Predictive computational models for assessing the impact of co-milling on drug dissolution.

Co-milling is an effective technique for improving dissolution rate limited absorption characteristics of poorly water-soluble drugs. However, there is a scarcity of models available to forecast the magnitude of dissolution rate improvement caused by co-milling. Therefore, this study endeavoured to quantitatively predict the increase in dissolution by co-milling based on drug properties. Using a biorelevant dissolution setup, a series of 29 structurally diverse and crystalline drugs were screened in co-milled and physically blended mixtures with Polyvinylpyrrolidone K25. Co-Milling Dissolution Ratios after 15 min (COMDR15 min) and 60 min (COMDR60 min) drug release were predicted by variable selection in the framework of a partial least squares (PLS) regression. The model forecasts the COMDR15 min (R2 = 0.82 and Q2 = 0.77) and COMDR60 min (R2 = 0.87 and Q2 = 0.84) with small differences in root mean square errors of training and test sets by selecting four drug properties. Based on three of these selected variables, applicable multiple linear regression equations were developed with a high predictive power of R2 = 0.83 (COMDR15 min) and R2 = 0.84 (COMDR60 min). The most influential predictor variable was the median drug particle size before milling, followed by the calculated drug logD6.5 value, the calculated molecular descriptor Kappa 3 and the apparent solubility of drugs after 24 h dissolution. The study demonstrates the feasibility of forecasting the dissolution rate improvements of poorly water-solube drugs through co-milling. These models can be applied as computational tools to guide formulation in early stage development.

Development of immediate-release formulation with reliable absorption of rivaroxaban in various meal regimes.

The bioavailability of rivaroxaban at the higher doses (15 and 20 mg) is considerably reduced when the drug is administered on an empty stomach. This can lead to inadequate anticoagulant effect, and therefore, it is recommended to use the higher doses at fed state. However, proper posology may represent a barrier for some patients. Therefore, the aim of this study was to evaluate innovative rivaroxaban-containing formulations designed to eliminate the food effect to ensure reliable absorption and thus to improve patient adherence with the treatment. Three prototypes (Cocrystal, HPMCP and Kollidon) with rivaroxaban were developed and their bioavailability and food effect in comparison to the reference product was tested in open label, randomized, single oral dose, crossover studies, where test products were administered under fasting and fed conditions and the reference product was administered under fed conditions. Comparable bioavailability for all tested prototypes both under fed and fasting conditions was demonstrated as the 90% confidence intervals of the geometric mean ratios for area under the concentration-time curve remained within the standard acceptance range of 80.00%-125.00%. An innovative immediate release form of rivaroxaban with no food effect on drug bioavailability has been developed, which may represent an important step toward increasing adherence, improving treatment outcome and reducing health care costs.

Dasatinib anhydrate containing oral formulation improves variability and bioavailability in humans.

Dasatinib monohydrate indicated for the treatment of chronic myeloid leukemia displays pH-dependent solubility. The aim of reported development program of novel dasatinib anhydrate containing formulation was to demonstrate improved absorption and lower pharmacokinetic variability compared to dasatinib monohydrate. In a bioavailability study comparing formulations containing 110.6 mg and 140 mg of dasatinib as anhydrate and monohydrate, respectively, both Cmax and AUC of dasatinib were within standard 80.00-125.00% range, while the intra- and inter-subject variability for AUC0-inf after the test product was approximately 3-fold and 1.5-fold less than after the reference, respectively.In a drug-drug interaction study, omeprazole 40 mg reduced the mean AUC0-inf of dasatinib by 19%, when the test was ingested 2 h before the 5th omeprazole dose. This decrease of exposure is clinically irrelevant and substantially less than after the reference. Co-prescription analysis supports the importance of pH-dependent solubility of dasatinib, as >21% of patients were treated concomitantly with a PPI and dasatinib despite warnings against this co-medication in the SmPC.The novel dasatinib anhydrate containing formulation demonstrated improved absorption and less pharmacokinetic variability compared to dasatinib monohydrate product, which may translate into improved clinical outcomes, although this needs to be proven by an appropriate trial.

Polymer-embedded deep eutectic solvents (PEDES) as a novel bio-enabling formulation approach.

