Designing Composite Stimuli-Responsive Hydrogels for Wound Healing Applications: The State-of-the-Art and Recent Discoveries.

Effective wound treatment has become one of the most important challenges for healthcare as it continues to be one of the leading causes of death worldwide. Therefore, wound care technologies significantly evolved in order to provide a holistic approach based on various designs of functional wound dressings. Among them, hydrogels have been widely used for wound treatment due to their biocompatibility and similarity to the extracellular matrix. The hydrogel formula offers the control of an optimal wound moisture level due to its ability to absorb excess fluid from the wound or release moisture as needed. Additionally, hydrogels can be successfully integrated with a plethora of biologically active components (e.g., nanoparticles, pharmaceuticals, natural extracts, peptides), thus enhancing the performance of resulting composite hydrogels in wound healing applications. In this review, the-state-of-the-art discoveries related to stimuli-responsive hydrogel-based dressings have been summarized, taking into account their antimicrobial, anti-inflammatory, antioxidant, and hemostatic properties, as well as other effects (e.g., re-epithelialization, vascularization, and restoration of the tissue) resulting from their use.

Gypsum-Related Impact on Antibiotic-Loaded Composite Based on Highly Porous Hydroxyapatite-Advantages and Disadvantages.

Highly porous hydroxyapatite is sometimes considered toxic and useless as a biomaterial for bone tissue regeneration because of the high adsorption of calcium and phosphate ions from cell culture media. This negatively affects the osteoblast's growth in such ion-deprived media and suggests "false cytotoxicity" of tested hydroxyapatite. In our recent study, we showed that a small addition of calcium sulfate dihydrate (CSD) may compensate for this adsorption without a negative effect on other properties of hydroxyapatite-based biomaterials. This study was designed to verify whether such CSD-supplemented biomaterials may serve as antibiotic carriers. FTIR, roughness, mechanical strength analysis, drug release, hemocompatibility, cytotoxicity against human osteoblasts, and antibacterial activity were evaluated to characterize tested biomaterials. The results showed that the addition of 1.75% gypsum and gentamicin caused short-term calcium ion compensation in media incubated with the composite. The combination of both additives also increased antibacterial activity against bacteria representative of bone infections without affecting osteoblast proliferation, hemocompatibility, and mechanical parameters. Thus, gypsum and antibiotic supplementation may provide advanced functionality for bone-regeneration materials based on hydroxyapatite of a high surface area and increasingly high Ca2+ sorption capacity.

Comparing the Healing Abilities of Fluorapatite and Hydroxyapatite Ceramics in Regenerating Bone Tissue: An In Vivo Study.

Some reports in the literature show the advantages of fluoride-containing apatite ceramics over hydroxyapatite (HAP), at least in some aspects. While HAP has been used extensively in the treatment of bone defects, fluoridated apatite has hardly been tested in vivo. In order to verify the biological properties of fluoride-doped apatite and to assess its therapeutic potential, we synthesized fluorapatite (FAP) and applied it as a filling in bone defects of experimental animals (rabbits). The treatment effects were evaluated on extracted bones after 3 and 6 months from implantation using peripheral quantitative computed tomography (pQCT), dual-energy X-ray absorptiometry (DXA), radiography (X-ray) and histological staining. The study proved the integration between FAP and the bone tissue, thus indicating its stimulating effect on new bone formation and mineralization. The results achieved after 3 months of treatment were difficult to interpret unequivocally and suggested the transient delay in FAP integration of bone in comparison with HAP. The reasons for this phenomenon are unclear. Most likely, these differences between FAP and HAP resulted mainly from the different porosities, densities and ionic reactivity of the ceramics, which in our opinion affected their solubility, integration and degree of bone tissue resorption. However, it was shown that 6 months after implantation, similar level of bone defect regeneration was achieved for both FAP and HAP. In this article, we present our hypothesis concerning the basis of this phenomenon.

Poly(levodopa)-Functionalized Polysaccharide Hydrogel Enriched in Fe3O4 Particles for Multiple-Purpose Biomedical Applications.

