Promoting running as the best treatment for lower back pain in physiotherapy practice: a best practice implementation project.

OBJECTIVES: This project aimed to promote running as the best treatment for lower back pain (LBP) in an outpatient setting. INTRODUCTION: LBP is one of the most prevalent conditions worldwide. Sixty-two percent of all Germans experience episodes of non-specific back pain at least once a year, with one-fifth developing chronic conditions. Intervertebral disc (IVD) degeneration is a natural process, contributing to periods of acute LBP. However, the scientific literature and guidelines partially overlook the significance of water management in IVD. This implementation project sought to address this gap by educating patients about this process. Running and/or walking were chosen as general approaches for treatment rather than specific disease-related approaches. METHODS: This implementation project was conducted in an outpatient physiotherapy clinic in Brandenburg, Germany, utilizing the JBI Evidence Implementation Framework. An evidence-informed clinical audit and feedback strategy was used to measure compliance with ten audit criteria. Five physiotherapists and 20 patients took part in the audits. RESULTS: At baseline, only 20% of participating physiotherapists screened for yellow flags regarding psychological issues. However, after project implementation, this criterion scored 100% compliance. Some patients performed exercises independently, but confusion persisted regarding the choice of beneficial exercises. Patients continued running, but those who took a break due to pain expressed uncertainty about resuming. CONCLUSIONS: The project highlighted the effectiveness of collaborative efforts between patients and therapists to address the issue. The project team's conviction in action and solution strategies serves as the foundation for this collaboration. This implementation strategy provided "running" patients with the confidence to either resume or reintegrate running after an extended break. SPANISH ABSTRACT: http://links.lww.com/IJEBH/A222.

Robotic-assisted total knee arthroplasty reduces postoperative complications and length of stay without increased cost compared to navigation-guided techniques: A national analysis.

INTRODUCTION: This study compares postoperative outcomes of robotic-assisted total knee arthroplasty (RA-TKA) versus navigation-guided total knee arthroplasty (NG-TKA). Using Nationwide Inpatient Sample (NIS) data, it provides an analysis of postoperative complications, mortality, hospital costs and duration of stay. METHODS: The study analysed 217,715 patients (81,830 RA-TKA; 135,885 NG-TKA) using NIS data from 2016 to 2019. Elective TKA patients were identified through the International Classification of Diseases, 10th Revision codes. Statistical analyses, including logistic regression modelling, were performed using Statistical Package for the Social Sciences and MATLAB. RESULTS: RA-TKA patients were younger (66.1 vs. 67.1 years, p < 0.0001) and had similar mortality rates (0.024% vs. 0.018%, p = 0.342) but shorter length of stay (LOS) (1.89 vs. 2.1 days, p < 0.0001). Mean total charges were comparable between RA-TKA ($66,180) and NG-TKA ($66,251, p = 0.669). RA-TKA demonstrated lower incidences of blood-related complications (11.67% vs. 14.19%, p < 0.0001), pulmonary oedema (0.0306% vs. 0.066%, p < 0.0001), deep vein thrombosis (0.196% vs. 0.254%, p = 0.006) and acute kidney injury (AKI) (1.356% vs. 1.483%, p = 0.016). CONCLUSION: RA-TKA reduces postoperative complications and LOS without increasing costs, highlighting the relevance of this technology in patient care. LEVEL OF EVIDENCE: Level III.

Movement-based cognitive training does not significantly shorten the learning curve for acquiring arthroscopic basic skills.

