Thiol-functionalized cellulose for mercury polluted water remediation: Synthesis and study of the adsorption properties.

Mercury pollution poses a global health threat due to its high toxicity, especially in seafood where it accumulates through various pathways. Developing effective and affordable technologies for mercury removal from water is crucial. Adsorption stands out as a promising method, but creating low-cost materials with high selectivity and capacity for mercury adsorption is challenging. Here we show a sustainable method to synthesize low-cost sulfhydrylated cellulose with ethylene sulfide functionalities bonded glucose units. Thiol-functionalized cellulose exhibits exceptional adsorption capacity (1325 mg g-1) and selectivity for Hg(II) over other heavy metals (Co, Cu, Zn, Pb) and common cations (Ca++, Mg++) found in natural waters. It performs efficiently across a wide pH range and different aqueous matrices, including wastewater, and can be regenerated and reused multiple times without significant loss of performance. This approach offers a promising solution for addressing mercury contamination in water sources.

MWCNTs Decorated with TiO2 as Highly Performing Filler in the Preparation of Nanocomposite Membranes for Scalable Photocatalytic Degradation of Bisphenol A in Water.

Bisphenol A (BPA), an endocrine-disrupting compound with estrogenic behavior, is of great concern within the scientific community due to its high production levels and increasing concentration in various surface aquifers. While several materials exhibit excellent capacity for the photocatalytic degradation of BPA, their powdered nature and poor chemical stability render them unsuitable for practical application in large-scale water decontamination. In this study, a new class of nanocomposite membranes based on sulfonated polyethersulfone (sPES) and multiwalled carbon nanotubes decorated with TiO2 nanoparticles (MWCNTs-TiO2) were investigated as efficient and scalable photocatalysts for the photodegradation of BPA in aqueous solutions. The MWCNTs-TiO2 hybrid material was prepared through a facile and inexpensive hydrothermal method and extensively characterized by XRD, Raman, FTIR, BET, and TGA. Meanwhile, nanocomposite membranes at different filler loadings were prepared by a simple casting procedure. Swelling tests and PFG NMR analyses provided insights into the impact of filler introduction on membrane hydrophilicity and water molecular dynamics, whereas the effectiveness of the various photocatalysts in BPA removal was monitored using HPLC. Among the different MWCNTs-TiO2 content nanocomposites, the one at 10 wt% loading (sP-MT10) showed the best photoactivity. Under UV irradiation at 254 nm and 365 nm for 240 min, photocatalytic oxidation of 5 mg/L bisphenol A by sP-MT10 resulted in 91% and 82% degradation, respectively. Both the effect of BPA concentration and the membrane regenerability were evaluated, revealing that the sP-MT10 maintained its maximum BPA removal capability over more than 10 cycles. Our findings indicate that sP-MT nanocomposite membranes are versatile, scalable, efficient, and highly reusable photocatalysts for the degradation of BPA, as well as potentially for other endocrine disruptors.

The Rainbow Arching over the Fluorescent Thienoviologen Mesophases.

Thermofluorochromic materials exhibit tunable fluorescence emission on heating or cooling. They are highly desirable for applications ranging from temperature sensing to high-security anti-counterfeiting. Luminescent matrices based on liquid crystals are very promising, particularly those based on liquid crystals with intrinsic fluorescence. However, only a few examples have been reported, suggesting ample margins for development in the field, due to the wide range of fluorophores and supramolecular organizations to be explored. Moreover, thermofluorochromic liquid crystals can be tailored with further functionalities to afford multi-stimuli responsive materials. For the first time, herein we report the thermofluorochromism of thienoviologen liquid crystals, already known to show bulk electrochromism and electrofluorochromism. In particular, we studied their photophysics in the 25 °C-220 °C range and as a function of the length of the N-linear alkyl chains, m (9 ≤ m ≤ 12 C atoms), and the type of anion, X (X = OTs-, OTf-, BF4-, NTf2-). Interestingly, by changing the parameters m, X and T, their fluorescence can be finely tuned in the whole visible spectral range up to the NIR, by switching among different mesophases. Importantly, by fixing the structural parameters m and X, an interesting thermofluorochromism can be achieved for each thienoviologen in a homologous series, leading to a switch of the emitted light from red to green and from white to blue as a consequence of the temperature-induced variation in the supramolecular interactions in the self-assembled phases.