In recent years, there has been a significant increase in interest in the use of curdlan, a naturally derived polymer, for medical applications. However, it is relatively inactive, and additives increasing its biomedical potential are required; for example, antibacterial compounds, magnetic particles, or hemostatic agents. The stability of such complex constructs may be increased by additional functional networks, for instance, polycatecholamines. The article presents the production and characterization of functional hydrogels based on curdlan enriched with Fe3O4 nanoparticles (NPs) or Fe3O4-based heterostructures and poly(L-DOPA) (PLD). Some of the prepared modified hydrogels were nontoxic, relatively hemocompatible, and showed high antibacterial potential and the ability to convert energy with heat generation. Therefore, the proposed hydrogels may have potential applications in temperature-controlled regenerative processes as well as in oncology therapies as a matrix of increased functionality for multiple medical purposes. The presence of PLD in the curdlan hydrogel network reduced the release of the NPs but slightly increased the hydrogel's hemolytic properties. This should be taken into account during the selection of the final hydrogel application.

Zn-doped Mono- and Biphasic Calcium Phosphate Materials Derived from Agriculture Waste and Their Potential Biomedical Applications: Part I.

In this study, calcium phosphate materials were obtained via a simple, eco-friendly wet synthesis method using hen eggshells as a calcium source. It was shown that Zn ions were successfully incorporated into hydroxyapatite (HA). The obtained ceramic composition depends on the zinc content. When doped with 10 mol % of Zn, in addition to HA and Zn-doped HA, DCPD (dicalcium phosphate dihydrate) appeared and its content increased with the increase in Zn concentration. All doped HA materials exhibited antimicrobial activity against S. aureus and E. coli. Nevertheless, fabricated samples significantly decreased preosteoblast (MC3T3-E1 Subclone 4) viability in vitro, exerting a cytotoxic effect which probably resulted from their high ionic reactivity.

Chitosan as a Promising Support of a CDH Activity Preservation System for Biomedical and Industrial Applications.

Cellobiose dehydrogenase (CDH) is an extracellular hemoflavoprotein catalyzing the oxidation reaction of ß-1,4-glycosidic-bonded sugars (lactose or cellobiose), which results in the formation of aldobionic acids and hydrogen peroxide as a byproduct. The biotechnological application of CDH requires the immobilization of the enzyme on a suitable support. As a carrier of natural origin used for CDH immobilization, chitosan seems to increase the catalytic potential of the enzyme, especially for applications as packaging in the food industry and as a dressing material in medical applications. The present study aimed to immobilize the enzyme on chitosan beads and determine the physicochemical and biological properties of immobilized CDHs obtained from different fungal sources. The chitosan beads with immobilized CDHs were characterized in terms of their FTIR spectra or SEM microstructure. The most effective method of immobilization in the proposed modification was the covalent bonding of enzyme molecules using glutaraldehyde, resulting in efficiencies ranging from 28 to 99%. Very promising results, compared to free CDH, were obtained in the case of antioxidant, antimicrobial, and cytotoxic properties. Summarizing the obtained data, chitosan seems to be a valuable material for the development of innovative and effective immobilization systems for biomedical applications or food packaging, preserving the unique properties of CDH.

Alternating magnetic field and NIR energy conversion on magneto-plasmonic Fe3O4@APTES-Ag heterostructures with SERS detection capability and antimicrobial activity.

Multipurpose Fe3O4@APTES-Ag heterostructures for mutual heat generation, SERS probing, and antimicrobial activity were fabricated using a three-step process. Silver metallic particles were precipitated on a thin silica shell that served as an interlayer with Fe3O4 nanocubes. The structural properties were studied by means of the powder X-ray diffraction technique, and selected area electron diffraction. Particle size, distribution, and morphology were evaluated using transmission electron microscopy, while element mapping was performed using the STEM-EDS technique. The presence of the silica shell and the effectiveness of the Ag reduction were checked by FTIR-ATR spectroscopy. The heat generation ability was studied by using AMF and NIR contactless external stimulations working separately and simultaneously. We demonstrated that the dual mode stimulation leads to a SAR (specific absorption rate) of 1000 W g-1 with the predominant role of the mechanism associated with the light interaction. The SERS effect was recorded with the use of the R6G standard molecule showing high capability of the heterostructures for Raman signal augmentation. Fe3O4 nanocubes decorated with Ag particles have shown antibacterial activity against P. aeruginosa. The Fe3O4@APTES-Ag presents promising potential as a multipurpose platform for biological applications ranging from photomagnetic therapies, to analytical probes exploiting the SERS effect and antibacterial activity.

Medical Use of Polycatecholamines + Oxidoreductases-Modified Curdlan Hydrogels-Perspectives.