PURPOSE: Skilful arthroscopy requires an aboveaverage level of manual dexterity. It is evident that particular motor skills can be learned and trained before arthroscopic training. The aim of this prospective cohort study was to investigate the impact of movement-related cognitive training on the learning curve during arthroscopic basic training. METHODS: Fifty right-handed participants without arthroscopic experience were matched to an intervention group (n = 25) and a control group (n = 25). Prior to basic arthroscopic skill training with a simulator, the intervention group underwent 12 weeks of movement-related cognitive training. Cognitive and motor skills were assessed in both groups by using standardised tests (CogniFit test, angle reproduction test, two-arm coordination test) as a pretest and, for the intervention group, again before arthroscopic training as a posttest. For arthroscopic simulator training, three tasks ('Telescoping', 'Periscoping', 'Triangulation') from the Fundamentals of Arthroscopic Surgery Training module were selected and practiced 10 times with the camera in the right and left hands. The learning progress was quantified by exercise time, camera path length and hook path length. RESULTS: No significant differences in sex distribution, age distribution or the results of the pretests between the intervention group (n = 21) and the control group (n = 25) were found (n.s.). The intervention group improved significantly from the pretest to the posttest in the CogniFit (p = 0.003) and two-arm coordination test in terms of time (p < 0.001) and errors (p = 0.002) but not in the angle reproduction test. No significant differences were found between the groups for the three arthroscopic tasks. CONCLUSION: The hypothesis that movement-related cognitive training shortens the learning curve for acquiring arthroscopic basic skills cannot be confirmed. Other factors influencing the learning curve such as talent, teaching method and motivation have a greater impact on the acquisition of complex motor skills. LEVEL OF EVIDENCE: Level II.

Artificial intelligence-based assessment of leg axis parameters shows excellent agreement with human raters: A systematic review and meta-analysis.

PURPOSE: The aim of this study was to conduct a systematic review and meta-analysis on the reliability and applicability of artificial intelligence (AI)-based analysis of leg axis parameters. We hypothesized that AI-based leg axis measurements would be less time-consuming and as accurate as those performed by human raters. METHODS: The study protocol was registered with the International Prospective Register of Systematic Reviews (PROSPERO). PubMed, Epistemonikos, and Web of Science were searched up to 24 February 2024, using a BOOLEAN search strategy. Titles and abstracts of identified records were screened through a stepwise process. Data extraction and quality assessment of the included papers were followed by a frequentist meta-analysis employing a common effect/random effects model with inverse variance and the Sidik-Jonkman heterogeneity estimator. RESULTS: A total of 13 studies encompassing 3192 patients were included in this meta-analysis. All studies compared AI-based leg axis measurements on long-leg radiographs (LLR) with those performed by human raters. The parameters hip knee ankle angle (HKA), mechanical lateral distal femoral angle (mLDFA), mechanical medial proximal tibial angle (mMPTA), and joint-line convergence angle (JLCA) showed excellent agreement between AI and human raters. The AI system was approximately 3 min faster in reading standing long-leg anteroposterior radiographs (LLRs) compared with human raters. CONCLUSION: AI-based assessment of leg axis parameters is an efficient, accurate, and time-saving procedure. The quality of AI-based assessment of the investigated parameters does not appear to be affected by the presence of implants or pathological conditions. LEVEL OF EVIDENCE: Level I.

Indirect comparisons of traction table versus standard table in total hip arthroplasty through direct anterior approach: a systematic review and frequentist network meta-analysis.

BACKGROUND: It remains unclear whether the use of an orthopaedic traction table (TT) in direct anterior approach (DAA) total hip arthroplasty (THA) results in better outcomes. The aim of this systematic review and network meta-analysis was to compare the THA outcomes through DAA on a standard operating table and the THA outcomes through DAA on a TT. METHODS: PubMed, Epistemonikos, and Google Scholar were searched for relevant randomized controlled trials (RCTs) up to 01 January 2024. An indirect comparison in network meta-analysis was performed to assess treatment effects between DAA on a TT and DAA on a standard table, using fixed-effects and random-effects models estimated with frequentist approach and consistency assumption. Standardized mean differences (SMDs) with 95% confidence intervals (CIs) were estimated for continuous variables and odds ratios (ORs) with 95% CIs were estimated for binary variables. RESULTS: The systematic review of the literature identified 43 RCTs with a total of 2,258 patients. DAA with TT had a 102.3 mL higher intraoperative blood loss and a 0.6 mmol/L lower Hb 3 days postoperatively compared with DAA without TT (SMD = 102.33, 95% CI 47.62 to 157.04; SMD = - 0.60, 95% CI - 1.19 to - 0.00). DAA with TT had a 0.15 lower periprosthetic fracture OR compared with DAA without TT (OR 0.15, 95% CI 0.03 to 0.86). There were no further significant differences in surgical, radiological, functional outcomes and in complication rates. CONCLUSION: Based on our findings and taking into account the limitations, we recommend that particular attention be paid to the risk of periprosthetic fracture in DAA on a standard operating table and blood loss in DAA with TT. Since numerous other surgical, radiological, functional outcome parameters and other complication rates studied showed no significant difference between DAA on a standard operating table and DAA with TT, no recommendation for a change in surgical technique seems justified. LEVEL OF EVIDENCE: Level I evidence, because this is a systematic review and meta-analysis of randomized controlled trials.