Preparation, characterization, and bioactivity of Zingiber officinale Roscoe powder-based Pickering emulsions.

BACKGROUND: Biocompatible Pickering emulsions (PE) stabilized by tailor-made antioxidant-loaded particles have been known for some time now, but antioxidant-rich natural plant particle-based emulsions are much less well known. This study aimed to investigate the physico-chemical properties of commercial Zingiber officinale powders obtained from biological and conventional agricultural practice and ginger powder-based PE. RESULTS: The physico-chemical and biological properties of Zingiber officinale powders (GDPs) obtained from conventional (GDPC1 and GDPC2) and biological agricultural (GDPBIO) practices, and the properties of derived PE (PE_GDPs) were examined. All GDPs showed weak aggregation in aqueous media and a sufficiently hydrophobic surface to stabilize oil-in-water (O/W) PE against coalescence for at least 1 month. Zingiber officinale powders (2% w/w) derived from biological agricultural practices (GDPBIO) demonstrated the best emulsifying properties. The Zingiber officinale powders and PE_GDPs were also characterized by their phytochemical profiles. All the investigated samples exhibited ferric reducing ability power greater than the positive control, butylated hydroxytoluene (BHT), with values ranging from 91.21 to 102.63 µmol L-1 Fe (II) g-1 for GDPC2 and 05PE_GDPC1 (O/W=1:1), respectively. In ß-carotene bleaching test the following trend GDPC1 > GDPBIO > GDPC2 was observed. A 05PE_GDPBIO sample with the oil volume fraction equal to 50% was stable to oxidation and exhibited a promising α-amylase inhibitory activity. CONCLUSION: The results suggest that ginger powder should be used as a starting point to design biocompatible PEs for different applications in the functional food, nutraceutical, and pharmaceutical industries. In fact, powder and based PE are characterized by a promising antioxidant activity, carbohydrate hydrolyzing enzyme and lipase inhibitory properties. Further in vivo studies are necessary to confirm these findings. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Synthesis and Investigation of Electro-Optical Properties of H-Shape Dibenzofulvene Derivatives.

We have synthetized two classes of dibenzofulvene-arylamino derivatives with an H-shape design, for a total of six different molecules. The molecular structures consist of two D-A-D units connected by a thiophene or bitiophene bridge, using diarylamino substituents as donor groups anchored to the 2,7- (Group A) and 3,6- (Group B) positions of the dibenzofulvene backbone. The donor units and the thiophene or bithiophene bridges were used as chemico-structural tools to modulate electro-optical and morphological-electrical properties. A combination of experiments, such as absorption measurements (UV-Vis spectroscopy), cyclic voltammetry, ellipsometry, Raman, atomic force microscopy, TD-DFT calculation and hole-mobility measurements, were carried out on the synthesized small organic molecules to investigate the differences between the two classes and therefore understand the relevance of the molecular design of the various properties. We found that the anchoring position on dibenzofulvene plays a crucial key for fine-tuning the optical, structural, and morphological properties of molecules. In particular, molecules with substituents in 2,7 positions (Group A) showed a lower structural disorder, a larger molecular planarity, and a lower roughness.

Modeling the Solubility of Phenolic Acids in Aqueous Media at 37 °C.

In this work, the solubility of vanillic, gallic, syringic, p-coumaric, ferulic and caffeic acids was determined at 37 °C under different conditions, namely pure water and two different ionic media, NaCl(aq) and NaClO4(aq), at different ionic strengths (i.e., 0.16, 0.50, 1.0, 2.0 and 3.0 M). The solubility in water of all the acids was found to be higher than that in both of the ionic media. Moreover, the solubility of hydroxycinnamic acids was lower than that of hydroxybenzoic acids. The activity coefficients of neutral species were calculated from these data; this knowledge is necessary when modeling the dependence of equilibrium constants on the ionic strength. Results obtained in this work can be useful for further studies regarding complex formation equilibria between these ligands and bioavailable metal cations.

