Two rotator cuff tear repair techniques for sovraspinatus tendon tear: transosseous sharc-ft vs single row repair.

BACKGROUND: Despite rotator cuff repair techniques have developed significantly in last decade, pushed by the progress in technology and materials, the treatment of rotator cuff tears and re-tears is still a big challenge for shoulder surgeons. The aim of this study is to perform clinical and radiological evaluation (ultrasound and MRI) of patients treated with transosseous sharc-ft, and single row techniques for sovraspinatus rotator cuff tear at 6, 12 and 24 months follow up. METHODS: Twenty-eight consecutive patients who underwent arthroscopic repair for rotator cuff tear were enrolled in the study and divided in two different groups: group A (14 patients) underwent a single row technique repair; group B (14 patients) underwent a transosseous sharc-ft technique repair. All participants had MRI or ultrasound examination confirmed fullthickness tears of sovraspinatus tendon before surgery. All the patients underwent clinical evaluation at 45 days, 3 months, 6 months, 12 and 24 months post-operatively with VAS, Dash, Constant and ASES score. Diagnostic ultrasound examination was performed at 6 months follow up while the MRI examination at 1 and 2 year follow up. RESULTS: The whole primary variables didn't show any significant difference and the groups were homogenous (age, Goutallier fatty infiltration, VAS, DASH, Constant, ASES). Some statistically significant differences are visible at discrete variables in a specific time: Dash at 12 months and Constant at 24 months show a significant improvement versus single-row technique. CONCLUSION: The arthroscopic transosseous repair technique with sharc-ft showed excellent results with little significant statically difference between this technique and the single row for this kind of lesion after 1 year of follow-up. Clinical data from this study confirmed, with the help of ultrasound examination and MRI, the excellent clinical outcome obtained by the patients. Further studies are needed to find differences between these techniques in the repair of large and massive rotator cuff lesions. (www.actabiomedica.it).

Imaging of the Unstable Shoulder.

BACKGROUND: Unstable shoulder can occur in different clinical scenarios with a broad spectrum of symptoms and presentations: first-time (or recurrent) traumatic acute shoulder anterior dislocation or chronic anterior instability after repeated dislocations.Imaging in unstable shoulder is fundamental for choosing the right treatment preventing recurrence.The goal of imaging depends on clinical scenario and patient characteristics. METHOD: Careful selection and evaluation of the imaging procedures is therefore essential to identify, characterize and quantify the lesions. Proper imaging in unstable shoulder cases is critical to the choice of treatment to prevent recurrence, and to plan surgical intervention. RESULTS: In acute setting, radiographs have to roughly detect and characterize the bone defects present. At about 7 days, it is recommended to perform a MR to demonstrate lesions to labrum and/or ligaments and bone defects: in acute setting, the MRA is not necessary, because of effusion and hemarthrosis that behave as the contrast medium.In recurrence, it is fundamental not only to detect lesions but characterize them for planning the treatment. The first study to do is the MRI (with a magnetic field of at least 1.5 Tesla), and if possible MRA, above all in younger patients. Then, on the basis of the pathologic findings as bipolar lesion or severity of bone defects, CT can be performed. PICO method on 2D or 3D CT is helpful if you need to study a glenoid bone loss, with the "en face view" of glenoid, while a 3D CT reconstruction with the humeral head "en face view" is the gold standard to assess an Hill-Sachs lesion. CONCLUSION: The clinical diagnoses of anterior shoulder instability can be different and acknowledgement of imaging findings is essential to guide the treatment choice.Imaging features are quite different in chronic than in acute scenario. This requires appropriate indications of many different imaging techniques.

Morphological Study: Ultrastructural Aspects of Articular Cartilage and Subchondral Bone in Patients Affected by Post-Traumatic Shoulder Instability.

Post-traumatic shoulder instability is a frequent condition in active population, representing one of most disabling pathologies, due to altered balance involving joints. No data are so far available on early ultrastructural osteo-chondral damages, associated with the onset of invalidating pathologies, like osteoarthritis-OA. Biopsies of glenoid articular cartilage and sub-chondral bone were taken from 10 adult patients underwent arthroscopic stabilization. Observations were performed under Transmission Electron Microscopy-TEM in tangential, arcuate and radial layers of the articular cartilage and in the sub-chondral bone. In tangential and arcuate layers chondrocytes display normal and very well preserved ultrastructure, probably due to the synovial liquid supply; otherwise, throughout the radial layer (un-calcified and calcified) chondrocytes show various degrees of degeneration; occasionally, in the radial layer evidences of apoptosis/autophagy were also observed. Concerning sub-chondral bone, osteocytes next to the calcified cartilage also show signs of degeneration, while osteocytes farther from the osteo-chondral border display normal ultrastructure, probably due to the bone vascular supply. The ultrastructural features of the osteo-chondral complex are not age-dependent. This study represents the first complete ultrastructural investigation of the articular osteo-chondral complex in shoulder instability, evaluating the state of preservation/viability of both chondrocytes and osteocytes throughout the successive layers of articular cartilage and sub-chondral bone. Preliminary observations here collected represent the morphological basis for further deepening of pathogenesis related to shoulder instability, enhancing the relationship between cell shape and microenvironment; in particular, they could be useful in understanding if the early surgical treatment in shoulder instability could avoid the onset of OA. Anat Rec, 300:1208-1218, 2017. © 2016 Wiley Periodicals, Inc.