Trends and epidemiology in robotic-assisted total knee arthroplasty: Reduced complications and shorter hospital stays.

INTRODUCTION: This study provides an in-depth analysis of the immediate postoperative outcomes and implications or robotic-assisted total knee arthroplasty (RA-TKA) compared with conventional TKA (C-TKA), particularly with regard to mortality, complications, hospital stay and costs, drawing from a comprehensive nationwide data set. METHODS: The Nationwide Inpatient Sample (NIS) database, the largest all-payer inpatient healthcare database in the United States, was used to identify all patients who underwent RA-TKA or C-TKA from 2016 to 2019. A total of 527,376 cases, representing 2,638,679 patients who underwent elective TKA were identified, of which 88,415 had RA-TKA. To mitigate potential variations and selection bias in baseline characteristics between the two groups, a propensity score-matched analysis was employed to further balance and refine our data set, resulting in 176,830 patients evenly distributed between the groups. Analysis was performed according to demographics, immediate post-operative complications, and economic data, including payor class, length of stay and total charges. RESULTS: There was a marked shift towards RA-TKA, from an initial 0.70% in 2016 to a notable 7.30% by 2019. Patients who underwent RA-TKA were slightly younger (66.2 ± SD years), compared to the C-TKA group (66.7 ± SD years). Hospital stay was 1.89 days and 2.29 days for RA-TKA and C-TKA, respectively. Charges metrics revealed slightly higher charges for RA-TKA. Less postoperative complications were found in the RA-TKA group, such as blood loss, anaemia, acute kidney injury, venous thromboembolism, pulmonary embolism, pneumonia and surgical wound complication. Even following the propensity score matching, these findings remained consistent and statistically significant. CONCLUSIONS: RA-TKA use in the United States has grown substantially in the last few years and has been associated with significantly reduced immediate post-operative complications and length of hospital stay compared to C-TKA, offering safer surgical management for TKA patients. Further studies on the short- and long-term outcomes of RA-TKA would improve the understanding of the full potential of this technology. LEVELS OF EVIDENCE: Level III.

Evaluating the Reliability of MyotonPro in Assessing Muscle Properties: A Systematic Review of Diagnostic Test Accuracy.

Background and Objectives: Muscle properties are critical for performance and injury risk, with changes occurring due to physical exertion, aging, and neurological conditions. The MyotonPro device offers a non-invasive method to comprehensively assess muscle biomechanical properties. This systematic review evaluates the reliability of MyotonPro across various muscles for diagnostic purposes. Materials and Methods: Following PRISMA guidelines, a comprehensive literature search was conducted in Medline (PubMed), Ovid (Med), Epistemonikos, Embase, Cochrane Library, Clinical trials.gov, and the WHO International Clinical Trials platform. Studies assessing the reliability of MyotonPro across different muscles were included. A methodological quality assessment was performed using established tools, and reviewers independently conducted data extraction. Statistical analysis involved summarizing intra-rater and inter-rater reliability measures across muscles. Results: A total of 48 studies assessing 31 muscles were included in the systematic review. The intra-rater and inter-rater reliability were consistently high for parameters such as frequency and stiffness in muscles of the lower and upper extremities, as well as other muscle groups. Despite methodological heterogeneity and limited data on specific parameters, MyotonPro demonstrated promising reliability for diagnostic purposes across diverse patient populations. Conclusions: The findings suggest the potential of MyotonPro in clinical assessments for accurate diagnosis, treatment planning, and monitoring of muscle properties. Further research is needed to address limitations and enhance the applicability of MyotonPro in clinical practice. Reliable muscle assessments are crucial for optimizing treatment outcomes and improving patient care in various healthcare settings.

