at a single tertiary centre were included prospectively and monitored. RESULTS: The 214 patients had a median age of 28 years (range, 10-81). The RVOT was a patched native pulmonary artery in 96 (44.8%) patients. Median follow-up was 2.8 years (range, 3 months-11.4 years). Secondary pulmonary valve replacement (sPVR) was performed in 23 cases (10.7%), due to stenosis (n = 22, 95.7%) or severe regurgitation (n = 1, 4.3%), yielding an incidence of 7.6/100 patient-years with melody valves and 1.3/100 patient-years with SAPIEN valves (P = 0.06). The 5- and 10-year sPVR-freedom rates were 78.1% and 50.4% with Melody vs. 94.3% and 82.2% with SAPIEN, respectively (P = 0.06). The incidence of infective endocarditis (IE) was 5.5/100 patient-years with Melody and 0.2/100 patient-years with SAPIEN (P < 0.0001). Factors associated with sPVR by univariate analysis were RV obstruction before TPVI (P = 0.04), transpulmonary maximal velocity > 2.7 m/s after TPVI (p = 0.0005), valve diameter ≤ 22 mm (P < 0.003), IE (P < 0.0001), and age < 25 years at TPVI (P = 0.04). By multivariate analysis adjusted for IE occurrence, transpulmonary maximal velocity remained associated with sPVR. CONCLUSIONS: TPVI is effective for treating RVOT dysfunction. Incidence of sPVR is higher in patients with residual RV obstruction or IE. IE add a substantial risk of TPVI graft failure and is mainly linked to the Melody valve. SOCIAL MEDIA ABSTRACT: Transcatheter pulmonary valve implantation is effective for treating right ventricular outflow tract dysfunction in patients with congenital heart diseases. Incidence of secondary valve replacement is higher in patients with residual obstruction or infective endocarditis.

Electric toy car to reduce anxiety before a cardiac catherisation: randomised controlled trial.

BACKGROUND: Anxiety before an invasive intervention is associated in children with persistent psychological disorders. We studied the effect of the transfer to the catheterisation room by an electric toy car on the anxiety of children and their parents before a cardiac catheterisation. METHODS: Forty-eight children with a median age of 5.6 years [4.2-7.0] were randomised to either riding on an electric car to go to the catheterisation laboratory or being transported lying supine on a gurney. Anxiety assessments were performed by a physician blinded to group allocation on the day before the procedure (T0) and at anaesthesia induction (T1). The modified Yale Preoperative Anxiety Scale Short Form (mYPAS-SF) and visual analogue scale for anxiety (VAS-A) were used in the children and the VAS-A in the parents. RESULTS: The mYPAS-SF, VAS-A-child, and the VAS-A-parent scores were significantly higher at T1 than at T0 (p < 0.001, p < 0.001, and p = 0.005, respectively). The primary outcome (the median mYPAS-SF score at T1) was not significantly different in the two groups when males and females were combined. At T1, the VAS-A-child score, however, was significantly lower in the intervention than the control group (22 versus 55, p < 0.001). In the boys, the median mYPAS-SF score at T1 was significantly lower in the intervention group (25.0 versus 51.0, p = 0.024). No difference was observed in girls. The VAS-A parent score was lower at T1 in the intervention group (60 versus 87, p = 0.05). CONCLUSION: Riding to the catheterisation laboratory on an electric toy car decreased anxiety in boys and decreased parental anxiety.

Cardiac tomography-echocardiography imaging fusion: a new approach to congenital heart disease.