A 3D finite element model for geometrical and mechanical comparison of different supraspinatus repair techniques.

BACKGROUND: Contact pressure and contact area are among the most important mechanical factors studied to predict the effectiveness of a rotator cuff repair. The suture configurations can strongly affect these factors but are rarely correlated with each other. For example, there is a significant difference between the single-row technique and the transosseous or transosseous-like approaches in terms of footprint contact area coverage. A finite element model-based approach is presented and applied to account for various parameters (eg, suture pretension, geometry of the repair, effect of the sutures, geometry of the lesion) and to compare the efficacy of different repair techniques in covering the original footprint. METHODS: The model allows us to evaluate the effect of parameters such as suture configuration and position and suture pretension. The validity of such an approach was assessed in comparing 3 different repair techniques: single row, transosseous equivalent, and double row. RESULTS: Results from the application of the models show that the double-row and transosseous-equivalent techniques lead to progressive increase of the contact area compared with the single-row approach, supporting the conclusion that transosseous-equivalent fixation leads to an increase of the contact area and a better distribution of the pressure coverage. CONCLUSION: The 3-dimensional finite element model approach allows multiple variables to be assessed singularly, weighing the specific influence. Moreover, the approach presented in this study could be a valid tool to predict and to reproduce different configurations, identifying how to reduce the stress over the tendon and when a repair could be effective or not.

Complex fractures of the humeral shaft treated with antegrade locked intramedullary nail: clinical experience and long-term results.

BACKGROUND: indications for surgical treatment of complex humeral shaft fractures are still controversial. The purpose of this study was to evaluate the outcomes of treating humeral shaft fractures using antegrade locked  intramedullary nail, compared to the treatment with traditional more aggressive techniques such as plate and screws. METHODS: between February 2008 and January 2011 38 patients were treated with antegrade locked intramedullary nail for humeral shaft fractures, divided according to the AO classification. 28 patients were clinically followed: disability, pain and functional recovery were evaluated using the Constant score and DASH score and the ROM of the shoulder was checked. RESULTS: Bony union was obtained in 27 patients at a mean time of 2.7 months. One fracture ended in nonunion, healed after replacing the nail with a longer one. Patients achieved satisfactory shoulder function with a mean Constant score of  90.57 points and with a mean DASH score of 4.69 points. There were no other complications. CONCLUSION: the antegrade locked intramedullary nail represents a recommended option for the treatment of humeral shaft fractures, obtaining a steady synthesis, a short time of consolidation and a rapid functional recovery. (www.actabiomedica.it).

Arthroscopic Rotator Cuff Tear Transosseous Repair System: The Sharc-FT Using the Taylor Stitcher.

Transosseous rotator cuff tear repair was first described in 1944. Over the years, it has represented the gold standard for such lesions. Through open and mini-open approaches, as well as the arthroscopic approach, the transosseous repair system represents one of the most reliable surgical techniques from a biological and mechanical perspective. Nevertheless, further improvements are required. This article describes an arthroscopic rotator cuff tear transosseous repair system, developed in collaboration with NCS Lab (Carpi, Italy): the Sharc-FT using the Taylor Stitcher. Our first experience in the clinical application of the arthroscopic technique using the transosseous suture system has shown encouraging clinical outcomes, confirming its efficacy. The patient satisfaction rate was high, and no patient expressed concern about the implant. The complication rate was very low. By improving the suture technique in the treatment of rotator cuff tears, a remarkable increase in the success rate in the treatment of this pathology could be reached; nevertheless, complications such as retears of the rotator cuff still occur.

Causes and treatments of lag screw's cut out after intramedullary nailing osteosinthesis for trochanteric fractures.