Curdlan (ß-1,3-glucan), as a biodegradable polymer, is still an underestimated but potentially attractive matrix for the production of dressing materials. However, due to its lack of susceptibility to functionalization, its use is limited. The proposed curdlan modification, using a functional polycatecholamine layer, enables the immobilization of selected oxidoreductases (laccase and peroxidase) on curdlan hydrogel. The following significant changes of biological and mechanical properties of polycatecholamines + oxidoreductases-modified matrices were observed: reduced response of human monocytes in contact with the hydrogels, modulated reaction of human blood, in terms of hemolysis and clot formation, and changed mechanical properties. The lack of toxicity towards human fibroblasts and the suppression of cytokines released by human monocytes in comparison to pristine curdlan hydrogel, seems to make the application of such modifications attractive for biomedical purposes. The obtained results could also be useful for construction of a wide range of biomaterials based on other polymer hydrogels.

Collagen-Sealed Polyester Vascular Prostheses Functionalized by Polycatecholamine Coatings.

Collagen-sealed polyester (PET) prostheses are commonly used in reconstructive vascular surgery due to their self-sealing properties. To prevent post-surgical infection, different modification methods have been tested but so far none have showed long-term satisfactory efficiency. For this reason, in the present study, a commercial collagen-sealed PET prosthesis was coated by a highly adhesive poly (L-DOPA) layer maintaining the sealing protein without losing the original properties and functionality. This modified (as proven by SEM, FTIR, XPS and contact angle) graft exhibited comparable wettability and elasticity as pristine commercial graft, as well as reduced hemolysis-inducing effect, lowered toxicity against human endothelial cells and reduced toxicity in Danio rerio model. Poly (L-DOPA)-coated grafts were shown to bind six times more aminoglycoside antibiotic (gentamicin) than pristine graft. Poly (L-DOPA)-coated antibiotic-bound prostheses exhibited an improved antibacterial activity (bacterial growth inhibition and anti-adhesive capacity) in comparison with pristine antibiotic-bound graft. Overall, poly (L-DOPA)-coatings deposited on PET vascular grafts can effectively functionalize collagen-sealed prostheses without the loss of protein sealing layer and allow for antibiotics incorporation to provide higher safety in biomedical applications.

Biocompatible curdlan-based biomaterials loaded with gentamicin and Zn-doped nano-hydroxyapatite as promising dressing materials for the treatment of infected wounds and prevention of surgical site infections.

A topical application of antibiotic-loaded wound dressings is recommended only for chronically infected wounds with poor vascularization. Thus, more often dressing materials loaded with antibacterial metal ions are produced. In turn, gentamicin sponges are commonly used to prevent surgical site infections. The aim of this study was to produce curdlan-based biomaterials enriched with gentamicin and zinc (Zn)-doped nano-hydroxyapatite to prevent wound and surgical site infections. Developed biomaterials were subjected to basic microstructural characterization, cytotoxicity test against human skin fibroblasts (BJ cell line), and comprehensive microbiological experiments using Staphylococcus aureus and Pseudomonas aeruginosa strains. To evaluate the in vivo healing capacity of the developed biomaterials, severely infected chronic wound in a veterinary patient was treated with the use of gentamicin-loaded dressing. Fabricated biomaterials were characterized by a highly porous microstructure with high plasma absorption capacity (approx. 7 mL/g for Zn-loaded biomaterial and 13 mL/g for gentamicin-enriched dressing) and optimal water vapor transmission rate (approx. 1700 g/m2/day). Due to the presence of bioceramics, material containing Zn showed slightly higher compressive strength (0.37 MPa) and Young's modulus (3.33 MPa) values compared to gentamicin-loaded biomaterial (0.12 MPa and 1.29 MPa, respectively). Gentamicin-enriched biomaterial showed burst release of the drug within the first 5 h, while, the zinc-loaded biomaterial exhibited a constant gradual release of the zinc ions. Conducted assays showed that developed biomaterials were non-toxic against human skin fibroblasts (cell viability in the range of 71-95 %) and revealed strong bactericidal activity (99.9 % reduction in the number of viable bacterial CFUs in direct contact test) against S. aureus. In the case of P. aeruginosa, only gentamicin-loaded biomaterial exhibited bactericidal effect. Additionally, biomaterials had the ability to uptake, lock in, and kill bacteria within their gel structure, enabling the cleansing of the wound bed at every dressing change. Finally, the treatment of severely infected wound in veterinary patient confirmed the effectiveness of gentamicin-loaded biomaterial. Biomaterial enriched with gentamicin possesses great potential to be used as a dressing material or sponge for the treatment of chronically infected wounds and surgical site infections. In turn, the zinc-loaded biomaterial may be used as a wound dressing to reduce and prevent microbial contamination.

