The Selenoproteome as a Dynamic Response Mechanism to Oxidative Stress in Hydrogenotrophic Methanogenic Communities.

Methanogenesis is a critical process in the carbon cycle that is applied industrially in anaerobic digestion and biogas production. While naturally occurring in diverse environments, methanogenesis requires anaerobic and reduced conditions, although varying degrees of oxygen tolerance have been described. Microaeration is suggested as the next step to increase methane production and improve hydrolysis in digestion processes; therefore, a deeper understanding of the methanogenic response to oxygen stress is needed. To explore the drivers of oxygen tolerance in methanogenesis, two parallel enrichments were performed under the addition of H2/CO2 in an environment without reducing agents and in a redox-buffered environment by adding redox mediator 9,10-anthraquinone-2,7-disulfonate disodium. The cellular response to oxidative conditions is mapped using proteomic analysis. The resulting community showed remarkable tolerance to high-redox environments and was unperturbed in its methane production. Next to the expression of pathways to mitigate reactive oxygen species, the higher redox potential environment showed an increased presence of selenocysteine and selenium-associated pathways. By including sulfur-to-selenium mass shifts in a proteomic database search, we provide the first evidence of the dynamic and large-scale incorporation of selenocysteine as a response to oxidative stress in hydrogenotrophic methanogenesis and the presence of a dynamic selenoproteome.

Relevance of extracellular electron uptake mechanisms for electromethanogenesis applications.

Electromethanogenesis has emerged as a biological branch of Power-to-X technologies that implements methanogenic microorganisms, as an alternative to chemical Power-to-X, to convert electrical power from renewable sources, and CO2 into methane. Unlike biomethanation processes where CO2 is converted via exogenously added hydrogen, electromethanogenesis occurs in a bioelectrochemical set-up that combines electrodes and microorganisms. Thereby, mixed, or pure methanogenic cultures catalyze the reduction of CO2 to methane via reducing equivalents supplied by a cathode. Recent advances in electromethanogenesis have been driven by interdisciplinary research at the intersection of microbiology, electrochemistry, and engineering. Integrating the knowledge acquired from these areas is essential to address the specific challenges presented by this relatively young biotechnology, which include electron transfer limitations, low energy and product efficiencies, and reactor design to enable upscaling. This review approaches electromethanogenesis from a multidisciplinary perspective, putting emphasis on the extracellular electron uptake mechanisms that methanogens use to obtain energy from cathodes, since understanding these mechanisms is key to optimize the electrochemical conditions for the development of these systems. This work summarizes the direct and indirect extracellular electron uptake mechanisms that have been elucidated to date in methanogens, along with the ones that remain unsolved. As the study of microbial corrosion, a similar bioelectrochemical process with Fe0 as electron source, has contributed to elucidate different mechanisms on how methanogens use solid electron donors, insights from both fields, biocorrosion and electromethanogenesis, are combined. Based on the repertoire of mechanisms and their potential to convert CO2 to methane, we conclude that for future applications, electromethanogenesis should focus on the indirect mechanism with H2 as intermediary. By summarizing and linking the general aspects and challenges of this process, we hope that this review serves as a guide for researchers working on electromethanogenesis in different areas of expertise to overcome the current limitations and continue with the optimization of this promising interdisciplinary technology.

Membrane fouling monitoring by 3ω sensing.

