Measurement of Direct-Photon Cross Section and Double-Helicity Asymmetry at sqrt[s]=510 GeV in p[over →]+p[over →] Collisions.

We present measurements of the cross section and double-helicity asymmetry A_{LL} of direct-photon production in p[over →]+p[over →] collisions at sqrt[s]=510 GeV. The measurements have been performed at midrapidity (|η|<0.25) with the PHENIX detector at the Relativistic Heavy Ion Collider. At relativistic energies, direct photons are dominantly produced from the initial quark-gluon hard scattering and do not interact via the strong force at leading order. Therefore, at sqrt[s]=510 GeV, where leading-order-effects dominate, these measurements provide clean and direct access to the gluon helicity in the polarized proton in the gluon-momentum-fraction range 0.02

Simulated Performance of Laser-Machined Metamaterial Anti-reflection Coatings.

Lenslet-coupled antenna arrays have been used in CMB experiments and are the baseline technology for the next-generation satellite missions such as LiteBIRD and PICO. Lenslets are small hemispherical lenses mounted on the focal plane that couple light to the detectors and are typically made of silicon or alumina due to their high focusing power and low absorption loss. To minimize reflection at the vacuum-dielectric interface, lenslets require anti-reflection (AR) coatings. Metamaterials have been used in large microwave optical components because they avoid any mismatch on the thermal expansion between the lens and its coating, but so far they have only been machined on surfaces of comparatively large radius of curvature. As a first step to understand the feasibility of machining metamaterial AR layers in lenslets through laser-etching for the LiteBIRD mission, a model in ANSYS HFSS was developed. The goal of the simulation was to optimize transmission in three frequency bands while meeting assumed laser machinability constraints and optical requirements. Simulation results from flat silicon show that an AR metamaterial coating made under the assumed conditions is feasible, and the baseline parameters for further curved-surface studies are provided.

Coupled reaction-diffusion transport into a core-shell geometry.

The coupled reaction-diffusion transport of glucose and oxygen into a core-shell geometry is modeled using dimensionless parameterization. The consumption of oxygen and glucose are coupled by a metabolic modulation function. The results are fit to a Bayesian-Ridge model that can be easily applied to generate large data sets spanning the parameter space. The non-linear correlation between the oxygen and glucose concentrations are presented and the effect of system parameters is explored. The maximum radius of a viable system is shown to decrease by up to 13.8% with high glucose saturation.

Modeling of reaction-diffusion transport into a core-shell geometry.

Fickian diffusion into a core-shell geometry is modeled. The interior core mimics pancreatic Langerhan islets and the exterior shell acts as inert protection. The consumption of oxygen diffusing into the cells is approximated using Michaelis-Menten kinetics. The problem is transformed to dimensionless units and solved numerically. Two regimes are identified, one that is diffusion limited and the other consumption limited. A regression is fit that describes the concentration at the center of the cells as a function of the relevant physical parameters. It is determined that, in a cell culture environment, the cells will remain viable as long as the islet has a radius of around 142 µm or less and the encapsulating shell has a radius of less than approximately 283 µm. When the islet is on the order of 100 µm it is possible for the cells to remain viable in environments with as little as 4.6×10-2 mol/m-3 O2. These results indicate such an encapsulation scheme may be used to prepare artificial pancreas to treat diabetes.

Pseudorapidity Dependence of Particle Production and Elliptic Flow in Asymmetric Nuclear Collisions of p+Al, p+Au, d+Au, and

Asymmetric nuclear collisions of p+Al, p+Au, d+Au, and ^{3}He+Au at sqrt[s_{NN}]=200 GeV provide an excellent laboratory for understanding particle production, as well as exploring interactions among these particles after their initial creation in the collision. We present measurements of charged hadron production dN_{ch}/dη in all such collision systems over a broad pseudorapidity range and as a function of collision multiplicity. A simple wounded quark model is remarkably successful at describing the full data set. We also measure the elliptic flow v_{2} over a similarly broad pseudorapidity range. These measurements provide key constraints on models of particle emission and their translation into flow.

Molecular Dynamics Modeling of the Structure and Na+-Ion Transport in Na2S + SiS2 Glassy Electrolytes.