Comparison of carrier gases for the separation and quantification of mineral oil hydrocarbon (MOH) fractions using online coupled high performance liquid chromatography-gas chromatography-flame ionisation detection.

On-line coupled high performance liquid chromatography-gas chromatography-flame ionisation detection (HPLC-GC-FID) was used to compare the effect of hydrogen, helium and nitrogen as carrier gases on the chromatographic characteristics for the quantification of mineral oil hydrocarbon (MOH) traces in food related matrices. After optimisation of chromatographic parameters nitrogen carrier gas exhibited characteristics equivalent to hydrogen and helium regarding requirements set by current guidelines and standardisation such as linear range, quantification limit and carry over. Though nitrogen expectedly led to greater peak widths, all required separations of standard compounds were sufficient and humps of saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) were appropriate to enable quantitation similar to situations where hydrogen or helium had been used. Slightly increased peak widths of individual hump components did not affect shapes and widths of the MOSH and MOAH humps were not significantly affected by the use of nitrogen as carrier gas. Notably, nitrogen carrier gas led to less solvent peak tailing and smaller baseline offset. Overall, nitrogen may be regarded as viable alternative to hydrogen or helium and may even extend the range of quantifiable compounds to highly volatile hydrocarbon eluting directly after the solvent peak.

The influence of operation time for hip hemiarthroplasty on complication rates and mortality in patients with femoral neck fracture: a retrospective data analysis.

BACKGROUND: The aim of the present study was to investigate the influence of various factors, in particular operation time, on mortality and complication rates in patients with femoral neck fractures who have undergone hip hemiarthroplasty (HHA) and to determine a cut-off value above which mortality and complication rates increase significantly. METHODS: Cases of patients with femoral neck fracture treated with HHA between 1 January 2017 and 31 December 2023 were screened for eligibility. Multiple logistic regressions were calculated to determine which factors (patient age, experience of surgeon, patient sex, ASA score, time to surgery, operation time) influenced the incidence of complications and mortality. The exact cut-off value for complications and mortality was determined using the Youden index of the ROC curve (sensitivity vs. specificity) of logistic regression. RESULTS: A total of 552 patients were considered eligible for this study. During the 90-day follow-up period after HHA, 50 deaths and 34 complications were recorded, giving a mortality rate of 9.1%, and a complication rate of 6.2%. Of the 34 complications recorded, 32.3% were infections, 14.7% dislocations, 20.7% trochanteric avulsions, 11.8% periprosthetic fractures, 11.8% nerve injuries, and 8.8% deep vein thrombosis. The odds ratio (OR) of a patient experiencing a complication is 2.2% higher for every minute increase in operation time (Exponential Beta - 1 = 0.022; p = 0.0363). The OR of a patient dying is 8.8% higher for each year increase in age (Exponential Beta - 1 = 0.088; p = 0.0007). When surgery was performed by a certified orthopaedic surgeon the mortality rate lowered by 61.5% in comparison to the surgery performed by a trainee (1 - Exponential Beta = 0.594; p = 0.0120). Male patients have a 168.7% higher OR for mortality than female patients (Exponential Beta - 1 = 1.687; p = 0.0017). Patients with an operation time of ≥ 86 min. have a 111.8% higher OR for mortality than patients with an operation time of < 86 min. (Exponential Beta - 1 = 1.118). CONCLUSION: This retrospective data analysis found that the risk of a patient experiencing a complication was 2.2% higher for every minute increase in operation time. Patients with an operation time above the cut-off of 86 min had a 111.8% higher risk of mortality than those with an operation time below the cut-off. Other influencing factors that operators should be aware of include patient age, male sex, and operator experience.

