RESUMO
Industrial production of bacterial cellulose (BC) remains challenging due to significant production costs, including the choice of appropriate growth media. This research focuses on optimization of cheese whey (CW) based media for enhanced production of BC. Two modifications were made for CW medium for BC production with Komagataeibacter rhaeticus MSCL 1463. BC production in a medium of enzymatically hydrolyzed CW (final concentration of monosaccharides: glucose 0.13 g L-1, galactose 1.24 g L-1) was significantly enhanced, achieving a yield of 4.95 ± 0.25 g L-1, which markedly surpasses the yields obtained with the standard Hestrin-Schramm (HS) medium containing 20 g L-1 glucose and acid-hydrolyzed CW (final concentration of monosaccharides: glucose 1.15 g L-1, galactose 2.01 g L-1), which yielded 3.29 ± 0.12 g L-1 and 1.01 ± 0.14 g L-1, respectively. We explored the synergistic effects of combining CW with various agricultural by-products (corn steep liquor (CSL), apple juice, and sugar beet molasses). Notably, the supplementation with 15% corn steep liquor significantly enhanced BC productivity, achieving 6.97 ± 0.17 g L-1. A comprehensive analysis of the BC's physical and mechanical properties indicated significant alterations in fiber diameter (62-167 nm), crystallinity index (71.1-85.9%), and specific strength (35-82 MPa × cm3 g-1), as well as changes in the density (1.1-1.4 g cm-3). Hydrolyzed CW medium supplemented by CSL could be used for effective production of BC.
Assuntos
Acetobacteraceae , Celulose , Queijo , Meios de Cultura , Soro do Leite , Celulose/metabolismo , Soro do Leite/metabolismo , Queijo/microbiologia , Meios de Cultura/química , Hidrólise , Acetobacteraceae/metabolismo , Acetobacteraceae/crescimento & desenvolvimento , Fermentação , Zea mays/metabolismo , Glucose/metabolismo , Sucos de Frutas e VegetaisRESUMO
Modern bioplastics and biocomposites frequently contain non-biodegradable or non-sustainable components and require complex recycling routes. Sustainable materials require integrating bio-based, cheap, widely available, recycled, or waste components. In order to incorporate these concepts, we selected hemp stalk waste, the industrial byproducts glycerol and xylan (hemicellulose), and citric acid as key components. Hemp stalks were processed into cast papers using only mechanical processes and no chemical modifications or pre-treatments. Cast papers were impregnated with a crosslinking mixture of glycerol, xylan, citric acid, and the plasticizer polyethylene glycol (PEG). Thermal crosslinking was performed as a single-step reaction by curing materials at 140 °C. All prepared bioplastics were washed in water for 48 h and extensively tested for water resistance and water absorption. A recycling route with depolymerization (for pulp recovery) in sodium hydroxide is demonstrated. A comprehensive analysis of crosslinking reaction is provided via FTIR and rheology, supplemented by structure analysis via SEM. A 7-fold reduction in water uptake was achieved compared to cast hemp paper. Obtained bioplastics, after washing in water, show elastic modulus up to 2.9 GPa, tensile strength up to 70 MPa, and elongation up to 4.3 %. As a result of component ratio variation, bioplastics achieve a high tuneability of properties ranging from brittle to ductile. Dielectric analysis indicates that bioplastics have the potential for application in electric insulation. A three-layer laminate is demonstrated as a concept for potential application as an adhesive for bio-based composites.
Assuntos
Cannabis , Celulose , Celulose/química , Xilanos , Glicerol/química , Biopolímeros , Água/químicaRESUMO
Biomaterials and biopolymers, such as bacterial cellulose (BC), are becoming increasingly important as sustainable materials with a wide range of potential applications. However, BC industrial production is associated with several difficulties such as low BC production yields and high production costs; therefore, cheap alternative growth media, e.g. apple juice are being studied intensively. The aim of this study is to evaluate BC synthesis under static conditions on apple juice medium (AJM). The optimal concentration of apple juice in unsupplemented AJM for Novacetimonas hansenii MSCL 1646 was shown by its dilution 1:6 with water, which resulted in 0.89 ± 0.01 g/L of dry BC weight after 10 cultivation days. Low BC synthesis can be associated with insufficient N concentration in apple juice; therefore, different organic and inorganic N sources were evaluated in combination with AJM, and beef extract (5 g/L) was found to be the most suitable. Further, AJM optimisation experiment showed the optimal apple juice and beef extract concentrations as 1:2 and 15 g/L respectively, which resulted in 17.27 ± 0.07 g/L of dry BC weight, which is significantly higher than in standard Hestrin-Schramm (HS) medium (4.07 ± 0.02 g/L). Analysis of mechanical and physical properties showed that use of AJM results in changes in BC properties compared with the standard HS medium. Results of the study indicate that apple juice is an effective and cheap C source that in combination with appropriate N source leads to high BC synthesis and makes it suitable for industrial BC production. KEY POINTS: ⢠Low quality apples can be used as raw material for BC production; ⢠Beef extract improves BC synthesis in apple juice medium; ⢠Use of apple juice and beef extract affect mechanical properties of BC.