Solid-state sodium batteries, a relatively safe and potentially cost-effective energy-storage technology, have attracted increasing scientific attention recently for application in stationary grid-scale energy storage. Identifying solid electrolytes with high electrochemical stability and high Na+-ion conductivity at room temperature is critically important to enable high energy densities with enhanced rate capabilities. We evaluated sodium sulfide-silicon sulfide, xNa2S + (1- x)SiS2, glasses as potential glassy solid electrolytes (GSEs) using molecular dynamics (MD) simulations. We employed ab initio MD to determine ion conduction mechanisms, to calculate energy barriers for ion hops, and to correlate these to the local short-range structure of 0.50Na2S + 0.50SiS2 glass. To simulate much larger systems for accurately calculating the ionic conductivity, we parameterized empirical Buckingham-type potential and performed classical MD simulations. After validating these calculations by comparing the structure obtained from MD to that from X-ray scattering data, we calculated the ionic conductivity of these glasses for the range of 0.33 ≤ x ≤ 0.67 compositions. The calculated ionic conductivities at room temperature were in the range of ∼10-5 S/cm for the x = 0.50 composition and increased significantly with sodium sulfide ( x) content. These calculations provide theoretical insights into the role of Na2S content on the ionic conductivity of GSEs aiding in the selection of specific compositions to enhance the ionic conductivity.

Centrality-Dependent Modification of Jet-Production Rates in Deuteron-Gold Collisions at √[s(NN)]=200 GeV.

Jet production rates are measured in p+p and d+Au collisions at sqrt[s_{NN}]=200 GeV recorded in 2008 with the PHENIX detector at the Relativistic Heavy Ion Collider. Jets are reconstructed using the R=0.3 anti-k_{t} algorithm from energy deposits in the electromagnetic calorimeter and charged tracks in multiwire proportional chambers, and the jet transverse momentum (p_{T}) spectra are corrected for the detector response. Spectra are reported for jets with 12

Measurements of Elliptic and Triangular Flow in High-Multiplicity 3He+Au Collisions at √(s(NN))=200 GeV.

We present the first measurement of elliptic (v(2)) and triangular (v(3)) flow in high-multiplicity (3)He+Au collisions at √(s(NN))=200 GeV. Two-particle correlations, where the particles have a large separation in pseudorapidity, are compared in (3)He+Au and in p+p collisions and indicate that collective effects dominate the second and third Fourier components for the correlations observed in the (3)He+Au system. The collective behavior is quantified in terms of elliptic v(2) and triangular v(3) anisotropy coefficients measured with respect to their corresponding event planes. The v(2) values are comparable to those previously measured in d+Au collisions at the same nucleon-nucleon center-of-mass energy. Comparisons with various theoretical predictions are made, including to models where the hot spots created by the impact of the three (3)He nucleons on the Au nucleus expand hydrodynamically to generate the triangular flow. The agreement of these models with data may indicate the formation of low-viscosity quark-gluon plasma even in these small collision systems.

Oriented polyvinylidene fluoride-trifluoroethylene (P(VDF-TrFE)) films by Langmuir-Blodgett deposition: a synchrotron X-ray diffraction study.

Langmuir-Blodgett films of polyvinylidene fluoride trifluoroethylene - P(VDF-TrFE)-copolymers possess substantially improved electrocaloric and pyroelectric properties, when compared with conventionally spin-cast films. In order to rationalize this, we prepared single-layered films of P(VDF-TrFE) (70 : 30) using both deposition techniques. Grazing incidence wide-angle X-ray scattering (GIWAXS), reveals that Langmuir-Blodgett deposited films have a higher concentration of the ferroelectric ß-phase crystals, and that these films are highly oriented with respect to the substrate. Based on these observations, we suggest alternative means of deposition, which may substantially enhance the electrocaloric effect in P(VDF-TrFE) films. This development has significant implications for the potential use of P(VDF-TrFE) in solid-state refrigeration.

NF-κB inhibition reveals a novel role for HGF during skeletal muscle repair.