Antibacterial and Cytotoxicity Evaluation of New Hydroxyapatite-Based Granules Containing Silver or Gallium Ions with Potential Use as Bone Substitutes.

The aim of the current work was to study the physicochemical properties and biological activity of different types of porous granules containing silver or gallium ions. Firstly, hydroxyapatites powders doped with Ga3+ or Ag+ were synthesized by the standard wet method. Then, the obtained powders were used to fabricate ceramic microgranules (AgM and GaM) and alginate/hydroxyapatite composite granules (AgT and GaT). The ceramic microgranules were also used to prepare a third type of granules (AgMT and GaMT) containing silver or gallium, respectively. All the granules turned out to be porous, except that the AgT and GaT granules were characterized by higher porosity and a better developed specific surface, whereas the microgranules had very fine, numerous micropores. The granules revealed a slow release of the substituted ions. All the granules except AgT were classified as non-cytotoxic according to the neutral red uptake (NRU) test and the MTT assay. The obtained powders and granules were subjected to various antibacterial test towards the following four different bacterial strains: Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa and Escherichia coli. The Ag-containing materials revealed high antibacterial activity.

Gypsum-related compensation of ions uptake by highly porous hydroxyapatite ceramics - Consequences for osteoblasts growth and proliferation.

Hydroxyapatites of high calcium and phosphate ions adsorption capacity are highly bioactive. However, they cause the removal of these ions from tissue liquids and cell culture media, thus reducing viability and proliferation potential of osteoblasts. Addition of small amount of gypsum (calcium sulfate dihydrate) to such hydroxyapatite-based composites may help to compensate the ions removal and stimulate the osteoblasts growth and proliferation. Therefore, the aim of this work was to enrich the highly porous hydroxyapatite-based composite with gypsum and verify its effect on ions adsorption as well as osteoblasts viability and proliferation. The results showed that addition of 1.5-1.75% gypsum caused short-term calcium ions compensation in media incubated with the composite and time-shifted increase of osteoblasts proliferation. Moreover, presence of gypsum in the composite increased the content of large pores in SBF-incubated biomaterials with no effect on their microstructure or mechanical parameters. Overall, gypsum addition improves the compatibility of hydroxyapatite-based materials with no critical disadvantages for other properties.

Polycatecholamine and gentamicin as modifiers for antibacterial and blood-biocompatible polyester vascular prostheses.

Polyester (PET) prostheses are commonly used in reconstructive vascular surgery. The most serious complication after implantation is early or late infection of the graft. Therefore, there is high demand to protect prosthesis against bacterial adhesion and biofilm development. For this reason, in this work PET prostheses were first coated by highly adhesive polycatecholamine layer. The grafts were then coupled with gentamicin and studied in relation to morphological and structural properties, biological safety (contact with blood, reaction of vascular endothelial cells (HUVEC), Danio rerio fish), drug release and antibacterial activity. Among two tested catecholamine monomers, L-DOPA was found to be more effective precursor in this process than dopamine. For L-DOPA, assistance of Cu2+, Mg2+ and Na+ ions seems to increase the amount of further immobilized drug. Coated prostheses exhibited greater human endothelial cell proliferation increase and lower cytotoxic effect than uncoated. The modification reduced the hemolysis observed for pristine commercial graft and limited the rate of abnormalities in D. rerio larvae, confirming the safety of the proposed modification. The coating allowed to double the amount of immobilized antibiotic in comparison with uncoated graft which resulted in increased antibacterial activity and reduced bacterial adhesion against 4 bacterial strains prevalent in biomaterials infections. Overall, poly(L-DOPA)-coatings deposited on PET vascular grafts can effectively functionalize these prostheses for higher safety in biomedical applications.

Highly Porous Fluorapatite/ß-1,3-Glucan Composite for Bone Tissue Regeneration: Characterization and In-Vitro Assessment of Biomedical Potential.

