RESUMO
New processing routes and characterization techniques underpin further growth of biomaterials for improved performance and multifunctionality. This study investigates the characteristics and solubility of amorphous calcium phosphate (ACP) printed splats. Splats made from 20 to 60 µm molten hydroxyapatite particles were classified for shape (rounded/splashed) and cracking. Recoil of the spread droplet created a bowl-shaped splat. This has previously not been observed and could be related to the longer solidification time associated with solidification to an ACP. A central depression was created from 20 µm particles, but a bowl-shaped splat from 60 µm particles. Cracking was more prevalent for splats that solidified with an edge discontinuity. Splats immersed in pH 7.3 tris buffer displayed dissolution followed by cracking. Cracking continued over a period of 15 min as dissolution induced more cracks. Further degradation occurred by delamination of splat segments. Delamination accelerated the process of splat removal. Applied to thermal spray coatings, this highlights topography and dissolution at the splat level. The use of separate splats can potentially be used as a biolayer where splats are separate, in a line or on top of each other.