There is a growing interest in using deep eutectic solvents (DES) as a pharmaceutical delivery system for poorly water-soluble compounds. To reduce the risk of drug precipitation following oral administration, this study addresses the hypothesis that directly including a polymeric precipitation inhibitor (PI) in a DES mixture could obtain a polymer-embedded deep eutectic system (PEDES) as a novel bio-enabling formulation principle. Following broad formulation screening, a PEDES embedding 15% w/w of polyvinyl pyrrolidone K30 (PVP) in L-carnitine:ethylene glycol (1:4, molar ratio) DES was successfully formulated as a supersaturating formulation using indomethacin as model compound. The drug solubility of 175.6 mg/mL obtained in DES was remarkably high, and upon release (phosphate buffer, pH 6.5) a maximum supersaturation factor of 9.8 was recorded, whereby the release kinetics displayed a suitable "parachute effect". The formulation was further characterized to include a molecular dynamics simulation. It can be concluded that PEDES appears to be a viable novel formulation approach, setting solid grounds for further research to assess the full potential of this novel type of supersaturating drug delivery system.

Serum and lymph pharmacokinetics of nilotinib delivered by yeast glucan particles per os.

Nilotinib is a selective tyrosine-kinase inhibitor approved for the treatment of chronic myeloid leukemia. It is poorly soluble in aqueous media and has a low oral bioavailability. Nilotinib encapsulation into yeast glucan particles (GPs) was investigated in this work as a means of increasing bioavailability. The amorphization of nilotinib in GPs resulted in an increased dissolution rate, which was confirmed by in vitro experiments using biorelevant dissolution media. Simultaneously, GPs containing nilotinib were effectively taken up by macrophages, which was quantified in vitro on cell cultures. The overall oral bioavailability in a rat model was approximately 39 % for nilotinib delivered in a reference formulation (Tasigna) and was almost doubled when delivered in GPs. The contribution of glucan particles to the lymphatic transport of nilotinib was quantified. When delivered by GPs, cumulative nilotinib absorption via the lymphatic system increased by a factor of 10.8 compared to the reference, but still represented arelative bioavailability of only 1.12 %. The cumulative uptake of GPs in the lymph was found to be 0.54 mg after a single dose of 50 mg. Yeast glucan particles can therefore serve as a drug delivery vehicle with a dual function: dissolution rate enhancement by amorphization, and, to asmaller extent, lymphatic delivery due to macrophage uptake.

Pharmaceutical Product Characterization and Manufacturability of Surfactant-Enriched Oil Marbles with Abiraterone Acetate.

The present study investigates the physicochemical properties and stability of a novel lipid-based formulation-surfactant-enriched oil marbles containing abiraterone acetate. While the biopharmaceutical performance of this formulation has been reported recently, this study aims to fill the gap between a promising in vivo performance and industrial applicability. A series of techniques were employed to assess the solid-state characteristics of oil marble cores along with their physicochemical properties upon stability testing. The chemical stability of abiraterone acetate in the formulation was also investigated. The core of the formulation was found to be stable both physically and chemically over 12 months of storage. The in vitro performance of stressed samples was evaluated using a dissolution experiment. The formulation has successfully self-emulsified upon incubation in bio-relevant media, resulting in a fast and complete API release. An important issue connected with the excipient used as a covering material of oil marbles has been identified. The seemingly insignificant water sorption caused agglomeration of the oil marbles and consequently compromised the dissolution rate in some of the stressed samples. Replacing HPMC with lactose as a covering material resulted in more favorable properties upon storage. Overall, it has been shown that oil marbles are an industrially applicable concept of the solidified lipid-based formulation.

Increasing the efficacy of abiraterone - from pharmacokinetics, through therapeutic drug monitoring to overcoming food effects with innovative pharmaceutical products.

Current guidelines suggest radiotherapy as a first-line treatment for prostate cancer, along with prostatectomy, and androgen deprivation therapy. Abiraterone is a first-in-class medicinal product recommended in the treatment of metastatic castration resistant prostate cancer (mCRPC) that targets androgen receptors and inhibits systemic synthesis. However, successful therapy with this drug may pose some challenges. It has to be administered as an inactive prodrug - abiraterone acetate. It is also dissolved and absorbed poorly with large interindividual variability and exhibits considerable food effects. Additionally, the recommended daily dose of the drug is high (1000 mg abiraterone acetate), and the cost of the therapy is burdensome. The following review focuses on the strategies to optimize therapy with abiraterone acetate. First, it summarizes current findings on abiraterone pharmacokinetics and accentuates the need for utilizing therapeutic monitoring in clinical practice. Next, it extensively describes the options for improving the low bioavailability of the drug. The two major approaches are the utilization of the positive food effect to increase the exposure and development of supergenerics. The review emphasizes how different formulation approaches lead to increased solubility and impact the outcomes of pre-clinical and clinical trials. The review concludes with a discussion on possible future directions that may lead to the increase of the therapeutic efficacy of abiraterone.

