The Stresses and Deformations in the Abfraction Lesions of the Lower Premolars Studied by the Finite Element Analyses: Case Report and Review of Literature.

BACKGROUND: The purpose of the study was to investigate the behavior of hard dental structures of the teeth with abfraction lesions when experimental occlusal loads were applied. METHODS: A 65-year-old patient came to the dentist because she had painful sensitivity in the temporomandibular joints and the lower right premolars. The patient was examined, and cone-beam computed tomography (CBCT) of the orofacial area was indicated. The data provided from the CBCT were processed with Mimics Innovation Suite 17 software to create the desired anatomical area in 3D format. Then, the structural calculation module was used in order to perform a finite element analysis of the lower right premolar teeth. A focused review of articles published between 2014 and 2023 from specialty literature regarding the FEA of premolars with abfraction lesions was also conducted. RESULTS: The parcel area and the cervical third of the analyzed premolars proved to be the most vulnerable areas under the inclined direction of occlusal loads. The inclined application of experimental loads induced 3-4 times higher maximum shears, stresses, and deformations than the axial application of the same forces. CONCLUSIONS: FEA can be used to identify structural deficiencies in teeth with abfractions, a fact that is particularly important during dental treatments to correct occlusal imbalances.

Evaluation of Abfraction Lesions Restored with Three Dental Materials: A Comparative Study.

BACKGROUND: Abfraction lesions are manifested as damage to hard tissues in the cervical area of dental crowns. The study aimed to assess the direct restoration of abfraction lesions according to the modified United States Public Health Service (USPHS) criteria for 24 months. The restorations were accomplished with Fuji Bulk-GC, Omnichroma Flow-Tokuyama, and Beautifil® II-Shofu dental materials, and the therapy was or was not associated with wearing thermoformed mouthguards. METHODS: From the 53 selected and analyzed patients (n = 53), 28 patients (with restorations of abfraction lesions) belonged to the 1st group and 25 patients (with 105 restorations, who also wore mouthguards) belonged to the 2nd group. Blind determination assessments were effectuated at baseline and after 2, 6, 12, 18, and 24 months. Results showed that, regardless of the rating score, there are no significant statistical differences in the evaluation criteria between the two groups of patients Conclusions: For each material, the scores of USPHS criterion presented good clinical performances after 24 months, with no significant statistical differences between the fillings and the applied therapy in the two groups of patients.

The Clinical and Microbiological Effects of LANAP Compared to Scaling and Root Planing Alone in the Management of Periodontal Conditions.

The purpose of this study was to evaluate the efficiency of two therapeutic procedures clinically and microbiologically in the management of periodontally affected teeth: scaling and root planing alone and the laser-assisted new attachment procedure (LANAP). Molecular biological determinations of bacterial markers through the polymerase chain reaction (real-time PCR) method with standard PET tests (species-specific DNA probes at a time) were used for the quantification of three of the most important periodontal pathogens (Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, and Treponema denticola). Both nonsurgical periodontal therapies were proven effective in patients with chronic periodontal disease; however, LANAP was associated with a greater reduction in pocket depth and improved clinical outcomes, associated with a significant decrease in the amount of Porphyromonas gingivalis. The clinical results included a decrease in periodontal pocket depth, bleeding on probing, and dental plaque, with LANAP having better overall outcomes than SRP alone. The use of Nd:YAG lasers in LANAP therapy is a safe and effective procedure that is well accepted by patients.

Clinical Assessment of the Hyperbaric Oxygen Therapy Efficacy in Mild to Moderate Periodontal Affections: A Simple Randomised Trial.

Background and Objectives: Gum disease represents the condition due to the dental plaque and dental calculus deposition on the surfaces of the teeth, followed by ulterior destruction of the periodontal tissues through the host reaction to the pathogenic microorganisms. The aim of study was to present aspects regarding the efficacy of hyperbaric oxygen therapy (HBOT) as an adjuvant therapy for the treatment of periodontal disease, started from the already certified benefits of HBOT in the general medicine specialties. Materials and Methods: The participant patients in this study (71) required and benefited from specific periodontal disease treatments. All patients included in the trial benefited from the conventional therapy of full-mouth scaling and root planing (SRP) within 24 h. HBOT was performed on the patients of the first group (31), in 20 sessions, of one hour. The patients of the control group (40) did not benefit from HBO therapy. Results: At the end of study, the included patients in HBOT group presented significantly better values of oral health index (OHI-S), sulcus bleeding index (SBI), dental mobility (DM), and periodontal pocket depth (PD) than the patients of the control group. Conclusions: HBOT had beneficial effects on the oral and general health of all patients, because in addition to the positive results in periodontal therapy, some individual symptoms of the patients diminished or disappeared upon completion of this adjuvant therapy.

Evaluation of the Behavior of Two CAD/CAM Fiber-Reinforced Composite Dental Materials by Immersion Tests.