A novel fluorapatite/glucan composite ("FAP/glucan") was developed for the treatment of bone defects. Due to the presence of polysaccharide polymer (ß-1,3-glucan), the composite is highly flexible and thus very convenient for surgery. Its physicochemical and microstructural properties were evaluated using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), mercury intrusion, mechanical testing and compared with the reference material, which was a hydroxyapatite/glucan composite ("HAP/glucan") with hydroxyapatite granules (HAP) instead of FAP. It was found that FAP/glucan has a higher density and lower porosity than the reference material. The correlation between the Young's modulus and the compressive strength between the materials is different in a dry and wet state. Bioactivity assessment showed a lower ability to form apatite and lower uptake of apatite-forming ions from the simulated body fluid by FAP/glucan material in comparison to the reference material. Moreover, FAP/glucan was determined to be of optimal fluoride release capacity for osteoblasts growth requirements. The results of cell culture experiments showed that fluoride-containing biomaterial was non-toxic, enhanced the synthesis of osteocalcin and stimulated the adhesion of osteogenic cells.

Thromboelastometric Analysis of Anticancer Cerrena unicolor Subfractions Reveal Their Potential as Fibrin Glue Drug Carrier Enhancers.

In this study, the influence of two subfractions (with previously proven anti-cancer properties) isolated from wood rot fungus Cerrena unicolor on the formation of a fibrin clot was investigated in the context of potential use as fibrin glue and sealant enhancers and potential wound healing agents. With the use of ROTEM thromboelastometry, we demonstrated that, in the presence of fibrinogen and thrombin, the S6 fraction accelerated the formation of a fibrin clot, had a positive effect on its elasticity modulus, and enhanced the degree of fibrin cross-linking. The S5 fraction alone showed no influence on the fibrin coagulation process; however, in the presence of fibrin, it exhibited a decrease in anti-proliferative properties against the HT-29 line, while it increased the proliferation of cells in general at a concentration of 100 µg/mL. Both fractions retained their proapoptotic properties to a lesser degree. In combination with the S6 fraction in the ratio of 1:1 and 1:3, the fractions contributed to increased inhibition of the activity of matrix metalloproteinases (MMPs). This may suggest anti-metastatic activity of the combined fractions. In conclusion, the potential of the fractions isolated from the C. unicolor secretome to be used as a means of improving the wound healing process was presented. The potential for delivering agents with cytostatic properties introduced far from the site of action or exerting a pro-proliferative effect at the wound site with the aid of a fibrin sealant was demonstrated.

Poly(levodopa)-modified ß-glucan as a candidate for wound dressings.

Levodopa (biological precursor of dopamine) is sometimes used instead of dopamine for synthesis of highly adhesive polycatecholamine coatings on different materials. However, in comparison of polydopamine, little is known about biological safety of poly(levodopa) coatings and their efficacy in binding of therapeutically active substances. Therefore, thermally polymerized curdlan hydrogel was modified via two different modes using levodopa instead of commonly used dopamine and then coupled with gentamicin - aminoglycoside antibiotic. Physicochemical properties, biological safety and antibacterial potential of the hydrogels were evaluated. Poly(levodopa) deposited on curdlan exhibited high stability in wide pH range and blood or plasma, were nontoxic in zebrafish model and favored blood clot formation. Simultaneously, one of hydrogel modification modes allowed to observe high gentamicin binding capacity, antibacterial activity, relatively high nontoxicity for fibroblasts and was unfavorable for fibroblasts adhesion. Such modified poly(levodopa)-modified curdlan showed therefore high potential as wound dressing biomaterial.

Effect of Gold Nanoparticles and Silicon on the Bioactivity and Antibacterial Properties of Hydroxyapatite/Chitosan/Tricalcium Phosphate-Based Biomicroconcretes.

Bioactive, chemically bonded bone substitutes with antibacterial properties are highly recommended for medical applications. In this study, biomicroconcretes, composed of silicon modified (Si-αTCP) or non-modified α-tricalcium phosphate (αTCP), as well as hybrid hydroxyapatite/chitosan granules non-modified and modified with gold nanoparticles (AuNPs), were designed. The developed biomicroconcretes were supposed to combine the dual functions of antibacterial activity and bone defect repair. The chemical and phase composition, microstructure, setting times, mechanical strength, and in vitro bioactive potential of the composites were examined. Furthermore, on the basis of the American Association of Textile Chemists and Colorists test (AATCC 100), adapted for chemically bonded materials, the antibacterial activity of the biomicroconcretes against S. epidermidis, E. coli, and S. aureus was evaluated. All biomicroconcretes were surgically handy and revealed good adhesion between the hybrid granules and calcium phosphate-based matrix. Furthermore, they possessed acceptable setting times and mechanical properties. It has been stated that materials containing AuNPs set faster and possess a slightly higher compressive strength (3.4 ± 0.7 MPa). The modification of αTCP with silicon led to a favorable decrease of the final setting time to 10 min. Furthermore, it has been shown that materials modified with AuNPs and silicon possessed an enhanced bioactivity. The antibacterial properties of all of the developed biomicroconcretes against the tested bacterial strains due to the presence of both chitosan and Au were confirmed. The material modified simultaneously with AuNPs and silicon seems to be the most promising candidate for further biological studies.