Panchromatic Fluorescence Emission from Thienosquaraines Dyes: White Light Electrofluorochromic Devices.

Electrofluorochromic devices (EFCDs) that allow the modulation of the light emitted by electroactive fluorophores are very attractive in the research field of optoelectronics. Here, the electrofluorochromic behaviour of a series of squaraine dyes was studied for the first time. In solutions, all compounds are photoluminescent with maxima located in the range 665-690 nm, characterized by quantum yields ranging from 30% to 4.1%. Squaraines were incorporated in a polymer gel used as an active layer in all-in-one gel switchable EFCDs. An aggregation induced quenching occurs in the gel phase, causing a significant decrease in the emission quantum yield in the device. However, the squaraines containing the thieno groups (thienosquaraines, TSQs) show a panchromatic emission and their electrofluorochromism allows the tuning of the fluorescence intensity from 500 nm to the near infrared. Indeed, the application of a potential difference to the device induces a reversible quenching of their emission that is significantly higher and occurs at shorter switching times for TSQs-based devices compared to the reference squaraine dye (DIBSQ). Interestingly, the TSQs fluorescence spectral profile becomes more structured under voltage, and this could be explained by the shift of the aggregates/monomer equilibrium toward the monomeric species, due to electrochemical oxidation, which causes the disassembling of aggregates. This effect may be used to modulate the colour of the fluorescence light emitted by a device and paves the way for conceiving new electrofluorochromic materials based on this mechanism.

A Review on Coordination Properties of Al(III) and Fe(III) toward Natural Antioxidant Molecules: Experimental and Theoretical Insights.

This review focuses on the ability of some natural antioxidant molecules (i.e., hydroxycinnamic acids, coumarin-3-carboxylic acid, quercetin, luteolin and curcumin) to form Al(III)- and Fe(III)-complexes with the aim of evaluating the coordination properties from a combined experimental and theoretical point of view. Despite the contributions of previous studies on the chemical properties and biological activity of these metal complexes involving such natural antioxidants, further detailed relationships between the structure and properties are still required. In this context, the investigation on the coordination properties of Al(III) and Fe(III) toward these natural antioxidant molecules might deserve high interest to design water soluble molecule-based metal carriers that can improve the metal's intake and/or its removal in living organisms.

Chemical-physical and dynamical-mechanical characterization on Spartium junceum L. cellulosic fiber treated with softener agents: a preliminary investigation.

Long cellulose fiber (10-30 cm), extracted from Spartium junceum, was chemically treated with different softening agents with the aim to improve its textile applicability. A preliminary sensory evaluation of the treated fibers revealed an evident, though qualitative, improvement of the fiber softness. The effects of the softening agents on the fiber was evaluated quantitatively, by means of macroscopic measurements of the wettability, viscoelasticity, and thermal (thermal gravimetry) properties. Moreover, the effects of the softening treatments on the microscopic structure of the fiber and on its properties at a molecular level, were studied by optical and scanning electron microscope and X-ray diffraction (XRD), respectively. The macroscopic analysis showed that the softeners used increases the hydrophilicity and water wettability of the cellulose fiber with respect to the raw one. Moreover, the dynamical mechanical analysis on sample yarns showed that the softeners increase the interfiber frictional forces. A linear correlation between the interfiber friction and the increase of hydrophilicity and fiber wettability was shown. The treated fiber exhibits a more homogeneous thermal behaviour, due to more homogeneous structural features, since the thermal-induced cellulose fibrils depolimerization undergoes a marked temperature range contraction. These data can be well related with those obtained by microscopy analysis, showing that the fiber surface, after the treatment, appears thinner and less rough, as well as with the XRD analysis, which shows that softeners induce a significant decrease of the fiber crystallinity.

Urinary Metabolic Profile of Patients with Transfusion-Dependent ß-Thalassemia Major Undergoing Deferasirox Therapy.