Assuntos
Celulose , Malus , Meios de Cultura , Sucos de Frutas e Vegetais , Extratos VegetaisRESUMO
We combine renewable and waste materials to produce hydrophobic membranes in the present work. Cellulose nanopaper prepared from paper waste was used as a structural component for the membrane. The pine wax was reclaimed from pine needle extraction waste and can be regarded as a byproduct. The dip-coating and spray-coating methods were comprehensively compared. In addition, the solubility of wax in different solvents is reported, and the concentration impact on coating quality is presented as the change in the contact angle value. The sensile drop method was used for wetting measurements. Spray-coating yielded the highest contact angle with an average of 114°, while dip-coating reached an average value of 107°. Scanning electron microscopy (SEM) was used for an in-depth comparison of surface morphology. It was observed that coating methods yield significantly different microstructures on the surface of cellulose fibers. The wax is characterized by nuclear magnetic resonance (NMR) spectroscopy and differential scanning calorimetry (DSC). Pine wax has a melting temperature of around 80 °C and excellent thermal stability in oxygen, with a degradation peak above 290 °C. Fourier transform infrared spectroscopy (FTIR) was used to identify characteristic groups of components and show the changes on coated nanopaper. Overall, the results of this work yield important insight into wax-coated cellulose nanopapers and a comparison of spray- and dip-coating methods. The prepared materials have a potential application as membranes and packaging materials.
RESUMO
Cellulose materials and products are frequently affected by environmental factors such as light, temperature, and humidity. Simulated UV irradiation, heat, and moisture exposure were comprehensively used to characterize changes in cellulose nanopaper (NP) tensile properties. For the preparation of NP, high-purity cellulose from old, unused filter paper waste was used. Lignin and xylan were used as sustainable green interface engineering modifiers for NP due to their structural compatibility, low price, nontoxic nature, and abundance as a by-product of biomass processing, as well as their ability to protect cellulose fibers from UV irradiation. Nanofibrillated cellulose (NFC) suspension was obtained by microfluidizing cellulose suspension, and NP was produced by casting films from water suspensions. The use of filler from 1 to 30 wt% significantly altered NP properties. All nanopapers were tested for their sensitivity to water humidity, which reduced mechanical properties from 10 to 40% depending on the saturation level. Xylan addition showed a significant increase in the specific elastic modulus and specific strength by 1.4- and 2.8-fold, respectively. Xylan-containing NPs had remarkable resistance to UV irradiation, retaining 50 to 90% of their initial properties. Lignin-modified NPs resulted in a decreased mechanical performance due to the particle structure of the filler and the agglomeration process, but it was compensated by good property retention and enhanced elongation. The UV oxidation process of the NP interface was studied with UV-Vis and FTIR spectroscopy, which showed that the degradation of lignin and xylan preserves a cellulose fiber structure. Scanning electron microscopy images revealed the structural formation of the interface and supplemented understanding of UV aging impact on the surface and penetration depth in the cross-section. The ability to overcome premature aging in environmental factors can significantly benefit the wide adaption of NP in food packaging and functional applications.
Assuntos
Celulose/química , Lignina/química , Nanoestruturas/química , Xilanos/química , Teste de Materiais , Nanoestruturas/efeitos da radiaçãoRESUMO
According to the International Energy Agency, biorefinery is "the sustainable processing of biomass into a spectrum of marketable bio-based products (chemicals, materials) and bioenergy (fuels, power, heat)". In this review, we survey how the biorefinery approach can be applied to highly porous and nanostructured materials, namely aerogels. Historically, aerogels were first developed using inorganic matter. Subsequently, synthetic polymers were also employed. At the beginning of the 21st century, new aerogels were created based on biomass. Which sources of biomass can be used to make aerogels and how? This review answers these questions, paying special attention to bio-aerogels' environmental and biomedical applications. The article is a result of fruitful exchanges in the frame of the European project COST Action "CA 18125 AERoGELS: Advanced Engineering and Research of aeroGels for Environment and Life Sciences".