Assessment of Muscle Stiffness Using the MyotonPro: Effects of Fatigue on Vastus Lateralis and Medialis Muscles.

BACKGROUND: The investigation of soft tissue stiffness has garnered increasing interest due to its potential applications in detecting tissue conditions, monitoring therapy effects, and preventing sports injuries. This study utilized the MyotonPro as a reliable measurement device to assess muscle stiffness and muscle frequency in the vastus lateralis and medialis muscles of both the dominant and non-dominant legs. METHODS: Sixteen young, healthy subjects (seven males and nine females, age 25 ± 3.46 years) participated in this study. To induce maximal muscle fatigue, the vastus lateralis and vastus medialis muscles were subjected to a 30 kg load using a single-leg leg press. Pre- and post-fatigue measurements were conducted by two testers on the dominant and non-dominant legs, respectively, employing the MyotonPro. RESULTS: We revealed a significant increase in muscle stiffness after maximal muscle fatigue. Specifically, on the dominant side, the vastus lateralis exhibited a stiffness increase of 6.5%, while the vastus medialis showed a 6.3% increase. On the non-dominant side, the vastus lateralis demonstrated a 7.6% increase, and the vastus medialis exhibited a 6.7% increase in muscle stiffness. Furthermore, muscle frequency increased by 8.6% (vastus lateralis) and 13.5% (vastus medialis) on the dominant side and by 15.1% (vastus lateralis) and 6.3% (vastus medialis) on the non-dominant side. The reliability of the measurements varied, with Cronbach's alpha values ranging from inadequate 0.49 to very good 0.88. CONCLUSION: This study affirms the efficacy of the MyotonPro as a measurement device for assessing muscle stiffness and establishes its reliability. The observed increase in muscle stiffness after maximal muscle fatigue, accompanied by changes in muscle frequency, underscores the device's utility. However, further research is warranted to validate the reproducibility of these findings and explore additional facets of the muscular response to fatigue.

Inferior patellar mobility before and after knee arthroplasty: A comparison with healthy knees.

PURPOSE: The aim of this study was to evaluate patellar mobility in patients before and after knee arthroplasty (KA) and compare it with that of healthy subjects. It was hypothesised that patellar mobility is diminished in patients with osteoarthritis (OA) and remains unchanged after KA. METHODS: A total of 101 patients (59 females and 42 males) with a mean age of 70.9 ± 9.9 years underwent KA and were compared with 25 healthy individuals (seven females and 18 males) with a mean age of 32.3 ± 9.3 years. Mediolateral patellar displacement was measured by applying a force of 10 N, and the medial and lateral patellar shifts were recorded separately using a validated novel patellostabilometer. Patients were examined preoperatively and at 3 months postoperatively, assessing the range of knee motion and the clinical and functional status based on the Oxford Knee Score (OKS), Kujala Score, subjective Knee Society Score (sKSS), Forgotten Joint Score (FJS) and Western Ontario and McMaster Universities Arthritis Index (WOMAC). RESULTS: Total patellar displacement was 42.1 ± 6 mm for healthy subjects, 31 ± 6 mm before surgery and 32.8 ± 7.8 mm after surgery in osteoarthritic patients (p < 0.01). The mean lateral patellar shift differed significantly between healthy individuals (17.9 ± 4 mm) and osteoarthritic patients (15.1 ± 6 mm) (p < 0.01). The mean medial patellar mobility of healthy individuals (24.2 ± 7 mm) was significantly greater than that of osteoarthritic patients (15.8 ± 4.8 mm) (p < 0.01). All scores improved significantly postoperatively. No correlation was found between patellar mobility and OKS, Kujala Score, sKSS, FJS and WOMAC (r = -0.11). Improvement in patellar mobility also showed no correlation with clinical outcomes according to OKS, Kujala Score, sKSS, FJS and WOMAC (r = 0.08). CONCLUSION: This study has demonstrated reduced patellar mobility in patients with OA. While patellar mobility significantly improved after KA, it may not hold clinical significance (p = 0.04). No impact on clinical outcome can be expected when the presurgical patella mobility is preserved in KA. LEVEL OF EVIDENCE: Level IV.