Fiber-reinforced composites are used as restorative materials for prosthetic oral rehabilitation. Gastroesophageal reflux disease (GERD) is an accustomed affection with various oral manifestations. This study aimed to evaluate the behavior of two high-performance CAD/CAM milled reinforced composites (Trinia™, TriLor) in artificial saliva at different pH levels through immersion tests, and to determine if changes in mass or surface morphology at variable pH, specific for patients affected by GERD, appear. After investigating the elemental composition and surface morphology, the specimens were immersed in Carter Brugirard artificial saliva for 21 days at different pH values (5.7, 7.6, and varying the pH from 5.7 to 3). The values of the weighed masses during the immersion tests were statistically processed in terms of mean and standard deviation. Results suggested that irrespective of the medium pH, the two composites presented a similar mass variation in the range of -0.18 (±0.01)-1.82 (±0.02) mg after immersion, suggesting their stability when in contact with artificial saliva, an aspect which was also highlighted by scanning electron microscope (SEM) analysis performed on the immersed surfaces. Novel composite biomaterials can be a proper alternative for metal alloys used for prosthetic frameworks in patients suffering from GERD.

Use of optical coherence tomography in orthodontics.

Optical coherence tomography (OCT) is a modern imaging method with applicability in orthodontics. In recent years, there has been an increasing trend in the use of ceramic brackets. The aim of the present study was to investigate the effects of bonding metallic and ceramic brackets on tooth enamel, using optical coherence tomography. For this purpose, 20 permanent teeth we bonded and were subsequently debonded using a side cutter or anterior bracket removal pliers. Using the OCT technique, the enamel, the amount of adhesive remaining and the bracket fragments remaining on the tooth surface were analyzed following the debonding procedure. It was demonstrated that enamel cracks were present only in the samples bonded with ceramic brackets. At the same time, it was noted that the type of pliers did not affect the incidence and extent of damage to the enamel. The type of debonding technique (using the side cutter or the anterior removal pliers) used did not markedly affect the amount of adhesive remaining on the teeth. Thus, as demonstrated herein, by analyzing the enamel structure through the use of OCT, the quality of the processes and the materials used for manufacturing brackets can be increased.

Experimental Study Regarding the Behavior at Different pH of Two Types of Co-Cr Alloys Used for Prosthetic Restorations.

Cobalt-chromium (Co-Cr) alloys are widely utilized in dentistry. The salivary pH is a significant factor, which affects the characteristics and the behavior of dental alloys through corrosion. This study aimed to evaluate the corrosion behavior in artificial saliva with different pH values (3, 5.7, and 7.6) of two commercial Co-Cr dental alloys manufactured by casting and by milling. Corrosion resistance was determined by the polarization resistance technique, and the tests were carried out at 37 ± 1 °C, in Carter Brugirard artificial saliva. After the electrochemical parameters, it can be stated that the cast Co-Cr alloy has the lowest corrosion current density, the highest polarization resistance, and the lowest speed of corrosion in artificial saliva with pH = 7.6. In the case of milled Co-Cr alloy, the same behavior was observed, but in artificial saliva with pH = 5.7, it recorded the most electropositive values of open circuit potential and corrosion potential. Although both cast and milled Co-Cr alloys presented a poorer corrosion resistance in artificial saliva with a more acidic pH value, the milled Co-Cr alloy had better corrosion behavior, making this alloy a better option for the prosthetic treatment of patients suffering from GERD.

Effect of Hydrogen Peroxide Photoactivated Decontamination Using 940 nm Diode Laser in Periodontal Treatment: A Pilot Study.

Objective: The aim of this study was to compare the antimicrobial effects of hydroxyl radical generation by photoactivation of hydrogen peroxide (H2O2) with diode laser (λ = 940 nm) in combination with conventional nonsurgical periodontal therapy. Materials and methods: Thirty-eight patients and 114 teeth were included in this study. The test teeth were randomly assigned to one of the three treatment groups: Group 1 (control group): scaling and root planning (SRP); and the following experimental groups: Group 2: SRP +940 nm diode laser; Group 3: SRP+photoactivation of H2O2 with 940 nm diode laser. Clinical examinations, such as periodontal probing depth (PPD), clinical attachment level (CAL), and bleeding on probing (BoP) were performed before and after the treatment. The microbiological evaluation included nine periodontal bacterial species investigated by means of real-time polymerase chain reaction assay before and after the treatment. The clinical and bacterial differences were assessed between the investigated groups. Results: The total bacteria load was reduced for all three studied groups and all periodontal indexes (PPD, CAL, and BoP) were improved after each treatment. Group 3 showed significant bacterial reduction of the major periodontal bacteria such as Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola, Prevotella intermedia, Peptostreptococcus micros, Fusobacterium nucleatum, Eubacterium nodatum (p < 0.001) in contrast to the other two groups (p > 0.001). Differences between tested groups showed significant results with regard to Group 3. Conclusions: The synergistic effect of SRP and photoactivation of H2O2 with 940 nm diode laser offers an efficient and reliable antimicrobial effect in the nonsurgical periodontal treatment approach.