Membrane fouling significantly reduces membrane permeability, leading to higher operational expenses. In situ monitoring of membrane fouling can potentially be used to reduce operation cost by optimizing operational parameters and cleaning conditions. In this study, a platinum wire with a diameter of 20 µm was attached to the surface of a ceramic ultrafiltration membrane, and by measuring the voltage across the wire while applying an AC current, the amplitude of the third harmonic wave, the so-called 3ω signal, was obtained. Results showed increasing 3ω signals during formation of fouling layers, which correlates directly to the hydraulic resistance of the formed fouling layer in semi-dead end filtration of polymeric core shell particles and crossflow filtration of diluted milk. This is explained by the insulating effect of the fouling layers which reduces heat convection by crossflow and the different thermal conductivity in the fouling layer compared with the feed. After membrane cleaning, the permeability and the magnitude of the 3ω signal were partly restored, showing that the 3ω method can be used to monitor the effect of cleaning. The frequency of the AC current was varied so it was possible to measure the heat conductivity in the fouling layer (high frequency) and heat convection due to cross-flow (low frequency). This may potentially be used to get information of the type of fouling (heat conductivity) and thickness of the fouling layer (AC frequency where heat conductivity becomes dominating).

Strategies for synthesis of Prussian blue analogues.

We report a comparison of different common synthetic strategies for preparation of Prussian blue analogues (PBA). PBA are promising as cathode material for a number of different battery types, including K-ion and Na-ion batteries with both aqueous and non-aqueous electrolytes. PBA exhibit a significant degree of structural variation. The structure of the PBA determines the electrochemical performance, and it is, therefore, important to understand how synthesis parameters affect the structure of the obtained product. PBA are often synthesized by co-precipitation of a metal salt and a hexacyanoferrate complex, and parameters such as concentration and oxidation state of the precursors, flow rate, temperature and additional salts can all potentially affect the structure of the product. Here, we report 12 different syntheses and compare the structure of the obtained PBA materials.

Direct Measurements of Electroviscous Phenomena in Nafion Membranes.

Investigation of electroviscous effects is of interest to technologies that exploit transport of ions through ion exchange membranes, charged capillaries, and porous media. When ions move through such media due to a hydrostatic pressure difference, they interact with the fixed charges, leading to an increased hydraulic resistance. Experimentally this is observed as an apparent increase in the viscosity of the solution. Electroviscous effects are present in all electrochemical membrane-based processes ranging from nanofiltration to fuel-cells and redox flow batteries. Direct measurements of electroviscous effects varying the applied ionic current through Nafion membranes have, to the best of the authors' knowledge, not yet been reported in literature. In the current study, electroviscous phenomena in different Nafion ion exchange membranes are measured directly with a method where the volume permeation is measured under constant trans-membrane pressure difference while varying the ion current density in the membrane. The direct measurement of the electroviscous effect is compared to the one calculated from the phenomenological transport equations and measured transport coefficients. Within the experimental uncertainty, there is a good agreement between the two values for all membranes tested. We report here an electroviscous effect for all Nafion membranes tested to be κH?κH-1=1.15-0.052+0.035.

Tailored energy level alignment at MoOX/GaP interface for solar-driven redox flow battery application.

MoOX is commonly considered to be a high work-function semiconductor. From x-ray photoelectron spectroscopy and photo-electrochemical analysis, it is shown that MoOX can be considered as an effective hole transfer layer for the GaP-based device. Specifically, in the absence of carbon contamination using an ion beam cleaning step, the oxygen vacancy derived defect band located inside the bandgap becomes the main charge transfer mechanism. We demonstrate, for the first time, a device with a MoOX/GaP junction that functions as an unbiased photo-charging cell for the redox flow battery system with AQS/AQSH2∥I-/I3 - redox couples. This work has important implications toward enabling MoOX applications beyond the conventional solar cells, including electrochemical energy storage and chemical conversion systems.

Steady State and Dynamic Response of Voltage-Operated Membrane Gates.

An electrochemical flow cell with Nafion 212, aqueous LiI/I 2 redox solution, and carbon paper electrode was operated as an electro-osmotic gate based on the Electrokinetic Energy Conversion (EKEC) principle. The gate was operated in different modes. (i) In normal DC pump operation it is shown to follow the predictions from the phenomenological transport equations. (ii) Furthermore, it was also demonstrated to operate as a normally open, voltage-gated valve for microfluidic purposes. For both pump and valve operations low energy requirements (mW range) were estimated for precise control of small flows ( µ L range). (iii) Finally, the dynamic response of the pump was investigated by using alternating currents at a range of different frequencies.