Drug loading to mesoporous silica carriers by solvent evaporation: A comparative study of amorphization capacity and release kinetics.

The sorption of poorly aqueous soluble active pharmaceutical ingredients (API) to mesoporous silica carriers is an increasingly common formulation strategy for dissolution rate enhancement for this challenging group of substances. However, the success of this approach for a particular API depends on an array of factors including the properties of the porous carrier, the loading method, or the attempted mass fraction of the API. At present, there is no established methodology for the rational selection of these parameters. In the present work, we report a systematic comparison of four well-characterised silica carriers and seven APIs loaded by the same solvent evaporation method. In each case, we find the maximum amorphization capacity by x-ray powder diffraction analysis and measure the in vitro drug release kinetics. For a selected case, we also demonstrate the potential for bioavailability enhancement by a permeation essay.

Monitoring of particle sizes distribution during Valsartan precipitation in the presence of nonionic surfactant.

Particle size is a key parameter when dealing with drug particle formation, delivery or dissolution. The correct measurement of particle size depends on various factors, such as sample preparation or dilution, but also on the choice of method for its characterization. In this work, we study the process of precipitation of poorly water-soluble drug Valsartan from supersaturated solution in the presence of nonionic surfactant Tween 20. Several techniques including dynamic light scattering (DLS) operated in several measuring modes, optical microscope (OM) and static light scattering (SLS) were used to analyze the kinetics of particle formation. As concluded by the results, the increase in turbidity of the solution seriously limits the application of classical DLS to properly measure the particle size and polydispersity. One way to get around this restriction is by dilution, which however results in a decrease in the size of Valsartan particles in the studied population. In contrast, here we present for a first time technique based on modulated 3D cross correlation DLS equipped with the sample goniometer to determine size of submicron particles of the drug in highly turbid solutions. Additionally, a modified OM was used to measure micron-sized particles for samples without any dilution in a continuous mode. Measured particle sizes combined with measured Valsartan concentration allowed us to identify mechanism responsible for the particle formation from supersaturated solutions. The main mechanism, as it is shown in this work, is covering surface of precipitate particles by the amount of used Tween 20.

Bioavailability Enhancement and Food Effect Elimination of Abiraterone Acetate by Encapsulation in Surfactant-Enriched Oil Marbles.

Abiraterone acetate has limited bioavailability in the fasted state and exhibits a strong positive food effect. We present a novel formulation concept based on the so-called oil marbles (OMs) and show by in vitro and in vivo experiments that the food effect can be suppressed. OMs are spherical particles with a core-shell structure, formed by coating oil-based droplets that contain the dissolved drug by a layer of powder that prevents the cores from sticking and coalescence. OMs prepared in this work contained abiraterone acetate in the amorphous form and showed enhanced dissolution properties during in vitro experiments when compared with originally marketed formulation of abiraterone acetate (Zytiga®). Based on in vitro comparison of OMs containing different oil/surfactant combinations, the most promising formulation was chosen for in vivo studies. To ensure relevance, it was verified that the food effect previously reported for Zytiga® in humans was translated into the rat animal model. The bioavailability of abiraterone acetate formulated in OMs in the fasted state was then found to be enhanced by a factor of 2.7 in terms of AUC and by a factor of 4.0 in terms of Cmax. Crucially, the food effect reported in the literature for other abiraterone acetate formulations was successfully eliminated and OMs showed comparable extent of bioavailability in a fed-fasted study. Oil marbles therefore seem to be a promising formulation concept not only for abiraterone acetate but potentially also for other poorly soluble drugs that reveal a positive food effect.

Investigation of tablet disintegration pathways by the combined use of magnetic resonance imaging, texture analysis and static light scattering.