Background. Superior cut-out of a lag screw remains a serious complication in the treatment of trochanteric or subtrochanteric fractures and it is related to many factors: the type of fracture, osteoporosis and the stability of fracture reduction. Little is known about the outcome after revision surgery for complications of the gamma nail. We assessed the outcome in patients who had revision surgery because of lag screw's cut out after gamma nailing for a trochanteric fracture.Material and Method. We present a study of 20 consecutive patients who underwent treatment after 20 cut-out of the lag screw fixation of a trochanteric fracture with Gamma Locking Nail from September 2004 to November 2010. In 16 patients hip prothesis was performed, in 1 the removal of the implant and in 3 the reosteosynthesis. We reviewed 13 patients: 10 total hip arthroplasty, 2 endoprothesis and 1 reosteosynthesis of nail and lag screw (mean follow up: 26 months, mean age: 73 years old), 7 patients died. Patients were reviewed retrospectively by an independent observer. Clinical evaluation was performed, Oxford score and Harris Hip score were measured. X-Ray examination was performed after a minimum of 12 months of follow up.Results. Mean Harris Hip Score mean was 67 and mean Oxford score was 32 in hip prothesis group (12 patients). We had several complications, Implant-related complications were: 2 ipometria > 2cm, 2 recurrent hip arthroplasty dislocations (1 reoperated), 4 persistent thigh pain. In only 4 patients none complications were observed. Another patient,  who had been subjected to reosteosinthesis, obtained better results (HHS:95, Oxford score:45) but with a 2 cm ipometria and occasional pain in the thigh.Conclusion. Cut out after gamma nail is consequent to biological or mechanical causes. Treatment of this complication is hip prosthesis (parzial or total hip arthroplasty), reosteosynthesis of the lag screw and/or the nail and the removal of the implant. Conversion to total/parzial hip arthroplasty may be a demanding operation with a higher complication rate respect to the standard, while reosteosynthesis is possible in selected patients and early cutting out.

Isolated fractures of the greater tuberosity in proximal humerus: does the direction of displacement influence functional outcome? An analysis of displacement in greater tuberosity fractures.

BACKGROUND AND AIM OF THE WORK: The treatment of isolated fractures of the greater tuberosity of the proximal humerus is still debated, especially in the case of minimally dispaced fractures. Differently from other proximal humerus fractures this kind of injury frequently affects young patients with high functional request. The aim of this study is to assess the outcome of patients treated conservatively for greater tubero-sity isolated fractures, comparing the clinical results in patients with different direction of fracture displacement. METHODS: 38 patients with isolated fracture of greater tuberosity participated to the study and were evaluated at 17 months (10-26) of follow up using Constant Murley Score and DASH Score. Patients were divided in groups with different direction of displacement (10 no displacement, 13 postero-superior, 6 antero-superior and 9 antero-inferior displacement). RESULTS: Patients with no displaced fractures had a mean Constant Murley Score of 82 and a mean DASH Score of 15; those with postero-superior displacement had a mean a Constant Murley Score of 61 and a mean DASH Score of 43; for antero-superior displacement the mean Constant Murley Score was 76 and the mean DASH Score of 18; for the antero-inferiorly displaced the mean Constant Murley Score was 83 and the DASH Score 16. CONCLUSION: Data suggest that postero-superior displacement leads to poorer outcomes than undisplaced or displaced in other directions fractures treated conservatively.

Assessment of bone defects in anterior shoulder instability.

Glenohumeral bone defects are a common finding in shoulder instability and they are strongly correlated with recurrence of dislocation and failure following arthroscopic Bankart repair. Most authors agree that open surgery should be considered in the presence of certain conditions: glenoid bone loss > 25%, a lesion involving > 30% of the humeral head, an engaging Hill-Sachs lesion, bipolar bone lesions even without engagement. A careful imaging evaluation must therefore be performed in order to identify, quantify and characterize the bone defects. Even though magnetic resonance has important additional value in the assessment of the glenoid labrum and rotator cuff, computed tomography scan is the examination of choice for studying bone defects. Several methods have been proposed to quantify the extent of the glenoid bone defect; the most accurate ones utilize two-dimensional computed tomography images with multiplanar reconstructions (PICO method) or more sophisticated three-dimensional reconstruction software. Conversely, the literature lacks studies that accurately quantify humeral bone defects and, above all, that demonstrate definitively the clinical and prognostic significance of the lesion location and size.

Analysis of risk factors for glenoid bone defect in anterior shoulder instability.

BACKGROUND: Glenoid bone defect is frequently associated with anterior shoulder instability and is considered one of the major causes of recurrence of instability after shoulder stabilization. HYPOTHESIS: Some risk factors are significantly associated with the presence, size, and type of glenoid bone defect. STUDY DESIGN: Cohort study (prognosis); Level of evidence, 2. METHODS: One hundred sixty-one patients affected by anterior shoulder instability underwent morphologic evaluation of the glenoid by computed tomography scans to assess the presence, size, and type of glenoid bone defect (erosion or bony Bankart lesion). Bone loss greater than 20% of the area of the inferior glenoid was considered "critical" bone defect (at risk of recurrence). Outcomes were correlated with the following predictors: age, gender, arm dominance, frequency of dislocation, age at first dislocation, timing from first dislocation, number of dislocations, cause of first dislocation, generalized ligamentous laxity, type of sport, and manual work. RESULTS: Glenoid bone defect was observed in 72% of the cases. Presence of the defect was significantly associated with recurrence of dislocation compared with a single episode of dislocation, increasing number of dislocations, male gender, and type of sport. Size of the defect was significantly associated with recurrent dislocation, increasing number of dislocations, timing from first dislocation, and manual work. Presence of a critical defect was significantly associated with number of dislocations and age at first dislocation. Bony Bankart lesion was significantly associated with male gender and age at first dislocation. CONCLUSION: The number of dislocations and age at first dislocation are the most significant predictors of glenoid bone loss in anterior shoulder instability.