Unbiased, complete solar charging of a neutral flow battery by a single Si photocathode.

Solar redox flow batteries have attracted attention as a possible integrated technology for simultaneous conversion and storage of solar energy. In this work, we review current efforts to design aqueous solar flow batteries in terms of battery electrolyte capacity, solar conversion efficiency and depth of solar charge. From a materials cost and design perspective, a simple, cost-efficient, aqueous solar redox flow battery will most likely incorporate only one semiconductor, and we demonstrate here a system where a single photocathode is accurately matched to the redox couples to allow for a complete solar charge. The single TiO2 protected Si photocathode with a catalytic Pt layer can fully solar charge a neutral TEMPO-sulfate/ferricyanide battery with a cell voltage of 0.35 V. An unbiased solar conversion efficiency of 1.6% is obtained and this system represents a new strategy in solar RFBs where a single silicon photocathode is paired with energetically suitable redox couples to build an integrated solar energy conversion and storage device with full realization of the energy storage capacity.

Data on flow cell optimization for membrane-based electrokinetic energy conversion.

This article elaborates on the design and optimization of a specialized flow cell for the measurement of direct conversion of pressure into electrical energy (Electrokinetic Energy Conversion, EKEC) which has been presented in Østedgaard-Munck et al. (2017) [1]. Two main flow cell parameters have been monitored and optimized: A) the hydraulic pressure profile on each side of the membrane introduced by pumps recirculating the electrolyte solution through the flow fields and B) the electrical resistance between the current collectors across the combined flow cell. The latter parameter has been measured using four-point Electrochemical Impedance spectroscopy (EIS) for different flow rates and concentrations. The total cell resistance consists of contributions from different components: the membrane [Formula: see text], anode charge transfer [Formula: see text], cathode charge transfer [Formula: see text], and ion diffusion in the porous electrodes [Formula: see text]. The intrinsic membrane properties of Nafion 117 has been investigated experimentally in LiI/I2 solutions with concentrations ranging between 0.06 and 0.96 M and used to identify the preferred LiI/I2 solution concentration. This was achieved by measuring the solution uptake, internal solution concentration and ion exchange capacity. The membrane properties were further used to calculate the transport coefficients and electrokinetic Figure of merit in terms of the Uniform potential and Space charge models. Special attention has been put on the streaming potential coefficient which is an intrinsic property.

Counter-ion transport number and membrane potential in working membrane systems.

In this work we use the general space-charge (SC) theory for a combined transport model of fluid and ion through cylindrical nanopores to derive equations for the membrane potential and counter-ion transport numbers. We discuss this approach for ion exchange membranes assuming aqueous domains as interconnected network of cylindrical pores. The transport number calculations from the SC theory are compared with the corresponding ones from the uniform potential (UP) and Teorell-Meyer-Sievers (TMS) models in the case of both zero and non-zero concentration gradient across the membrane and with an applied current density. By using this approach we suggest the optimal conditions for performing membrane potential experiments (i.e. choice of electrolyte and concentration difference) depending on an easily accessible membrane property, namely the volumetric charge density. We also theoretically describe a novel dynamic method to determine in a single experiment the membrane potential and membrane conductivity. To exemplify the use of the dynamic method we report the calculations based on typical operating conditions of the reverse electrodialysis process. The numerical results are presented in terms of the electrical potential difference versus the average pore radius and charge density. The resulting map is a useful tool for a rational design of an effective membrane morphology for a specific electrochemical application.

The 3-Omega Method for the Measurement of Fouling Thickness, the Liquid Flow Rate, and Surface Contact.