Efficient tablet disintegration is a pre-requisite for fast and complete drug dissolution from immediate release formulations. While the overall tablet disintegration time is a routinely measured quality attribute of pharmaceutical products, little attention is usually paid to the analysis of disintegration fragments and the cascade of elementary steps that lead to their formation. In this work, we investigate the disintegration pathways of directly compressed tablets by a unique combination of three methods: (i) magnetic resonance imaging (MRI), to gain insight into structural changes of tablets during disintegration; (ii) texture analysis, to measure the disintegration kinetics; and (iii) static light scattering, to characterise the size distribution of disintegration fragments. By systematically varying the tablet composition (50-90% of ibuprofen as a model active ingredient, 0-4% of croscarmellose sodium disintegrant, 6-50% of lactose monohydrate filler), a relationship between the tablet formulation, the size distribution of the disintegration fragments and the dissolution rate of the active ingredient has been established. To interpret the experimental observations, we analyse the disintegration fragments by Raman mapping and relate their composition and structure to the micro-scale arrangement of individual formulation components inside the tablet.

Identification and Pharmaceutical Characterization of a New Itraconazole Terephthalic Acid Cocrystal.

The crystallization of poorly soluble drug molecules with an excipient into new solid phases called cocrystals has gained a considerable popularity in the pharmaceutical field. In this work, the cocrystal approach was explored for a very poorly water soluble antifungal active, itraconazole (ITR), which was, for the first time, successfully converted into this multicomponent solid using an aromatic coformer, terephthalic acid (TER). The new cocrystal was characterized in terms of its solid-state and structural properties, and a panel of pharmaceutical tests including wettability and dissolution were performed. Evidence of the cocrystal formation was obtained from liquid-assisted grinding, but not neat grinding. An efficient method of the ITR-TER cocrystal formation was ball milling. The stoichiometry of the ITR-TER phase was 2:1 and the structure was stabilized by H-bonds. When comparing ITR-TER with other cocrystals, the intrinsic dissolution rates and powder dissolution profiles correlated with the aqueous solubility of the coformers. The rank order of the dissolution rates of the active pharmaceutical ingredient (API) from the cocrystals was ITR-oxalic acid > ITR-succinic acid > ITR-TER. Additionally, the ITR-TER cocrystal was stable in aqueous conditions and did not transform to the parent drug. In summary, this work presents another cocrystal of ITR that might be of use in pharmaceutical formulations.

Preclinical evaluation of new formulation concepts for abiraterone acetate bioavailability enhancement based on the inhibition of pH-induced precipitation.

Abiraterone acetate is a potent drug used for the treatment of metastatic castration resistant prostate cancer. However, currently marketed product containing crystalline abiraterone acetate exhibits strong positive food effect which results in strict dosing regimen. In the present work, a rational approach towards design of novel abiraterone acetate formulations that would allow increased bioavailability on a fasting stomach and thus decreased food effect is presented. Precipitation experiments in biorelevant media were designed to assess pH induced precipitation of the drug and a pool of polymeric excipients was then screened for their potential to inhibit precipitation. The best performing polymeric excipients were subsequently used as carriers for the preparation of amorphous solid dispersions. Two main approaches were followed in order to formulate the drug. The first approach relies on the suppression of precipitation from a supersaturated solution whereas the second one is based on the hypothesis that when the release of the drug is tuned, optimal uptake of the drug can be reached. Optimized formulation prototypes were tested in a rat animal model in an incomplete block, randomized bioequivalence study to assess their relative bioavailability under fasting conditions. We show that both formulation approaches lead to increased bioavailability of abiraterone acetate on a fasting stomach with bioavailability in rats being enhanced up to 250% compared to the original drug product containing crystalline drug.

Effect of solvent selection on drug loading and amorphisation in mesoporous silica particles.

Increasing the dissolution rate of poorly water-soluble active pharmaceutical ingredients (APIs) is a key strategy used for improving their oral bioavailability. One of the formulation approaches is API loading to mesoporous carrier particles, which can increase the dissolution rate through the combination of improved powder wettability and dispersion, higher surface area, and API conversion from crystalline to the amorphous state. From the formulation process point of view, the maximum achievable drug loading is a crucial parameter, which depends on the loading method. Drug loading by sorption from a solution is a technologically attractive approach, since it involves familiar unit operations (mixing, filtration, drying). However, the success of the equilibrium sorption approach depends on the choice of the solvent. In this work we present an experimental study of loading efficiency to mesoporous silica particles, based on a set of 10 APIs combined with 6 different solvents at a range of concentrations. We show that due to the competitive nature of the adsorption process, the solvent with the highest API solubility is not necessarily the best candidate for maximising the API loading. Based on the investigated drug-solvent combinations, we show that the dielectric constant of the solvent is a good predictor of loading efficiency and can be used as a general guideline for solvent selection. On the other hand, we did not find any systematic correlation between commonly measured API properties such as logP and their loading efficiency.