Patient-related Predictors for the Functional Outcome of SuperPATH Hemiarthroplasty versus Conventional Approach Hemiarthroplasty: A Systematic Review and Meta-regression Analysis of Randomized Controlled Trials.

Specialist literature lacks evidence that explores associations between patient characteristics and the beneficial treatment effect of SuperPATH hemiarthroplasty (HA) compared with conventional approach (CA) HA. To investigate and identify patient-related predictors of the effect size of the short-term functional outcome of SuperPATH HA and CA HA by performing a systematic review and meta-regression analysis of randomized controlled trials (RCTs). A systematic search of literature was performed in PubMed, CNKI, CENTRAL of The Cochrane Library, Clinical trials, and Google Scholar until August 25, 2023. For the continuous outcome parameter Harris hip score (HHS) ≤1 week and 3 months postoperatively, mean differences (MDs) with 95% confidence intervals (CIs) were calculated. A meta-regression analysis was based on random-effects meta-analysis using the Hartung-Knapp-Sidik-Jonkman method for continuous covariates. A total of five RCTs with 404 patients were found. The following predictors of HHS ≤1 week postoperatively were identified: patient age (predictor estimate = 1.29; p < 0.01), patient age groups (predictor estimate = 14.07; p < 0.01), time to mobilization (predictor estimate = 5.51; p < 0.01). The following predictors of HHS 3 months postoperatively were identified: incision length (predictor estimate = -2.12; p < 0.01); intraoperative blood loss (predictor estimate = 0.02; p < 0.01). Patient age, time to mobilization, incision length, and intraoperative blood loss were identified as predictors of the effect size of early postoperative functional outcome as measured by HHS. Elderly patients, particularly those over 70 years of age, appear to benefit from SuperPATH HA. Based on these findings, and taking into account our limitations, we recommend that the use of minimally invasive SuperPATH HA in elderly patients should be more widely considered and not limited to elective THA patients.

High three-dimensional accuracy of component placement and lower limb alignment using a robotic arm-assisted system and gap-balancing instrument in total knee arthroplasty.

PURPOSE: It was hypothesized that robotic arm-assisted total knee arthroplasty (RA-TKA) using additionally a gap-balancing instrumentation will show high accuracy in executing the planning in femoral and tibial component placement throughout the range of knee motion (ROM) during TKA surgery. METHODS: Prospectively collected data were analysed for patients undergoing RA-TKA. A cruciate retaining cemented design was implanted using the MAKO® robotic system. Lower limb alignment at 0°, 30°, 45°, 60° and 90° of flexion was recorded at the beginning of surgery and finally after implantation of the components. A ligament tensioner was inserted after tibial precut to measure the extension and flexion gap, and final component placement was planned based on 3D CT images. Femoral and tibial component placement was measured in all three planes. RESULTS: A total of 104 patients were included (mean age 69.4 ± 9 years; 44 male, 60 female). The difference in component placement after planning and final implantation showed less valgus of 0.7° ± 1.4° (p < 0.001), less external rotation of 0.6° ± 1.9° (p = 0.001) and less flexion of 0.9° ± 1.8° (p < 0.001) for the femoral component. The tibial component was placed in more varus of 0.2° ± 0.9° (p = 0.056) and more posterior slope of 0.5° ± 0.9° (p < 0.001). The lower limb alignment in extension was 4.4° ± 5.2° of varus of the native knee and changed to 1.2° ± 1.9° of varus after TKA (p < 0.01). CONCLUSION: Robotic-assisted TKA helps to achieve the target of alignment and component placement very close to the planning. It allows optimal component placement of off-the-shelf implants respecting patient's specific anatomy. LEVEL OF EVIDENCE: Level II.

Adaptive Force of hamstring muscles is reduced in patients with knee osteoarthritis compared to asymptomatic controls.