INTRODUCTION: Renal dysfunction is a frequent complication in patients suffering from ß-thalassemia major (ß-TM). The aim of this study was to analyze the renal function and urine metabolomic profile of ß-TM patients undergoing transfusions and deferasirox (DFX) therapy, in order to better characterize and shed light on the pathogenesis of renal disease in this setting. METHODS AND SUBJECTS: 40 patients affected by ß-TM treated with DFX and 35 age- and gender-matched healthy controls were enrolled in the study. Renal function was assessed. Glomerular filtration rate (GFR) was estimated with CKD-EPI and Schwartz formula for adults and children, respectively. Renal tubular function and maximal urine concentration ability were tested. Urine specimens were analyzed by nuclear magnetic resonance spectroscopy to identify the urinary metabolite profiles. RESULTS: The study of renal function in ß-TM patients revealed normal estimated (e)GFR mean values and the albumin-to-creatinine ratio was <30 mg/g. The analysis of tubular function showed normal basal plasma electrolyte levels; 60% of patients presented hypercalciuria and many subjects showed defective urine concentration. Several amino acids, N-methyl compounds, and organic acids were overexcreted in the urine of thalassemic patients compared with controls. DISCUSSION: The major finding of this work is that ß-TM patients and controls exhibit different concentrations of some metabolites in the urine. Early recognition of urinary abnormalities may be useful to detect and prevent kidney damage.

Porous Carbon Materials Obtained by the Hydrothermal Carbonization of Orange Juice.

Porous carbon materials are currently subjected to strong research efforts mainly due to their excellent performances in energy storage devices. A sustainable process to obtain them is hydrothermal carbonization (HTC), in which the decomposition of biomass precursors generates solid products called hydrochars, together with liquid and gaseous products. Hydrochars have a high C content and are rich with oxygen-containing functional groups, which is important for subsequent activation. Orange pomace and orange peels are considered wastes and then have been investigated as possible feedstocks for hydrochars production. On the contrary, orange juice was treated by HTC only to obtain carbon quantum dots. In the present study, pure orange juice was hydrothermally carbonized and the resulting hydrochar was filtered and washed, and graphitized/activated by KOH in nitrogen atmosphere at 800 °C. The resulting material was studied by transmission and scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and nitrogen sorption isotherms. We found porous microspheres with some degree of graphitization and high nitrogen content, a specific surface of 1725 m2/g, and a pore size distribution that make them good candidates for supercapacitor electrodes.

Totally green cellulose conversion into bio-oil and cellulose citrate using molten citric acid in an open system: synthesis, characterization and computational investigation of reaction mechanisms.

The simultaneous transformation of crystalline or amorphous cellulose into a furan-based bio-oil and cellulose citrate was realized avoiding the use of strong inorganic acids, drastic conditions, enzymatic treatments or microorganism fermentation. This innovative method is very eco-friendly and involves the use of molten citric acid under solvent free conditions at atmospheric pressure. An accurate discussion on chemical composition of the bio-oil enriched in bioprivileged molecules as well as structural and morphological characterization of cellulose citrate was reported. Moreover, mechanistic hypotheses were formulated on the basis of experimental findings and detailed DFT quantum-mechanical simulations were carried out to confirm, step by step, the proposed reaction paths.

Photocatalytic inactivation of Escherichia coli bacteria in water using low pressure plasma deposited TiO2 cellulose fabric.

Fabrics obtained from cellulose spinning, extracted from Spanish broom, were coated with TiO2 film, through the low pressure plasma sputtering technique, in order to get antibacterial activity. The obtained fabrics were used for the photocatalytic degradation of Escherichia coli, by irradiation with UV-light emitting diodes (UV-LED), in a batch photocatalytic reactor. Before and after functionalization treatments, cellulosic substrates were chemically characterized by X-ray photoelectron spectroscopy (XPS) analyses. Water Contact Angle (WCA) measurements allowed obtaining information about the hydrophilicity of the materials, while their antibacterial efficiency was determined at several initial concentrations (from 103 up to 108 CFU mL-1) of bacteria in distilled water, bottled water and synthetic wastewater. It was found that photocatalytic reactions were capable of achieving up to 100% bacterial inactivation in 1 h of treatment, following a pseudo-first order kinetic model. No bacterial regrowth was observed after photocatalytic treatments in almost all experimental conditions. In contrast, during photolytic treatment (i.e. in the absence of the TiO2 coated fabrics) bacteria recovered their initial concentration after 3 h in the dark. Finally, the reusability of the plasma modified fibers to inactivate bacteria was studied.