Virtual Prototyping and Parametric Design of 3D-Printed Tablets Based on the Solution of Inverse Problem.

The problem of designing tablet geometry and its internal structure that results into a specified release profile of the drug during dissolution was considered. A solution method based on parametric programming, inspired by CAD (computer-aided design) approaches currently used in other fields of engineering, was proposed and demonstrated. The solution of the forward problem using a parametric series of structural motifs was first carried out in order to generate a library of drug release profiles associated with each structural motif. The inverse problem was then solved in three steps: first, the combination of basic structural motifs whose superposition provides the closest approximation of the required drug release profile was found by a linear combination of pre-calculated release profiles. In the next step, the final tablet design was constructed and its dissolution curve found computationally. Finally, the proposed design was 3D printed and its dissolution profile was confirmed experimentally. The computational method was based on the numerical solution of drug diffusion in a boundary layer surrounding the tablet, coupled with erosion of the tablet structure encoded by the phase volume function. The tablets were 3D printed by fused deposition modelling (FDM) from filaments produced by hot-melt extrusion. It was found that the drug release profile could be effectively controlled by modifying the tablet porosity. Custom release profiles were obtained by combining multiple porosity regions in the same tablet. The computational method yielded accurate predictions of the drug release rate for both single- and multi-porosity tablets.

Probing the early stages of tablet disintegration by stress relaxation measurement.

Rapid tablet disintegration is a requirement for the efficient dissolution of the active pharmaceutical ingredient (API) from immediate release tablets. From the mechanistic viewpoint, tablet disintegration begins by the wetting of the tablet surface and the ingress of dissolution medium into the tablet pore structure, followed by the loosening of inter-particle bonds. The present work introduces a new methodology for probing and quantifying the early stages of tablet disintegration by stress relaxation measurements using texture analysis (TA). The method is based on applying a pre-defined load on the tablet by means of a needle-shaped probe and measuring the tablet resistance in time after the addition of the dissolution medium. This measurement provides information about the extent and rate of stress relaxation within the tablet upon hydration. Using a tablet formulation containing ibuprofen as the API and lactose as excipient, the effect of the API content, compaction pressure, and pH of the dissolution medium on the stress relaxation rate was systematically investigated. It is shown that using a dissolution medium pre-saturated by the formulation components has only a minor effect on the tablet disintegration rate compared to a pure phosphate buffer, meaning that the surface dissolution of particles within the tablet is not the main pre-requisite of disintegration in this case. On the other hand, pH of the dissolution medium was found to have a very strong effect on the stress relaxation rate in the tablet after wetting, suggesting that van der Waals interactions rather than solid bridges are the predominant particle bonding mechanism in the investigated formulations.

The effect of the composition of a fixed dose combination on bioequivalence results.

The purpose of this work was to develop a new supergeneric product Meloxicam/Omeprazole. Such a combination brings a benefit in terms of decreasing side effects for the patients using meloxicam. The new combination is composed of a meloxicam powder blend (MPB) and omeprazole gastro-resistant pellets (OAP) in hard gelatin capsules. The main tasks were to select the excipients to keep the functional layer of OAP active and to prove the bioequivalence to the original products of meloxicam tablets together with omeprazole capsules. Although dissolution profiles similar to the original product were obtained, the unexpected results of omeprazole low bioavailability in the fed bioequivalence study (BES I) showed the necessity to investigate the formulation in greater depth. A modified more complex dissolution method was developed in order to understand the release of omeprazole under gastric conditions. This method revealed the degradation of omeprazole in the formulation when exposed to the fed conditions because of the increase in microenvironmental pH in the capsule caused by trisodium citrate, commonly used for improving solubility of meloxicam. This pH increase dissolved the gastro-resistant layer of OAP and caused the chemical degradation. To prevent this effect, a trisodium citrate-free formulation was developed. Reformulated capsules passed the repeated fed bioequivalence study (BES II).