BACKGROUND: Quadriceps strength deficits are known for patients with knee osteoarthritis (OA), whereas findings on hamstrings are less clear. The Adaptive Force (AF) as a special neuromuscular function has never been investigated in OA before. The maximal adaptive holding capacity (max. isometric AF; AFisomax) has been considered to be especially vulnerable to disruptive stimuli (e.g., nociception). It was hypothesized that affected limbs of OA patients would show clear deficits in AFisomax. METHODS: AF parameters and the maximal voluntary isometric contraction (MVIC) of hamstrings were assessed bilaterally comparing 20 patients with knee OA (ART) vs. controls (CON). AF was measured by a pneumatically driven device. Participants were instructed to maintain a static position despite an increasing load of the device. After reaching AFisomax, the hamstrings merged into eccentric action whereby the force increased further to the maximum (AFmax). MVIC was recorded before and after AF trials. Mixed ANOVA was used to identify differences between and within ART and CON (comparing 1st and 2nd measured sides). RESULTS: AFisomax and the torque development per degree of yielding were significantly lower only for the more affected side of ART vs. CON (p ≤ 0.001). The percentage difference of AFisomax amounted to - 40%. For the less affected side it was - 24% (p = 0.219). MVIC and AFmax were significantly lower for ART vs. CON for both sides (p ≤ 0.001). Differences of MVIC between ART vs. CON amounted to - 27% for the more, and - 30% for the less affected side; for AFmax it was - 34% and - 32%, respectively. CONCLUSION: The results suggest that strength deficits of hamstrings are present in patients with knee OA possibly attributable to nociception, generally lower physical activity/relief of lower extremities or fear-avoidance. However, the more affected side of OA patients seems to show further specific impairments regarding neuromuscular control reflected by the significantly reduced adaptive holding capacity and torque development during adaptive eccentric action. It is assumed that those parameters could reflect possible inhibitory nociceptive effects more sensitive than maximal strengths as MVIC and AFmax. Their role should be further investigated to get more specific insights into these aspects of neuromuscular control in OA patients. The approach is relevant for diagnostics also in terms of severity and prevention.

[Magnetic resonance imaging of the knee joint : What does the orthopedic surgeon expect from the radiologist?] / Magnetresonanztomographie des Kniegelenks : Was erwartet der Kliniker vom Radiologen?

Magnet resonance imaging (MRI) offers a precise visualization of structural changes with high sensitivity and specificity. However, not all these soft tissue damages or bony lesions are clinically relevant or require treatment. Therefore, it is important to provide the radiologist with a specific clinical request when asking for an MRI examination of the knee. In this article, all important anatomical structures of the knee joint will be addressed with emphasis on the relevant questions for the radiologist. Based on the clinical examination, the MRI provides information about the damage of anatomical structures. This information is of utmost importance for therapeutic decision-making in order to allow an adequate and personalized treatment of patients.

eCerto-versatile software for interlaboratory data evaluation and documentation during reference material production.

The statistical tool eCerto was developed for the evaluation of measurement data to assign property values and associated uncertainties of reference materials. The analysis is based on collaborative studies of expert laboratories and was implemented using the R software environment. Emphasis was put on comparability of eCerto with SoftCRM, a statistical tool based on the certification strategy of the former Community Bureau of Reference. Additionally, special attention was directed towards easy usability from data collection through processing, archiving, and reporting. While the effects of outlier removal can be flexibly explored, eCerto always retains the original data set and any manipulation such as outlier removal is (graphically and tabularly) documented adequately in the report. As a major reference materials producer, the Bundesanstalt für Materialforschung und -prüfung (BAM) developed and will maintain a tool to meet the needs of modern data processing, documentation requirements, and emerging fields of RM activity. The main features of eCerto are discussed using previously certified reference materials.

Postoperative Activity and Knee Function of Patients after Total Knee Arthroplasty: A Sensor-Based Monitoring Study.