The transcription factor nuclear factor κB (NF-κB)/p65 is the master regulator of inflammation in Duchenne muscular dystrophy (DMD). Disease severity is reduced by NF-κB inhibition in the mdx mouse, a murine DMD model; however, therapeutic targeting of NF-κB remains problematic for patients because of its fundamental role in immunity. In this investigation, we found that the therapeutic effect of NF-κB blockade requires hepatocyte growth factor (HGF) production by myogenic cells. We found that deleting one allele of the NF-κB subunit p65 (p65+/-) improved the survival and enhanced the anti-inflammatory capacity of muscle-derived stem cells (MDSCs) following intramuscular transplantation. Factors secreted from p65+/- MDSCs in cell cultures modulated macrophage cytokine expression in an HGF-receptor-dependent manner. Indeed, we found that following genetic or pharmacologic inhibition of basal NF-κB/p65 activity, HGF gene transcription was induced in MDSCs. We investigated the role of HGF in anti-NF-κB therapy in vivo using mdx;p65+/- mice, and found that accelerated regeneration coincided with HGF upregulation in the skeletal muscle. This anti-NF-κB-mediated dystrophic phenotype was reversed by blocking de novo HGF production by myogenic cells following disease onset. HGF silencing resulted in increased inflammation and extensive necrosis of the diaphragm muscle. Proteolytic processing of matrix-associated HGF is known to activate muscle stem cells at the earliest stages of repair, but our results indicate that the production of a second pool of HGF by myogenic cells, negatively regulated by NF-κB/p65, is crucial for inflammation resolution and the completion of repair in dystrophic skeletal muscle. Our findings warrant further investigation into the potential of HGF mimetics for the treatment of DMD.

Complex borides based on AlLiB14 as high-temperature thermoelectric compounds.

AlLiB14 is examined as a potential high-temperature thermoelectric material. First-principles methods are used to investigate the thermoelectric behavior and it is found to have a band gap of 2.13 eV, and an electronic dispersion with characteristic indicative of having a high Seebeck coefficient. Semiclassical Boltzmann transport theory predicts that AlLiB14 will have a Seebeck coefficient greater than 200 µV K(-1), at temperatures near 1000 K and carrier concentrations around 1 × 10(20) cm(-3). Using a elasticity based expression for the thermal conductivity, the thermoelectric figure of merit is approximated to be 0.45 × 10(-3) T at moderate doping levels.

Exploiting intrinsic triangular geometry in relativistic (3)He+Au collisions to disentangle medium properties.

Recent results in d+Au and p+Pb collisions at RHIC and the LHC provide evidence for collective expansion and flow of the created medium. We propose a control set of experiments to directly compare particle emission patterns from p+Pb, d+Au, and ^{3}He+Au or t+Au collisions at the same sqrt[s_{NN}] . Using a Monte Carlo Glauber simulation we find that a ^{3}He or triton projectile, with a realistic wave function description, induces a significant intrinsic triangular shape to the initial medium. If the system lives long enough, this survives into a significant third-order flow moment v_{3} even with viscous damping. By comparing systems with one, two, and three initial hot spots, one could disentangle the effects from the initial spatial distribution of the deposited energy and viscous damping. These are key tools for answering the question of how small a droplet of matter is necessary to form a quark-gluon plasma described by nearly inviscid hydrodynamics.

Effect of microfiltration concentration factor on serum protein removal from skim milk using spiral-wound polymeric membranes.

Our objective was to determine the effect of concentration factor (CF) on the removal of serum protein (SP) from skim milk during microfiltration (MF) at 50 °C using a 0.3-µm-pore-size spiral-wound (SW) polymeric polyvinylidene fluoride (PVDF) membrane. Pasteurized (72°C for 16 s) skim milk was MF (50 °C) at 3 CF (1.50, 2.25, and 3.00×), each on a separate day of processing starting with skim milk. Two phases of MF were used at each CF, with an initial startup-stabilization phase (40 min in full recycle mode) to achieve the desired CF, followed by a steady-state phase (90-min feed-and-bleed with recycle) where data was collected. The experiment was replicated 3 times, and SP removal from skim milk was quantified at each CF. System pressures, flow rates, CF, and fluxes were monitored during the 90-min run. Permeate flux increased (12.8, 15.3, and 19.0 kg/m(2) per hour) with decreasing CF from 3.00 to 1.50×, whereas fouled water flux did not differ among CF, indicating that the effect of membrane fouling on hydraulic resistance of the membrane was similar at all CF. However, the CF used when microfiltering skim milk (50°C) with a 0.3-µm polymeric SW PVDF membrane did affect the percentage of SP removed. As CF increased from 1.50 to 3.00×, the percentage of SP removed from skim milk increased from 10.56 to 35.57%, in a single stage bleed-and-feed MF system. Percentage SP removal from skim milk was lower than the theoretical value. Rejection of SP during MF of skim milk with SW PVDF membranes was caused by fouling of the membrane, not by the membrane itself and differences in the foulant characteristic among CF influenced SP rejection more than it influenced hydraulic resistance. We hypothesize that differences in the conditions near the surface of the membrane and within the pores during the first few minutes of processing, when casein micelles pass through the membrane, influenced the rejection of SP because more pore size narrowing and plugging occurred at low CF than at high CF due to a slower rate of gel layer formation at low CF. It is possible that percentage removal of SP from skim milk at 50 °C could be improved by optimization of the membrane pore size, feed solution composition and concentration, and controlling the rate of formation of the concentration polarization-derived gel layer at the surface of the membrane during the first few minutes of processing.