INTRODUCTION AND OBJECTIVES: Diagnosis, management, and surgical decision-making in children and adults with congenital heart disease are largely based on echocardiography findings. A recent development in cardiac imaging is fusion of different imaging modalities. Our objective was to evaluate the feasibility of computed tomography (CT) and 3-dimensional (3D) transthoracic echocardiography (TTE) fusion in children and adults with congenital heart disease. METHODS: We prospectively included 14 patients, 13 of whom had congenital heart disease, and who underwent both CT and 3D TTE as part of their usual follow-up. We described the steps required to complete the fusion process (alignment, landmarks, and superimposition), navigation, and image evaluation. RESULTS: Median age was 9.5 [2.7-15.7] years, 57% were male, and median body surface area was 0.9 m2 [0.6-1.7]. Congenital heart disease was classified as simple (n=4, 29%), moderate (n=4, 29%), or complex (n=6, 42%). 3D TTE-CT fusion was successful in all patients. Median total time to complete the fusion process was 735 [628-1163] seconds, with no significant difference according to the degree of complexity of the defects. Landmarks were significantly modified in complex congenital heart disease. CONCLUSIONS: We established the feasibility and accuracy of 3D TTE-CT fusion in a population of children and adults with a variety of congenital heart diseases. The simultaneous visualization of many intracardiac structures may help to understand the anatomical features of congenital heart disease without limitations regarding age, weight, or complexity of the congenital defects.

Inferior sinus venosus defect and anomalous hepatic venous return to the coronary sinus leading to an Eisenmenger syndrome.

Inferior sinus venosus defect associated with left hepatic vein drainage to the coronary sinus is an extremely rare condition. We report the case of a 41-year-old man suffering from pulmonary arterial hypertension related to this unusual CHD. Planning of heart-lung transplantation in this case required accurate anatomical description.

Three-dimensional geometry of coronary arteries after arterial switch operation for transposition of the great arteries and late coronary events.

OBJECTIVE: Using 3-dimensional (3D) modeling to predict late coronary events after the arterial switch operation (ASO) for transposition of the great arteries (TGA). METHOD: We reviewed 100 coronary computed tomography scans performed after ASO randomly selected from free-from-coronary-event patients and 21 coronary computed tomography scans from patients who had a coronary event later than 3 years after ASO. Using 3D modeling software, we defined and measured 6 geometric criteria for each coronary artery: Clockwise position of coronary ostium, First centimeter angle defined as the angle between of the coronary artery ostium and the first centimeter of the vessel, Minimal 3D angle between the coronary first centimeter and the aortic wall, ostium height defined as the distance between the ostium and the aortic valve, distance between the coronary ostium and the pulmonary artery, and distance between the coronary first centimeter and the pulmonary artery. RESULTS: None of the right ostium geometric parameters were associated with coronary events. Four out of 6 criteria of left coronary artery geometry were associated to coronary events: Clockwise position of the left ostium >67° (P < .001), First centimeter angle >62° (P < .01), minimal 3D angle <39° (P = .003), distance between the coronary ostium and the pulmonary artery <1 mm/mm (P = .03). The association of first centimeter angle >62° and minimal angle in 3D <39° had a 88% sensitivity and a 81% specificity to predict coronary events (receiver operator characteristics curve, 0.847; 95% confidence interval, 0.745-0.949; P < .001). CONCLUSIONS: The acquired geometric characteristics of the transferred left coronary artery are associated with coronary events. Imaging coronary arteries after ASO might be useful to select patients at higher risk of coronary events and to tailor surveillance.

3D-Printed Models for Surgical Planning in Complex Congenital Heart Diseases: A Systematic Review.

Background: 3D technology support is an emerging technology in the field of congenital heart diseases (CHD). The goals of 3D printings or models is mainly a better analysis of complex anatomies to optimize the surgical repair or intervention planning. Method: We performed a systematic review to evaluate the accuracy and reliability of CHD modelization and 3D printing, as well as the proof of concept of the benefit of 3D printing in planning interventions. Results: Correlation studies showed good results with anatomical measurements. This technique can therefore be considered reliable with the limit of the operator's subjectivity in modelizing the defect. In cases series, the benefits of the 3D technology have been shown for describing the vessels anatomy and guiding the surgical approach. For intra-cardiac complex anatomy, 3D models have been shown helpful for the planification of intracardiac repair. However, there is still lack of evidence based approach for the usefulness of 3D models in CHD in changing outcomes after surgery or interventional procedures due to the difficulty to design a prospective study with comprehensive and clinically meaningful end-points. Conclusion: 3D technology can be used to improve the understanding of anatomy of complex CHD and to guide surgical strategy. However, there is a need to design clinical studies to identify the place of this approach in the current clinical practice.