High-Performance Electrofluorochromic Switching Devices Using a Novel Arylamine-Fluorene Redox-Active Fluorophore.

Fluorescent light modulation by small electric potentials has gained huge interest in the past few years. This phenomenon, called electrofluorochromism, is of the utmost importance for applications in optoelectronic devices. Huge efforts are being addressed to developing electrofluorochromic systems with improved performances. One of the most critical issue is their low cyclability, which hampers their widespread use. It mostly depends on the intrinsic reversibility of the electroactive/fluorophore molecular system and on device architecture. Here we show a novel fluorene-based mixed-valence electrofluorochromic system that allows direct electrofluorochromic switching and exhibits incomparable electrochemical reversibility and device cyclability of more than 10 000 cycles.

Removal of Endocrine Disrupting Chemicals from Water: Adsorption of Bisphenol-A by Biobased Hydrophobic Functionalized Cellulose.

The aim of this study is to examine the efficiency of biobased Spanish broom (SB) surface modified cellulose fibers to remove bisphenol A (BPA), a well-known endocrine disruptor, from water. Spanish brooms are flowering plants, which are native and abundant to Mediterranean regions. The functionalized fibers (FF) were found to have the best adsorption efficiency at pH 5, due to the optimal hydrophobic interaction between the FF fiber and BPA. Adsorption kinetics of BPA was found to fit well a pseudo-second order reaction. Equilibrium isotherm data were fitted by Langmuir and Freundlich models. A very fast and simple regeneration method was developed and it was observed that adsorption capacity of the fibers was kept almost unchanged after 3 consecutive uses. Bottled water and synthetic wastewater were also tested to assess the efficiency of the process under more realistic water and wastewater treatment conditions. It was found that BPA removal was slightly decreased from 77% in ultrapure water to 64% in synthetic wastewater matrix, indicating that FF has a high selectivity toward BPA, even in the presence of other organic compounds. Overall, it was observed that SB-modified fibers can be a new promising green biotechnology for water purification.

Adsorption Performance Analysis of Alternative Reactive Media for Remediation of Aquifers Affected by Heavy Metal Contamination.

A series of experimental batch tests has been carried out with the aim of improving the knowledge of fundamental processes related to the fate and behavior of heavy metals that can be of environmental concern in groundwater. The analysis of contaminants (i.e., Cu, Zn, Cd and Pb) dynamics in different environmental compartments is specifically addressed by comparing the removal efficiencies of different types of reactive materials, three natural (i.e., vegetal fibers, natural limestone and natural zeolite) and one synthetic (i.e., synthetic zeolite). Results stemming from these reactive media has been compared with the outcomes related to the same test performed using zero valent iron which is the reactant usually employed for heavy metals remediation. All tested reactants exhibited important removal percentages, even larger than 90% in most cases, achieved in a contact time ranging between about 12 h and slightly longer than a day (i.e., 30 h). Maximum adsorption percentages are observed for pH ranging between 4 and 8 for all tested materials and contaminants. Our findings provided relevant evidence, to both researchers and technicians, on the competitiveness of the explored alternative mediums with respect to the classical reactants usually employed for heavy metals remediation.

Remediation of hydrocarbons polluted water by hydrophobic functionalized cellulose.