Substitutional C on B sites in AlLiB14.

The effect of C substitution in the AlLiB14 lattice is examined using first-principles methods. The inter-icosahedra B site is found to be the most favorable B site for C substitution and the formation energy is predicted to be 1.7 eV in B-rich conditions. Substituting C does not affect the band gap, nor does it introduce defect states to the gap. An ideal brittle cleavage model is used to study the impact of C doping on the mechanical properties of AlLiB14, and it is concluded that introducing C to the crystal decreases the ideal fracture strength by 3.3 GPa, which is about a 12% reduction in overall strength.

Fracture strength of AlLiB14.

The orthorhombic boride crystal family XYB14, where X and Y are metal atoms, plays a critical role in a unique class of superhard compounds, yet there have been no studies aimed at understanding the origin of the mechanical strength of this compound. We present here the results from a comprehensive investigation into the fracture strength of the archetypal AlLiB14 crystal. First principles, ab initio, methods are used to determine the ideal brittle cleavage strength for several high-symmetry orientations. The elastic tensor and the orientation-dependent Young's modulus are calculated. From these results the lower bound fracture strength of AlLiB14 is predicted to be between 29 and 31 GPa, which is near the measured hardness reported in the literature. These results indicate that the intrinsic strength of AlLiB14 is limited by the interatomic B-B bonds that span between the B layers.

Non-Arrhenius ionic conductivities in glasses due to a distribution of activation energies.

Previously observed non-Arrhenius behavior in fast ion conducting glasses [J. Kincs and S. W. Martin, Phys. Rev. Lett. 76, 70 (1996)] occurs at temperatures near the glass transition temperature, T(g), and is attributed to changes in the ion mobility due to ion trapping mechanisms that diminish the conductivity and result in a decreasing conductivity with increasing temperature. It is intuitive that disorder in glass will also result in a distribution of the activation energies (DAE) for ion conduction, which should increase the conductivity with increasing temperature, yet this has not been identified in the literature. In this Letter, a series of high precision ionic conductivity measurements are reported for 0.5Na(2)S + 0.5[xGeS(2) + (1-x)PS(5/2)] glasses with compositions ranging from 0 ≤ x ≤ 1. The impact of the cation site disorder on the activation energy is identified and explained using a DAE model. The absence of the non-Arrhenius behavior in other glasses is explained and it is predicted which glasses are expected to accentuate the DAE effect on the ionic conductivity.

Production efficiency of micellar casein concentrate using polymeric spiral-wound microfiltration membranes.