The effect of gas-phase polycyclic aromatic hydrocarbons on the formation and properties of biogenic secondary organic aerosol particles.

When secondary organic aerosol (SOA) particles are formed by ozonolysis in the presence of gas-phase polycyclic aromatic hydrocarbons (PAHs), their formation and properties are significantly different from SOA particles formed without PAHs. For all SOA precursors and all PAHs, discussed in this study, the presence of the gas-phase PAHs during SOA formation significantly affects particle mass loadings, composition, growth, evaporation kinetics, and viscosity. SOA particles formed in the presence of PAHs have, as part of their compositions, trapped unreacted PAHs and products of heterogeneous reactions between PAHs and ozone. Compared to 'pure' SOA particles, these particles exhibit slower evaporation kinetics, have higher fractions of non-volatile components, like oligomers, and higher viscosities, assuring their longer atmospheric lifetimes. In turn, the increased viscosity and decreased volatility provide a shield that protects PAHs from chemical degradation and evaporation, allowing for the long-range transport of these toxic pollutants. The magnitude of the effect of PAHs on SOA formation is surprisingly large. The presence of PAHs during SOA formation increases mass loadings by factors of two to five, and particle number concentrations, in some cases, by more than a factor of 100. Increases in SOA mass, particle number concentrations, and lifetime have important implications to many atmospheric processes related to climate, weather, visibility, and human health, all of which relate to the interactions between biogenic SOA and anthropogenic PAHs. The synergistic relationship between SOA and PAHs presented here are clearly complex and call for future research to elucidate further the underlying processes and their exact atmospheric implications.

The Combined Use of Imaging Approaches to Assess Drug Release from Multicomponent Solid Dispersions.

PURPOSE: Imaging methods were used as tools to provide an understanding of phenomena that occur during dissolution experiments, and ultimately to select the best ratio of two polymers in a matrix in terms of enhancement of the dissolution rate and prevention of crystallization during dissolution. METHODS: Magnetic resonance imaging, ATR-FTIR spectroscopic imaging and Raman mapping have been used to study the release mechanism of a poorly water soluble drug, aprepitant, from multicomponent amorphous solid dispersions. Solid dispersions were prepared based on the combination of two selected polymers - Soluplus, as a solubilizer, and PVP, as a dissolution enhancer. Formulations were prepared in a ratio of Soluplus:PVP 1:10, 1:5, 1:3, and 1:1, in order to obtain favorable properties of the polymer carrier. RESULTS: The crystallization of aprepitant during dissolution has occurred to a varying degree in the polymer ratios 1:10, 1:5, and 1:3, but the increasing presence of Soluplus in the formulation delayed the onset of crystallization. The Soluplus:PVP 1:1 solid dispersion proved to be the best matrix studied, combining the abilities of both polymers in a synergistic manner. CONCLUSIONS: Aprepitant dissolution rate has been significantly enhanced. This study highlights the benefits of combining imaging methods in order to understand the release process.

The impact of polymeric excipients on the particle size of poorly soluble drugs after pH-induced precipitation.

Active pharmaceutical ingredients (APIs) with strongly pH-dependent aqueous solubility can face the problem of precipitating from solution when the pH changes from acidic in the stomach to neutral in the intestine. The present work investigates the effect of two polymeric excipients - polyvinylpyrrolidone (PVP) and Soluplus - on the ability to either prevent precipitation, or to control the size distribution of precipitated particles when precipitation cannot be prevented. Two different APIs were compared, Dabigatran etexilate mesylate and Rilpivirine hydrochloride. The effect of excipient concentration on the precipitation behaviour during pH titration was systematically investigated and qualitatively different trends were observed: in case of Soluplus, which forms a micellar solution when critical micelle concentration is exceeded, precipitation was inhibited in the case of Dabigatran etexilate, which partitioned into the micelles. On the other hand, Rilpivirine precipitated independently of Soluplus concentration. In the case of PVP, which does not form micelles, precipitation could not be avoided. Increased polymer concentration, however prevented the aggregation of precipitated particles into larger cluster. The observed effect of PVP was especially pronounced for Rilpivirine. The main conclusion of this study is that a suitably chosen polymeric excipient can either prevent precipitation altogether or reduce the size of the resulting particles. The mechanism of action, however, seems-specific to a given molecule. It was also shown that the polymer-stabilised particles have a potential to redissolve.