Inertial measurement units (IMUs) are increasingly being used to assess knee function. The aim of the study was to record patients' activity levels and to detect new parameters for knee function in the early postoperative phase after TKA. Twenty patients (n = 20) were prospectively enrolled. Two sensors were attached to the affected leg. The data were recorded from the first day after TKA until discharge. Algorithms were developed for detecting steps, range of motion, horizontal, sitting and standing postures, as well as physical therapy. The mean number of steps increased from day 1 to discharge from 117.4 (SD ± 110.5) to 858.7 (SD ± 320.1), respectively. Patients' percentage of immobilization during daytime (6 a.m. to 8 p.m.) was 91.2% on day one and still 69.9% on the last day. Patients received daily continuous passive motion therapy (CPM) for a mean of 36.4 min (SD ± 8.2). The mean angular velocity at day 1 was 12.2 degrees per second (SD ± 4.4) and increased to 28.7 (SD ± 16.4) at discharge. This study shows that IMUs monitor patients' activity postoperatively well, and a wide range of interindividual motion patterns was observed. These sensors may allow the adjustment of physical exercise programs according to the patient's individual needs.

Development of the INpaTiEnt Rehabilitation App Compliance QuesTionnaire [INTERACT].

BACKGROUND: The elements of previously designed questionnaires do not take into consideration the burdens encountered in an inpatient hospital setting. The purpose of this study is to validate elements of a non-compliance survey in an in-hospital setting and discuss aspects of compliance with telerehabilitative physiotherapy in the early postoperative period. METHODS: A literature search was conducted to identify elements that prevent patients from performing their prescribed physical therapy exercises. These items were then evaluated by the expert review technique as described by Ikart. Afterwards, the synthesized survey was handed out to patients for the assessment of the quality of its items. RESULTS: The results of the expert review technique identified some conceptual and grammatical problems. This led to the adjustment of some of the elements. The quality of the resulting questionnaire was deemed to be good, as patients were able to fully understand the concepts and answer accordingly. A statistical analysis was conducted to evaluate the responses. CONCLUSIONS: The items of this second questionnaire have proven to be reliable to assess the compliance of patients in an in-hospital setting. These items will be added to the cross-culturally adapted items of a previous questionnaire.

ESSKA consensus initiative: why, when and how?

The goal of a Consensus in clinical practice is to provide daily practitioners with evidence- based recommendations on data from the literature, clinical expertise and expectations of professionals and patients. In this context, a consensus aligns with the principles of evidence-based medicine in clinical practice and is consequently regarded as a scientific work of a certain level of evidence (LOE). It is expected that such a project may contribute to filling the gap observed between scientific evidence and reality of the daily practice.A Clinical Consensus is particularly needed for those topics that are of interest to daily practice but controversial due to lack of evidence, and for which expert agreement can provide valuable support in reaching conclusions.A Consensus requires a strict methodology, based on two principles: an iterative process with independence of the involved groups and pluralism (geographical and professional representation). These processes guarantee the scientific quality of the recommendations.Among the various consensus modalities, ESSKA has adopted the Formal Consensus derived from the Delphi method, and the RAND/UCLA appropriateness method. These two methods are complementary. The first one, based on questions-answers sets, is particularly suitable for questions of terminology, diagnosis, planning, strategy. The second one is based on the concept of scenarios, particularly adapted to treatment indications. These two methods can also be used within the same consensus.The aim of this article is to define what is a consensus initiative, to detail the methodology ESSKA has chosen, and to point out the key role of the dissemination.

Improving the reliability of measurements in orthopaedics and sports medicine.

A large space still exists for improving the measurements used in orthopaedics and sports medicine, especially as we face rapid technological progress in devices used for diagnostic or patient monitoring purposes. For a specific measure to be valuable and applicable in clinical practice, its reliability must be established. Reliability refers to the extent to which measurements can be replicated, and three types of reliability can be distinguished: inter-rater, intra-rater, and test-retest. The present article aims to provide insights into reliability as one of the most important and relevant properties of measurement tools. It covers essential knowledge about the methods used in orthopaedics and sports medicine for reliability studies. From design to interpretation, this article guides readers through the reliability study process. It addresses crucial issues such as the number of raters needed, sample size calculation, and breaks between particular trials. Different statistical methods and tests are presented for determining reliability depending on the type of gathered data, with particular attention to the commonly used intraclass correlation coefficient.