Most current research has focused on using ceramic microfiltration (MF) membranes for micellar casein concentrate production, but little research has focused on the use of polymeric spiral-wound (SW) MF membranes. A method for the production of a serum protein (SP)-reduced micellar casein concentrate using SW MF was compared with a ceramic MF membrane. Pasteurized (79°C, 18s) skim milk (1,100 kg) was microfiltered at 50°C [about 3 × concentration] using a 0.3-µm polyvinylidene fluoride spiral-wound membrane, bleed-and-feed, 3-stage process, using 2 diafiltration stages, where the retentate was diluted 1:2 with reverse osmosis water. Skim milk, permeate, and retentate were analyzed for SP content, and the reduction of SP from skim milk was determined. Theoretically, 68% of the SP content of skim milk can be removed using a single-stage 3× MF. If 2 subsequent water diafiltration stages are used, an additional 22% and 7% of the SP can be removed, respectively, giving a total SP removal of 97%. Removal of SP greater than 95% has been achieved using a 0.1-µm pore size ceramic uniform transmembrane pressure (UTP) MF membrane after a 3-stage MF with diafiltration process. One stage of MF plus 2 stages of diafiltration of 50°C skim milk using a polyvinylidene fluoride polymeric SW 0.3-µm membrane yielded a total SP reduction of only 70.3% (stages 1, 2, and 3: 38.6, 20.8, and 10.9%, respectively). The SP removal rate for the polymeric SW MF membrane was lower in all 3 stages of processing (stages 1, 2, and 3: 0.05, 0.04, and 0.03 kg/m(2) per hour, respectively) than that of the comparable ceramic UTP MF membrane (stages 1, 2, and 3: 0.30, 0.11, and 0.06 kg/m(2) per hour, respectively), indicating that SW MF is less efficient at removing SP from 50°C skim milk than the ceramic UTP system. To estimate the number of steps required for the SW system to reach 95% SP removal, the third-stage SP removal rate (27.4% of the starting material SP content) was used to extrapolate that an additional 5 water diafiltration stages would be necessary, for a total of 8 stages, to remove 95% of the SP from skim milk. The 8-plus stages necessary to remove >95% SP for the SW MF membrane would create more permeate and a lengthier process than required with ceramic membranes.

Urokinase-type plasminogen activator and arthritis progression: role in systemic disease with immune complex involvement.

INTRODUCTION: Urokinase-type plasminogen activator (u-PA) has been implicated in fibrinolysis, cell migration, latent cytokine activation, cell activation, T-cell activation, and tissue remodeling, all of which are involved in the development of rheumatoid arthritis. Previously, u-PA has been reported to play a protective role in monoarticular arthritis models involving mBSA as the antigen, but a deleterious role in the systemic polyarticular collagen-induced arthritis (CIA) model. The aim of the current study is to determine how u-PA might be acting in systemic arthritis models. METHODS: The CIA model and bone marrow chimeras were used to determine the cellular source of u-PA required for the arthritis development. Gene expression of inflammatory and destructive mediators was measured in joint tissue by quantitiative PCR and protein levels by ELISA. The requirement for u-PA in the type II collagen mAb-induced arthritis (CAIA) and K/BxN serum transfer arthritis models was determined using u-PA(-/-) mice. Neutrophilia was induced in the peritoneal cavity using either ovalbumin/anti-ovalbumin or the complement component C5a. RESULTS: u-PA from a bone marrow-derived cell was required for the full development of CIA. The disease in u-PA(-/-) mice reconstituted with bone marrow from C57BL/6 mice was indistinguishable from that in C57BL/6 mice, in terms of clinical score, histologic features, and protein and gene expression of key mediators. u-PA(-/-) mice were resistant to both CAIA and K/BxN serum transfer arthritis development. u-PA(-/-) mice developed a reduced neutrophilia and chemokine production in the peritoneal cavity following ovalbumin/anti-ovalbumin injection; in contrast, the peritoneal neutrophilia in response to C5a was u-PA independent. CONCLUSIONS: u-PA is required for the full development of systemic arthritis models involving immune complex formation and deposition. The cellular source of u-PA required for CIA is bone marrow derived and likely to be of myeloid origin. For immune complex-mediated peritonitis, and perhaps some other inflammatory responses, it is suggested that the u-PA involvement may be upstream of C5a signaling.

High levels of HIF-2alpha highlight an immature neural crest-like neuroblastoma cell cohort located in a perivascular niche.

High HIF-2alpha protein levels in the sympathetic nervous system-derived childhood tumour neuroblastoma as well as immature phenotype correlate to unfavourable outcome. Here we show that a small subset of perivascularly located, strongly HIF-2alpha-positive tumour cells (MYCN amplified) lacks expression of differentiation markers, but expresses neural crest and early sympathetic progenitor marker genes such as Notch-1, HES-1, c-Kit, dHAND, and vimentin. HIF-2alpha- and CD68-positive tumour-associated macrophages were frequently found close to the immature and HIF-2alpha-positive neuroblastoma cells and as VEGF levels are high in the perivascular niche, we hypothesize that neuroblastoma neural crest-like cells and macrophages cooperate to facilitate angiogenesis and thereby contribute to the aggressive neuroblastoma phenotype.