The 3-omega method is conventionally used for the measurement of thermal conductivity in solid samples. The present work includes the experimental characterization and proof-of-concept measurements of sensor concepts, based on the 3-omega method. It is shown that this method can be used to measure fouling layers with a thickness of 10 to 400 µm, to conduct the measurement of flow rates with a high precision, and finally, as a simple on-off contact sensor with a fast response time.

Organic Redox Species in Aqueous Flow Batteries: Redox Potentials, Chemical Stability and Solubility.

Organic molecules are currently investigated as redox species for aqueous low-cost redox flow batteries (RFBs). The envisioned features of using organic redox species are low cost and increased flexibility with respect to tailoring redox potential and solubility from molecular engineering of side groups on the organic redox-active species. In this paper 33, mainly quinone-based, compounds are studied experimentially in terms of pH dependent redox potential, solubility and stability, combined with single cell battery RFB tests on selected redox pairs. Data shows that both the solubility and redox potential are determined by the position of the side groups and only to a small extent by the number of side groups. Additionally, the chemical stability and possible degradation mechanisms leading to capacity loss over time are discussed. The main challenge for the development of all-organic RFBs is to identify a redox pair for the positive side with sufficiently high stability and redox potential that enables battery cell potentials above 1 V.

Direct Solar Charging of an Organic-Inorganic, Stable, and Aqueous Alkaline Redox Flow Battery with a Hematite Photoanode.

The intermittent nature of the sunlight and its increasing contribution to electricity generation is fostering the energy storage research. Direct solar charging of an auspicious type of redox flow battery could make solar energy directly and efficiently dispatchable. The first solar aqueous alkaline redox flow battery using low cost and environmentally safe materials is demonstrated. The electrolytes consist of the redox couples ferrocyanide and anthraquinone-2,7-disulphonate in sodium hydroxide solution, yielding a standard cell potential of 0.74 V. Photovoltage enhancement strategies are demonstrated for the ferrocyanide-hematite junction by employing an annealing treatment and growing a layer of a conductive polyaniline polymer on the electrode surface, which decreases electron-hole recombination.

Tailoring Membrane Nanostructure and Charge Density for High Electrokinetic Energy Conversion Efficiency.

The electrokinetic energy conversion (EKEC) of hydraulic work directly into electrical energy has been investigated in charged polymeric membranes with different pore charge densities and characteristic diameters of the nanoporous network. The membranes were synthesized from blends of nitrocellulose and sulfonated polystyrene (SPS) and were comprehensively characterized with respect to structure, composition, and transport properties. It is shown that the SPS can be used as a sacrificial pore generation medium to tune the pore size and membrane porosity, which in turn highly affects the transport properties of the membranes. Furthermore, it is shown that very high EKEC efficiencies (>35%) are encountered in a rather narrow window of the properties of the nanoporous membrane network, that is, with pore diameters of ca. 10 nm and pore charge densities of 4.6 × 10(2) to 1.5 × 10(3) mol SO3(-) m(-3) for dilute solutions (0.03 M LiCl). The high absolute value of the efficiency combined with the determination of the optimal membrane morphology makes membrane-based EKEC devices a step closer to practical applications and high-performance membrane design less empirical.

High electrokinetic energy conversion efficiency in charged nanoporous nitrocellulose/sulfonated polystyrene membranes.

The synthesis, characterization, and electrokinetic energy conversion performance have been investigated experimentally in a charged polymeric membrane based on a blend of nitrocellulose and sulfonated polystyrene. The membrane is characterized by a moderate ion exchange capacity and a relatively porous structure with average pore diameter of 11 nm. With electrokinetic energy conversion, pressure can be converted directly into electric energy and vice versa. From the electrokinetic transport properties, a remarkably large intrinsic maximum efficiency of 46% is found. It is anticipated that the results are an experimental verification of theoretical models that predict high electrokinetic energy conversion efficiency in pores with high permselectivity and hydrodynamic slip flow. Furthermore, the result is a promising step for obtaining efficient low-cost electrokinetic generators and pumps for small or microscale applications.