The Chemical and Biological Properties of Nanohydroxyapatite Coatings with Antibacterial Nanometals, Obtained in the Electrophoretic Process on the Ti13Zr13Nb Alloy.

The risk of an early inflammation after implantation surgery of titanium implants has caused the development of different antimicrobial measures. The present research is aimed at characterizing the effects of nanosilver and nanocopper dispersed in the nanohydroxyapatite coatings, deposited on the Ti13Zr13Nb alloy, and on the chemical and biological properties of the coatings. The one-stage deposition process was performed by the electrophoretic method at different contents of nanomaterials in suspension. The surface topography of the coatings was examined with scanning electron microscopy. The wettability was expressed as the water contact angle. The corrosion behavior was characterized by the potentiodynamic technique. The release rate of copper and silver into the simulated body fluid was investigated by atomic absorption spectrometry. The antibacterial efficiency was evaluated as the survivability and adhesion of the bacteria and the growth of the biofilm. The cytotoxicity was assessed for osteoblasts. The results demonstrate that silver and copper increase the corrosion resistance and hydrophilicity. Both elements together effectively kill bacteria and inhibit biofilm growth but appear to be toxic for osteoblasts. The obtained results show that the nanohydroxyapatite coatings doped with nanosilver and nanocopper in a one-stage electrophoretic process can be valuable for antibacterial coatings.

Lasius fuliginosus Nest Carton as a Source of New Promising Bioactive Extracts with Chemopreventive Potential.

Six new water extracts (E1-E6) were obtained from nest carton produced by jet black ants Lasius fuliginosus and tested for their biochemical and bioactive properties, including antioxidative and anticancer effects. The present study demonstrated significant qualitative and quantitative differences in the content of individual biochemical constituents, as well as bioactive properties between the investigated samples. All tested extracts demonstrated antioxidant properties (determined using 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) methods), and the highest antioxidative potential was recorded in extracts E1 and E2 (188.96 and 313.67 µg/mL of ascorbic acid equivalent for ABTS and 176.42 and 202.66 µg/mL for DPPH reagent). Furthermore the six extracts exhibited strong inhibitory activity towards human melanoma cells of the A-375 CRL-1619 line in a dose-dependent manner. The most interesting chemopreventive activity was exhibited by extract E2, which inhibited the proliferation of A-375 cells to the greatest extent, while having a minimal effect on Vero cells. The effect on cancer cells has been confirmed using the Electric Cell-substrate Impedance Sensing (ECIS) technique. Significant impedance changes have been detected in A-375 and Vero cells following the administration of extract E2. The obtained results are really promising and constitute the basis for further research on the nest carton of jet black ant.

Polydopamine-coated curdlan hydrogel as a potential carrier of free amino group-containing molecules.

Curdlan hydrogel obtained after thermal gelling exhibits elasticity and high water-absorbing capacity. However, its modifications leading to the increase of biofunctionality usually alter its solubility and reduce mechanical parameters. Therefore, curdlan hydrogel was modified by deposition of polydopamine to improve its capacity to bind biologically active molecules with free amino groups. It exhibited the unchanged structure, mechanical properties and increased soaking capacity. Aminoglycoside antibiotic (gentamicin) as a model molecule was effectively immobilized to such modified curdlan via quinone moiety (but not amino groups) of polydopamine. Approximately 50 % of the immobilized drug was released following Fickian diffusion and inhibited the bacterial growth in matrix-surrounding medium in prolonged manner. The remaining drug amount was stably attached and prevented the hydrogel against bacterial adhesion even when all the mobile drug has been released. Therefore, polydopamine-modified curdlan hydrogel shows the potential for fabrication of functional materials for different purposes, including drug-loaded biomaterials.