Remediation of water bodies from petroleum hydrocarbons is of the utmost importance due to health risks related to the high toxicity, mutagenicity and carcinogenicity of the hydrocarbons components that may enter into the food chain. Though several methods were proposed to face up this challenge, they are generally not easily feasible at a contaminated site and quite costly. Here we propose a green, cost-effective technology based on hydrophobized Spanish Broom (SB) cellulose fiber. The natural cellulose fiber was extracted by alkaline digestion of the raw vegetable. The hydrophilic cellulose surface was transformed into a hydrophobic one by the reaction with 4,4'-diphenylmethane diisocyanate (MDI) forming a very stable urethane linkage with the hydroxyl groups of cellulose emerging from the fibers surface. Chemical functionalization was performed with a novel solvent-free technology based on a home-made still reactor were the fiber was kept under vortex stirring and the MDI reactant then spread onto the fiber surface by nebulizing it in form of micrometer-sized droplets. The functionalized fiber, characterized by means of WCA measurements, XPS and ATR-FTIR spectroscopy, shows fast adsorption kinetics adsorption capacity as high as 220 mg/g, among the highest ever reported so far in the literature for cellulosic materials.

Complexation of Al3+ and Ni2+ by l-Ascorbic Acid: An Experimental and Theoretical Investigation.

Despite the potential versatility of Vitamin C as a ligand, only for few metal complexes does full characterization exist. Vitamin C metal complexes, indeed, are difficult to study experimentally because the ligand has multiple protonation and oxidation states, and the metal-ligand complexes are in general not as tight as one might expect and frequently resistant to crystallographic characterization. In most cases, coordination via one of the hypothesized modes is invoked, characterized by monodentate or bidentate coordination via the most acidic oxygen atoms, with the ligand singly or doubly deprotonated. In this study the ability of l-ascorbic acid to form complexes with Al3+ and Ni2+ ions under physiological conditions was investigated by using a combination of potentiometric measurements, 1H NMR spectroscopy, and DFT computations in order to recognize the structural properties of the resulting complexes in aqueous solution. The comparison between the values of the free energies of complexation obtained by using DFT quantum chemical calculations and estimated from experimental stability constants according to the mass action law and by considering the involved equilibria allows to select structure and preferred coordination modes of formed complexes. The protonation constant of the free ligand was also determined using potentiometric data and its reproduction by using computational approaches was critically commented.

Study of the adsorption of mercury (II) on lignocellulosic materials under static and dynamic conditions.

WHO has declared mercury as one of the most dangerous pollutants for human health. Unfortunately, several cases of rivers and aquifers contaminated by mercury inevitably poses the problem on how to remediate them. Considerable efforts are being addressed to develop cost-effective methodologies, among which the use of low-cost adsorbing materials. In this paper, the adsorption performances of an alternative lignocellulosic material derived from the Spanish broom plant, are presented. This plant is widely diffused in the world and its usage for Hg(II) removal from water in real working conditions requires only minimal pretreatment steps. A thoroughly investigation on the kinetics and thermodynamics of Hg(II) adsorption on Spanish broom is presented, by using Hg(II) polluted aqueous solutions specifically prepared in order to simulate typical groundwater conditions. Several batch experiments, under static conditions, were carried out in order to evaluate the effect of pH, contact time, adsorbent dosage, initial concentration, temperature. A maximum adsorption capacity of 20 mg L-1 can be obtained at pH 5, following a pseudo second order kinetics. Moreover, adsorption experiments in dynamic conditions were carried out using Spanish broom filters. Interestingly, a systematic, unconventional double S-shape breakthrough curve was observed under different experimental conditions, revealing the occurrence of two adsorption processes with different time scales. This behavior has been fitted by a bimodal Thomas model which, unlike the single Thomas fitting, gives satisfactory results with the introduction of a new parameter related to the fraction of surface active sites involved in the adsorption processes.

Electro-optical Properties of Neutral and Radical Ion Thienosquaraines.

Thienosquaraines are an interesting class of electroactive dyes that are useful for applications in organic electronics. Herein, the redox chemistry and electrochromic response of a few newly synthesized thienosquaraines are presented. These properties are compared to those of the commercial 2,4-bis[4-(N,N-diisobutylamino)-2,6-dihydroxyphenyl]squaraine. The stability of the radical ions formed in electrochemical processes strongly affects these properties, as shown by cyclic voltammetry, in situ spectroelectrochemistry, and quantum chemical calculations. Furthermore, all of the dyes show aggregation tendency resulting in panchromatic absorption covering the whole UV/Vis spectral range.