Solvothermal synthesis, multi-temperature crystal structures and physical properties of isostructural coordination polymers, 2C4H12N+[M3(C8H4O4)4]2-.3C5H11NO, M = Co, Zn.

Two isostructural metal organic framework (MOF) structures have been synthesized by solvothermal methods and examined by single-crystal X-ray diffraction. A microcrystal of 2C4H12N+[Co3(C8H4O4)4]2-.3C5H11NO (1) was investigated at T = 120 K using synchrotron radiation. 2C4H12N+[Zn3(C8H4O4)4]2-.3C5H11NO (2) was investigated at multiple temperatures (T = 30, 100, 200 and 300 K) on a conventional diffractometer. The thermal expansion of the structure of (2) is anisotropic and along the a axis, which corresponds to the metal chain direction. The structures contain anionic frameworks with cations and solvent molecules trapped in the voids. The magnetic susceptibility (chi) and heat capacity (C(p)) have been measured from 1.8 to 350 K. Compound (1) orders ferromagnetically with a broad phase transition observed in C(p) at approximately 6 K. The magnetic moment reaches a value of 3 micro(B) per Co at 2 K in a magnetic field of 9 T, and a Curie-Weiss fit to chi(T) gives an effective moment (mu(eff)) of 4.2 mu(B) and a Weiss temperature (theta) of 23 K. The exchange mechanism for the magnetic coupling is suggested to involve the Co-O-Co bridges in the individual three-metal-atom subchains. The three-dimensional magnetism presumably is due to super-exchange through two out of the three unique C8H4O4 linker molecules, which have the carboxylate and benzene pi systems well aligned.

Synthesis, physical properties, multitemperature crystal structure, and 20 K synchrotron X-ray charge density of a magnetic metal organic framework structure, Mn3(C8O4H4)3(C5H11ON)2.

A new magnetic metal organic framework material has been synthesized, Mn3(C8O4H4)3(C5H11ON)2, 1. Magnetic susceptibility measurements from 2 to 400 K reveal anti-ferromagnetic ordering at approximately 4 K and a total magnetic moment of 6.0 micro(B). The magnetic phase transition is confirmed by heat capacity data (2-300 K). The crystal structure is studied by conventional single-crystal X-ray diffraction data at 300, 275, 250, 225, 200, 175, 150, 125, and 100 K, and synchrotron data at 20 K. There is a phase transition between 100 and 20 K due to ordering of the diethylformamide molecules. The X-ray charge density is determined based on multipole modeling of a second 20 K single-crystal synchrotron radiation data set. The electron distributions around the two unique Mn centers are different, and both have substantial anisotropy. Orbital population analysis reveals large electron donation (1.7 e) to each Mn atom and the maximum possible number of unpaired electrons is 3.2 for both Mn sites. Thus, there is a considerable orbital component to the magnetic moment. Bader topological analysis shows an absence of Mn-Mn bonding, and the magnetic ordering is via super-exchange through the oxygen bridges. Formal electron counting suggests Mn2+ sites, but this is not supported by the Bader atomic charges, Mn1 = +0.11 e, Mn2 = +0.17 e. The topological measures show the dominant metal-ligand interactions to be electrostatic, and a simple exponential correlation is derived between Mn-O bond lengths and the values of nabla2rho at the bond critical points.

Two new cobalt-zinc orthophosphate monohydrates: hydrothermal synthesis, crystal structures and thermal investigation.

Two new cobalt zinc orthophosphate hydrates with similar chemical formula, (CoxZn(1-x))3(PO4)2.H2O, but different composition and structure, have been prepared by systematic hydrothermal synthesis from the system nCo(CH3COO)2 : (1 -n)Zn(CH(3)COO)2 : 3.5H3PO4 : 2.1(CH3)2NH(CH2)3NH2:144H2O (0